Re-Board Accessories Catalogue 2010
-
Upload
goncalo-mota -
Category
Documents
-
view
248 -
download
10
Transcript of Re-Board Accessories Catalogue 2010
©2010 Design Force AB, All Rights Reserved
Re-board
Accessories
2010
®
Plastic Screws
10055
10030
12055
Description Plastic screws specially developed for 16 mm Re-board®, but works
with most thicknesses. A special version comes with a loop for hanging
(only available in transparent colour).
Material Transparent: PC (polycarbonate)
All other colours: Glass fibre reinforced PA (polyamide)
Length 30 mm or 55 mm. With loop 55 mm + 17 mm.
Thickness Thread diameter 13mm
Colours Transparent, black, or white. With loop (12055) only transparent.
Note that the transparent screws may make some noise duringapplication as PC has not got the lubricating properties of PA.
Part no. 10030 (30 mm), 10055 (55 mm), and 12055 (with loop)
Packaging 500 pieces/box
Weight 30 mm: 0.5 kg/box, 55 mm: 1.2 kg/box, loop screw: 1.5 kg/box
©2010 Design Force AB, All Rights Reserved
Screwdriver
Description Plastic screwdriver to be delivered with screws for easy customer
assembly. Specially developed for our plastic screws, as metal
screwdrivers can damage the screw heads.
Material Glass fibre reinforced PA (polyamide)
Length 96 mm
Colours Not specified, can vary
Part no. 10997
Packaging 25 pieces/box
Weight 0.4 kg/box
10997
©2010 Design Force AB, All Rights Reserved
Corner Locks
Description Plastic corner locks specially developed for Re-board®. Works with all
thicknesses. Both types are fixed with a partial cut 15 mm wide and
59 mm from the edge.
Material Grey: Glass fibre reinforced PA (polyamide)
Transparent: PC (polycarbonate)
Size 60 mm.
Colours 20090 Transparent and 21090 Grey.
Part no. 20090
21090 (designed to be used with aluminum profile 53016)
Packaging 250 pieces/box
Weight 1.4 kg/box
21090 20090
©2010 Design Force AB, All Rights Reserved
Plastic Edging, ver. 1
Description Plastic profile used to cover edges of Re-board®. For efficient
application, use edging band applicator (#99030) to apply
approximately 10 m/min.
Material Soft PVC
Size For Re-board 16 mm.
Colours Colour NCS deviation delta*E
Black S 8000-N 1.98
White S-0603-Y80R 2
Grey S-3005-R80B 2.5
Red S-3060-Y90R 3.56
Oak wood - -
Light wood - -
Available in custom colours upon request.
Part no. 30016
Packaging 2x50 m rolls/box.
Weight 6.6 kg/box
30016
©2010 Design Force AB, All Rights Reserved
Plastic Edging, ver. 2
Description Thinner and more discrete plastic profile used to cover edges of
Re-board®. For efficient application, use edging band applicator
(#99030) to apply approximately10 m/min.
Material PVC (Softened THS/B-17)
Size For Re-board 10 and 16 mm.
Colours 10 mm: Black, white
16 mm: Black, white, red, greyNew!
Custom colours available on request (but not wood).
Part no. 32010 (for 10 mm) and 32016 (for 16 mm)
Packaging 2 x 50 m rolls/box
Weight 10 mm: 2.2 kg/box
16 mm: 3.6 kg/box
32010
32016
New!
©2010 Design Force AB, All Rights Reserved
60°Corner Profile, plastic
Description Plastic corner profiles used to mount two pieces of 16 mm Re-board®at a 60º angle in order to make a triangular standee. The profile is
however somewhat flexible, so other angles can be achieved.
Material ABS
Length 3.2 m
Colours Grey/silver
Part no. 35060
Packaging 20 profiles (=64 m)/box
Weight 21 kg/box
35060
©2010 Design Force AB, All Rights Reserved
90°Corner Profile, plastic
Description Plastic corner profiles used to mount two pieces of 16 mm Re-board®at a 90º angle.
Material PVC (For aluminum 90º, please see #53016)
Length 3.2 m
Colours White. Includes a round cover.
Part no. 35090 (Fix with long screws #10055)
Packaging 20 profiles (=64 m)/box
Weight 12 kg/box
35090
©2010 Design Force AB, All Rights Reserved
Hinge Profile, plastic
36000
Description Plastic hinge profile used to connect two pieces of 16 mm Re-board®for flexible folding. Can fold any angle from 0º to 180º, which enables
space effective transportation of ready mounted signs.
Material ABS + TPE
Length 3.2 m
Colours White
Part no. 36000 (Fix with long screws #10055)
Packaging 20 profiles (=64 m)/box
Weight 6.5 kg/box
©2010 Design Force AB, All Rights Reserved
H Profile, plastic
37016
Description Plastic H profile for 16 mm Re-board®.
Used to form a nice joint between two sheets Re-board for a wall,
or as a way to mount a top sign onto a display or shelf.
Material PVC
Width 31 mm / 38 mm
Length 2.75 m
Colours White
Part no. 37016
Packaging 20 profiles (=55 m)/box
Weight 9 kg/box
©2010 Design Force AB, All Rights Reserved
Edge Connecting Profile, plastic
Description Plastic connecting profiles for 30 mm Re-board®. Perfect for
connecting exhibition walls etc.
Will be available from October 2010.
Material PVC
Width 30 mm
Length 3.2 m
Colours White
Part no. 38030
Packaging 20 connecting profiles (=64 m) + 1 locking profile (3.2 m, to be cut to
smaller pieces) per box
Weight 10 kg/box
38030 – Connecting Profile
38030 – Locking Profile
New!
©2010 Design Force AB, All Rights Reserved
Plastic Hooks
40200
Description Plastic hooks for products. Easily mounted in 16 mm Re-board®.
Material Glass fibre reinforced PA (polyamide)
Length 140 or 200 mm
Colours White and Grey
Heavy Duty for heavier loads only in Grey
Part no. 40140 (140 mm)
40200 (200 mm)
41200 (200 mm, Heavy Duty)
Packaging 300 pieces/box (140 mm)
200 pieces/box (200 mm)
Weight 140 mm: 3.8 kg/box
200 mm: 3.5 kg/box
40140
©2010 Design Force AB, All Rights Reserved
Sliding Profile, alu
51016
52016
Description Aluminum profile for wall mounting. Cover parts or a complete wall
with printed or laminated 16 mm Re-board® sheets, pictures, white
board for taking notes, and more. Once the profiles are in place,
switching Re-board® sheets can be done in seconds.
Material Anodised aluminum
Length 3.3 m, but 5 cm of each end must be cut away due to marks from the
anodisation process (=3.2 m).
Colours Natural aluminum (grey). Painted profiles can be arranged upon
request.
Part no. 51016 (upper)
52016 (lower)
Packaging 20 profiles (=64 m)/box
Weight Upper: 24 kg/box
Lower: 19 kg/box
©2010 Design Force AB, All Rights Reserved
Corner Profile, alu
53016
Description Aluminum profile for making 90º corners with 16 mm Re-board®sheets. To lock, use plastic corner lock #21090.
Material Anodized aluminum (For plastic 90º, please see #35090)
Length 3.3 m, but 5 cm of each end must be cut away due to marks from the
anodisation process (=3.2 m).
Colours Natural aluminum (grey). Painted profiles can be arranged upon
request.
Part no. 53016
Packaging 20 profiles (=64 m)/box
Weight 35 kg/box
©2010 Design Force AB, All Rights Reserved
Protective U-profiles, alu
Description Aluminum profile for covering the edge of 16 mm Re-board®. These
profiles are well suited for joining Re-board® sheets to create e.g. walls
or signs made of several sheets.
Material Anodized aluminum
Length 3.3 m, but 5 cm of each end must be cut away due to marks from the
anodisation process (=3.2 m). We can also cut to custom lengths.
Colours Natural aluminum (grey)
Custom colours available upon request.
Part no. 54016 (for 16 mm Re-board)
Packaging 20 profiles (=64 m)/box
Weight 16 mm: 12 kg/box
©2010 Design Force AB, All Rights Reserved
Join for Partial Cut
Description Iron part to stabilize a partial cut. Made to fit 16 mm Re-board® with
version 1 edging band (#30016)
Material Iron
Length 177 mm
Colours Grey and white
Part no. 61016 (for 16 mm Re-board)
Packaging 100 pieces/box
Weight 2.8 kg/box
61016
©2010 Design Force AB, All Rights Reserved
Re-board® Sample Kit
Description A sample kit with a variety of samples, including for example a
small Re-board chair, a sign and some Re-board® sample
pieces. Note that the content may vary from the picture above.
Part no. 99001
Dimension 510 x 312 x 100 mm
Weight 1.5 kg/box
99001
©2010 Design Force AB, All Rights Reserved
Sample Kit, Accessories
99009
Description Our box with samples of most accessories. Note that
the content may vary from the picture above.
Part no. 99009
Sizes 240 x 218 x 57
Weight 0.6 kg/box
©2010 Design Force AB, All Rights Reserved
www.re-board.net
Design Force AB
Box 242
SE-601 04 Norrköping
Visit/delivery: Västra Bravikenvägen 1
Tel: +46 (0)11 15 52 50
Fax: +46 (0)11 15 52 69
www.designforce.se