Rafael - BSAT MP TM Satcom On The Move Manpack for … · 2019. 3. 20. ·...
2
BSAT MP Satcom On The Move Manpack for Maneuvering Forces Benefits Smallest RA Band SOTM terminal in the market Ultra light: 2.0KG (4.4 LB) Ultra low power consumption < 18W Fully Autonomous Operation on the move Modem agnostic, optional internal modem Modular, embedded or external BUC Innovative panel antenna, delivers high data rates in smallest package BSAT-MP have been specifically characterized, developed and tested to provide a Satcom response to the operational needs of tactical forces. BSAT-MP are based on breakthrough antenna panel technology and state-of-the-art control and tracking mechanism that finally allow Satcom on the move technology to be relevant for tactical forces. BSAT‘s high efficiency performance in a small and light package have made it a game changer. The panel antenna is a leap forward in capability and SWaP, enabling truly mobile/portable, full duplex, wide-band reliable satellite communications, with easy and compact installation, and significant reduction in power consumptions. The unique feature of these terminals is their capability to offer the same throughput as existing SOTM terminals but in 40% of the TM Connectivity from anywhere with everything case volume with similar savings in weight. BSAT are user-friendly terminals and can be provided with different types of embedded or external Power Amplifiers (PAs), and are modem agnostic: can be used with customer modems, or with a built-in modem.
Transcript of Rafael - BSAT MP TM Satcom On The Move Manpack for … · 2019. 3. 20. ·...
BSAT MPSatcom On The Move Manpack for Maneuvering Forces
Benefits
Smallest RA Band SOTM terminal in the market
Ultra light: 2.0KG (4.4 LB)
Ultra low power consumption < 18W
Fully Autonomous Operation on the move
Modem agnostic, optional internal modem
Modular, embedded or external BUC
Innovative panel antenna, delivers high data rates in smallest package
BSAT-MP have been specifically characterized, developed and tested to provide a Satcom response to the operational needs of tactical forces.
BSAT-MP are based on breakthrough antenna panel technology and state-of-the-art control and tracking mechanism that finally allow Satcom on the move technology to be relevant for tactical forces. BSAT‘s high efficiency performance in a small and light package have made it a game changer.
The panel antenna is a leap forward in capability and SWaP, enabling truly mobile/portable, full duplex, wide-band reliable satellite communications, with easy and compact installation, and significant reduction in power consumptions. The unique feature of these terminals is their capability to offer the same throughput as existing SOTM terminals but in 40% of the
TM
Connectivity from anywhere with everything
case volume with similar savings in weight.
BSAT are user-friendly terminals and can be provided with different types of embedded or external Power Amplifiers (PAs), and are modem agnostic: can be used with customer modems, or with a built-in modem.
UNC.59323-1217/8k/63V1 Graphic Design Dep/410
BSAT MP
Air & C4ISR Systems DivisionTel: (972)73-336-8503 Fax: (972)73-336-6267E-mail: [email protected] Tel: (972)73-335-4714 Fax: (972)73-335-4657E-mail:[email protected] www.rafael.co.il
Technical Specifications
System Parameter
GeneralMODEM Agnostic, Fully Autonomous Operation Built-in Beacon Receiver
Azimuth Coverage & Velocity 0÷360° continuous tracking speed >200°/s
Elevation Coverage & Velocity 0° to 90°, tracking speed >200°/s
Tracking Control Technique Combined IMU / RSSI / GPS
Pointing Accuracy <0.2°
Initial Acquisition Time <20 sec
Re-Acquisition Time <100ms (depends on modem)
Management ICD GUI via RS-232 / Ethernet
Power Input 12 ÷ 50VDC
Interfaces GPS, RS-232, Ethernet, TX/RX, Other
BIT Power BIT, Continuous BIT, Initiated BIT
Overall Dimensions Diameter: 195 mm, Height: 176 mm (including 2 W internal BUC)
Terminal Weight
<2.7 kg (including internal Modem & 2 W internal BUC)
<5.2 kg (including internal Modem & 2 W internal BUC & Batteries)
< 10 kg (including internal Modem & 16 W external BUC & Batteries)
Soldier Vest Weight 6 kg
Power Consumption<18W (RX only – external Modem) <43 W with internal Modem & 2W BUC
RF Parameter Ka-Band
Tx Frequency Coverage 29.0 ÷ 31.0 GHz or 27.5 ÷ 30.0 GHz
Rx Frequency Coverage 17.5 ÷ 20.0 GHz or 18.7 ÷ 21.2 GHz
Polarization RHCP/LHCP (co-pol/cross-pol)
X-POL @ beam centre - 25dB max.
Tx / Rx Isolation >60dB
Power Handling 50 W
Gain Tx 28 dBi
Gain Rx 26 dBi
G/T 1.8 dB/K
EIRP 29 dBW min ( with internal 2W)
Beam-Width AZ 4.4° , EL 8.8° (typical)
