R A C ING CA R BED SID E - Happy Beds
4
IMPORTANT KEEP FOR FUTURE REFERENCE & READ CAREFULLY INSTRUCTIONS RACING CAR BEDSIDE Important to read before assembly: Please check the contents of the box before aempng to assemble this product. The instrucons will have a checklist of parts and fings. Only adults should assemble this product. Assemble the product as close to its intended final locaon/room as possible. Do NOT use any power tools as this may damage the frame. You may require an assistant when liſting, as this product or some parts of this product may be heavy Please keep small parts out of reach of children. The back page also details some more informaon on safety, care and maintenance.
Transcript of R A C ING CA R BED SID E - Happy Beds
I M P O R TA N TK E E P F O R F U T U R E R E F E R E N C E & R E A D C A R E F U L LY
I N S T R U C T I O N S
R A C I N G C A RB E D S I D E
Important to read before assembly:Please check the contents of the box before attempting to assemble this product. The instructions will have a checklist of parts and fittings.Only adults should assemble this product.Assemble the product as close to its intended final location/room as possible.Do NOT use any power tools as this may damage the frame.You may require an assistant when lifting, as this product or some parts of this product may be heavyPlease keep small parts out of reach of children.
The back page also details some more information on safety, care and maintenance.
2.1.
3. 4.
5. 6.
7. 8.
2
PARTS LIST
1. Back Panel3. Top Panel5. Base panel7.
2. Side Panel4. Front Panel6. T-Bar locks8.
PARTS LIST
x 1
x 1 x 1
x 2
x 2x 1
3
The bedside is now complete, please read the user guide notes to maintain the unit to its highest standard.
A. Take the back panel (1) and slot in the side panels (2).B. Slot the base panel (5) into the side panels (2). Then put in the T-Bar (6)into the slot at the back on the base panel (5).C. Place on the front panel (4) to the 2 sides (2).D. Slot the top panel (3) into the side panels (2). Then put in the T-Bar (6)into the slot at the back on the top panel (5).
A B
C D
(4)
(5)
(3)
(1)
(5)
(6)
(6)
(2)
(2)
(4)
(3)
4www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
▪ Wipe clean with a slightly damp cloth.▪ Avoid the use of all household cleaners and abrasives.▪ Periodically check all screw & fixings to ensure they are secure.▪ When moving your product, carefully lift into place. Never drag or push the pieces across the floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that you have problems putting it together or have damaged or missing pieces, please contact us by visiting:https://www.happybeds.co.uk/customer-service
Please keep these instructions for future reference.
Notes
User GuidePlease take a little time to read the important safety notes detailed below. This will ensure many years of happy and safe use.
Safety▪ Keep this product away from fire and direct heat sources.▪ Only use spares approved by Happy Beds.▪ Always clear and empty the product before dismantling.▪ Do not use this bed if any part is broken, torn or missing.▪ Do not use this product unless all fixings are secured.▪ Always use on a level, even surface.▪ Only adults should assemble this product.
