Rapid Prototyping
description
Transcript of Rapid Prototyping
EML 2023
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
2
additive technique layer of powder placed on base high power laser used to fuse
selected parts of the powder the powder bed is lowered a
small amount and a new layer of powder is spread
does not require any support structures
3
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
4
additive techniquematerial is laid down in layersplastic material is melted in
a nozzle that moves in XYdirection
typically uses ABS plasticsupport material is required
stratasys5
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
6
additive processuses a vat of liquid UV-curable
resin and a UV laserexposure to the laser causes
the material to hardenafter a pattern has been traced,
the platform descends and aresin filled blade recoats the top
requires support structures7
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
8
sheet is adhered to substratewith a heated roller
laser traces out the outlineof the layer
non-part areas are cross-hatched to facilitate removalof waste material
next layer is pulled across and the process is repeated
9
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
10
metal parts are made from a metal powder
a layer of powder is spread and the part region is melted together by a computer controlled electron beam
11
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
12
“inkjet” type processa fine powder of plaster or corn
starch is bonded by “printing” an adhesive from the printhead
considered the fastest technique
zcorp 13
Prototyping Technologies Base MaterialsSelective laser sintering (SLS) Thermoplastics, metal powdersFused deposition modeling (FDM) Thermoplastics, eutectic metalsStereolithography (SLA) PhotopolymerLaminated object manufacturing (LOM)
Paper
Electron beam melting (EBM) Titanium alloys3D printing (3DP) Various Materials
14
Dimension SST (Soluble Support Technology)
Building MAE-C15
Dimension SST (Soluble Support Technology)
888”build volume
16
Dimension Uprint (Soluble Support Technology)
Building MAE-B17
868”build volume
18
19
20
21
22