RC8221 Iris Camera Set-Up Guide - Lowe's Camera Instruction...RC8221 Iris ™ Camera Set-Up Guide....

20
RC8221 Iris Camera Set-Up Guide

Transcript of RC8221 Iris Camera Set-Up Guide - Lowe's Camera Instruction...RC8221 Iris ™ Camera Set-Up Guide....

RC8221 Iris™ Camera Set-Up Guide

1RC8221 Iris™ Camera

Package ContentsA. CameraB. 6 ft long Power AdapterC. Camera Stand D. Mounting ScrewsE. Ethernet Cable

Chapter 1

IntroductionThis chapter provides details of the camera’s features, components and capabilities.

OverviewThank you for choosing Iris™ as your self-monitored home security service. The indoor video camera is an integral part of the Iris™ system. The camera comes complete with an integrated microcomputer and high-quality digital image-sensor, enabling it to display high-quality live streaming video.

To begin installation of your Iris™ camera: 1. Log into your Iris™ dashboard at lowes.com/iris and click the devices

link.2. Select add devices.3.Followtheonscreeninstructions.TheIris™systemwillfindyour

camera and add it to your system.

Features• High-def(720p)• Motion-triggered• Day/nightvision• Recordsautomaticallywhenalarmsaretriggered• Remotelymonitorfromsmartphone,tabletorcomputer

Wireless Features • SupportsIEEE802.11WirelessStations:Thecamerasupportsthe

IEEE802.11n,802.11band802.11gstandards.• WiredandWirelessNetworkSupport.TheNetworkcamerasupports

either wired or wireless transmission.• SecuritySupport:FullWEP(64/128Bit),WPAandWPA2standards

aresupportedontheWirelessinterface,allowingadvancedencryption of wireless data.

P/N: Document Version: 1.0, Copyright 2012. All Rights Reserved. All trademarks and trade names are the properties of their respective owners

A

B

C

E

D

2

Chapter 2

Basic SetupThis chapter provides details on how to setup and mount the camera.

System RequirementThe Iris™ camera requires the Iris™ smart hub for operation. To use the wireless interface on the wireless model, other wireless devices must be compliant with the IEEE802.11b, IEEE802.11g or IEEE 802.11n specifications. All Wireless stations must use compatible settings.

Front Panel1. Lens

No physical adjustment is required or possible for the lens, but you should ensure that the lens cover remains clean. The image quality is degraded if the lens cover is dirty or smudged.

2. Infrared Motion Sensor The infrared motion sensor is designed for human body detection.

3. Privacy LED On(Green)-The Privacy function is enabled. Off-The Privacy function is disabled.

Rear Panel1.LANport

Use a standard LAN cable to connect your Network camera to a 10/100BaseT (or faster) Ethernet router or switch.

The LAN cable should only be connected or disconnected when the camera is powered OFF. Attaching or detaching the LAN cable while the camera is powered on does NOT switch the interface between wired and wireless.

The LAN cable is only used while pairing the camera to Iris™. After pairing is complete, the LAN cable is no longer required for video data transmission. Please visit lowes.com/iris to learn more about pairing your camera with Iris™.

2. Power Input Connect the supplied 12V power adapter here. Do not use other power adapters; doing so may damage the camera.

3. External Input/Output GPIO terminal block including 1 input port and 1 output port.

The GPIO block is NOT used by Iris™.

4.MemoryCardSlot The memory card slot is not used with the Iris service and is disabled for all installations.

RC8221 Iris™ Camera

3

5. Privacy Button Enables/disables the camera’s privacy features. When on, the camera will not transmit images.

6. WPS Button The WPS button on the device (and on other wireless devices) is used to perform the WPS function that easily creates an encryption-secured wireless connection automatically.

NOTE:Wireless security is configured during the Iris™ pairing process (using the LAN cable). Please visit http://www.lowes.com/iris to learn more about pairing your camera with Iris™.

7. ResetButton This button is recessed; you need a pin or paper clip to depress it. It can be activated at any time the camera is in the “ready” mode.

When pressed and held over 10 seconds, the settings of Network camera will be set to their default values.

NOTE:After this procedure is completed, the Power LED will blink three times to confirm that the reset was completed successfully.

WARNING:Beforerestoringthecameratoitsfactorydefaults,makesurethatyouremoveitfromyourIris™devicelistfirst.Pleasevisitlowes.com/iris to learn more about removing devices from Iris™.

8. Power LED On(Green)-Power on.

Off-No power.

Blinking - The Power LED will blink during start up. This may take up to 30 seconds.

9.NetworkLED On(Green)-Network (Wireless or LAN) connection is available.

Off-Wireless or LAN is not connected or camera is not sending/receiving data.

Blinking(Green)-Data is being transmitted or received via the LAN or Wireless connection.

RC8221 Iris™ Camera

4

 

 

Setup the Camera

Step 1: Assemble the camera’s standa. Hold the metal screw up.

b. Face the back of the camera to the stand and turn the camera clockwise to attach it to the stand.

Note:At this time, please don’t connect the power adapter.

Step 2: Connect to Iris™Adding your Iris™ camera to an existing Iris™ system: 1. Set-up your camera as described in the steps above.

2. Log into your Iris™ dashboard at lowes.com/iris and click the devices link.

3. Select add devices.

4. Follow the on screen instructions. The Iris™ system will find your camera and add it to your system.

Adding your Iris™ camera to a new Iris™ system:1. Set-up your camera as described in the steps above.

2. Follow the installation process described in your Iris™ quick start guide.

3. The onscreen instructions will describe the steps to add your camera. The Iris™ system will find your camera and add it to your system.

RC8221 Iris™ Camera

5RC8221 Iris™ Camera

MountingtheCamera(Optional) Note:The camera can also be placed on a table using the stand provided.

Note:Please ensure the camera is configured and added to the network before permanent mounting.

Wall Mounting

Step 1: Install mount screwsa. Mark two points at the same height from the ground, where you would like

to mount your camera.

b. Screw in 2/3 of the length of the mounting screws into the wall.

Step 2: Mount the cameraa. Hook the mounting holes located at the bottom of the camera’s stand into

the mounting screws.

Step 3: Complete the camera’s mounta. Make sure the camera is firmly fixed on the wall.

b. Adjust the camera to the preferred position.

6RC8221 Iris™ Camera

Ceiling Mounting

Step 1: Disassemble the iron platea. Screw the swivel connector off the stand. Then use the screwdriver to

remove the screw of the stand base.

b. Disassemble the iron plate from the bottom of the stand.

Step 2: Install mount screwsa. Place the iron plate in the desired position of the ceiling. Screw the

mounting screws into ceiling through the 2 round holes of the iron plate.

Step 3: Mount the cameraa. Use the screwdriver to tighten the screw of the stand base.

b. Attach the swivel connector to the base by turning clockwise.

7RC8221 Iris™ Camera

Step4:Completethecamera’smounta. Make sure the camera is firmly fixed on the ceiling.

b. Adjust the camera to the preferred position.

c. Attach the camera to the swivel connector by turning it clockwise.

8RC8221 Iris™ Camera

Appendix A

Specifications

CameraModel Network Camera

Dimensions 63 mm (W) x 95 mm (H) x 35 mm (D)

Operating Temperature 0° C to 50° C

Video compression H.264, MPEG4 and MJPEG

Image resolution 1280 x 720, 640 x 480 (VGA, system default ), 320 x 240 (QVGA), 160 x 120 (QQVGA)

Storage Temperature -20° C to 70° C

NetworkProtocols TCP/IP, HTTP, HTTPS, DHCP, NTP, SMTP, UPnP, FTP, RTP/RTSP

NetworkInterface 1 Ethernet 10/100BaseT (RJ45) LAN connection

Wireless interface IEEE 802.11n/802.11b/802.11g compatible, Infrastructure/Ad-hoc mode, WEP 64/128 bit, WPA/WPA2 personal security support

LEDs 3

Micro-SD Card slot 1

Power Adapter 12V/1A, 100~240 VAC

Regulatory Approvals

FCC StatementThis equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).

9RC8221 Iris™ Camera

FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)Thisdevicemaynotcauseharmfulinterference,and

(2)Thisdevicemustacceptanyinterferencereceived,includinginterference that may cause undesired operation.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE ApprovalsThe camera and the Ethernet camera meet the guidelines of the European Union and comply with the 99/5/EEC and RTTE 99/5EG directives, including the following standards:

• EN60950

• EN300328

• EN301489-1

• EN301489-17

This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

This product is UL and cUL certified and comply with UL60950-1 Information Technology Equipment applicable requirement.

10RC8221 Cámara Iris™

Contenido del paqueteA. CámaraB.Adaptadordealimentaciónde1,80mC. Soporte para cámara D. Tornillos de montajeE. Cable Ethernet

Capítulo 1

IntroducciónEn este capítulo se ofrecen detalles sobre las características, los componentes y las capacidades de la Cámara.

Descripción generalGracias por elegir Iris como su servicio de seguridad doméstica con monitoreo automático. La cámara de video para interiores es una parte integral del sistema Iris. La cámara incluye una microcomputadora integrada y un sensor de imagen digital de alta calidad que permiten mostrar video de transmisión en vivo de alta calidad.

Características• Altadefinición(720p)• Activaciónpormovimiento• Visióndía/noche• Grabaautomáticamentecuandoseactivanlasalarmas• Monitoreademaneraremotadesdeunteléfonointeligente,tableto

computadora

Características inalámbricas • CompatibleconestacionesinalámbricasIEEE802.11:Estacámaraes

compatibleconlosestándaresIEEE802.11n,802.11by802.11g.• Compatibilidadconredesporcableeinalámbrica.Lacámarapara

redes es compatible con transmisión por cable e inalámbrica.• Compatibilidadconseguridad:LosestándaresWEP(64/128bits),

WPAyWPA2soncompatiblesconlainterfazinalámbrica,estopermite la encriptación avanzada de datos inalámbricos.

A

B

C

E

D

11

Capítulo 2

ConfiguraciónbásicaEn este capítulo se ofrecen detalles sobre cómo configurar y montar la cámara.

Requisitos del sistemaLa Cámara Iris™ necesita conectar con el hub de Iris™ para operar correctamente. Para usar la interfaz inalámbrica en el modelo inalámbrico, es necesario que otros dispositivos inalámbricos cumplan las especificaciones IEEE802.11b, IEEE802.11g o IEEE 802.11n. Todas las estaciones inalámbricas deben tener configuraciones compatibles.

Panel frontal1. Lente

No es necesario ni tampoco es posible realizar ajustes físicos al lente, pero debe asegurarse de mantener la cubierta del lente limpia. La calidad de imagen se degradará si la cubierta del lente está sucia o tiene manchas.

2. Sensor de movimiento infrarrojo El sensor de movimiento infrarrojo está diseñado para detectar el cuerpo humano.

3. Luz LED de privacidad Encendida: La función de privacidad está activada. Apagada: La función de privacidad está desactivada.

Panel posterior1.PuertoLAN

Use un cable LAN estándar para conectar la cámara para redes a un enrutador o conmutador Ethernet de 10/100BaseT (o superior).

Solamente debe conectar o desconectar el cable LAN cuando la cámara esté apagada. Conectar o desconectar el cable LAN mientras la cámara está encendida NO cambiará la interfaz entre inalámbrica y por cable.

El cable LAN se usa solamente durante el emparejamiento entre la cámara y Iris™. Cuando el emparejamiento haya finalizado, ya no se requiere el cable LAN para la transmisión de datos de video. Visite lowes.com/iris para conocer más sobre cómo emparejar su cámara con Iris™.

2. Entrada de alimentación Conecte el adaptador de alimentación de 12 V provisto aquí. No use otros adaptadores de alimentación; esto puede dañar la cámara.

3. Entrada y salida externa Bloque terminal GPIO (entrada y salida para fines generales, por su sigla en inglés) que incluye 1 puerto de entrada y 1 puerto de salida.

Iris™ NO utiliza el bloque GPIO.

4.Ranuraparalatarjetadememoria Iris™ no utiliza la ranura para la tarjeta de memoria y esta desactivada para todas las instalaciones.

RC8221 Cámara Iris™

12

5. Botón de privacidad Activa/desactiva la función de privacidad de la cámara. Si la privacidad esta activa, la cámara no transmite imagenes.

6. Botón WPS El botón WPS del dispositivo (y otros dispositivos inalámbricos) se usa para activar la función WPS que crea de manera automática una conexión inalámbrica asegurada por encriptación.

NOTA:La seguridad inalámbrica se configura durante el proceso de emparejamiento de Iris™ (mediante cable LAN). Visite lowes.com/iris para conocer más sobre cómo emparejar su cámara con Iris™.

7. Botónderestablecimiento Este botón se encuentra empotrado, necesita un alfiler o sujetapapeles para presionarlo. Se puede activar en cualquier momento mientras la cámara se encuentre en el modo “listo”.

Si se mantiene presionado durante más de 10 segundos, la configuración de la cámara para redes se restablecerá a sus valores predeterminados.

NOTA:Cuando este procedimiento haya finalizado, la luz LED parpadeará tres veces para confirmar que el restablecimiento se completó correctamente.

ADVERTENCIA:Antesderestablecerlacámaraasusvalorespredeterminados,asegúresedequitarladelalistadedispositivosde Iris™. Visite lowes.com/iris para conocer más sobre cómo quitar dispositivos de Iris™.

8. Luz LED de potencia Encendida(verde)-la cámara esta encendida.

Apagada - la cámara esta apagada.

Parpadeando - la luz LED parpadeará durante el arranque. Esto puede demorar hasta 30 segundos.

9. Luz LED de redes Encendida(verde)-conexión de redes (inalámbrica o LAN) esta activa.

Apagada - la red inalámbrica o LAN no está conectada o la cámara no envía ni recibe datos.

Parpadeando(verde)-transmisión o recepción de datos a través de conexión LAN o inalámbrica en proceso.

RC8221 Cámara Iris™

13

Configuracióndelacámara

Paso 1: Ensamble el soporte de la cámaraa. Sostenga el tornillo de metal hacia arriba.

b. Coloque la parte posterior de la cámara contra el soporte y gire la cámara en dirección de las manecillas del reloj para fijarla al soporte.

NOTA: Por favor no conecte el adaptador de alimentación hasta que sea dirigido por el sistema Iris™.

Paso 2: Conecte al servicio Iris™Cómo agregar la cámara Iris™ a un sistema Iris™ existente: 1. Configure la cámara como se describe más arriba.

2. Inicie sesión en el panel de control de Iris™ en lowes.com/iris y haga clic en el vínculo devices (dispositivos).

3. Seleccione add devices (agregar dispositivos).

4. Siga las instrucciones en pantalla. El sistema Iris™ detectará la cámara y la agregará al sistema.

Cómo agregar la cámara Iris™ Smart a un sistema Iris™ nuevo:1. Configure la cámara como se describe más arriba.

2. Siga el proceso de instalación que se describe en la guía de inicio rápido de Iris™.

3. Las instrucciones en pantalla describirán los pasos para agregar la cámara. El sistema Iris™ detectará la cámara y la agregará al sistema.

RC8221 Cámara Iris™

14RC8221 Cámara Iris™

Cómomontarlacámaraparainteriores(opcional) Nota:También puede colocar la cámara sobre una mesa usando el soporte

provisto.

Nota:Asegúrese de que la cámara esté configurada y agregada a la red antes de montarla de manera permanente.

Montaje en la pared

Paso 1: Instale los tornillos de montajea. Marque dos puntos a la misma altura desde el piso, donde le gustaría

montar la cámara para interiores.

b. Atornille dos tercios de la longitud de los tornillos de montaje en la pared.

Paso 2: Monte la cámaraa. Enganche los orificios de montaje ubicados en la parte inferior del soporte

de la cámara en los tornillos de montaje.

Paso 3: Finalice el montaje de la cámaraa. Asegúrese de que la cámara esté fijada con firmeza a la pared.

b. Ajuste la cámara a la posición preferida.

15RC8221 Cámara Iris™

Montaje en el techo

Paso 1: Desensamble la placa de hierroa. Desatornille el conector giratorio del soporte. Luego use el destornillador

para quitar el tornillo de la base del soporte.

b. Desensamble la placa de hierro de la parte inferior del soporte.

Paso 2: Instale los tornillos de montajea. Coloque la placa de hierro en la posición deseada en el techo. Atornille

los tornillos de montaje en el techo a través de los orificios redondos de la placa de hierro.

Paso 3: Monte la cámaraa. Use el destornillador para apretar el tornillo de la base del soporte.

b. Fije el conector giratorio a la base, girándola en dirección de las manecillas del reloj.

16RC8221 Cámara Iris™

Paso4:Finaliceelmontajedelacámaraa. Asegúrese de que la cámara esté fijada con firmeza al techo.

b. Ajuste la cámara a la posición preferida.

c. Fije la cámara al conector giratorio girándola en dirección de las manecillas del reloj.

17RC8221 Cámara Iris™

Anexo A

Especificaciones

CámaraModelo Cámara para redes

Dimensiones 63mm (A) x 95mm (AL) x 35mm (P)

Temperatura de funcionamiento 0° C to 50° C

Compresión de video H.264, MPEG4 y MJPEG

Resolución de imagen 1280 x 720, 640 x 480 (VGA, valores predeterminados del sistema ), 320 x 240 (QVGA), 160 x 120 (QQVGA)

Temperatura de almacenamiento -20° C to 70° C

Protocolos de protección TCP/IP, HTTP, HTTPS, DHCP, NTP, SMTP, UPnP, FTP, RTP/RTSP

Interfaz de redes 1 Conexión LAN Ethernet 10/100BaseT (RJ45)

Interfaz inalámbrica IEEE 802.11n/802.11b/802.11g compatible, modo infraestructura/ad-hoc, WEP 64/128 bits, WPA/WPA2 soporte de seguridad personal

Luces LED 3

Ranura para la tarjeta micro SD 1

Adaptador de alimentación 12V/1A, 100~240 VAC

Aprobaciones regulatorias

Declaración de FCCEste equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede causar interferencia perjudicial a las comunicaciones de radio. Sin embargo, no se garantiza que no se producirán interferencias en una instalación en especial. Si este equipo genera interferencia perjudicial a la recepción de radio o televisión, lo que se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia con una de las siguientes medidas:

• Reorienteoreubiquelaantenaderecepción.

• Aumentelaseparaciónentreelequipoyelreceptor.

• Conecteelequipoauntomacorrientedeuncircuitodistintoalqueusaelreceptor.

• Soliciteayudaaldistribuidoroauntécnicoconexperienciaenradio/TV.

Para asegurar el cumplimiento continuo, cualquier cambio o modificación que no estén expresamente aprobados por la parte responsable del cumplimiento podrían anular la autorización del usuario para utilizar este equipo. (Ejemplo: solamente utilice cables protegidos cuando se conecte a una computadora o dispositivos periféricos).

18RC8221 Cámara Iris™

Declaración de exposición a radiación de FCCEste equipo cumple con los límites de exposición a la radiación de radiofrecuencia de FCC establecidos para un entorno no controlado. El equipo se debe instalar y operar a una distancia mínima de 20 cm entre el radiador y usted.

Este dispositivo cumple con la sección 15 de las reglas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones:

(1)Estedispositivonodebecausarinterferenciaperjudicial,y

(2)Estedispositivodeberáaceptarcualquierinterferenciarecibida,incluida la interferencia que pudiese causar un funcionamiento no deseado.

El transmisor no se debe ubicar ni operar en conjunto con otra antena o transmisor.

Aprobado por la CELa cámara para interiores y la cámara para interiores Ethernet cumplen con las pautas de la Unión europea y con las directrices 99/5/EEC y RTTE 99/5EG, incluidos los siguientes estándares:

• EN60950

• EN300328

• EN301489-1

• EN301489-17

Este es un producto de clase B. En un entorno doméstico, es posible que este producto cause interferencia radial. De ser así, es posible que se le solicite al usuario tomar las medidas adecuadas.

Este producto cuenta con certificación UL y cUL y cumple con el requisito correspondiente Equipo de tecnología de la información UL60950-1.

P/N: Versión de documento: 1.0, Copyright 2012. Todos los derechos reservados. Todos los nombres y las marcas comerciales son propiedad de sus respectivos propietarios.P/N: Document Version: 1.0, Copyright 2012. All Rights Reserved. All trademarks and trade names are the properties of their respective owners