RANOP2 00 RU10 vs 2.0 Introductions
Transcript of RANOP2 00 RU10 vs 2.0 Introductions
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 1/16
1 © Nokia Siemens Networks Presentation / Author / Date
Soc Classification level
3G RANOP II
RU10
content of chapters
Nokia Siemens Networks
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 2/16
2 © Nokia Siemens Networks Presentation / Author / Date
Soc Classification level
Course Objectives
• Explain how NSN RRM/RAN-KPI in 3G
RU10 is working, what can be improvedwithin OSS
• Describe the RAN/PI potentials of network
tuning
• Identify the relations between RAN-
KPI/Counters and entities• Describe impacts of parameter database
and NW performance
• Describe the main 3G RAN measurements
& KPIs & proposed target value to them
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 3/16
Soc Classification level
3 © Nokia Siemens Networks Presentation / Author / Date
Course Content
OSS-Optimization material contains:
Module 1 – KPI definition & overview (58 pages)
Module 2 – Performance monitoring & data analysis (79 pages)
Module 3 – Air interface and neighbor optimization (95 pages)
Module 4 – Capacity management & optimization (156 pages)
Module 5 – Paging and inter-RNC optimization (36 pages)
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 4/16
Soc Classification level
4 © Nokia Siemens Networks Presentation / Author / Date
Module 1 – KPI definition & overview
Objectives
At the end of the module you will be able to:• Describe 3G RAN main classification and principles of optimization
• Measurements & KPIs & proposed target value to them
• Describe the affecting network performance counters
• Describe the content in RU10 reporting suites
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 5/165 © Nokia Siemens Networks Presentation / Author / Date
Soc Classification level
KPI overview
Principles of 3G network optimizations
Principles of performance measurements and KPI classification
Examples for KPI construction
- Call Setup Failure Rate,
- Call Setup success rate
- Blocking Rate,
- Call Drop Rate,
- HO Failure Rate
- Statistic examples
Reporting suites
- Classes of counters,- main existing KPI
- examples of statistics
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 6/16
Soc Classification level
6 © Nokia Siemens Networks Presentation / Author / Date
Module 2 – Performance monitoring & data analysis
Objectives
At the end of the module you will be able to:Describe 3G RAN performance monitoring process within R99/R5/6
High level KPIs -> PIs -> Counters
Busy Hour problematic & reporting periods
RRC/RAB setup/access failure
Session setup failure (NRT, HSDPA, HSUPA)
SHO/ISHO session/event failures
HSDPA setup & throughput and their failures
List possible reasons for failures & improvement activities
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 7/16
Soc Classification level
7 © Nokia Siemens Networks Presentation / Author / Date
Performance monitoring
KPI analysis hierarchy
Call/Session setup monitoring & analysis
Release 99: call setup (RRC/RAB)
R99: Call Drop
- Radio link failure rate
- Radio link success rate
R99: Mobility (SHO, HHO, ISHO)
HSDPA setup
HSDPA mobility (Serving Cell Change)
RRC states
Appendix
- failure events
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 8/16
Soc Classification level
8 © Nokia Siemens Networks Presentation / Author / Date
Module 3- Neighbour & RF Optimization
Objectives
At the end of the module you will be able to:
• Describe the main measurement elements/parameters to optimize
neighbour cells,
• Describe measurement methods to identify KPI’s for neighbour list
optimization
• Match counters with KPI to tune the overall NW performance
• Learn how neighbours & RF optimization can be done with tools
(Optimizer2.0 and E-NAPS)
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 9/16
9 © Nokia Siemens Networks Presentation / Author / Date
Soc Classification level
Air interface and neighbor optimization
Air interface improvement potentials (QoS)
- Ec/Io (quality vs. RSCP)
- little i (cell overlap by Tx PwR)
- UL/DL performance (Tx PwR/RTWP)
- CQI benchmark (quality)
- AMR features
Propagation Delay
Neighbour optimization methods
- cell matrix evaluations,
- CPICH PwR overshooting, CPICH Ec/Io
- cell overlap and impact of RT/NRT traffic
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 10/16
10 © Nokia Siemens Networks Presentation / Author / Date
Soc Classification level
Air interface and neighbor optimization
Adjacency based measurements
- advanced measurement methods for neighbours
- SHO overhead, filters, margin offsets
- E1A/E1B window offset analysis
NetAct tools (optimiser)
- detected cell reporting automatic neighbour planning
- Detected set measurements
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 11/16
Soc Classification level
11 © Nokia Siemens Networks Presentation / Author / Date
Module 4 – Capacity Management
Objectives
At the end of the module you will be able to:
• Describe 3G RAN traffic, load, blocking due to different
szenarious
• Describe 3G monitoring and potentials of capacity enhancement
load features
• Describe 3G/HSPA counters & KPI’s to improve capacity by lessblocking
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 12/16
Soc Classification level
12 © Nokia Siemens Networks Presentation / Author / Date
Capacity optimization
Principles of Capacity Monitoring
- Counter & KPI definitions,
- Counter & KPI work flow, potentials of NW improvements
Monitoring of R99 Blocking due to…
- Air Interface TCP / RTWP,
- Channel Cards, Code Tree,
- UTRAN interface load Iub, Iur
- RNC processing load
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 13/16
Soc Classification level
13 © Nokia Siemens Networks Presentation / Author / Date
Capacity optimization
Monitoring of HSPA Blocking due to …
- Air Interface TCP / RTWP,
- Channel cards, code tree,
- Interface load Iub, Iur,
- RNC processing load
- maximum numbers of users
- non blocking situations,
-due to dynamic HSDPA Power setting
Monitoring of R99 traffic
- air interface load at TCP / RTWP (UL/DL) and at PRACH und S-CCPCH,
- channel card load, code tree occupation on different levels of SF,
- Interface load at Iub/Iur
- RNC load
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 14/16
Soc Classification level
14 © Nokia Siemens Networks Presentation / Author / Date
Capacity optimization
Monitoring of HSPA traffic
- air interface load at TCP / RTWP (UL/DL)
- channel card load, code tree occupation at SF16,
- Interface load at Iub/Iur,- RNC load
- number of user load
Cell performance (capacity)
- Throughput at cell & WBTS level,
- Throughput at RNC/NW, interface Iub/Iur level
- Service performance RT (CS, streaming)/NRT (INT&BGR) within R99/R5/6
7/28/2019 RANOP2 00 RU10 vs 2.0 Introductions
http://slidepdf.com/reader/full/ranop2-00-ru10-vs-20-introductions 15/16
Soc Classification level
15 © Nokia Siemens Networks Presentation / Author / Date
Module 5 – Paging and inter-RNC optimization
Objectives
At the end of the module you will be able to:
• Describe SRNC relocation issues
• Describe Paging Procedure & Performance