(R.C. 6135) Operator of the NNPC/Chevron Joint...
1
CHEVRON NIGERIA LIMITED Operator of the NNPC/Chevron Joint Venture Management Chevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B. 12825, Lagos. CLOSING DATE: Please note the following: Please visit NipeX portal at www.nipex-ng.com for this advert and other information. INTRODUCTION: MANDATORY TENDER REQUIREMENTS: SCOPE OF WORK: I. (R.C. 6135) C. D. NIGERIAN CONTENT REQUIREMENTS: 1. 5. NNPC/Chevron Nigeria Limited Joint Venture invites interested and prequalified companies for this tender opportunity for the supply of MRO (Maintenance, Repair and Operating Spares). These items will be utilized for maintaining various types of plants, equipment and machineries across various locations and operations of Chevron Nigeria Limited and affiliated JV/PSC Companies. The proposed contract term is 2 (two) years with an option of 1 (one) year extension. TENDER OPPORTUNITY FOR SUPPLY OF MAINTENANCE, REPAIR AND OPERATING SPARES (MRO) IN SUPPORT OF OIL AND GAS EXPLORATION AND PRODUCTION OPERATIONS IN ALL CHEVRON LOCATIONS IN NIGERIA NipeX Tender Nos: CNL 00000039 00000040 00000041 The scope of supplies under the MRO call-off purchase contract is for the following categories of parts and spares, and will consist of approximately 10,000 various MRO materials: A. Pipes, Valves & Fittings Pipes - Pipes, Tubes, Hoses, Hubs, Pipe Penetrators. Valves - Various types of Control and other valves and accessories. Fittings - Flanges, Elbows, Bolts, Gaskets, Fitting Hangers, and Pipe Support. B. Electrical - (Cables, Cords, Wires, Conduit and Accessories). C. Safety - (PPE, Extinguisher, Windsock, Gloves, Tag and other Safety / Security / Protection Control Systems /Firefighting Equipment and Accessories). Pipes, Valves & Fittings - 2.01.01 (Pipes &Tubes), 2.01.02 (Non-metal Pipes & Tubes), 2.01.03 (Hoses), 2.01.04 (Gaskets, Jointings, Packings & Tightenings), 2.01.05 (Flexible &Insulated Pipes/Tubes) and 2.02.01 (Valves) and 2.03.03 (Bolts & Nuts) Electrical - 1.09.03 (Distribution/Control Equipment and Accessories), 1.09.05 (Lamps, Lighting Fixtures, Lighting Equipment),1.09.06 (Cables, Cords, Wires & Accessories),1.09.08 (Transits, Glands and Electrical Equipment) Safety - 1.16.02 (Safety & Protection Equipment /Products, Life Boats/Rafts & Escape Route), 1.16.03 (Firefighting Equipment/Product) and 1.16.04 (Fire/Gas Detection/ Protection Systems) A. To be eligible for this tender exercise, interested bidders are required to be pre - qualified in the following categories in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in these categories by the bid close date will receive Invitation to Technical Tender (ITT). ii. iii. Please note that interested bidders including their sub-contractor(s) shall be required to: I. Meet all JQS mandatory requirements to be listed as "PREQUALIFIED" and "LIVE" for a category in the JQS database. To determine if you are pre-qualified and view the product/service category you are listed for: Open www.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group. B. E. Chevron Nigeria Limited is committed to the development of the Nigerian Oil and Gas business in observance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010. Tenderer shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion and who are not registered in the NCDMB NOGIC JQS database will not be allowed to participate in next Tender Stage. Demonstrate that the entity is a Nigerian Registered Company, or a Nigerian Registered Company in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria Tenderer shall provide evidence of registration on the NCDMB NOGIC JQS, furnish details of company ownership, shareholding structure and submit clear photocopies of your CAC Forms CO2 and Co7. Tenderer shall describe in its plan for the procurement of following project materials, equipment packages and consumables to be locally sourced on this contract. The Plan should include details of how tenderers will utilise the services of Nigerian companies. However, 1st considerations shall be given to human resources, goods and materials of Nigerian origin, products and services of which there is proven in-country production capacity and finishing including ongoing investment into plant and facility towards manufacture, assembly and testing e.g. electrical cables, safety PPE, extinguishers, line pipes, valves and fittings, bolts and nuts, ropes, paint protective coating, anodes, OCTG, etc Provide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of Nigerian Content contact or manager. Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years. Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box). Location of in-country facilities, (Equipment, storage, workshops, repair & maintenance facilities and, testing facilities). Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services. Tenderer to provide evidence of at least 50% Nigerian ownership of all equipment to be deployed and a valid category A & B Nigerian Content Equipment Certificate (NCEC) issued by the Nigerian Content Development & Monitoring Board in respect of any components, spares, equipment, systems and packages to be used on the project. A. B. C. D. E. F. G. H. I. Only bidders who are registered with respective NJQS Product/Category codes indicated in item 3A by 16:00 Hours, 22th May, 2017 being the advert close date shall be invited to submit technical bid. II. Bidders must be registered on NCDMB NOGICD JQS. Bidders not registered on the NCDMB NOGICD JQS shall not progress to the next phase of the tender process. To initiate and complete the JQS prequalification process, access www.nipex- ng.com to download the application form, make necessary payments and contact NipeX office for further action. If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update. Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB). The following are the Nigerian Content requirements bidders are expected to comply with in their technical bid submission. Please note that all interested bidders are expected to participate in each of the indicated product categories of this tender on a holistic basis, without any exemptions. Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under this product/service category. The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX. All costs incurred in preparing and processing NJQS prequalification shall be to the contractor's accounts. This advertisement shall neither be construed as any form of commitment on the part of Chevron Nigeria Limited to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from Chevron Nigeria Limited and or any of its partners by virtue of such companies having been prequalified in NJQS. The tendering process shall be the NNPC contracting process requiring pre- qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders. Chevron Nigeria Limited will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents. 2. 3. 4. 6.
Transcript of (R.C. 6135) Operator of the NNPC/Chevron Joint...
CHEVRON NIGERIA LIMITED
Operator of the NNPC/Chevron Joint Venture
ManagementChevron Nigeria Limited, 2 Chevron Drive, Lekki Peninsula, P.M.B. 12825, Lagos.
CLOSING DATE:
Please note the following:
Please visit NipeX portal at www.nipex-ng.com for this advert and other information.
INTRODUCTION:
MANDATORY TENDER REQUIREMENTS:
SCOPE OF WORK:
I.
(R.C. 6135)
C.
D.
NIGERIAN CONTENT REQUIREMENTS:
1.
5.
NNPC/Chevron Nigeria Limited Joint Venture invites interested and prequalified companies for this tender opportunity for the supply of MRO (Maintenance, Repair and Operating Spares). These items will be utilized for maintaining various types of plants, equipment and machineries across various locations and operations of Chevron Nigeria Limited and affiliated JV/PSC Companies. The proposed contract term is 2 (two) years with an option of 1 (one) year extension.
TENDER OPPORTUNITYFOR SUPPLY OF MAINTENANCE, REPAIR AND OPERATING SPARES (MRO) IN SUPPORT OF OIL AND
GAS EXPLORATION AND PRODUCTION OPERATIONS IN ALL CHEVRON LOCATIONS IN NIGERIANipeX Tender Nos: CNL 00000039 00000040 00000041
The scope of supplies under the MRO call-off purchase contract is for the following categories of parts and spares, and will consist of approximately 10,000 various MRO materials:
A. Pipes, Valves & Fittings Pipes - Pipes, Tubes, Hoses, Hubs, Pipe Penetrators. Valves - Various types of Control and other valves and accessories. Fittings - Flanges, Elbows, Bolts, Gaskets, Fitting Hangers, and Pipe Support.B. Electrical - (Cables, Cords, Wires, Conduit and Accessories).C. Safety - (PPE, Extinguisher, Windsock, Gloves, Tag and other Safety / Security / Protection Control Systems /Firefighting Equipment and Accessories).
Pipes, Valves & Fittings - 2.01.01 (Pipes &Tubes), 2.01.02 (Non-metal Pipes & Tubes), 2.01.03 (Hoses), 2.01.04 (Gaskets, Jointings, Packings & Tightenings), 2.01.05 (Flexible &Insulated Pipes/Tubes) and 2.02.01 (Valves) and 2.03.03 (Bolts & Nuts)Electrical - 1.09.03 (Distribution/Control Equipment and Accessories), 1.09.05 (Lamps, Lighting Fixtures, Lighting Equipment),1.09.06 (Cables, Cords, Wires & Accessories),1.09.08 (Transits, Glands and Electrical Equipment)Safety - 1.16.02 (Safety & Protection Equipment /Products, Life Boats/Rafts & Escape Route), 1.16.03 (Firefighting Equipment/Product) and 1.16.04 (Fire/Gas Detection/ Protection Systems)
A. To be eligible for this tender exercise, interested bidders are required to be pre - qualified in the following categories in the NipeX Joint Qualification System (NJQS) database.
All successfully pre-qualified suppliers in these categories by the bid close date will receive Invitation to Technical Tender (ITT).
ii.
iii.
Please note that interested bidders including their sub-contractor(s) shall be required to:
I. Meet all JQS mandatory requirements to be listed as "PREQUALIFIED" and "LIVE" for a category in the JQS database.
To determine if you are pre-qualified and view the product/service category you are listed for: Open www.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product group.
B.
E.
Chevron Nigeria Limited is committed to the development of the Nigerian Oil and Gas business in observance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
Tenderer shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion and who are not registered in the NCDMB NOGIC JQS database will not be allowed to participate in next Tender Stage.
Demonstrate that the entity is a Nigerian Registered Company, or a Nigerian Registered Company in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in NigeriaTenderer shall provide evidence of registration on the NCDMB NOGIC JQS, furnish details of company ownership, shareholding structure and submit clear photocopies of your CAC Forms CO2 and Co7.Tenderer shall describe in its plan for the procurement of following project materials, equipment packages and consumables to be locally sourced on this contract. The Plan should include details of how tenderers will utilise the services of Nigerian companies. However, 1st considerations shall be given to human resources, goods and materials of Nigerian origin, products and services of which there is proven in-country production capacity and finishing including ongoing investment into plant and facility towards manufacture, assembly and testing e.g. electrical cables, safety PPE, extinguishers, line pipes, valves and fittings, bolts and nuts, ropes, paint protective coating, anodes, OCTG, etcProvide a Nigerian Content Plan with a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that will be involved in executing the work. Also provide details of Nigerian Content contact or manager.Specific to this project, provide detailed plan for staff training and development on engineering, project management and procurement (including all software to be used, number of personnel, name of organization providing such training and evidence of past training record) for Nigerian personnel including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years.Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).Location of in-country facilities, (Equipment, storage, workshops, repair & maintenance facilities and, testing facilities).Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.Tenderer to provide evidence of at least 50% Nigerian ownership of all equipment to be deployed and a valid category A & B Nigerian Content Equipment Certificate (NCEC) issued by the Nigerian Content Development & Monitoring Board in respect of any components, spares, equipment, systems and packages to be used on the project.
A.
B.
C.
D.
E.
F.
G.
H.
I.
Only bidders who are registered with respective NJQS Product/Category codes indicated in item 3A by 16:00 Hours, 22th May, 2017 being the advert close date shall be invited to submit technical bid.
II. Bidders must be registered on NCDMB NOGICD JQS. Bidders not registered on the NCDMB NOGICD JQS shall not progress to the next phase of the tender process.
To initiate and complete the JQS prequalification process, access www.nipex-ng.com to download the application form, make necessary payments and contact NipeX office for further action.
If you are not listed in this product/service category, and you are registered with DPR to do business for this category, please contact NipeX office at 30, Oyinkan Abayomi drive, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
The following are the Nigerian Content requirements bidders are expected to comply with in their technical bid submission.
Please note that all interested bidders are expected to participate in each of the indicated product categories of this tender on a holistic basis, without any exemptions.
Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under this product/service category.The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX.All costs incurred in preparing and processing NJQS prequalification shall be to the contractor's accounts.This advertisement shall neither be construed as any form of commitment on the part of Chevron Nigeria Limited to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from Chevron Nigeria Limited and or any of its partners by virtue of such companies having been prequalified in NJQS.The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders. Chevron Nigeria Limited will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.
2.
3.
4.
6.
