Razor Knife Safety Training
-
Upload
dan-junkins -
Category
Technology
-
view
3.441 -
download
0
Transcript of Razor Knife Safety Training
![Page 1: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/1.jpg)
1BOISE Packaging--Wallula
Razor Knife SafetyRazor Knife Safety
![Page 2: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/2.jpg)
BOISE Packaging--Wallula2
Always be sure that blades are properly seated in knives and that knives are properly closed and/or fastened together before use.
![Page 3: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/3.jpg)
BOISE Packaging--Wallula3
A dull blade requires more force and is more likely to slip than a sharp one. Change the blade whenever it starts to tear instead of cut.
Always use sharp blades.
![Page 4: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/4.jpg)
BOISE Packaging--Wallula4
Always keep your free hand (and other body parts) away from the line of the cut.
Always wear a cut resistant glove on your free hand while cutting with a razor knife.
![Page 5: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/5.jpg)
BOISE Packaging--Wallula5
Always pull—
never push the knife.
The blade could break off—wedging in the material and cutting your arm severely.
![Page 6: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/6.jpg)
BOISE Packaging--Wallula6
Don’t bend or apply side loads to blades by using them to open cans, loosen screws or pry loose objects
Blades are brittle and can snap easily.
![Page 7: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/7.jpg)
BOISE Packaging--Wallula7
Never leave a blade open.
Always retract the blade when not in use.
![Page 8: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/8.jpg)
BOISE Packaging--Wallula8
When making cut-outs on rolls always pull the knife down. Never push it away from you.
When using a knife to cut through thick materials, be patient - make several passes, cutting a little deeper into the material with each pass.
![Page 9: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/9.jpg)
BOISE Packaging--Wallula9
Tips For Changing BladesTips For Changing Blades
Carefully remove the used blade from the knife.
Always hold the blade at the non-sharp side.Discard the used blade in a safe place.
Carefully wrap it in several layers of tape to cover sharp side and points.
Make sure to re-assemble the knife correctly. Make sure screw is tight.
![Page 10: Razor Knife Safety Training](https://reader034.fdocuments.us/reader034/viewer/2022052523/55575529d8b42a63448b4f5c/html5/thumbnails/10.jpg)
BOISE Packaging--Wallula10
Always Report Any Injury to Always Report Any Injury to Your Supervisor.Your Supervisor.