RAPTOR 55 XP - RESEMIN · RAPTOR 55 XP is an electro-hydraulic rig for long hole drilling, ......
4
www.resemin.com RAPTOR 55 XP Production long hole rig for medium sections RAPTOR 55 XP is an electro-hydraulic rig for long hole drilling, It has an hydraulic boom, 5APC model, with parallel holding. Use a Montabert Drifter HC 95 with 22 kW and Back -Hammering- rods extractor, the most modern rock drill in the market. It comes equipped with the BARYCENTRE system to synchronize automatically the drilling and rotation axes; this system facilitates the drilling of radial and parallel holes with reduced times for positioning. The 8000 series feed beam with 3 Stingers provide the best stability to reduce the deviation. Includes Magazine for 14 rods, optional 21 rods. Full 360°, horizontal coverage with parallel holding is 3.60 m; maximum length of drilling up to 30 m, diameters up to 102 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub level and benching. • Block Caving. • VCR and Cable Bolting application.
Transcript of RAPTOR 55 XP - RESEMIN · RAPTOR 55 XP is an electro-hydraulic rig for long hole drilling, ......
www.resemin.com
RAPTOR 55 XPProduction long hole rig for medium sections
RAPTOR 55 XP is an electro-hydraulic rig for long hole drilling, It has an hydraulic boom, 5APC model, with parallel holding. Use a Montabert Drifter HC 95 with 22 kW and Back -Hammering- rods extractor, the most modern rock drill in the market.
It comes equipped with the BARYCENTRE system to synchronize automatically the drilling and rotation axes; this system facilitates the drilling of radial and parallel holes with reduced times for positioning. The 8000 series feed beam with 3 Stingers provide the best stability to reduce the deviation. Includes Magazine for 14 rods, optional 21 rods.
Full 360°, horizontal coverage with parallel holding is 3.60 m; maximum length of drilling up to 30 m, diameters up to 102 mm bit, Reamer 127 mm.
Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
Applications:
• Sub level and benching.• Block Caving.• VCR and Cable Bolting application.
www.resemin.com
Raptor 55 XP Technical specifications
SPECIFICATIONS
DRIFTER• Model• Percussion power• Percussion pressure• Frequency percussion• Rotation speed• Rotation torque• Hole diameter• Rhymed diameter• Maximum drilling length • Lub air consumption• Lub oil consumption• Water consumption• Shank adapter• Weight
Montabert, HC9522 kW
170 - 200 bar68 Hz
0 - 287 rpm480 - 950 Nm
51 - 89 mm75 - 127 mm
to 35 m6 l/s (a 2.5 bar)
0.8 cc/min3 - 4 l/s (to 9 bar)
T38, T45, T51 Male185 kg
FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard feed• Options• 3 stinger to stabilize while drilling• Rod handling • Options• Digital inclinometer for measuring
angles
RE 8000 SeriesHydraulic motor and chain
715 mmBull 1205 ft rods4, 6 rods
10 + 1 Rods21 + 1 Rods
Transtronic
CARRIER• Model• Diesel engine• Power• Exhaust catalyst• Transmission• Powershift gearbox• Axle front / rear• Rear axle oscillating• Positioning pump• Service brakes• Emergency and parking brakes
• Tyres• Steering (articulated carrier)• Hydraulic jacks • Battery• Electric system• Gradeability • Canopy• Tramming lights• Centralized lubrication system• Drilling lubrication system• Automatic fire suppression
system• Fire extinguisher• High-pressure washing system• Reel grease gun
C66.1
Deutz BF4L914, Tier II, EPA II72.4 kW @ 2300 rpm
StandardHydrodynamics
Dana, T12000Dana, Serie 112Parker, P315 B
± 8°Separate
SAHR (Spring Applied Hydraulic Release)
12.00 x R 20±41°
2 extendable front, 2 rear2x12 V, 90 Ah
24 VDC0 - 15°
FOPS / ROPS8X, Halogen 65W HD, 24 V
SKFSKF
ANSUL, 6 nozzles 1x6kg, Type ABC
www.resemin.com
Raptor 55 XP Technical specifications
BOOM• Model• Automatic parallelism• Boom extension• Angle lift• Swing angle• Feed roll-over• Hydraulic cylinders
Boom 5 AP - C
1000 mm+53°/ -20°
± 30°360°
Parker
HYDRAULIC CONTROL SYSTEM• Direct control valve• Percussion pump (compensated
pressure)• Rotation pump • Working pressure• Hydraulic oil tank volume• Hydraulic return filter• Hydraulic pressure filter • Saturation hydraulic filter
indicator • Indicator of low oil• Indicator temperature oil
WATER AND AIR SYSTEM• Compressor• Maximum capacity• Working pressure• Water pump with hydraulic motor• Maximum capacity• Minimum inlet pressure• Bowman cooler
GA30178 CFM
9.1 BarGrundfoss, CR5 - 9
6.9 m3/h2 bar
FG120, 48.6 GPM, 20 bar
Parker KA-18 Rexroth A10VO100
Parker PGP620200 bar
130 lParker, 10µParker, 20µ
ParkerHydacHydac
ELECTRIC SYSTEM• Electric motor• Voltages• Frecuency• Starting method• Option to 1000 VAC• Overload protection and
ground fault• Percussion hour meter• Phase sequence indicator• Battery charger• Electric transformer• Working lights• Electric cable reel• Electric cable• Protection degree
ABB - 75kW / 100 HP
380 - 440 - 550 - 690 -1000 V50 - 60 Hz
Star - DeltaDirect start
Schneider, Module VIGIIn the control panel
Siemens32 VAC, 300W, 13A
3,5 kVA2X, LED N44, 50W, 6700 lm, 24 V
90 m3X1/0 - AWG (50mm)
IP 55
BARYCENTER SYSTEM“Drilling Axis and Rotation Axis are synchronized”
www.resemin.com
Raptor 55 XP Technical specifications
DIMENSIONS
Rev
. 16
0923
©
Cop
yrig
ht 2
016
R
ES
EM
IN. S
peci
ficat
ions
and
equ
ipm
ent a
re s
ubje
ct to
cha
nge
with
out f
urth
er n
otic
e.
Total weight 14,537 Kg.
TURN RADIOCOVERAGE AREA
OPTION: Close cab with Air Conditioning
