RE-USE BOLLARD PROTECT BOLLARD - Smart bollards… · RE-USE BOLLARD If badly impacted bollard is...
Transcript of RE-USE BOLLARD PROTECT BOLLARD - Smart bollards… · RE-USE BOLLARD If badly impacted bollard is...
\\
RE-USE BOLLARD
If badly impacted bollard is removed
and reinstated in seconds (re-using
the bollard, the foundations and the
Smart components again and again!
PROTECT BOLLARD
Built in shock absorbers enable bollards
to absorb impact, (Large bollards
deflect & self-recover) substantially
improving safety and reducing risk of
damage to your bollards.
PROTECT FOUNDATIONS
Impact Recovery System protects
foundations from damage when
bollards are impacted or need
replacing. Lifetime warranty!
Bollards can now be secured using sustainable foundations
When impacted by a vehicle the bollard absorbs impact improving safety, reducing risk of damage to your bollard and
protecting surrounding foundations from damage. Large diameter bollards deflect up to 10 degrees and self-recover. No
springs involved- Bollards cannot be deflected by hand and will not become unstable over time.
Tools required. Surface mount and In-ground designs available (Lifetime Warranty on in-ground version). If badly impacted
the internal post bends at ground level. Bollard is removed (the cheap internal CHS steel securing post is replaced) and the
bollard is reinstated using same components over and over again.
A $200 bollard replaced just once year costs around $25,000.00 over the life of a development to maintain. The major cost
is not buying the item, as a $100 bollard if replaced annually will still cost around $20,000 to maintain. By saving the
foundations and making the bollard removable and re-usable, there are no on-going costs. Brochures available or visit
smarturban.com.au to view videos.
RE-USE BOLLARD
If badly impacted bollard is removed
and reinstated in seconds (re-using
the bollards, the foundations and the
Smart components again and again!
PROTECT BOLLARD
Built in shock absorbers enable bollards
to absorb impact, (Large bollards
deflect & self-recover) substantially
improving safety and reducing risk of
damage to your bollards.
PROTECT FOUNDATIONS
Impact Recovery System protects
foundations from damage when
bollards are impacted or need
replacing. Lifetime warranty!
Index
In-Ground Bollards 5
Sustainable In-ground Bollards
60 mm Bollards 6
MRWA Traffic Bollards 7
100 -168 mm Bollards 8
Surface Mount Bollards 9
Sustainable surface Mount bollards
100 -168 mm Bollards 10
Designer Aluminium Caps 11
Tools 12
How to specify bollard 13
Steel Bollards
GALVNISED PIPE BOLLARDS
60 mm - 2.9 mm wall (5kg)
100 mm - 4 mm wall (10 kg)
140 mm - 5 mm wall (17 kg)
165 mm – 5 mm wall (20 kg)
(150 mm Nominal Bore)
168 mm – 5 mm wall (22 kg)
DESIGNER ALUMINIUM CAPS
165 mm – 5 mm wall (24 kg)
(150 mm Nominal Bore)
IN-GROUND BOLLARDS
60 mm - 2.9 mm wall (8 kg)
100 mm - 4 mm wall (15 kg)
140 mm - 5 mm wall (23 kg)
168 mm – 5 mm wall (28 kg)
MATERIAL
Heavy Duty Pipe Bollard
Australian steel
Galvanised
Standard knock on cap
OPTIONS
Power coated Safety Yellow
Powder coat other colour *
White/Red/White striping
Eye bolts
* Colour chart available
QUALITY POWDER COATING
We use an epoxy undercoat to extend
the lifespan of our powder coating and
provide resistance against chipping and
fading. This involves a 6 step process to
ensure longevity of your bollards.
INSTALLATION OPTIONS
In-Ground
Sustainable In-Ground
Surface Mount
Sustainable Surface Mount
In-ground Bollards
IN-GROUND BOLLARDS
60 mm - 2.9 mm wall (8 kg)
100 mm - 4 mm wall (15 kg)
140 mm - 5 mm wall (23 kg)
168 mm – 5 mm wall (28 kg)
SPECIFICATIONS
Galvanised Steel Bollard
800 mm above ground
500 mm in-ground
Capped with steel cap
INSTALLATION
Base is 600 deep, best installed in 800
deep x 500- 600 wide solid concrete
foundation (not rapid set). Can be
concrete filled * Cap not secured
OPTIONS
Power coated Safety Yellow
White/Red/White striping
Eye bolts
Anchoring pin
165 mm 165 mm
If badly impacted both the bollard and the foundations will need replacing
UNIT INCLUDES
Galvanised Steel Bollard
60 mm diameter
800 mm above ground
Capped with steel cap
OPTIONS
Can be powder coated
Reflective striping
PERMENANT FOUNDATIONS:
350 or 650 mm Ground socket
Self-locking Taper
Cap
TOOLS
Installation tool required to install
sockets
Removal tool required (two options:
Foot removal tool or industrial tool)
DEPTH
If base can be secured to solid concrete
or asphalt foundations a 350 socket will
suffice.
WEIGHT:
Bollard weight: 10 kg
Small diameter Smart Bollards
Foundations remain protected from damage. Keep working for the life of a development
UNIT INCLUDES
Galvanised Steel Bollard
60 mm diameter
800 mm above ground
Capped with steel cap
Power coated Safety Yellow
White/Red/White striping
Made to MRWA Specifications
PERMENANT FOUNDATIONS:
350 or 650 mm Ground socket
Self-locking Taper
Cap
TOOLS
Installation tool required to install
sockets
Removal tool required
DEPTH
If base can be secured to solid concrete
or asphalt foundations a 350 socket will
suffice.
WEIGHT:
Bollard weight: 10 kg
MRWA Smart Traffic Bollards
Foundations remain protected from damage. Keep working for the life of a development
GALVNISED PIPE BOLLARDS
100 mm - 4 mm wall (10 kg)
140 mm - 5 mm wall (17 kg)
168 mm – 5 mm wall (20 kg)
SPECIFICATIONS
800 mm above ground
Capped with steel cap
OPTIONS
Power coated Safety Yellow
Can be powder coated any colour
(ask for colour chart)
White/Red/White striping
FOUNDATIONS
2 x Impact Recovery Rings
Internal securing post
1 X Ground socket 350 or 650 mm
1 x Cap
1 x Security Stud
TOOLS
Security Allen key to remove bollard
Installation tool to install sockets
Removal tool required
DEPTH
If base can be secured to solid concrete or
asphalt foundations a 350 socket will suffice.
WEIGHT:
350 IRS: weight 5 kg
650 IRS: weight 7 kg
In-ground Impact Recovery Bollards
If badly impacted both the bollard and the foundations are re-usable
Surface mount Bollards
GALVNISED PIPE BOLLARDS
60 OD - 2.9 mm- (6kg)
100 mm - 4 mm wall (10 kg)
140 mm - 5 mm wall (17 kg)
168 mm – 5 mm wall (20 kg)
SPECIFICATIONS
Galvanised Steel Bollard
800 mm above ground
Capped with steel cap
Base plate
OPTIONS
Power coated Safety Yellow
Can be powder coated any colour
(ask for colour chart)
White/Red/White striping
BASE PLATE
5 mm thick
250 mm diameter
Secured using impact resistant
concrete anchors (more resistant
to impact than normal anchors)
INSTALLATION
Secured on heavy duty 5 mm base
Plate using 4 Impact resistant
concrete anchors
WEIGHT:
Base: 7 kg
If badly impacted both the bollard and the foundations will need replacing
Surface mount Impact Recovery Bollards
GALVNISED PIPE BOLLARDS
100 mm - 4 mm wall (10 kg)
140 mm - 5 mm wall (17 kg)
168 mm – 5 mm wall (20 kg)
DEFLECTION
100 mm do not deflect
140 -168 deflect 8-10 degrees
SPECIFICATIONS
Galvanised Steel Bollard
800 mm above ground
Capped with steel cap
OPTIONS
Power coated Safety Yellow
Can be powder coated any colour
(ask for colour chart)
White/Red/White striping
IMPACT RECOVERY SYSTEM
2 x Impact Recovery Rings
Internal securing post
Base plate
Security stud
TOOLS
Security Allen key to remove bollard
Installation tool to install sockets
Removal tool required
INSTALLATION
Secured on heavy duty 5 mm base Plate
using 4 Impact resistant concrete anchors
WEIGHT:
Base: 7 kg
Internal Post: 3 kg
165 mm 165 mm
If badly impacted both the bollard and the foundations are re-usable
GALVANISED CAPS
Bollards supplied with standard
galvanized cap unless you specify one
of the designer Aluminium caps
shown below
DESIGNSER ALUMINIUM CAPS
Dome 1 groove
Dome 2 grooves
Flat Cap
Flat cap 1 groove
Flat cap 2 grooves
Designer Aluminium Caps
Installation Tool
The installation tool ensures Smart
sockets are not distorted or pushed
out of alignment during installation
(thus ensuring the socket will
provide over 200 kg of resistance to
unauthorized removal of a bollard)
The tool is inserted into the socket,
and the socket is lowered into the
hole. Alignment is checked and
concrete poured around the socket
to secure.
Removal Tool - industrial
The industrial Removal tool is used
to remove the internal post from the
ground socket (they cannot be
removed with a post puller- this will
pull the entire base from the
ground).
You simply hook the tool around the
internal securing post. The handle
will rise as you do this - Simply move
handle down with jerking action, to
remove post.
Simple foot tool
To enable removal of the internal
post using a simple foot tool a pin is
inserted into the internal securing
post and the foot tool is used to
lever the post from the ground
socket.
Smart Tools
Please note there is some confusion over pipe sizes with many organisations specifying 50 mm and 150 mm, when there is no Steel Pipe of either size. Note 50 mm is the nominal bore or 60.3 OD CHS Steel and 150 mm is the nominal bore of 165 mm O.D. It is much safer to specify the O.D. to make sure you are getting the size bollard you want. Also- check the wall thickness as this will determine the strength of your bollard. If unsure- ask for our pipe reference chart.
EG: 150 mm (165 O.D) Galvanised steel bollard. Installed on In-ground Impact Recovery System 650 mm
depth. Removed using Foot tool. Extras: reflective striping & powder Coated. Colour: Safety Yellow.
CAP
Galvanised steel GALV
Designer Cap Flat DCF
Designer Cap Flat single collar DCF-1
Designer Cap Flat double collar DCF-2
Designer Dome single collar DCD-1
Designer Dome double collar DCD-2
INSTALLATION
In-ground IG
Sustainable In-ground IRS-IG
Surface Mount SM
Sustainable surface mount IRS-SM
CHOSEN TOOLS
Foot Tool FOOT
Industrial Tools IND TOOL
EXTRAS
Powder Coated PC
Reflective Striping RS
Nylon Washer NW
Eye bolts E
Colour Use Colour chart
Smart Urban Pty Ltd
6/83 Kent Way,Malaga,WA 6090
Ph: 08 9248 5545 E: [email protected] W: smarturban.com.au
Codes to specify bollard