Rame Regupol Brochure

28
vibration and structural isolation construction/industrial products Technical data for Regupol ® • RAV100 • RAV200 • RAV300 • RAV400 • RAV500 • RAV600

description

vibration and structural isolation - construction/industrial products

Transcript of Rame Regupol Brochure

Page 1: Rame Regupol Brochure

vibration and structural isolationconstruction/industrial products

Technical data for Regupol®

• RAV100• RAV200

• RAV300• RAV400

• RAV500• RAV600

Page 2: Rame Regupol Brochure

2

Regupol® RAV100

Regupol® RAV200

Regupol® RAV300

Regupol® RAV400

Regupol® RAV500

Regupol® RAV600

Product range Applications Construction Building isolation Foundation isolationStructural isolationResilient seatingsFloating floorsStairs and landings

IndustrialInertia plinths Machinery mounting pads/stripsMachine foundationsMass spring systems Plant rooms General workshop machinery

General M&E plantACU’s Refrigeration equipment Pumps Lift motors GeneratorsBoilersPressesGuillotinesMilling machines

Infrastructure Rail and tunnel construction Road and bridge construction

Page 3: Rame Regupol Brochure

3

The Regupol® portfolio provides access to a range of high performing and cost effectiveanti-vibration solutions, designed to overcomeall types of vibration challenges in any industry sector.

Manufactured from polyurethane-bound rubber granulate, Regupol® products are fullyrecyclable. A wide choice of material gradesare available, including products with a loadbearing range up to and including 1.5N/mm2.

The selection of a Regupol® system will depend on a number of factors, includingload, area and natural frequency required ofthe isolation material.

With a high load bearing capacity andexcellent damping properties, Regupol®

maintains its performance over a longlifespan. It has also been independentlytested by the Institute of Structural Dynamicsat Dresden Technical University for static anddynamic behaviour.

Supplied in easy to lay rolls or individually cutpads/strips, Regupol® is quick and easy toinstall.

Regupol® is one of the leading brands for theisolation of vibration. Standard and bespokesolutions can be offered, for the most simpleand complex applications.

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

Regupol®1.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

Construction / IndustrialIsolation of structure borne noise and vibration

Page 4: Rame Regupol Brochure

4

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

RAV1001.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

1 Load Deflection

Load

range

(N/m

m2 )

Deflection (mm)Samples: 300mm x 300mm

0.050

0.040

0.030

0.020

0.010

0.000

17mm

51mm

34mm

0 1 2 3 4 5 6 7 8 9 10 11 12

RAV100

Page 5: Rame Regupol Brochure

5

Samples: 300mm x 300mm

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency (Hz)

Disturbing

freq

uency (Hz)

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

2 Vibration Isolation

RAV100Lo

ad range

(N/m

m2 )

0.050

0.045

0.040

0.035

0.030

0.025

0.020

0.015

0.010

0.005

0.000

51mm 34mm 17mm

Natural frequency (Hz)

3 Natural Frequency

RAV100

Parameter: Power transmission loss (dB), isolation factor in %

Page 6: Rame Regupol Brochure

6

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

5 Hz

static

Samples: 300mm x 300mm x 34mm

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.00.000 0.005 0.01 0.015 0.020 0.025 0.030 0.035 0.040 0.045 0.050

4 Modulus of Elasticity

RAV100

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

0.06

0.05

0.04

0.03

0.02

0.01

0.00

60

50

40

30

20

10

0

Permanent load (N/mm2)

40 Hz

5 Hz

static

Samples: 300mm x 300mm x 34mm

0.000 0.010 0.02 0.030 0.040 0.050

Dynamic stiffness (MN/m

3 )

RAV100

10 Hz

10 Hz

Page 7: Rame Regupol Brochure

7

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 4.10 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 0.30 N/mm2 Minimum

Elongation at Break DIN 53571 60 % Minimum

Tear-Resistance DIN 53515 3.0 N/mm Minimum

Static Modulus Similar Tangential modulusof Elasticity to EN 826 0.10-0.44 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 0.15-1.10 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Relative de

flection (% of thickness)

Loading time (hrs)

0.025 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep Test

RAV1008

6

4

2

0

Samples: 300mm x 300mm x 34mmFurther creep test data available upon request

Physical PropertiesRegupol® is made of polyurethane-bound rubber granulate.Thickness: 17mm*Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.05 N/mm2

* Dimpled on one side

Page 8: Rame Regupol Brochure

8

1 Load Deflection

Load

range

(N/m

m2 )

Deflection (mm)Samples: 300mm x 300mm

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

RAV2001.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

0.10

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

30mm15mm 45mm

60mm

RAV200

0 1 2 3 4 5 6 7 8

Page 9: Rame Regupol Brochure

9

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency of the system (Hz)

Disturbing

freq

uency (Hz)

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

Parameter: Power transmission loss (dB), isolation factor in %

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

2 Vibration Isolation

RAV200Lo

ad range

(N/m

m2 )

0.10

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

45mm

60mm

30mm

15mm

Natural frequency (Hz)

Samples: 300mm x 300mm

3 Natural Frequency

RAV200

Page 10: Rame Regupol Brochure

10

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 30mm

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0.00.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

4 Modulus of Elasticity

RAV200

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

0.10

0.08

0.06

0.04

0.02

0.00

100

80

60

40

20

0

Permanent load (N/mm2)

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 30mm

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

Dynamic stiffness (MN/m

3 )

RAV200

Page 11: Rame Regupol Brochure

11

Relative de

flection (% of thickness)

Loading time (hrs)

0.05 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep Test

RAV2004

3

2

1

0

Samples: 300mm x 300mm x 30mmFurther creep test data available upon request

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 4.0 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 0.40 N/mm2 Minimum

Elongation at Break DIN 53571 70 % Minimum

Tear-Resistance DIN 53515 3.40 N/mm Minimum

Mechanical Loss Factor DIN 53513 - -

Static Modulus Similar to Tangential modulusof Elasticity EN 826 0.8-0.90 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 0.6-2.20 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 15mm (other thicknesses are available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.1 N/mm2

Page 12: Rame Regupol Brochure

12

1 Load Deflection

Load

range

(N/m

m2 )

Samples: 300mm x 300mm

Deflection (mm)

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

RAV3001.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

0.10

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

50mm 100mm

RAV300

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Page 13: Rame Regupol Brochure

13

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency of the system (Hz)

Disturbing

freq

uency (Hz)

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

Parameter: Power transmission loss (dB), isolation factor in %

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

2 Vibration Isolation

RAV300Lo

ad range

(N/m

m2 )

0.10

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

100mm 50mm

Natural frequency (Hz)

Samples: 300mm x 300mm

3 Natural Frequency

RAV300

Page 14: Rame Regupol Brochure

14

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 50mm

3.5

3.0

2.5

2.0

1.5

1.0

0.5

0.00.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

4 Modulus of Elasticity

RAV300

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

0.07

0.06

0.05

0.04

0.03

0.02

0.01

0.00

70

60

50

40

30

20

10

0

Permanent load (N/mm2)

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 50mm

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

Dynamic stiffness (MN/m

3 )

RAV300

Page 15: Rame Regupol Brochure

15

Relative de

flection (% of thickness)

Loading time (hrs)

0.05 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep TestRAV300

6

5

4

3

2

1

0

Samples: 300mm x 300mm x 50mmFurther creep test data available upon request

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 5.40 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 0.33 N/mm2 Minimum (measured on a 10-cm-layer)

Elongation at Break DIN 53571 50 % Minimum (measured on a 10-cm-layer)

Tear-Resistance DIN 53515 2.30 N/mm Minimum (measured on a 10-cm-layer)

Static Modulus Similar to Tangential modulusof Elasticity EN 826 0.25-0.75 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 0.60-2.90 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 50mm Sheet dimensions: 1000mm x 500mm (strips and/or pads are available upon request)Permanent static load range: 0.1 N/mm2

Page 16: Rame Regupol Brochure

16

1 Load Deflection

Load

range

(N/m

m2 )

Deflection (mm)

Samples: 300mm x 300mm

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

RAV4001.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

0.25

0.20

0.15

0.10

0.05

0.00

15mm 30mm

45mm

60mm

0 1 2 3 4 5 6 7 8 9 10 11

RAV400

Page 17: Rame Regupol Brochure

17

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency of the system (Hz)

Disturbing

freq

uency (Hz)

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

Parameter: Power transmission loss (dB), isolation factor in %

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

2 Vibration Isolation

RAV400Lo

ad range

(N/m

m2 )

0.25

0.20

0.15

0.10

0.05

0.00

60mm

30mm

15mm

45mm

Natural frequency (Hz)

Samples: 300mm x 300mm

3 Natural Frequency

RAV400

Page 18: Rame Regupol Brochure

18

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 30mm

6

5

4

3

2

1

00.00 0.05 0.10 0.15 0.20 0.25

4 Modulus of Elasticity

RAV400

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

0.20

0.15

0.10

0.05

0.00

200

150

100

50

0

Permanent load (N/mm2)

40 Hz

10 Hz

5 Hz

static

Samples: 300mm x 300mm x 30mm

0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175 0.200 0.225 0.250

RAV400

Dynamic stiffness (MN/m

3 )

Page 19: Rame Regupol Brochure

19

Relative de

flection (% of thickness)

Loading time (hrs)

0.125 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep Test

RAV4006

5

4

3

2

1

0

Samples: 300mm x 300mm x 30mmFurther creep test data available upon request

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 4.60 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 0.65 N/mm2 Minimum

Elongation at Break DIN 53571 65 % Minimum

Tear-Resistance DIN 53515 6.0 N/mm Minimum

Static Modulus Similar to Tangential modulusof Elasticity EN 826 1.20-1.90 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 1.10-4.40 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 6mm/15mm (other thicknesses available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.25 N/mm2

Page 20: Rame Regupol Brochure

20

Load

range

(N/m

m2 )

Deflection (mm)Samples: 270mm x 270mm

Load Ranges

RAV100 RAV200/300 RAV400 RAV500 RAV600

RAV5001.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.00 1 2 3 4 5 6 7 8 9 10 11 12 13 14

1 Load DeflectionRAV500

10mm

20mm 30mm 40mm

50mm

60mm

Page 21: Rame Regupol Brochure

21

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency of the system (Hz)

Disturbing

freq

uency (Hz)

Parameter: Power transmission loss (dB), isolation factor in %

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

Load

range

(N/m

m2 )

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

10mm

20mm

30mm40mm

50mm

60mm

Natural frequency (Hz)

Samples: 270mm x 270mm

3 Natural Frequency

RAV500

2 Vibration Isolation

RAV500

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

Page 22: Rame Regupol Brochure

22

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

10 Hz

5 Hz

static

Samples: 270mm x 270mm x 20mm

16

14

12

10

8

6

4

2

00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

4 Modulus of Elasticity

RAV500

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

800

700

600

500

400

300

200

100

0

Permanent load (N/mm2)

40 Hz

10 Hz

5 Hz

static

Samples: 270mm x 270mm x 20mm

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

Dynamic stiffness (MN/m

3 )

RAV500

Page 23: Rame Regupol Brochure

23

Relative de

flection (% of thickness)

Loading time (hrs)

0.4 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep Test

RAV5004

3

2

1

0

Samples: 270mm x 270mm x 30mmFurther creep test data available upon request

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 5.90 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 0.90 N/mm2 Minimum

Elongation at Break DIN 53571 85 % Minimum

Tear-Resistance DIN 53515 8.0 N/mm Minimum

Static Modulus Similar to Tangential modulusof Elasticity EN 826 2.50-5.50 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 3.0-8.80 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 6mm/10mm (other thicknesses available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.8 N/mm2

Page 24: Rame Regupol Brochure

24

Load

range

(N/m

m2 )

Deflection (mm)Samples: 200mm x 200mm

RAV100 RAV200/300 RAV400 RAV500 RAV600

1.50

0.80

0.25

0.10

0.05

0.00

Load

range

(N/m

m2 )

1.5

1.4

1.3

1.2

1.1

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.00 1 2 3 4 5 6 7 8 9 10

10mm

20mm

30mm40mm

50mm

60mm

Load Ranges

RAV600

1 Load DeflectionRAV600

Page 25: Rame Regupol Brochure

25

200

190

180

170

160

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

Natural frequency of the system (Hz)

Disturbing

freq

uency (Hz)

-40 dB/99% -30 dB/97%

-20 dB/90%

-10 dB/69%

0 dB/0%

Parameter: Power transmission loss (dB), isolation factor in %

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

2 Vibration Isolation

RAV600Lo

ad range

(N/m

m2 )

1.5

1.4

1.3

1.2

1.1

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Samples: 200mm x 200mm

3 Natural Frequency

RAV600

10mm

20mm

30mm40mm50mm

60mm

Natural frequency (Hz)

Page 26: Rame Regupol Brochure

26

Specific load (N/mm2)

Elastic m

odulus (N

/mm

2 )

40 Hz

5 Hz

static

Samples: 200mm x 200mm x 20mm

40

35

30

25

20

15

10

5

00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5

4 Modulus of Elasticity

RAV600

10 Hz

5 Dynamic Stiffness

Dynamic stiffness (N/m

m3 )

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0

2000

1800

1600

1400

1200

1000

800

600

400

200

0

Permanent load (N/mm2)

40 Hz

10 Hz

5 Hz

static

Samples: 200mm x 200mm x 20mm

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5

Dynamic stiffness (MN/m

3 )

RAV600

Page 27: Rame Regupol Brochure

27

Relative de

flection (% of thickness)

Loading time (hrs)

0.75 N/mm2

1 10 100 1000 10000 100000

6 Long-term Creep Test

RAV6004

3

2

1

0

Samples: 200mm x 200mm x 30mmFurther creep test data available upon request

The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.

Technical InformationMeasured 30 minutes after decompression

Compression Set DIN 53572 approx. 5.0 % with 50% deformation/23˚C after 72 hrs.

Tensile Strength DIN 53571 2.20 N/mm2 Minimum

Elongation at Break DIN 53571 120 % Minimum

Tear-Resistance DIN 53515 16.0 N/mm Minimum

Static Modulus Similar Tangential modulusof Elasticity to EN 826 9.80-14.0 N/mm2 see fig. 5

Dynamic Modulus DIN 53513 4.0-18.50 N/mm2 Depending on load and frequency,of Elasticity see fig. 5

Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 10mm (other thicknesses available upon request)Roll dimensions: 8m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 1.5 N/mm2

Page 28: Rame Regupol Brochure

General M&E Plant ACU’s Refrigeration equipment Pumps Lift motors General workshop machineryGeneratorsBoilersPressesGuillotinesMilling machines

IndustrialInertia plinths Machinery mounting pads/strips Foundation isolationMass spring systemsPlant rooms

Structural engineering Isolation of steel structures Structural bearings Resilient seatingsStairs and landings

InfrastructureRoad construction Bridge constructionRail and tunnel construction

ConstructionBuiding isolationFoundation isolationStructural isolationFloating floors

Also in the RAME anti-vibration portfolio:Regufoam®

Regupol Acoustics Middle East (RAME) is the Middle East arm of market-leadingRegupol® manufacturer, BSW. Providing exclusive access to the full range of Regupol®

and Regufoam® high performance anti-vibration systems, RAME is setting the standard forvibration control in the Middle East.

From specification through to project completion, RAME has a fully trained technical team ableto provide free advice and on-site support as well as guidance during installation. This combined

product and service offering has led to Regupol® being used on a number of high profile projects,including Dubai Healthcare City and the Marina Hotel, Abu Dhabi. For further information and advice,

please contact the RAME technical sales team.

Regufoam® has been specifically developed and formulated to reduce structure bornenoise and offer high performance vibration isolation. Manufactured in various thicknessesand densities, Regufoam® materials are colour coded for ease of identification. With lownatural frequency and long term elasticity even under heavy loads, Regufoam® delivershigh performance characteristics.

Regufoam® can be used wherever structure borne noise and vibrations require effectiveisolation, including structural/civil engineering, track laying, mechanical engineering,industrial and ship building sectors.

Regupol Acoustics Middle East FZEP.O. Box 125279, Dubai, UAE

Phone: +971-4-3233493Fax: +971-4-3406295

[email protected] and BSW product portfolio certified by DIN EN ISO 9001 DIN EN ISO 14001 OHSAS 18001

Regupol® and Regufoam® are official trademarks of BSW

www.regupolacousticsmiddleeast.com