RAYCHEM(4)
2
04 CABLE TERMINATION & ACCESSORIES א 4-34 FOSC-100B2/H INTEGRATED FIBRE OPTIC SPLICE CLOSURE This is a compact closure suitable for a variety of cable constructions and is designed for aerial, buried and manhole use. The high performance moulded parts are easy to install and have a high split resistance. FOSC-400 FIBRE OPTIC SPLICE CLOSURE FOSC 400 is a fibre optic slice closure with excellence in sealing, fibre management, ease of use and design flexibility. 1) Capacity is 16 with standard 65 mm fusion splice protectors, 32 with Raychem 45 mm SMOUV fusion splice protectors. 2) Varies with splice type. Cpacity is 16 for most commonly used mechanical splices. PedCap GTM COLD—APPLIED PEDESTAL SPLICE CLOSURE PedCap GTM is a cold applied, rugged, rectangular cap made of high-performance material that offers mechanical protection and fits neatly into all pedestals. It consists of a tough aluminium-laminate bag with preapplied gel sealing tape which fits inside the plastic cap and prevents moisture ingress into the splice INTEGRATED FIBRE OPTIC SPLICE CLOSURE
description
raych
Transcript of RAYCHEM(4)
04
CABLE TERMINATION & ACCESSORIES א
4-34
FOSC-100B2/H INTEGRATED FIBRE OPTIC SPLICE CLOSURE This is a compact closure suitable for a variety of cable constructions and is designed for aerial, buried and manhole use. The high performance moulded parts are easy to install and have a high split resistance.
FOSC-400 FIBRE OPTIC SPLICE CLOSURE FOSC 400 is a fibre optic slice closure with excellence in sealing, fibre management, ease of use and design flexibility.
1) Capacity is 16 with standard 65 mm fusion splice protectors, 32 with Raychem 45 mm SMOUV fusion splice protectors.
2) Varies with splice type. Cpacity is 16 for most commonly used mechanical splices.
PedCap GTM COLD—APPLIED PEDESTAL SPLICE CLOSURE PedCap GTM is a cold applied, rugged, rectangular cap made of high-performance material that offers mechanical protection and fits neatly into all pedestals. It consists of a tough aluminium-laminate bag with preapplied gel sealing tape which fits inside the plastic cap and prevents moisture ingress into the splice
INTEGRATED FIBRE OPTIC SPLICE CLOSURE
CABLE TERMINATION & ACCESSORIES א
04
4-35
TDUX INFLATABLE SEALING SYSTEM TDUX is unique inflatable wraparound duct seal system for underground application. It is meant to permanently seal telephone cable ducts and preventing leakage of water from the duct into exchange vaults or manholes.
Installation tools TDUX duct seals can be installed with a wide variety of inflation tools, having the capability to inflate TDUX to 3.0 ± 0.2 bar of pressure. Following tools are available from Raychem.
TDUX-IT-16 Inflation tools using CO@ gas cylin-ders. The tools is designed with an ON/OFF switch and has an auto-matic pressure monitoring system to guarantee the required inflation pressure of 3.0 ± 0.2 bar
TDUX-IG-SR-AS Inflation gun to be connected to a pressurised air bottle, pump or compressor, having an outlet pres-sure of 4 to 10 bar to feed the inflat-ing gun. The inflating gun is de-signed with a safety relieve valve and audio signal device to facilitate the installation.
* To seal duct occupied with more than 2 cables, TDUX-CL clips are available as separate items. Con-tact Raychem for more specific information on TDUX-CL clips.
SMOUV FIBRE OPTIC FUSION SPLICE PROTECTION AND SUPPORT SLEEVE The SMOUV solution is used to reinstate the protective buff-ering around the bare fibre and adequately support the fin-ished splice when Optical Fibres are spliced by fusion tech-nique.
