Rockland has been building land clearing rakes for over forty years. Rakes were Rockland’s very first product and they earned Rockland a world-wide reputation for outstanding quality.

From the jungles of Africa and South America to the Rocky Mountains, Rockland rakes have proven that rakes clear land faster and cheaper than dozer blades. The investment in a clearing rake returns steady dividends by increasing productivity.

Every Rockland rake is designed to perform and built to last and there is a Rockland rake for every land clearing application. Thousands of contractors around the world specify Rockland rakes because they know that when they specify Rockland, they are guaranteed dependability and performance!

RF-3 Severe Service Rake

BR Blade Rake SR Blade Rake

MA Multi-Application Rake

RAKES THE RIGHT RAKE FOR EVERY

CLEARING APPLICATION

ROCKLAND RAKES - THE STANDARD OF EXCELLENCE

ROCKLAND

RF-3 SEVERE SERVICE RAKES

Whether it’s tough jungle clearing or severe rock work, the RF-3 gets the job done. Simply put, the Rockland RF-3 is the finest rake available anywhere, from anybody, and Rockland backs it up with the exclusive Rockland lifetime guarantee. The teeth, frame and attaching brackets of the RF-3 are guaranteed for life. They will not fail.

Not only is the RF-3 tough, it is also versatile. The teeth are reversible for twice the life. When a tooth is worn, simply reverse the tooth and go back to work. Replacement tips may then be welded on the worn end when convenient. Teeth may be removed or added as requirements dictate. Two or three teeth can be put together at one end or in the center for stumping. The teeth are a cast alloy steel that is heat-treated and stress-relieved for lifetime toughness. The mainframe is built entirely of alloy steel and is designed for years of punishment. The brushguard is built of square, alloy steel tubing for years of dependable service. If you do heavy-duty clearing, the heavy-duty choice is the RF-3. Demand it!

RF-3 RAKE SPECIFICATIONS

Specifications subject to change without notice.(mm/kg)

The heavyweight champ.

Machine Category 25 30 40 50 60

Raking Width (”) Bulldozer:

Angledozer:

LGP (Bulldozer & Angledozer):

119 3023

135 3429

119 3023

135 3429

144 3658

125 3175143 3632158 4013

139 3531153 3886

139 3531153 3886

Number of Teeth 9 9 9 10 10

Tooth Clear Spacing (”) Bulldozer:

Angledozer:

LGP (Bulldozer & Angledozer):

12 30514 356

12 30514 35615 381

12 30514 35616 406

11 27912 305

11 27912 305

Tooth Penetration (”) 18 457

18 457

20 508

20 508

20 508

Height (”) 61 1549

61 1549

68 1727

68 1727

68 1727

Weight (lbs.) Bulldozer:

Angledozer:

LGP Bulldozer:

LGP Angledozer:

3600 1633

3750 1701

3970 1801

4125 1871

4165 1889

4410 2000

4340 1969

4445 2016

6080 2758

5730 2599

6640 3012

6580 2985

7930 3597

8035 3645-

-

8650 3924

8660 3928-

-

The Rockland MA Multi-Application Rake has proven itself on tough land clearing jobs all over the world. This rugged, fixed tooth rake is ideal for general land clearing as well as stacking and piling. The teeth are long enough for both digging and piling. The face of the rake and the built-in brushguard are one smooth, continuous curve for maximum rolling action when handling large amounts of brush or debris.

Rockland designed the MA to last. The tough teeth are built of certified, high-strength, heat-treated, alloy steel. The rugged frame and brushguard are built entirely of alloy steel and reinforced at all critical stress areas. Pound for pound, dollar for dollar, there is none finer—specify a Rockland MA Multi-Application rake for years of dependable service.

MA MULTI-APPLICATION RAKES

Specifications subject to change without notice.

MA RAKE SPECIFICATIONS

Proven on tough land clearing jobs.

(mm/kg)

Machine Category 10 20 25 30 40 50 60

Raking Width (”) Bulldozer: Angledozer: LGP:

80 203293 2362115 2921

90 2286104 2642120 3048

114 2896127 3226132 3353

114 2896137 3425154 3912

135 3429152 3861166 4216

140 3556158 4013

-

144 3658- -

Height (”) 54 1372 54 1372 54 1372 56 1422 60 1524 70 1778 70 1778

Number of Teeth Bulldozer: Angledozer: LGP:

677

778

778

788

889

88-

8--

Tooth Thickness (“) 1.25 32 1.5 38 1.5 38 1.5 38 2 51 2.5 64 2.5 64

Tooth Clear Spacing (”) Bulldozer: Angledozer: LGP:

14.5 36814 35617.7 449

13.3 33815.6 39615.4 391

17.3 43919.4 49217.1 434

17.3 43917.9 45520.3 516

17 43219.4 49318.5 470

17.1 43419.7 500

-

17.7 450- -

Tooth Penetration (”) 12 305 14 356 14 356 16 406 18 457 18 457 18 457

Weight (lbs.) Bulldozer: Angledozer: LGP:

980 4451095 5871275 578

1340 6081545 7011670 758

2450 11112575 11682785 1263

2450 11112620 11882700 1225

3655 16583960 17964230 1919

3800 17244280 1941

-

4040 1833--

INSTALLATION INFORMATIONThe RF-3 and MA mount in place of the standard factory attachment using standard pins. The BR and SR attach to the front of the dozer blade using brackets which are welded to the top of the moldboard.

BR BLADE RAKES AND SR BLADE RAKES

Specifications subject to change without notice.(mm/kg)

The BR Blade Rake was introduced by Rockland over twenty-five years ago. It is designed specifically for contractors who do not clear enough land to justify a full-time rake and who realize that the most efficient way to clear land is with a rake—not a dozer blade. The Rockland BR Blade rake is the solution to lower clearing costs for every contractor who has to do both dozer work and small site clearing.

Some contractors want a blade rake that is taller than the moldboard. The rugged SR Blade Rake meets those requirements exactly. It’s almost as big as an MA rake and almost as rugged. It easily pins on and is capable of providing extra protection for the front of your dozer when you need to push large piles of brush.

The Rockland BR and SR rakes have been proven from Maine to Florida and from east to west. Contractors like the way they easily pin into brackets which are welded to the top of the factory moldboard. They like the rugged teeth and they praise the tough, boxed beam mainframe. These are the reasons why most contractors specify the Rockland BR Blade Rake.

BR

SR

Machine Category 10 20 25 30 40 50

Raking Width (”) SR: 90 2286 90 2286 106 2692 120 3048 125 3175 132 3356

Overall Height (”) SR: 56 1422 59 1498 69 1752 69 1752 74 1879 90 2286

Tooth Quantity SR: 6 152 7 177 9 228 9 228 8 203 9 228

Tooth Clear Spacing (”) SR: 14.8 375 13.8 350 13.4 456 13.3 337 13.4 456 14.3 363

Tooth Thickness (”) SR: 1 25 1 25 1.5 38 1.5 38 2 51 2 51

Tooth Penetration 12 305 12 305 16 406 16 406 18 457 20 508

Weight (lbs.) SR: 980 444 1060 481 1810 821 2120 962 2770 1256 3215 1458

SEMI-U BLADE RAKEWeight (lbs.) - - 1475 670 1550 703 2775 1258 -

Rockland MA rakes and blade rakes are guaranteed against failure due to defective design, workmanship, or materials for a period of two years or 4,000 hours. The RF-3 is guaranteed for life against failure caused by defective workmanship, materials, or design as long as it is the property of the original purchaser. This warranty does not apply to any failure deemed by Rockland to be caused by wear, improper maintenance or welding.

WARRANTY

Distributed by:

ROCKLAND MANUFACTURING CO.P.O. Box 5 Bedford, PA 15522800-458-3773 www.rocklandmfg.com

RAKES0419

Printed in U.S.A.

Raking Width (in.)

# Teeth Tooth Clear Spacing (in.)

Tine Thickness (in.)

Penetration (in.)

Weight(lbs.)

10, 20 75 905 6 13-7/8 352 1 12 305 665 302

10, 20 90 2286 7 13-7/8 352 1 12 305 740 336

10, 20 105 2667 8 13-7/8 352 1 12 305 815 370

10,20 120 3048 9 13-7/8 352 1 12 305 890 404

25, 30 90 2286 7 13-5/16 340 1.5 16 406 1140 517

25, 30 105 2667 8 13-5/16 340 1.5 16 406 1250 567

25, 30 120 3048 9 13-5/16 340 1.5 16 406 1365 619

25, 30 135 3429 10 13-5/16 340 1.5 16 406 1475 669

25, 30 150 3810 11 13-5/16 340 1.5 16 406 1590 2182

40 Bulldozer 125 3175 9 13-3/8 340 2 18 457 2610 1184

40 Angle Dozer 142 3607 10 13-5/8 346 2 18 457 2990 1356

50 Bulldozer 132 3353 9 14-1/4 362 2 20 508 2730 1238

50 Angledozer 148 3759 10 14-3/8 365 2 20 508 3110 1411

BR BLADE RAKE

SR BLADE RAKE