ﬁre safety catalogue - ZENER FIRE product catalogue.pdfextinguisher range – you’ve ... BS EN3...

fire safety catalogue

extinguishers and trolley units

ancilliary items

brigade equipment

detection and alarms

extinguishers 2-10extinguishers and trolley units

ancilliary items

brigade equipment


The Gloria brand is recognised by the independent fire trade as a product of renowned quality.

Fully approved to relevant British and European standards with a proven track record of durability and reliability – the Gloria range offers customers true peace of mind.

With both stored pressure and cartridge operated extinguishers available, to cover practically any type of fire risk, you needn’t waste time searching for a complete extinguisher range – you’ve just found it.

Items in this catalogue are available at the time of publication but we reserve the right to change our product range and/or product specification anytime.

SECTION 1

Fire Power Extinguishers 2-8

Trolley Units 9-10

1

EXTINGUISHERS22

All Water General

■ Easy squeeze grip operation

■ Fully refillable

■ Controlled discharge

■ Internal polyethylene lining

■ Wall mount bracket included

■ Strong protective base

■ Robust discharge hose

■ Jet nozzle

For Stored Pressure (Water additive only)

■ Weight and ease of use advantages

■ Effective spray application

■ Spray nozzle

■ Have passed the 35kv conductivity discharge test

Water ExtinguishersStored Pressure/Cartridge Operated

SpecificationsSP

Water

SPWater

Additive

SP Water

Additive

CO Water

Model: W9DN W3DX W6DX WI9DB

Item number: 4903/207 4918/207 4919/207 4904/207

Capacity 9ltr 3ltr 6ltr 9ltr

Fire rating 13A 13A 21A 13A

Height (mm) 620 435 533 568

Cylinder diameter (mm) 200 160 180 183

Overall width (mm) 280 275 230 216

Filled weight (kg) 14.3 4.4 12.6 8

Range of throw (m) 7-8 4 4 4-6

Duration of discharge (secs) 60 30 60 45

Working pressure (bar) 7 7 7 14

Temperature range (°c) 0 to +60 +5 to +60 +5 to +60 0 to +60

BS EN3 approved Y Y Y Y

Med approved Y Y

Port

able

Fir

e Ex

tin

gu

ish

ers4

Sect

ion

1

EXTINGUISHERS

Type AFFF AFFF AFFF Foam Foam Foam Spray Spray Spray S/P S/P S/P

AFFFFoamSpray

S/P

Foam ExtinguishersStored Pressure/Cartridge Operated

Specifications SPFoam

SPFoam

SPFoam

SPFoam

COFoam

COFoam

SP Foam(shrouded

head)

Model: SD2LW S3DLWB S6DLWB S9DLWB SI6DB SI9DB S2LW

Item number: 4260/207 4257/207 4251/207 4252/207 4253/207 4254/207 4256/207

Capacity 2ltr 3ltr 6ltr 9ltr 6ltr 9ltr 2ltr

Fire rating 5A 55B 8A 89B 13A 183B 21A 183B 13A 233B 21A 233B 5A 70B

Height (mm) 365 485 455 610 610 623 365

Cylinder diameter (mm) 108 165 170 200 160 200 110

Overall width (mm) 145 270 260 260 270 285 152

Filled weight (kg) 3.5 5.9 10.5 14.9 7 8 3.5

Range of throw (m) 2.5 4 4-6 4-6 4-6 4-6 2

Duration of discharge (secs) 22 14 36 53 26 49 20

Working pressure (bar) 15 7 7 7 14 8 15

Temperature range (°c) 0 to +60 +5 to +60 0 to +60 0 to +60 0 to +60 0 to +60 0 to +60

BS EN3 approved Y Y Y Y Y Y Y

Med approved Y Y Y

For Shrouded Head Foam (Below)

■ Unique push button operation

■ Wire transport bracket and securing strap included

All Foam General


■ Fully refilable


■ Internal polyethylene lining


■ Strong protective base*


■ Spray nozzle

■ Have passed the 35kv conductivity discharge test

*Excludes 2ltr models

Port

able

Fir

e Ex

tin

gu

ish

ers4

Sect

ion

1

3

EXTINGUISHERS

Powder ExtinguishersStored Pressure/Cartridge Operated

SpecificationsSP

PowderSP

PowderSP

PowderSP

PowderSP

PowderSP

Powder

Model: PD1GA PD2G PD4GA PD6GA PD9GA PD12GA

Item number: 4358/207 4352/207 4354/207 4356/207 4359/207 4366/207

Capacity 1kg 2kg 4kg 6kg 9kg 12kg

Fire rating 5A 34B 13A 89B 21A 113B 27A 183B 43A 233B 55A 233B

Height (mm) 280 408 415 505 605 590

Cylinder diameter (mm) 95 108 160 160 200 210

Overall width (mm) 135 170 310 285 305 265

Filled weight (kg) 1.5 3.2 6.7 9.1 13.6 17.3

Range of throw (m) 4 4 6 6 7 7

Duration of discharge (secs) 8 10 12 16 16 22

Working pressure (bar) 15 15 15 15 15 15

Temperature range (°c) -30 to +60 -30 to +60 -30 to +60 -30 to +60 -30 to +60 -30 to +60

BS EN3 approved Y Y Y Y Y Y

Med approved Y** Y Y Y

All Powder General




■ Multi-purpose application

■ 1 & 2kg C/W wire transport bracket and securing strap

■ 6,9 & 12kg C/W wall mounting bracket

■ Strong protective base*

■ Robust discharge hose (4,6,9 & 12kg)

*Excludes 1kg and 2kg models

**For Lifeboat use only

Pow

der

Ext

ing

uis

her

s4Se

ctio

n 1

4

EXTINGUISHERS

SpecificationsSP Powder

(Shrouded Head)SP Powder

(Shrouded Head)CO

PowderCO

Powder

Model: P1GM P2GM PEP6GA PEP12GA

Item number: 4351/207 4362/207 4360/207 4368/207

Capacity 1kg 2kg 6kg 12kg

Fire rating 8A 34B 13A 89B 27A 144B 43A 233B

Height (mm) 267 315 540 640



Filled weight (kg) 1.5 3.5 10.1 19

Range of throw (m) 4 4 6 7


Working pressure (bar) 15 15

Temperature range (°c) -30 to +60 -30 to +60 -20 to +60 -20 to +60

BS EN3 approved Y Y Y Y

Med approved Y** Y** Y Y

For Shrouded Head Powder

■ Unique push button operation

■ Compact with easy operation

■ Carrying handle

■ Integrated, protected, pressure gauge



■ C/W bracket and securing strap

**For Lifeboat use only

Cartridge Operated Powder


■ Fully refilable


■ Multi-purpose application

■ Heavy duty brass head assembly

■ C/W wall mount bracket



Powder ExtinguishersStored Pressure/Cartridge Operated

Wat

er E

xtin

gu

ish

ers4

Sect

ion

1

5

EXTINGUISHERS

CO2 ExtinguishersStored Pressure

SpecificationsSP

CO2SP

CO2SP

CO2

Model: C20G C20GH C50G

Item number: 4705/207 4706/207 4707/207

Capacity 2kg 2kg 5kg

Fire rating 34B 55B 70B

Height (mm) 490 490 750

Cylinder diameter (mm) 117 117 152

Overall width (mm) 180 180 310

Filled weight (kg) 4.93 4.93 11.59

Range of throw (m) 4 4 4

Duration of discharge (secs) 8 9 14

Working pressure (bar) 56 56 56

Temperature range (°c) -30 to +60 -30 to +60 -30 to +60

BS EN3 approved Y Y Y

Med approved Y


■ Fully refilable



■ C20GH offers 55B rating & safe to handle horn

■ Lightweight aluminium cylinder

co2

Exti

ng

uis

her

s4Se

ctio

n 1

6

EXTINGUISHERS 7

D-Class Powder ExtinguishersCartridge Operated

F-ClassStored Pressure


■ Fully refilable


■ Lance applicator

■ Specifically designed for use on metal fires



SpecificationsCO

Powder D-ClassCO

F-Class

Model: P12M W6DRC

Item number: 4367/207 4500/207

Capacity 12kg 6ltr

Fire rating D 13A 75F

Height (mm) 685 533

Cylinder diameter (mm) 218 180

Overall width (mm) 306 242

Filled weight (kg) 21 11.8

Range of throw (m) 7 4

Duration of discharge (secs) 20 43

Working pressure (bar) 15 7

Temperature range (°c) -20 to +60 0 to +60

BS EN3 approved Y Y

Med approved


■ Fully refilable


■ Lance applicator

■ Specifically designed for use on cooking oil fires

■ Solution reacts with oil to prevent re-ignition


D-C

lass

& F

-Cla

ss E

xtin

gu

ish

ers4

Sect

ion

1

EXTINGUISHERS8

SpecificationsSP

WaterSP

WaterSP

FoamSP

FoamSP

CO2

Model: FPW6S FPW9S FPF6S FPF9S C20G

Item number: 4905/207 4906/207 4217/207 4218/207 4705/06

Capacity 6ltr 9ltr 6ltr 9ltr 2kg

Fire rating 13A 21A 13A 144B 21A 183B 34B

Height (mm) 500 640 500 640 490

Cylinder diameter (mm) 180 180 180 180 117

Overall width (mm) 300 300 300 300 180

Filled weight (kg) 8.63 12.22 8.63 12.22 4.93

Range of throw (m) >4 >4 >4 >4 4

Duration of discharge (secs) 40 60 25 40 8

Working pressure (bar) 15 bar 15 bar 15 bar 15 bar 56

Temperature range (°c) 0 to 60 0 to 60 0 to 60 0 to 60 -30 to +60

BS EN3 approved

Med approved

■ Ideal for environments where hygiene is paramount when considering architecture

■ Highly polished surface finish

■ Corrosion resistant construction

■ Simple “seize and squeeze” operation

■ Controllable discharge assures efficient use of content and minimises clean-up

■ All extinguishers are re-chargeable

Exti

ng

uis

her

s4Se

ctio

n 1

Stainless Steel ExtinguishersStored Pressure

Polished ExtinguisherStored Pressure

EXTINGUISHERS 9

■ Mobile & stable

■ Solid tyred steel wheels

■ Space-saving design


■ Single operator required

■ CE marked

■ Precision built mechanical pressure gauge for accurate pressure reading

■ High grade brass head ensures reliability & optimises efficiency

SpecificationsSP

PowderSP

PowderCO

PowderCO

Foam

Model: PD25 PD50 P50G LW50

Item number: UTR00008 UTR00009 UTR00007 / UTR00006 UTR00005

Capacity 25kg 50kg 50kg 50ltr

Height (mm) 1004 1130 1070 595



Filled weight (kg) 45 82 100 12

Range of throw (m) 10-12 65


Working pressure (bar) 14 0 to +50

Temperature range (°c) -20 to +60 C/W 5m hose

Available with 5 & 10m hose

BS EN3 approved

Med approved

Tro

lley

Exti

ng

uis

her

s4Se

ctio

n 1

■ Weather-resistant polyester paint finish

■ Safety valve

■ Easy to maintain

Powder/Foam Trolley UnitsStored Pressure/Catridge Operated

EXTINGUISHERS10

■ Approval to DIN EN 3

■ Cylindrical snow horn for effective fire fighting

■ Mobile & stable


■ Additional handles on snow horn for optimal performance

CO2 Trolley UnitsStored Pressure

SpecificationsSP

CO2SP

CO2SP

CO2SP

CO2

Model: KS10 KS20 KS30 KS50

Item number: UTR00000 UTR00001 UTR0003 / UTR0002 UTR0004

Capacity 10kg 20kg 30kg 50kg

Fire rating 113B 144B B 5 x 144B

Height (mm) 1040 1210 1520 1590


Overall width (mm) 480 480 1540 1100

Filled weight (kg) 45 72.4 110 150

Range of throw (m) 4-5 5.5 4-5 4-5


Working pressure (bar) 58 58 58 56

Temperature range (°c) -20 to +60 -20 to +60 -20 to +60 -20 to +60

C/W 6m hose C/W 6m hose Available with 6 & 10m hose C/W 6m hose

BS EN3 approved

Med approved

Tro

lley

Exti

ng

uis

her

s4Se

ctio

n 1

FIREBLANPull tabs down

and outwardsCover burning

material completely

L TABS TOE BLANKET

Kitemark NoKM 506560BS EN 1869:199

81/02338

witch off heat and

ave covered until coo

KET

ancillary items 11-18extinguishers and hose reels

ancilliary items

brigade equipment


SECTION 2

Fire Blankets 12Cabinets 12-13Covers 14Stands 14Fire Points 15Panic Bolts, Key Box and Latches 16-17Dorgard 17Escape Ladders 17Alarm Bell 17Fire Buckets 18Domestic Extinguishers 18First Aid Kits 18

2

ANCILLARY ITEMSFi

re B

lan

kets

an

d C

abin

ets4

Sect

ion

212

A range of top quality slim fire blankets. Suitable for smothering and extinguishing fires in homes, kitchens, schools, hospitals, laboratories, offices and factories.

Fire blankets offer a number of advantages over other blankets commonly available:

■ 12 months warranty.

■ 200 gram cloth ensures flexibility and drapability.

■ The suppleness and strength of the blanket. offers user confidence as it is well insulated, yet easily drapes over the fire.

■ Full traceability through individual blanket batch numbering.

■ Flush end caps for easy cleaning.

■ Hinged cap with security seal option to avoids blankets being tampered with.

■ Production is made under a quality management system ISO 9001:2000 ensuring strict quality control procedures are met.

■ All blankets comply with BS EN 1869:1997 and are kitemarked.

Description Part Number1.0m x 1.0m slim pack – red 81/02332

1.2m x 1.2m slim pack – red 81/02338

1.8m x 1.2m slim pack – red 81/02344

A choice of single and double hinged cabinets made from tough new ABS and PE plastics. Traditional GRP cabinets are also still available if preferred.

ABS/Polyurethane Cabinets■ Environmentally friendly – manufactured from

recyclable or recycled materials.

■ Consistent, smooth finish (internal and external).

■ Will not chip or crack.

■ Easily transportable.

■ Innovative design and manufacturing process.

■ Higher impact strength than GRP.

■ Hygienic – suitable for food preparation and clinical environments (unlike GRP).

■ Suitable for wall or post mounting.

■ Toggle clamp closure mechanism.

GRP Cabinets■ Specially designed base to give safe, two-handed removal of extinguisher.

■ Polymide wing closure.

■ Corrosion resistant construction.

■ High-gloss finish.

■ Suitable for wall or post mounting.

BLANKETSFire Blankets

CABINETSHinged Door Cabinets

a b c

Ref Description Part Number

A Single cabinet – ABS 81/00791

Double cabinet – ABS 81/00861

B Single cabinet – GRP 46/54653

Double cabinet – GRP 46/54654

C Single – Clear front 81/02811

C Double – Clear front 81/02812 All the above are not suitable for 5kg C02 Extinguishers A Single cabinet for 5kg CO2 Ext – ABS 81/02239

Cab

inet

s4Se

ctio

n 2

13

A choice of vehicle extinguisher cabinets made from polyethylene.

Polyethylene Cabinet■ Shatterproof and lightweight design.

■ Incorporates 4 x M8 encapsulated T nuts.

■ Manufactured in red glass-reinforced polyester resin (GRP).

■ Suitable for rear-mounted fixed and swinging hose reels (fixings not supplied).

■ Lift-off-front for easy access to hose reel.

■ Designed for use in harsh environmental conditions.

■ H570mm x W600mm x D260mm.

Vehicle Extinguisher Cabinet

Description Part Number* Vehicle extinguisher cabinet for

9kg Extinguisher – H750 x W300 x D270mm 81/00870

* Vehicle extinguisher cabinet for

6kg Extinguisher – H650 xW240 x D240mm 81/00792

* These do not include a fixing kit – please order separately

Fixing kit for vehicle cabinet – 30/60 degree angle mounting 81/02053

Fixing kit for vehicle cabinet – horizontal mounting 81/02327

Hose Reel Rgid Cover

Hose Cradle

Description Part NumberHose Reel Rigid Cover 81/00247

■ Manufactured in red glass-reinforced polyester resin.

■ Can be mounted in cabinets or to walls. (fixings not supplied)

Description Part NumberHose Cradle 46/54225

ANCILLARY ITEMS

Co

vers

& S

tan

ds4

Sect

ion

214 ANCILLARY ITEMS

■ Manufactured from PVC.

■ Clear viewing port.

■ Ideal protection in harsh environments.

■ Designed for rapid removal

A prestige range of fire extinguisher stands.

■ High-gloss finish.

■ Single and double versions.

COVERSExtinguisher Covers

Description Part NumberRed 20" x 11" extinguisher cover 81/00107

Red 24" x 11" extinguisher cover 81/00108

■ Manufactured from strengthened PVC.

■ Ideal protection in harsh environments.

■ Designed for rapid removal.

Hose Reel Cover

Description Part NumberRed hose reel flexible cover 46/57354

STANDSExtinguisher Stands - GRP

Description Part NumberSingle stand – red 81/02405

Single stand – grey 81/02406

Double stand – red 81/02407

Double stand – grey 81/02408

Description Part Number Single stand – red 81/02743

Double stand – red 81/02744

Extinguisher Stands - Moulded Plastic

15

Fire

Po

ints4

Sect

ion

1

ANCILLARY ITEMS

■ Manufactured from plastic ABS.

■ Will not chip or crack.

■ Higher impact strength than GRP.

A choice of mobile fire points, ideal for moving firefighting equipment close to the source of a fire.

■ Chassis fabricated from mild steel square tube.

■ Epoxy polyester powder paint finish in red.

■ Nylon wheels with rubber tread for ease of movement.

■ Ideal for petrol station forecourts.

Extinguisher Fire Points

Description Part NumberSingle fire point 46/57357

Double fire point 46/57358

MOBILE FIRE POINTSDouble / Triple

Description Part NumberTo hold two fire extinguishers and one fire bucket 81/00212

To hold three fire extinguishers and two fire buckets 46/57049

To hold two fire extinguishers, and a fire bucket, complete with bell 46/57815

Manufactured from cast aluminium, Redlam panic bolts are the economical solution to the problem of providing reliable security for internal emergency exits.

Mark I Designed for emergency exit single doors. Breaking the Ceramtube™ results in the bolt sliding back automatically and unlocking the door.

Mark IIDesigned for interconnecting emergency exit doors. Operates on one side of the door by breaking the Ceramtube™ and on the other side of the door by pushing the knob.Both versions are supplied complete with hammer and chain. Padlocks and ‘To open break tube’ signs are available separately. Use of an optional padlock prevents unauthorised removal of Ceramtube™ without breaking the tube itself.

Ceramtube™Replacement cartridges for both Mk I and Mk II Redlam panic bolts. Designed to produce no sharp edges when smashed. Packed in boxes of twenty.

■ Manufactured from durable ABS plastic.

■ Unique ‘snap fit’ design.

■ Mk I key box supplied complete with printed glass.

■ Spare glass for Mk II key box can also be supplied.

Incorporates a robust rectangular section, steel cross arm with downward thrust action, giving added strength, ease of operation and an attractive appearance.

■ Manufactured primarily from Mazak Alloy to BS 1004A.

■ Finished in dark metallic grey.

■ Surface mounted.

■ Supplied with full fixing instructions.

■ Can be converted for right or left. hand operation.

ESCAPE BOLTS, KEYS AND LATCHESRedlam Panic Bolts

Description Part NumberMk I Panic bolt 46/32207

Mk II Panic bolt 46/32951

Keeper plate (spare) 46/33070

Hammer and chain (spare) 39/51921

Ceramtube™ (box of 20) 46/57050

Padlock (anti-tamper) 46/54457

Key Box and Glasses

Panic Latch

Ref Description Part NumberA Mk I key box 46/54280

B Hammer and chain 39/51921

Spare glass for Mk I key box 46/27218

Spare glass for Mk II key 46/57345

Description Part NumberPanic latch 46/57615

Esca

pe

& F

ire

Safe

ty 4

Sect

ion

216 ANCILLARY ITEMS

Dorgard is an acoustically activated fire door release device. Dorgard can hold fire doors open in any position and release them automatically should a fire alarm sound.

■ Manufactured and tested in accordance with BS EN 1155.

■ Accepted by Chief Fire Officers Association (CFOA).

■ Endorsed by the National Care Homes Association.

■ Designed in line with the Disability Discrimination Act.

Steel escape ladders, intended for domestic use only.

■ Suitable for two and three storey buildings.

■ Unique ‘tangle-free’ design.

■ Fully assembled.

■ Quickly attached to window for easy escape.

■ White coating to prevent corrosion.

■ Ideal for outside locations such as caravan sites

■ Bell sounds 60dB alarm up to 35 metres

■ Die-cast aluminium dome, powder coated red

■ Base plate die-cast aluminium

■ Pre-drilled flange for fast and easy mounting (fixings not included)

■ Weight 1.8 kg, overall diameter 280mm, depth 135mm

Single and Double Door Panic Latch/Bolt

Acoustic Fire Door Release Device

Description Part NumberSingle door panic latch/bolt 46/60145

Double door panic latch/bolt 46/61564

Description Part NumberDorgard Auto release - black 81/02781

Other colours available on request, subject to lead times.

Escape Ladders 15 and 25 feet

Description Part NumberEscape ladder – 15 foot 46/6355

Escape ladder – 25 foot 46/6430

Rotary Hand Alarm Bell

Description Part NumberRotary Hand Alarm Bell 42/57030

Esca

pe

& F

ire

Safe

ty 4

Sect

ion

2

17ANCILLARY ITEMS

■ Conforms to BS 5725 part 1.

■ Specified and approved by fire officers and local authorities.

■ Anti-thrust device prevents upward leverage of the bottom shoot, providing increased security.

■ Triple action device fitted to the top shoot keeps the shoots withdrawn when the door is open and auto-matically releases them when the door is closed.

■ Surface mounted – fixing instructions supplied.

■ Manufactured from cast iron with steel tubes, brass follower and extruded aluminium guides.

■ Finished in dark metallic grey.

ANCILLARY PRODUCTS18Sa

fety

Pro

du

cts4

Sect

ion

2

Type Powder Powder 1kg 2kg

Fire rating 8A 34B 13A 70B

Height (mm) 335 385

Cylinder dia (mm) 78 112

Overall width (mm) 118 132

Filled weight (kg) 2.0 3.42

Range of throw (m) >2 >2

Duration of discharge (secs) min 6 min 9

Working pressure (at 20˚C) 14 bar 14 bar

Temperature range (˚C) -20 to +60 -20 to +60

BS EN3 approved ✓ ✓

Part number 81/02652 81/02694

Fire Buckets Metal and Plastic

■ Suitable for garage forecourt protection and clearing up spillages.

■ Metal buckets are epoxy polyester powder painted in red.

■ ‘Fire’ label supplied loose with metal bucket.

■ Lids for both buckets are supplied separately.

■ Wall-mounting bracket suitable for metal and plastic buckets.

Home/Car Guard ExtinguishersStored Pressure Multi-Purpose

■ Ideal for the home, car, boat, caravan or garage.

■ Now comes complete with wire bracket.

■ Safe for most household fire types including electrical fires (not suitable for cooking fat fires).

■ High grade nickel plated brass valve assembly ensures reliability and optimizes efficiency whilst being protected from corrosion.

■ Coated steel levers built to withstand the hardest knocks.

■ 14 bar working pressure for maximum fire fighting performance gives greater application reach ensuring user safety.

■ Long drawn high grade steel body shell for optimum strength.

■ Polyester external coating adds extra protection to withstand extreme temperatures, dirty environments and UV degradation.

■ Precision built mechanical pressure gauge provides a very accurate indication of extinguisher’s pressure status.

■ Approved to the Pressure Equipment Directive.

■ CE marked and kitemarked.

Ref Description Part Number A Metal flat bottom 3745/00

B Metal lid for 3745/00 3747/00

C Plastic 2 gallon 'D' type 3745/01

D Plastic lid for 3745/01 3747/01

E Wall mounting bracket 3749/00

First Aid Kits

A comprehensive range of first aid kits that are fully compliant with the Approved Code of Practice and the Health and Safety Executive.

Description Part Number1 to 10 persons 81/02807

1 to 20 persons 81/02808

1 to 50 persons 81/02809

brigade equipment 19-26extinguishers and hose reels

ancilliary items

brigade equipment


3SECTION 3

Inlet Breechings 20

Inlet and Outlet Cabinets 21Outlet Valves 21Valve Ancillaries 22Standpipes/Bars/Keys 22Underground Hydrants 23Blank Plugs 23Dividing Breeching 23Hoses and Couplings 24 Branchpipes and Nozzles 25Reelfoam Units 25Foam 26

20D

ry R

iser

Mai

ns

Inst

alla

tio

n/I

nle

t B

reec

hin

gs4

Sect

ion

3

Dry Rising Mains Installation

Dry and wet rising mains are intended for use by the fire brigade or other trained personnel. They provide a readily available means of delivering considerable quantities of water to extinguish or to prevent the spread of fire.

Dry risers are vertical mains fitted into staircase enclosures or other suitable positions, with outlet valves on each floor and inlets fitted at ground level to enable the fire brigade to connect to the water supply.

Wet risers are pipes kept permanently charged with water either from a storage tank (via a booster pump) or direct from the town’s main water supply.

Before installing dry or wet rising mains the exact requirements of the local fire brigade must be ascertained.

Air Release Valve

Landing Valve

Landing Valve

Landing Valve

Gate Valve

GroundFloor

External Wall

Steel Cabinet with GlazedDoor

Two-way InletBreaching

25mm Drain Valve

Complies with BS 5041 Part 3

Dry riser inlet breechings are normally fitted in glass-front-ed cabinets on the outside walls of buildings and have either two or four inlet connections.

They are used to feed water into the rising main through 21⁄2" fire hoses. A 100mm (4") rising main uses a two-way inlet breeching and a 150mm (6") main uses a four-way inlet breeching.

Drain Valves to BS 5154Normally fitted to inlet breechings but can be supplied separately.

Two-way Inlet Breechings4" BSTD, 4" BSP parallel female or 100mm NP16 – can be mounted either horizontally or vertically.

Air Release Valve - See page 22

Inlet Breechings

Description Part NumberInlet breeching two way flanged 4” BSTD (4 Holes) 46/54189

Inlet breeching two way flanged 100mm (8 Holes) 46/54903

Inlet breeching two way screwed 4” BSP female 46/54194

Drain valve 46/57363

Blank cap and chain (drain valve) 46/57364

Rubber cap female 46/57365

BRIGADE EQUIPMENT

21

Inlet and Outlet Cabinets Outlet Valves

A range of inlet and outlet cabinets built to comply with BS5041: Part 5.

■ Designed to house inlet breechings and landing valves.

■ Georgian wired glass panel and spring cylinder lock with key.

■ Manufactured from zintec, epoxy polyester powder coated in red.

Cabinet sizesType of cabinet Width (mm) Length (mm) Depth (mm)Two way vertical inlet 395 595 295

Two way horizontal inlet 595 395 295

Outlet 463 612 325

NB: Please measure size of aperture before ordering.

Description Part NumberTwo way inlet vertical dry riser cabinet 43/01035

Two way inlet horizontal dry riser cabinet 43/01036

Dry riser outlet cabinet 43/01034

Spare glass for vertical dry riser inlet cabinet – H435mm x W190mm 43/01037

Spare glass for horizontal dry riser inlet cabinet –

H235mm x W375mm 43/01038

Spare glass for dry riser outlet cabinet – H475mm x W190mm 46/63274

Spare glass for vertical dry riser inlet cabinet – H430mm x W185mm 81/02349

Spare glass for horizontal dry riser inlet cabinet –

H239mm x W344mm 81/02350

Spare glass for dry riser outlet cabinet – H435mm x W282mm 81/02351

BRIGADE EQUIPMENT

Ou

tlet

Eq

uip

men

t4Se

ctio

n 3

Landing ValvesLanding valves used on dry rising mains should normally be of the gate valve type, but globe pattern valves are occasionally used. They act as outlets from the rising main and are fitted in easily accessible positions on each floor above the first floor of a building and sometimes in deep basement areas.

Dry Riser Gate ValvesWith 21⁄2" instantaneous female outlet to BS 336, blank cap and chain, strap and padlock. Dry riser gate valves comply with the requirements of BS 5041:Part 2. Valves can be mounted in boxes complying with BS 5041:Part 4.

■ Inlet flanged 21⁄2" BSP or 3" BS Table D or 65mm BS 4504 Table 16/21.■ Inlet screwed 21⁄2" BSP.

Globe Pattern Landing Valves (LP) These screw-down stop valves are primarily used as hydrant outlets on wet rising mains, but are occasionally used on dry risers under special circumstances and after discussion with the fire brigade.

■ Gunmetal bodies, major working parts in manganese bronze.

■ Comply with the requirements of BS 504:Part 1 and BS 5154.

■ Outlets are 21⁄2" instantaneous female to BS 336 and inlets flanged or screwed as required.

■ Accessories include blank caps and chain, straps and padlocks.

Horizontal/Oblique Ref Description Part Number A Flanged 21

⁄ 2" BSTD horizontal 46/54101

A Flanged 65mm/ 3"BSTD horizontal 46/54897

A 21⁄ 2" BSP female inlet horizontal 46/54923

A 21⁄ 2" BSTD horizontal 46/54088

A 65mm / 3" BSTD horizontal 46/54898

B 21⁄ 2" BSTD oblique 46/54090

B 65mm / 3" BSTD oblique 46/54902

Bib Nose/Right Angle Ref Description Part Number C 21

⁄ 2" BSTD bib nose 46/54516

D 21⁄ 2" BSTD right angle 46/54089

BRIGADE EQUIPMENT22B

rig

ade

Equ

ipm

ent

• G

ener

al4

Sect

ion

3

The anti-tamper leather strap is for use with globe valves and can be fastened using the 3⁄4" brass padlock. Other accessories include a replacement washer and an air release valve for use at the top of a hydrant system.

Air Release ValvesAir valves are fitted at the top of a riser to release air when the riser is charged with water or to admit air when draining off.

■ Screwed 1" BSP male.

Standpipes, keys and bars are used to obtain water from a pressurised mains supply via underground hydrants. The standard outlet for underground valves according to BS 750 is 21⁄2" BSRT male.

Standpipes have as standard a 21⁄2" BSRT female inlet, which is compatible with our underground hydrants. Standpipes are supplied either with single or double head outlets. Outlets are 2" female instantaneous with single twist release (BS 336). The double-head type is supplied with one blank plug as standard. Contractors’ standpipes are supplied with a brass double check valve as standard.

Technical Specification

Standpipe double head, overall length to centre circle of head (A) 839mm

Standpipe single head, overall length to centre circle of head (B) 839mm

Contractors’ standpipe with double check valve, single and double top

– overall length (to centre of horizontal pipework) 970mm

Hydrant key length (Part number 46/54177) 1042mm

Hydrant bar key length (Part number 46/54177) 1042mm

Hydrant bar length (Part number 46/54178) 915mm

Hydrant key length (Part number 46/54178) 762mm

Valve Ancillaries

Ref Description Part Number A Padlock brass

3⁄4" 46/54458

B Leather strap 1⁄2" x 13 3⁄4" 46/54456

B Leather strap 1⁄2" x 22" 46/54944

C Air release valve 1" BSP 46/54175

D Washer 21⁄2" instantaneous 46/54470

Standpipes/Bars/Keys

Ref Description Part Number A Standpipe double head alloy 46/54958

21⁄2" BSRT female 46/54456

B Standpipe single head alloy 46/32575

21⁄2" BSRT female 46/54175

C Contractors stand pipe single 46/54470

C/W double check valve

D Hydrant bar and key alloy 46/54177

D Hydrant bar and key mild steel 46/54178

Standpipe base washer 46/57366

BRIGADE EQUIPMENT 23

Bri

gad

e Eq

uip

men

t •

Gen

eral4

Sect

ion

3

BS 750 Type II HydrantScrew-down type, cast iron body with manganese bronze valve and forged bronze spindle. Supplied with blank cap, chain and frost valve.

Type 2:

Inlet flange 3" BS Table ‘E’ or 80mm NP16

Outlet connection 21⁄2" BS Round Thread Male

Body Test Pressure 24 Bar

Seat and Valve tested to 16 Bar

Weight 23kg

Ref Description Part Number A Underground hydrant type 2 46/57368

B Plastic blank cap 46/57382

Underground Hydrants Blank Plugs

Unvalved inlet end 21⁄2" male instantaneous and two outlet ends each 21⁄2" female instantaneous with single twist release.

Description Part Number Aluminium alloy (unvalved) – 21⁄2"instantaneous 46/57821

Blank plugs are used to seal off water supplies and pre-vent dirt entering the valves or connectors. Blank plugs are 21⁄2" instantaneous male type.

Gunmetal and aluminium blank plugs are pressure resist-ant; plastic and rubber blank caps act as dust cover only.

Ref Description Part Number

A Male alloy – 21⁄2" instantaneous 46/54322

B Male gunmetal – 21⁄2" instantaneous 46/54330

C Male rubber – 21⁄2" instantaneous 46/54324

D Male plastic – 21⁄2" instantaneous 46/54325

Dividing Breeching

BRIGADE EQUIPMENT24H

ose

& C

ou

plin

gs4

Sect

ion

3

A selection of hose and couplings assemblies are listed below.

Description Part Number 18.3m x 45mm type 2 C/W light alloy couplings 46/57391

18.3m x 64mm type 2 C/W light alloy couplings 46/57377




Layflat Hose to BS 6391:1983

Metric Conversion Table Feet Metres Inches Millimetres

60’ 18.3m 1.75" 45mm

75’ 23.0m 2.5" 64mm

Type 1 and Type 2 Layflat HoseGeneral-purpose synthetic delivery hose. Suitable for industrial and rural fire brigades as well as static building protection. For marine use and for general industrial, commercial and civil engineering applications (including water authority applications) where a high-burst performance hose is not necessary.

■ Lightweight and flexible.

■ Heat and cold resistant.

■ Anti-rot and anti-twist.

■ Type 2 version has a dirt-repellent, external elastomeric coating.

HOSE AND COUPLINGS

Technical Specification – Type 1 and Type 2

Size Weight(gr/m)

Working pressure(bar)

Burst pressure(bar)

13⁄4" (45mm) 200/230 12 49

2" (51mm) 230 10 39

21⁄2" (64mm) 280 10 39

A range of instantaneous couplings, used for connecting the water hose to the water supply quickly. The instan-taneous system is designated by BS 336 and is standard with British fire services for delivery applications.

The predominant size is 64mm, the only size recognised by BS 336. The couplings incorporate a double pull release and double ribbed (DR) hose tail. The hose is pushed over the tails and secured by wire or clips.

Technical SpecificationMechanism Double pull release

Hose connection Ribbed tails

Male – overall length 114mm

Female – overall length 120mm

Ref Description Part Number A 21⁄2” x 21⁄2” (64mm x 64mm) tail light alloy 46/32200

B 21⁄2” x 21⁄2” (64mm x 64mm) tail gunmetal 46/32190

C 21⁄2” x 21⁄2” (64mm x 64mm) tail plastic 46/34215

Washer 21⁄2” instantaneous 46/54470

Instantaneous Couplings to BS 336

BRIGADE EQUIPMENT 25

Bra

nch

pip

es, N

ozz

les

& R

eelf

oam

Un

its4

Sect

ion

3

Branchpipes provide an adjustable nozzle for altering the curtain of water from a narrow spray to a wide spray. Nozzles provide a fixed jet of water.

The basic branchpipe according to BS 336 has an 21⁄2" inlet male instantaneous and outlet threaded 11⁄3" BSP male for either a plain jet or a branchpipe adjustable nozzle.

The branchpipe is controlled from ‘shut off’ through ‘jet’ and ‘spray’ to wide-angle ‘curtain’ by rotating the annular sleeve.

DimensionsNozzle – length 120mm

Branchpipe – overall length 178mm

Instantaneous adaptor – overall length 112mm

■ Designed to connect to a manual water fire hose reel.

■ Controllable discharge.

■ Operates with 12 litres of alcohol resistant foam concentrate (not supplied – see page 70).

■ Provides a firefighting capacity greater than the traditional 135 litre foam engine.

Branchpipes and Nozzles

Ref Description Part Number Price

A 21⁄2" Instantaneous integral gunmetal 46/54146

B 21⁄2" Instantaneous integral diffuser alloy 46/54393

C 21⁄2" Instantaneous male x 1⁄2" Jet Blue ABS 46/54396

Reelfoam Units

Description Part NumberLow expansion unit with 19mm alloy couplings 46/57431

Chrome nozzle – alloy fittings 46/33141

BRIGADE EQUIPMENT26Fo

am4

Sect

ion

3

3% and 6% AFFFA synthetic aqueous film forming foam concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Storex Reddaway AFFF is a unique combination of hydrocarbon and fluorochemical surface active agents.

AR – AFFF (3% – 6%) - Not suitable for extinguishersA synthetic alcohol resistant aqueous film forming foam concentrate for extinguishing and securing flammable hydrocarbon and polar solvent liquid fires. A polymer additive protects the foam blanket from the destructive action of polar solvents. It is used in high-risk situations where hydrocarbons and polar solvents are stored, processed, or transported. It is ideal for industrial and municipal fire departments. Typical applications include bulk storage tanks, process areas, loading racks, marine terminals, military bases and airports.

3% FP - Not suitable for extinguishersA fluoroprotein firefighting foam concentrate for extinguishing and securing flammable hydrocarbon liquid fires. A protein base material provides a tough cohesive foam blanket with high resistance to heat that quickly smothers, cools and seals the fire risk. Fluorochemical surface active agents combined with the protein base increase the fluidity and fuel repellency of the foam.

Ref Description Part Number A AFFF Reddaway 6% – 25ltr drum 46/63237

B AFFF Reddaway 3% – 25ltr drum 46/63238

AR AFFF Reddaway 3% – 6% – 25ltr drum 46/63239

FP Storex Reddaway 3% – 25ltr drum 46/63241

Profoam 806 – Protein Foam – Not suitable for extinguishersA premixable, low-expansion foam. Suitable for all types of nozzles, inductors, foam chambers and discharge units.

Centrifoam 906 – Film Forming Protein – Not suitable for extinguishersA low-expansion foam that forms a vapour seal over hydrocarbon fuel.

Filmfoam 916 – AFFFA low-expansion foam suitable for hydrocarbon fuel.

Filmfoam A836 – AFFFAn alcohol resistant foam, suitable for polar solvent and hydrocarbon fuels.

Ref Description Part Number A Profoam 806 Protein Foam 6% – 25ltr drum 46/24224

Centrifoam 906 FFFP 6% – 25ltr drum 46/57661

B Filmfoam 916 AFFF 6% – 25ltr drum 46/57664

Filmfoam A836 AFFF alcohol resistant – 25ltr drum 46/57668

Reddaway Foam Foam

detection & alarms 27-38extinguishers and hose reels

ancilliary items

brigade equipment


4SECTION 4 Conventional Detection Devices 28Addressable Analogue Detection Devices 30-31Manual Call Points & Sounders 31Bells Sounders & Strobes 32Door Holders 33Sealed Lead Acid Batteries 34Smoke/Heat Alarms 35BS5839 Part 6 Grade C System/ CO Alarms 36Emergency Lighting 37Conventional Call System/Test Equipment 38

DETECTION & ALARMS28Fi

re C

on

tro

l & D

etec

tio

n E

qu

ipm

ent4

Sect

ion

4

The series 65 range of conventional detection devices offer a complete answer to all your requirements. They are compatible with any conventional control panel.

Conventional Detection Devices

Apollo Range

Complying to EN54 Pts 5/7/8 and LPC certificated.


Ion Opt Heat Comb

Voltage 24 DC 24V DC 24V DC 24V DC

Quiescent current 45μA 45μA 53μA

Alarm current 52mA 52mA 52mA 52mA

Optical Smoke Detector Series 65Description Code NumberOptical Smoke Detector Series 65 82/00400 (b)

Ionisation Smoke Detector Series 65Description Code NumberIonisation Smoke Detector Series 65 82/00399 (a)

Heat DetectorsDescription Code NumberHeat Detector CR (84-100C) Series 65 82/00401

Heat Detector A1R (54-65C) Series 65 82/00402 (c)

A range of bases to complement series 65 devices and to offer many alternative options.


Apollo

Relay base max switching contact 50 volts

Apollo Accessories

Mounting BasesDescription Code NumberMounting base standard series 60/65 82/00046 (d)

Mounting base with line diode series 60/65 82/00050

DETECTION & ALARMS

Fire

Co

ntr

ol &

Det

ecti

on

Eq

uip

men

t4Se

ctio

n 4

Photoelectric Smoke DetectorDescription Code NumberPhotoelectric Smoke Detector CDX Range 82/00040 (b)

Technical Specification - For all devices

Operating voltage 15 - 30V DC

Quiescent current 35μA

Alarm current 40mA

For all devices

The Hochiki beam detector is tested to BS5839 Pt5 and is LPCB approved. Direct wall mounting ensures virtually no vibration when in use.

Ionisation Beam DetectorDescription Code NumberIonisation Smoke Detector CDX Range 82/00037 (a)

Hochiki Range Hochiki Accessories

Mounting Bases (Conventional)

A range of bases to complement the CDX range of devices offering many alternative options.

Description Code NumberElectronic free mounting base CDX Range 82/00047 (b)

Schottky line continuity base (Safeline) with remote indicator 82/00049

Remote indicator output CDX Range 82/00051

The CDX range is a well established range of conventional devices with an outstanding performance record. Hochiki's flat response technology enables the photoelectronic device to be equally sensitive to a much wider range of combustible materials.

Heat DetectorsDescription Code NumberFixed Temperature (90C) CDX Range 82/00045

Rate of rise Grade 1 (60C) CDX Range 82/00042 (c)

Combined Heat Grade 2 (60C) CDX Range 82/00043

Photoelectric Beam DetectorDescription Code NumberTwo Wire Beam Detector CDX Range 82/00290

Conventional Detection Devices

29

DETECTION & ALARMS30Fi

re C

on

tro

l & D

etec

tio

n E

qu

ipm

ent4

Sect

ion

4

Addressable Analogue Detection Devices

Apollo XP95 Analogue DevicesAll devices are moulded in self extinguishing white polycarbonate material and are set to EN54 thresholds.

Description Code NumberXP95 Ionisation smoke device 82/00095 (a)

XP95 Optical smoke device 82/00097 (b)

XP95 Multi sensor device 82/00103 (c)

XP95 Temperature (STD) device 82/00100 (d)

XP95 High temp device 82/00101

XP95 Loop powered beam detector 82/00289

XP95 Beam detector reflector 82/00291


Ion Opt Heat Multi

Supply voltage V DC 17 - 28 17 - 28 17 - 28 14 - 28

Modulation voltage V DC 5 - 9 5 - 9 5 - 9 5 - 9

Quiescent current 280μA 340μA 250μA 500μA

Alarm current 2mA 4mA 2mA 3.5mA

Apollo Range

Apollo Accessories

Apollo Bases & Accessories XP95 RangeDescription Code NumberCommon base device and expert card 82/00104

Isolating base (20 devices) 82/00108

Isolator base 82/00110

Low power relay base 82/00091

Blank expert card 82/00112

Apollo Test Set 82/00133

KAC Manual Call Points

Manual Call Points (Conventional)

KAC Manual callpoints - the major producer of call points offering surface and flush options with accessories - all to EN54 Pt2 and LPC certificated

Description Code NumberEN54 MCP for indoor use 82/00404

Transparent hinged cover 82/00406

Replacement glass 82/00405

Spare test key 82/00407

Pattress box 82/00062

Hochiki Accessories

Description Code NumberTransparent hinged cover 82/00056

Replacement glass 82/00058

Spare test key 82/00060

Pattress box 82/00062

Class 2000 spares

DETECTION & ALARMS

Fire

Co

ntr

ol &

Det

ecti

on

Eq

uip

men

t4Se

ctio

n 4

Addressable Analogue Manual Call Points and Sounders

Apollo

Apollo SoundersDescription Code Number90dB sounder low profile loop powered sounder 82/00131

100dB loop sounder 82/00129

Technical Specification - Apollo

Low profile sounder Sound output 85dB (A) @ 1 metre

Current consumption 3mA

100dB sounder Operating voltage 14 - 28V DC polarity sensitive

Quiescent current 1.1mA

Alarm current 4.5mA

IP42


Ion Opt Heat Multi

Supply voltage V DC 24 24 24 24

Standby current

Low 140μA 120μA 90μA 120μA

Normal 350μA 310μA 350μA 450μA

Devices per loop 127 127 127 127

Description Code NumberASX Optical smoke device 82/00098 (a)

ASX Ionisation smoke device 82/00096 (b)

ASX Heat device R/R 82/00099 (c)

ASX Multi sensor device 82/000102 (d)

Hochiki Range

Hochiki Accessories

Hochiki Bases & Accessories ASX RangeDescription Code NumberCommon base 82/00105

Addressable base 82/00106

Master addressable base 82/00107

Isolator module 82/00114

Mini zone monitoring module 82/00115

Zone monitor 82/00116

Relay output module 82/00118

Dual switch monitor 82/00119

Hand held programmer 82/00124

Hochiki ASX Analogue DevicesThis range is designed to meet European approvals EN54 Pt5, Pt 7 and Pt 9 set to EN54 thresholds.

Apollo XP95

Manual Call Points (Addressable)The XP95 range of manual call points uses the KAC world series call point It is available in three types. Approved to BS5839 Pt 2.

Description Code NumberWeather Proof Manual Call Point Series XP95 82/00127 (a)

Surface Manual Call point for Series XP95 82/00125

Flush Manual Call point for Series XP95 82/00128

Technical Specification - Apollo

Operating voltage 17 - 28V DC Communication protocol 5 - 9V Quiescent current 350μA Alarm current 2mA

31

DETECTION & ALARMS

Bells, Sounders, Strobes for any System

Fulleon

Fulleon BellsDescription Code Number6” Motorised bell 24 volt 82/00064 (a)

Roshni Low ProfileDescription Code NumberRoshni low profile, shallow base, 24 volt 82/00070 (b)

Standard Squashni SounderDescription Code NumberStandard Squashni sounder. Tone 3. White 82/00069

Standard Squashni sounder cover. White 82/00068 (c)


Bells 6” 8” Supply voltage 18 - 30V DC 18 - 30V DC Alarm current 25mA 28mA Output 93/95dB (A) 95/97dB (A) @ 1 metre @ 1 metre

Roshni Squashni Supply voltage 9 - 28V DC Supply voltage 10 - 28V DC Alarm current 16mA Alarm current 18mA Output @ 1 mtr 102dB (A) Output @ 1 mtr 93dB (A)

Singe Voice Fire Cryer Enhanced SounderDescription Code NumberSinge message non-sync. Voice enhanced sounder 82/00074 (d)

Alternative messages available

Banshee SounderDescription Code NumberBanshee LP.LF.Red 82/00071

Kobishi StrobeDescription Code NumberStrobe light with interchangeable red lens 82/00075 (e)


Fire Cryer Kobishi Strobe

Alarm current 20mA Supply voltage 24V DC

Supply voltage 24V DC Alarm current 35mA

Flash rate 60 - 100

Fire

Co

ntr

ol A

cces

sori

es4

Sect

ion

432

DETECTION & ALARMS 33

Door Holders for any System

Fulleon Vimpex

Fulleon door holders designed to hold open fire or smoke stop doors.

In the event of an emergency they will release the door. A manual release button is standard for both models.

Door Holders & AccessoriesDescription Code NumberWall mounted magnet door release 230 volt 82/00082 (a)

Wall mounted magnet door release 24 volt 82/00080

Floor mounted bracket for above 82/00085

Technical Specification - Fulleon Power supply 24V DC or 230V AC

Holding current 50mA or 2VA

Kilogram force 40kg

Vimpex door holders are IP54 rated and comply with BS 5839 Pt3 and EN 1155. A special feature is a spring loaded device to eliminate residual magnetism. A manual release button is standard for both models.

Door Holders & AccessoriesDescription Code NumberSurface door retainer with back box 24 volt 82/00081 (c)

Surface door retainer with back box 230 volt 82/00083

Floor mounted bracket for above 82/00084

Technical Specification - Vimpex

Power supply 24V DC or 230V AC

Holding current 25mA or 1.5VA

Kilogram force 20kg

Fire

Co

ntr

ol A

cces

sori

es4

Sect

ion

4

DETECTION & ALARMS34

Sealed Lead Acid Batteries

A guide to SLA Battery back up capacity

The capacity of SLA batteries fitted to the Control and Indicating Equipment is determined by the type of system installed (L or P) and is specified in BS 5839 Part 1 1988, section 16.5 Duration of the standby supply the following is a simple guide to calculate the capacity.

1. Establish the total standby current drawn by all devices connected to and including the Control and Indicating Equipment. Add all the current readings together. Don’t forget to pay attention to the decimal places. i.e. mA 10-3, μA 10-6, etc.

2. Establish the total alarm current drawn by all devises connected to and including the Control and Indicating Equipment. Add all the current readings together. Don’t forget to pay attention to the decimal places. i.e. mA 10-3, μA 10-6, etc.

3. Multiply the standby current by the number of hours standby required.

4. As all the L and P systems require an alarm period of 30 minutes (except in very special cases, see standard) total alarm current should be multiplied by 0.5 (half of one hour)

5. Add the results of 3 and 4 together

6. BS 5839 Part 1 specifies that the batteries are able to provide its designed standby duration after 24 hours charge from it’s discharge state. To allow for this the capacity of the battery should be increased by 20% to overcome problems with charge rates.

Example

The system has to meet the requirements for an L type environment, (life safety) and is supervised at intervals of not more than 12 hours.

Total standby current multiplied by 24 hours = 35.781mA x 24 = 0.858744 Ah.

Total alarm current multiplied by 30 min. = 1.280A x 0.5 = 0.64 Ah.

Add the standby Ah and the Alarm Ah = 0.858744 + 0.64 = 1.498744 Ah

Add 20% margin for charging. = 1.8 Ah.

It is common practice to choose the nearest available size moving up a size if

necessary. So in this case the next available size will be 2.2 Ah.

Product Standby Total Standby Alarm Total Alarm Panel x 1 35mA 35mA 100mA 100mA Ionisation x 10 45μA 450μA 52mA 520mA Optical x 5 45μA 225μA 52mA 260mA Heat x 2 53μA 106μA 52mA 104mA MCP x 4 0 0 50mA 200mA Sounders x 6 0 0 16mA 96mA TOTAL 35.143mA 35.781mA 332mA 1.280 A

The NP range is highly respected and offers the following features.

■ Deep discharge recovery

■ Security from electrolyte leakage

■ Oxygen recombining

■ Float or cyclic use

■ Usable in any orientation

■ Lead calcium grids giving long life

Description Code Number1.2AH 12 volt SLA Battery 82/00192

2.1AH 12 volt SLA Battery 82/00193





Fire

Co

ntr

ol A

cces

sori

es4

Sect

ion

4

DETECTION & ALARMS 35

Smoke/Heat Alarms

BRK

BS5446 Pt1 1990 Smoke AlarmsDescription Code NumberIONISATION

230 volt - 10 year lithium secondary supply with

silence and interconnect 82/00138 (a)

OPTICAL

230 volt - 10 year lithium secondary supply with

silence and interconnect 82/00398 (b)

HEAT

230 volt - 10 year lithium secondary supply and

interconnect 82/00140 (c)

Smoke & Heat Alarm AccessoriesDescription Code NumberCommon base (Smoke Alarm) 82/00218 (d)

Common base (Heat Alarm) 82/00206

Kidde

All products are kite marked to BS5446 Pt 1 and C.E. approved except heat alarms which are tested EN54 Pt 5 sensitivity and BS5446 Pt 1 environmental

9 Volt DC UnitsDescription Code NumberIONISATION

Basic Product 82/00203 (a)

BRK

9 Volt DC Units Description Code NumberIONISATION ALARM

Ionisation smoke alarm 82/00205 (b)

OPTICAL alarm

Optical smoke alarm interconnectable with

alkaline battery 82/00212 (c)

230 Volt/9v DC AC/DC Unit Description Code NumberIONISATION

AC/DC + Alkaline + Interconnect 82/00210 (d)

OPTICAL

AC/DC + Alkaline + Interconnect 82/00214 (e)

AccessoriesDescription Code NumberCommon Base (Smoke Alarm) 82/00218

Fire

& G

as A

larm

s4Se

ctio

n 4

DETECTION & ALARMS36

BRK

CO Alarms

Flexi-Point - BS5839 Pt6 Grade C

■ 230V AC Supply

■ 20 devices can be wired in

■ Built in call point (BS5839 Pt2)

■ Built in sounder

■ 10 year lithium secondary supply 9V DC

■ Enabling key switch

Slave Panel

As above less

■ Enabling key switch

Description Code NumberCallpoint. Master 82/00136 (a)

Auxiliary. Master 82/00137 (b)

Kidde Sensors

Certified by BSI to conform to EN 50291, with a 5 year manufacturer’s warranty. These alarms are Loud 85 decibel alarm with a flashing red light to warn when dangerous levels of CO are detected. They use proprietary electrochemical sensor technology with a self-diagnosing feature will indicate unit or sensor malfunction. Easy to install, with an automatic end-of-life warning after seven years, uses 3 x AA battery (supplied).

Additional features of the 900-0146 Digital Display alarm only

This alarm also has digital display continuously shows concentration of CO detected above 30ppm (parts per million), with peak level function to display the highest CO reading taken above 11ppm since the last peak level reset or power-up. The alarm is backlit display to take readings in the dark.

CO AlarmsDescription Code Number9CO-5 4.5v DC Carbon Monoxide Alarm - Basic 82/00223

900-0146 4.5v DC Carbon Monoxide Alarm - Digital Display 82/00421

Fire Alarms

Fire

& G

as A

larm

s4Se

ctio

n 4

DETECTION & ALARMS

e

f

Emergency Lighting

Thomas Glover Thomas Glover

A range of emergency luminaires in compliance to BSEN 60598-1, BSEN 4533-10Z, BSEN 60924 and suitable to be used in a BS5266 system.Models available areBricklite models IP65 giving 54 lumens output - available in NM and M modes all at 3 hours operation and featuring “The Friendly Clip Cover”Low profile standard IP20 giving 60 lumens output available in NM,M and S. All at 3 hours operation.

NM - Non maintained - lamp illuminated under mains failureM - Maintained - lamp switched under mains failure.S - Sustained - second lamp illuminated under mains failure.Features include• Friendly clip cover• Ni-Cad battery locater• Besa box mountings• Double insulated• Impregnated transformers and invertors

Exit Boxes8 watt wall mounted steel enclosures - 3 hours operation.

Twin Spot Light Units2 x 20 watt spots non maintained - metal enclosure - for commercial/ industrial use.

Adhesive EurogramKits for bricklites and for low profiles

Description Code NumberMetal exit box 8 watt maintained 82/00272 (a)

2 by 20 watt twin spot (excludes batteries) 82/00271 (b)

IP65 bricklite 3 Hr. 8 watt maintained 82/00002

IP65 bricklite 3 Hr. 8 watt non-maintained 82/00001 (c)

IP20 3Hr. 8 watt maintained 82/00006

IP20 3Hr. 8 watt non-maintained 82/00005 (d)

Adhesive eurogram kit (bricklite) 82/00003

Adhesive eurogram kit for IP20 model 82/00004

Batteries (Ni-CadReplacement Hi-Temp Ni-cad Battery, packs in C-Cell and D-Cell sizes

Description Code NumberC Size Ni-Cad 3.6V 1.5 AH 82/00134 (e)

D Size Ni-Cad 2.4V 4AH 82/00135 (f)

Emer

gen

cy L

igh

tin

g4

Sect

ion

4

37

DETECTION & ALARMS38C

on

ven

tio

nal

Cal

l Sys

tem

& T

est

Equ

ipm

ent 4

Sect

ion

4

Conventional Call Systems Test Equipment

No Climb

Disabled Persons Toilet Alarm

■ Comes as complete kits

■ Standard or economy kits

■ Many options on extras

Description Code NumberStandard Kit 82/00231

Economy kit 82/00232

Canisters of “Ozone” friendly smoke suitable for testing ionisation or optical smoke detectors. The 150 ML hand held aerosol will provide up to 200 tests. The 250 ml aerosol is to be used with dispenser kit.

Universal detector removal tool suitable for use with a wide range of detectors from 65m to 110mm diameter.

Aerosol dispenser/tester for use with 250ml aerosol - lightweight -

suitable for floor and ceiling voids. Transparent cup enables view of detector L.E.D.

Extension pole to extend area of activity.

Description Code NumberAerosol smoke dispensor/tester 82/00199 (a)

Aerosol Spray 150ml 82/00202 (b)

Aerosol Spray 200ml (use with dispensers) 82/00200

Description Code NumberUniversal detector remover 82/00198 (c)

1.2 to 4.5 meter telescopic extension pole 82/00201

Intelligent Battery TesterThe professional tester which shows on the L.C.D. by scrolling through.• Capacity• Voltage• Temperance

Description Code NumberIntelligent Battery Tester Gold IBT 82/00396 (d)

ACT

39

Information UpdateFire fighting foams containing Perfluorooctane Sulphonate (PFOS) The Department for Environment, Food and Rural Affairs (DEFRA) issued a consultation paper in October 2004 on UK proposals to introduce regulations on the restriction of use and marketing of perfluorooctane sulphonate.

PFOS, recently proved to be bioaccumulative, persistent, toxic and a risk to the aquatic and terrestrial environment, have been used in fire fighting foams for many years.

Formulators, producers and users of PFOS in fire fighting foams will be affected by these proposals. It is thought that as substitutes exist for fire fighting foams a time limited derogation will be put in place before a total phase out of PFOS. If these proposals go ahead, fire fighting foams containing PFOS will have to be incinerated at high temperature.

How do I know if the extinguishers I buy contain PFOs?

The FIREPOWER range have been PFOS free since 2001.

Disability Discrimination Act 1995: Part III Since the 1st of October 2004 service providers have had a legal requirement to make ‘reasonable adjustments’ to their premises to ensure disabled people can use their services.

Who is affected by the DDA?

Everyone that provides paid or free goods, facilities or services to the public is defined as a service provider. Eg. Hotels, Restaurants, Retail shops, Schools, Hospitals, Theatres, Airports etc...

What types of adjustments need to be made to the premises?

These adjustments relate to the building’s ‘physical features’ i.e. entrances/exits, floor layouts, toilet facilities, printed materials, fire & safety provisions etc...

What is considered ‘reasonable’?

The Act does not list what particular adjustments should be made to a building. The adjustments made will depend upon the size and resource of the service provider and how practical it is to make these changes.

Disability can take many forms such as sight or hearing impairment, physical and mobility problems, mental health problems or learning difficulties. These disabilities need to be taken into account when developing a fire safety strategy.

Thomas Glover offers a range of products that can help customers tailor their fire safety strategy to reflect the requirements of the DDA:

• Supplementing Fire Alarm bells with visual flashing beacons to alert the hard of hearing

• Braille and tactile signs specifically designed for blind and partially sighted people

• Evacuation chairs and Dorgard to ease mobility through the building

For more information please log on to www.drc-gb.org

Fire (Scotland) Act

The Scottish Executive is proposing new primary legislation to consolidate existing fire regulatory requirements and to reform the operation of the fire and rescue service.

For more information please log on to www.scotland.gov.uk

Fire Safety Order (FSO) The Fire Safety Order will encompass and replace all existing fire legislations:

• Fire Precautions Act 1971

• Fire Precautions (Workplace) Regulations 1997/1999

• Management of Health and Safety in the Workplace Regulations 1999 • + 100 pieces of related legislation and only apply in England and Wales.

Who will be affected by the FSO?

• Non domestic premises

• All employers

• Self employed

• Anyone responsible for a building to which the public have access

• Voluntary organisations

All premises affected by the FSO will have to carry out a fire risk assessment.

Aim of the FSO:

• Reduce the risk of fire and the spread of fire

• Extend protection explicitly to all occupants, not just employees

• Protect the fire fighters

• Protection of property

For more information please log on to www.odpm.gov.uk

Which Extinguisher to use

Water

Water withAdditive

Spray Foam

ABC DryPowder

Dry PowderSpecial Metal

Dry PowderSpecial Monnex

C02 Gas

Hose Reels

Wet Chemical

WhichExtinguisherto use Freely burning

materials.Flammable

liquidsFlammable

gasesFlammable

metalsElectricalHazards

Cooking oilsand fat

A B C D F

39

ﬁre safety catalogue - ZENER FIRE product catalogue.pdfextinguisher range – you’ve ... BS EN3...

Documents

Transcript of ﬁre safety catalogue - ZENER FIRE product catalogue.pdfextinguisher range – you’ve ... BS EN3...