RA 790.700.202 05 EN...pipeee de f r: feeds accurately long and heavy pipes into RA ma chines. Base...
2
RA 2, RA 8, RA 12 (AVM/MVM) Pipe Cutting and Beveling Machines Perform economical cutting and beveling with technology made by Orbitalum Tools! Advantages: • Multiple point clamping • Fast adjustment of dimensions • Regulated cutting speed • Optimal tool contact • Working direction from the inside towards the outside • Fast tool replacement Your benefits: • NEW: Extended speed range (65 - 215 rpm), ideal for the cutting of high-performance materials (Hastelloy, P91, etc.) • NEW: A new ergonomically-designed motor handle for a safer and more comfortable operating position • Square, burr-free and deformation-free pipe end • Cold machining process • Cutting in seconds • Simultaneous or seperate cutting and beveling • Increased productivity • Improved cutting quality • Increased service life of tools precision. power. simplicity. l Planetary Cutting Technology www.orbitalum.com l also available with automatic or manual feed module AVM/MVM l New motor with extended speed range NEW
Transcript of RA 790.700.202 05 EN...pipeee de f r: feeds accurately long and heavy pipes into RA ma chines. Base...
RA 2, RA 8, RA 12 (AVM/MVM)Pipe Cutting and Beveling MachinesPerform economical cutting and beveling with technology made by Orbitalum Tools!
Advantages:•Multiplepointclamping•Fastadjustmentofdimensions•Regulatedcuttingspeed•Optimaltoolcontact•Workingdirectionfromtheinsidetowardstheoutside•Fasttoolreplacement
Yourbenefits:•NEW:Extendedspeedrange(65-215rpm),idealforthecuttingofhigh-performancematerials(Hastelloy,P91,etc.)
•NEW:Anewergonomically-designedmotorhandleforasaferandmorecomfortableoperatingposition
•Square,burr-freeanddeformation-freepipeend•Coldmachiningprocess•Cuttinginseconds•Simultaneousorseperatecuttingandbeveling•Increasedproductivity• Improvedcuttingquality• Increasedservicelifeoftools
precision.power.simplicity.
l Planetary Cutting
Technology
www.orbitalum.com
l also available with automatic or manual feed module AVM/MVM
l New motor with extended speed
range
NEW
79070
020
2_05
_en
Sales Contact:Tel.+49(0)7731792-786upto-790Fax+49(0)[email protected]
Orbitalum Tools GmbH,Josef-Schuettler-Str.17,78224Singen,Germany
Repair Service: Josef-Schuettler-Str.1778224Singen,GermanyTel.+49(0)7731792-764Fax+49(0)7731792-524
Awiderangeof saw blades and bevel cutterareespeciallydesignedforourpipecuttersforhighestrequirementsandlongest
servicelife.
High-performance lubricants forpipecuttingandbevelingtoincreasethesawbladelife-time.SyntheticsawbladelubricatingcompoundGF TOP,Tube,180g:
Code790060228.Chlorine-freesawblade
lubricatingcompoundGF LUB,Tube,160ml:
Code790041016.
Specialstainless steel clamping jawsforRA2,RA21S:
Code790041323.ForRA4:Code790042201.
Aluminum clamping jaws forRA4andRA41Plus:
Code790046250.Customisedaluminum clamping
shellsforRA8,RA12,GF4,GF6,GF20,RA41Plus:fordeformation-freeclampingofthin-walledtubes.
Verysturdyandstablepipe feeder: feedsaccuratelylongandheavypipesinto
RAmachines.Base unit:
Code790068051Extensionunit:
Code790068061
Pipe Cutting and Beveling MachinesTechnical data RA 2 RA 8 (AVM/MVM) RA 12 (AVM/MVM)Dimensions(lxwxh)RA [mm] 620x350x420 778x485x430 940x592x374
[inch] 24.4x13.8x16.5 30.6x19.1x16.9 37.0x23.3x14.7Dimensions(lxwxh)RAAVM [mm] – 918x485x430 1.070x592x374
[inch] – 36.1x19.1x16.9 42.1x23.3x14.7Dimensions(lxwxh)RAMVM [mm] – 788x485x430 1.090x592x374
[inch] – 31.0x19.1x16.9 42.9x23.3x14.7MachineweightRA/RAAVM/RAMVM [kg] 45/–/– 102.5/110.0/104.6 138.6/146.1/140.7
[lbs] 99.2/–/– 225.9/242.5/230.6 305.6/322.1/310.2PowerRA/RAAVM/RAMVM [kW] 1.8/–/– 1.8/1.9/1.8 1.8/1.9/1.8
[HP] 2.41/–/– 2.41/2.54/2.41 2.41/2.54/2.41PowerAVM [kW/HP] – 0.10/0.13 0.10/0.13Protectionclass Totallyinsulatedinaccordancewithclass(RAAVM:classI,EN60204-1).Built-inelectronicspeedregulationwithspeedstabilisation
[rpm] 65-215 65-215 65-215
Versions,1phaseAC 230V,50/60Hzor120V,50/60Hz.Pneumaticdriveonlyonrequest.Vibrationlevel(DINEN28662,Part1) [m/s²] <2.5 <2.5 <2.5Soundpressurelevelattheworkplaceapprox. [dB(A)] 79 79 79
Working rangePipeOD [mm] 12-63 114-230 154-325
[inch] 0.472-2.480 4.488-9.055 6.063-12.795Wallthickness,dependsonmaterial*
[mm] 1.5-5.5 2-10 2-10[inch] 0.059-0.217 0.079-0.394 0.079-0.394
PipeIDmin.(sawblade-Ø63mm/2.480inch)
[mm] 7 137 190[inch] 0.276 5.394 7.480
PipeIDmin.(sawblade-Ø68mm/2.677inch)
[mm] 2 132 185[inch] 0.079 5.197 7.283
PipeIDmin.(sawblade-Ø80mm/3.150inch)
[mm] - 120 173[inch] - 4.724 6.811
PipeIDmin.(sawblade-Ø100mm/3.937inch)
[mm] - 100 153[inch] - 3.937 6.024
* Increased wall thickness possible with manual feed or by adding an additional cut (depending on the saw blade diameter). Depending on the wall thickness special clamping shells for thin-walled tubes are required (accessory).
The technical data are not binding. They are not warranted characteristics and are subject to change. Please consult our general conditions of supply. © Orbitalum Tools GmbH (12.2010)
