R RESIDENTIAL - philihardware.comphilihardware.com/uploads/catalog_pdf/30/30_mplpsnj.pdf ·...
Transcript of R RESIDENTIAL - philihardware.comphilihardware.com/uploads/catalog_pdf/30/30_mplpsnj.pdf ·...
1
The IP/IS SeriesInterconnected Lock is a new addition to ourcontemporary locks.They are designed to fit with ADA requirements.
New
Security Features
2
5pins tumbler cylinder
Precision cylinder construction providesexcellent operative durability and reliability.
Pre-drilled construction hole for construction keying.
Nickel plated solid brass key.
1” x 2-1/4” Mortise in deadlatch, adjustable for both 2-3/8” and 2-3/4” backset requirement.
Full 1” throw antirust stainless steel latch bolt.
¼” dia hardened steel rod insert to resist sawing and cutting.
Wrought brass orstainless steel cover.
Steel construction for long-lasting operation.
Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute.)
Twisting the latch bolt to adjust the backset.
Combination screws suitable for both wood door or metal door mounting.
Standard 1-3/4” x 2-1/4”full lip strike.
OUTSIDE COVER
CYLINDER
LATCH
CONSTRUCTION
SCREWS
STRIKE
5pins tumbler cylinder
Precision cylinder construction provides excellent operative durability and reliability
Pre-drilled construction hole for construction keying.
Nickel plated solid brass key.
Steel construction with square spindle mechanism for long lasting operation.
Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute).
Interior and exterior aligning tabs. For mounting on ø2-1/8" standard door prep.
Industrial standard1/2” throw latch bolt.
1” x 2-1/4” Mortise in latch, adjustable for both 2-3/8” and 2-3/4” backset requirement.
Solid Zinc lever.
Reversible lever design for both right-hand and left-hand door mounting.
Multiple design and finish to meet variety demands. (Please refer to page 9-10 for detail)
Wrought brass or stainless steel cover.
Combination screws suitable for both wood door or metal door mounting.
Standard 1-3/4” x 2-1/4”full lip strike with adjustable tab.
LEVER
SCREWS
STRIKE
LATCH
CYLINDER
ROSETTE
CONSTRUCTION
200B Series ANSI Grade 3 Certified Deadbolt (ANSI/BHMA A156.5-2001) for Auxiliary Lock and Associated ProductsProduct meets and exceeds ANSI Grade 3 requirements for auxiliary locks
500T Series ANSI Grade 3 Certified Leverset (ANSI/BHMA A156.2-2003) for bored & preassembled locks & latchesProduct meets and exceeds ANSI Grade 3 requirements for single-point locks and latches
US26Polish Chrome
Contemporary Design
US15Satin Nickel
US26DSatin Chrome
(Soho & Deadbolt only)
FINISHES
2-11/32"
1/2”
1-3/8"~2"
3-15/16"
AM SERIES LEVERKELLINGTONHANDLESET
SOHO SQ (SH) US15Square Rosette
SOHO RC (SH) US26Round Rosette
AUSTIN (AT)US26
HOLLYWOOD (HW)US15
KELLINGTON (KN)US15
4-1/
2”3-
1/2”
13-1
5/16
”
2-31/64”
2-3/4”
5” o
r 5-1
/2”
2-9/
16”
2”8-
27/6
4”
1”1-1/8”1-3/8”~1-3/4”
2-1/
4”
1”2-3/4”2-3/8”~2-3/4”
2-1/
4”
3
2-23/64"
1/2”
2-3/8"~2-3/4"3-15/16"
3-15/16"
2-33/64"
37/64"
1-3/8"~2"
1-3/8"~2"
2-1/4"
1"
ULLISTED
R
R
by PHILADELPHIA HARDWARE GROUP
ANSI Grade 3
NEW!
SPECIFICATIONSDoor Prep 2-1/8” cross bore, 1” edge bore.Door Fitting Handleset: 1-3/8”~1-3/4”, 2” door with thick door kit. Deadbolt/Lever 1-3/8”~2”.Cylinder KW1 standard, SC1 optional.Latch 2-3/8” and 2-3/4” adjustable. UL latch for IS/IP series.Latch Bolt Deadbolt: 1” throw. Lever: 1/2” throw.Strike 2-1/4” full lip round corner.Door Handing Handleset/Privacy Lever: handed (specify LH or RH when ordering).ADA Deadbolt Interior turn piece & Privacy Lever with Push Button. Meets 4.13.9 ADA requirements.
5-1/2” CTC INTERCONNECTED LOCK
ISUS26
IPUS26
LTRUS26
200LT DEADBOLT
LTSUS26
4
5
InterconnectedENTRANCE HANDLESETS
RICHMOND (RI)PVD
CHATEAU (CH)US10B
FAIRMONT (FT)US15
HAMPTON (HA)US12P
NEW!10
-9/3
2”16
-3/4
”
3-1/16”2-3/8” and 2-3/4”
2-13/32”
3-1/8”
4-9/64”
5-1/
2”7-
15/1
6”
Royal2-9/16”
1-3/8” ~ 2”
2-3/8” and 2-3/4”
4-7/32”
15-2
9/32
”
2-27/32”1-3/8” ~ 2”
5-1/
2”7-
15/1
6”
2-3/4”
Venezia
2-53/64”
2-9/16”Ruby
15-2
7/32
”2-27/32”
4-1/16”5-1/
2”7-
15/1
6”
2-3/8” and 2-3/4”
Hartford
2-53/64”
2-9/16”
1-3/8” ~ 2”
R
by PHILADELPHIA HARDWARE GROUP
6
VENEZIA (VA)US10B
HARTFORD (HD)US12P
LAFAYETTE (LA)US15
FASCINITE (FE)US15A
Solid Brass500TB SERIES LEVERSETS
2-7/8” 2-9/16”1-3/8” ~ 1-3/4”
2-19/32”
4-7/32”
2-9/32” 2-9/16”1-3/8” ~ 1-3/4”
2-9/32”
4-7/32”
2-31/64” 2-9/16”
1-3/8” ~ 1-3/4”
2-13/32”
4-11/64”
2-13/32” 2-9/16”1-3/8” ~ 1-3/4”
2-13/32”
4-1/16”
ANSI Grade 3
7
InterconnectedIL SERIES UL
LISTED
R
301IL-CT Charlotte (CT) Lever
US15
300IL-SD San Diego (SD) Lever
US15
300IL-RY Royal (RY) Lever
US15
Mounting without Exterior Escutcheon Plate
3-5/16”
4-43/64” 4-39/64”
4”
3-5/16”
7-15
/16”
1-3/8” ~ 1-3/4”1-5/8” ~ 2”
4”
301IZ-CT-US15 Charlotte (CT) Lever
R
by PHILADELPHIA HARDWARE GROUP
8
ANSI Grade 2IZ SERIES UL
LISTED
R
301IZ-CT-US15 Charlotte (CT) Lever
27/64” 11/32”
7/16” 23/64”
301IZ-CT Charlotte (CT) Lever
US15
301IZ-SD-US15 San Diego (SD) Lever
NEW!
INTERIOR APPLICATION
South Bay Escort
2-3/8”2-3/4”
2-9/16”
2-61/64”
1-3/8” ~ 1-3/4”45/64”1-5/64”
5-1/
2’”
1-57
/64”
9-19
/32”
2-9/16”2-41/64”
2-53-64”
17/32”
4-9/64”
9
Handlesets & Levers400 SERIES HANDLESETS
500T SERIES LOCKSETS
MAYFAIR (MA)US10B
IMPERIAL (IM)US15
KELLINGTON (KN)US12P
SHELBY (SY)US12P
ROYAL (RY)US10B
MANHATTAN (MH)US5
PALMER (PA)US26
ESCORT (ET)US3
R
by PHILADELPHIA HARDWARE GROUP
10
ANSI Grade 3Lever Design500T SERIES LOCKSETS
Knob Design100T SERIES LOCKSETS
OLYMPUS (OS)US10B
RUBY (RB)US12P
GUARDIAN (GN)US32D
BALA (BA)US32D
300TUS32D
COMBOSET300T Series
US3
ESCUTCHEON PLATE5” CENTER TO CENTER
CAMBER (CM)US15
NEW!
JURAN (JU)US15A
Deadbolt200B SERIES
ONE SIDED (Full Bore)US32D
SINGLE CYLINDERUS3
ONE SIDED (Half Bore)US32D
DOUBLE CYLINDERUS3
11
US3Passage
US15Passage
US15Privacy
US15Privacy
DOOR LOCKSPECIFICATIONSDoor Prep 2-1/4” H x 1-3/4” W notch.Door Fitting 1-3/8” ~ 1-3/4” door thick.Exposed Trim Brass, stainless steel, or zinc alloy.Strike 1” x 2-1/4” rectangular.
2-3/
4”
2-1/4”
Sliding
FINISHES
PVDLifetime
US5Antique Brass
US10BOil Rubbed Bronze
US12PTuscany Bronze
US15Satin Nickel
US15APewter
US26Polish Chrome
US3Polish Brass
Not all styles available in all finishes. See finish chart on page 12 for details.
Fits 2-1/8” cross bore 2-3/8” fixed
backset latch
NEW!
CHATEAUFAIRMONTHAMPTONRICHMONDFASCINITEHARTFORDLAFAYETTEVENEZIA
IMPERIALKELLINGTONMAYFAIRCAMBERESCORTJURANMANHATTANPALMER ROYALSHELBY
DEADBOLTBALAGUARDIANOLYMPUSRUBY
AUSTINHOLLYWOODSOHO
DEADBOLTDEADBOLT
(CH)(FT)(HA)(RI)(FE)(HD)(LA)(VA)
(IM)(KN)(MA)(CM)(ET)(JU)(MH)(PA)(RY)(SY)
(BA)(GN)(OS)(RB)
(AT)(HW)(SH)
400Interconnected
500TBSolid Brass
4002PC Type
500T
300IL 4”CTC300IZ 5-1/2CTC200B100T
300T/310T Combo
500AMContemporary
301IP 5-1/2” CTC301IS 5-1/2” CTC200TS200TR
SERIES ITEM Abbrev PVD US3 US5 US10B US12P US15 US15A US26 US26D US32D505 605 609 613 619 620 625 626 630
Product avaialble in stock. Please refer to price book for details. Other finishes may be available upon request. Please allow longer lead time, min. 300 lock order.
Interconnected Handleset and Solid Brass Levers
Handleset, Interconnected Lock, Levers, Knob, Deadbolt and Combo Pack
Contemporary Interconnected Lock, Levers and Deadbolt
R
by PHILADELPHIA HARDWARE GROUP
12
FinishAVAILABILITY
Accessories
Keys
Lock Strikes9101 91039102
1-1/8” x 2-3/4”“T” type with tab
1-3/4” x 2-1/4”Full lip with tab square corner
1-3/4” x 2-1/4”Full lip with tab1/4” radius round corner
9108
1-3/4” full round with tab for tubular type drive-in latch
9125
1-1/4” x 2-3/4”“T” type adjustable
Deadbolt Strikes9111 9112 9113
1-1/8” x 2-3/4” Rectangular square corner
1” x 2-1/4”Rectangular square corner
1” x 2-1/4”Rectangular1/4” radius round corner
9117
1-3/4” x 2-1/4”Full lip1/4” radius round corner
9119
1-1/4” x 3-5/8”Security strike1/4” radius round corner
KW1 5-Pins SC1 5-Pins SC4 6-Pins 9301-KKW1
9301-SSC1 & SC4TE5 HK6 SC6SC5HK5
13
AccessoriesDead Latches for 100T EntranceOptional: 9071 square corner
Spring Latches for400 Handleset (MA/IM/CA/KN)Optional: 9080 square corner 9080UL UL square corner 9080RUL UL round corner
Dead Latches for500TB EntranceOptional: 9050 square corner 9050UL UL square corner 9050RUL UL round corner
Spring Latches for400 Interconnected Handleset (RI/CH/HA/FT), 501TB, 502TB, and400 Handleset (MA/IM/KN) with Solid Brass lever(VA/HD/FE/LA)Optional: 9079 square corner 9079UL UL square corner 9079RUL UL round corner
Dead Latches for500TZ EntranceOptional: 9045 square corner
Latches for 200BOptional: 9091 square corner 9091UL UL square corner 9092UL UL round corner
Mortise Dead Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9073
Drive-in Dead Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Dead latch drive-in cap for converting mortise latch to Drive-in Latch
9075
Mortise Dead Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9045R
Drive-in Dead Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Dead latch drive-in cap for converting mortise latch to Drive-in Latch
9045C
Mortise Dead Latch (Brass Bolt)2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9050R
Drive-in Dead Latch (Brass Bolt)2-3/8” or 2-3/4” adjustable backset1” Diameter
9050C
Mortise Spring Latch (Brass Bolt)2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9079R
Drive-in Spring Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
Parts
97824-way plate is available for converting drive-in latch to 1” x 2-1/4” square mortise latch.
9079C
Mortise Deadbolt Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9092
Drive-in Deadbolt Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Deadbolt latch drive-in cap for con-verting mortise latch to Drive-in Latch
9093
Mortise Spring Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9080R
Drive-in Spring Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
9080C
D904D909
Spring Latches for101T, 102T, 501TZ, 502TZOptional: 9072 square corner
Mortise Spring Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
9074
Drive-in Spring Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
9076
D907
D924
D927
Spring Latches forAM Series (SH/HW/AT)Optional: G90A3T square corner
Mortise Spring Latch2-3/8” or 2-3/4” adjustable backset1” x 2-1/4” Round Corner Faceplate
G90A3R
Drive-in Spring Latch2-3/8” or 2-3/4” adjustable backset1” Diameter
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
G90A3C
D927
R
by PHILADELPHIA HARDWARE GROUP
14
Functions
300 304
400
500T
100T
500TP
502TP
501T
101T
502T
102T
515T
115T
410
405
400 Series Handleset – ANSI A156.2, Series 4000, Grade 3400 Single Cylinder Handleset Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever.
400 Single Cylinder Interconnected Handleset (ANSI F102) Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever. Both deadbolt and latch bolt are retracted to unlocked position by operating inside lever.
410 Double Cylinder Handleset Deadbolt thrown or retracted by key from either side. Latch retracted by thumbpiece from outside or by inside knob/lever.
405 Dummy Handleset For use as door pull or as dummy trim on inactive leaf of double door. Fixed thumbpiece and inside knob/lever. Dummy cylinder with inside plate.
500T Series Lever Lock – ANSI A156.2, Series 4000, Grade 3500T Entrance Turn button lock/unlock outside lever. Key lock/unlock from outside.
500TP Entrance (Push Button) Push inside button locks outside lever. Key lock/unlock from outside. Unlock by push down inside lever.
501T Passage Both levers always unlocked.
502T Privacy Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism.
502TP Privacy (Push Button) Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism. Unlock by push down inside lever.
515T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim.
100T Series Knob Lock – ANSI A156.2, Series 4000, Grade 3100T Entrance Turn button lock/unlock outside knob. Key lock/unlock from outside.
101T Passage Both knobs always unlocked.
102T Privacy Turn inside button locks outside knob. Can be opened from outside using outside turn mechanism.
115T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim.
200 Series Deadbolt Lock – ANSI A156.36, Grade 3200 Single Cylinder Deadbolt thrown or retracted by key from outside or by inside turnpiece.
210 Double Cylinder Deadbolt thrown or retracted by key from either side.
205 One-sided Half-Bore Deadbolt thrown or retracted by thumbpiece from inside.
206 One-sided Full-Bore Deadbolt thrown or retracted by thumbpiece from inside. Cover plate outside.
300 Series Interconnected Locks – ANSI A156.12, Grade 3301 Entrance Single Locking, ANSI F95 Latch bolt operated by lever from either side. Deadbolt operated by turn from inside or key from outside. Operating inside lever retracted both deadbolt and latch bolt.
300 Entrance Double Locking, ANSI F97 Deadbolt operated by key from outside or by turnpiece inside. Deadlatch is locked by key from outside or by push button from inside. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
304 Storeroom Double Locking, ANSI F98 Deadbolt operated by key from outside or by turnpiece inside. Outside lever is fixed, entrance by key only. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
200
210
205
206
301
500TP/502TPPush Button
available
Copyright ©2015 Philadelphia Hardware Group Inc. All rights reserved.
Philadelphia Hardware Group Inc.
DISTRIBUTION BY:
SAN DIEGO DISTRIBUTION CENTER (Home Office)6590 Top Gun Street San Diego, CA 92121Tel: (858) 642-0450 Fax: (858) 642-0454Toll Free Tel: 1-800-545-2309 Toll Free Fax: 1-800-828-0988www.philihardware.com
CHICAGO DISTRIBUTION CENTER3687 Darlene Court Aurora, IL 60504Toll Free Tel: 1-800-545-2309
ATLANTA DISTRIBUTION CENTER2319 Defoor Hills Road N.W. Atlanta, GA 30318Toll Free Tel: 1-800-545-2309