QX3440 Multiservice PDH TDM multiplexer DACS (En) · Dual controller cards support single SNCP ring...
Transcript of QX3440 Multiservice PDH TDM multiplexer DACS (En) · Dual controller cards support single SNCP ring...
TDM SDH & PDH DACS Vers ion 1 .5– Nov14
Features
• SDH ADM (Add and Drop Multi-
plexer) and TM (Terminal Multi-
plexer) up to 4 STM1/4 with full
VC11/VC12/VC4 cross connect
• PDH DACS (Digital Access Cross-
connect System) with full DS0
non blocking cross-connect with
up to 252E1 or 336T1
• Up to 64E1 or 36E1 tributaries
ports
• Full modular system:
- 2 slots controller CPU with SDH
and DS0 cross-connect and 2
STM1/4 slots each controler,
- 2 slots power supplies ,
- 4 mini slots
- 12 for 5U or 3 slots for 3U
• Redundant CPU, power, E1 with
hot swappable cards.
SDH Protection for
STM1/STM4 or OC3/OC12:
• MSP 1+1 with one or 2 CPU
• SNCP with one CPU
• SNCP and MSP (1+1) with 2 CPU
E1/T1 Protection:
• 1+1 with adjacent card
• PDH ULSR E1 ring
• PDH SNCP 64K ring
• Circuit protection
with external Y-Box
Redundancy :
• Dual CPU & cross-connect
• Dual power supply
Administration :
• Craft interface, Ethernet port and
in-band over TDM DS0.and SDH
EOC
• Over VT100 menu in Telnet or
SSH,
• In SNMP with CXRview GUI or the
NMS with full automatic commis-
sioning CXR-iNMS
HX9550R HIGH DENSITY
SDH AND DACS MULTIPLEXER
ACCESS SDH& PDH MUX CROSS CONNECT
HX9550R-3U
The HX9550 SDH/SONET/PDH is a Multi-Service Access Platform with:
• High density TDM/PDH multiplexer DACS supporting voice, async and sync data,
industrial copper and optical interfaces, G.SHDSL extension, dry contact and
Ethernet EoPDH bridges/router interfaces
• An economical STM-1/4 (OC-3/12) access ADH ADM/TM multiplexer with full
cross-connect with SDH link and local TDM/PDH interfaces
• TDMoE encapsulation and L2 GE switch card to transport TDM PseudoWire cir-
cuits over GE WAN together with local LAN
This equipment is a combined equipment of the QX3440 DACS with same features
and interfaces but in addition a large cross-connect DS0/E1/T1 to 4 STM1 or STM4
interfaces.
The HX9550R series is particularly designed for the utilities (power companies, oil
and gaz ), transportation , chemical industries to concentrate and to distribute mix
flow of analogue/voice , low rate async / sync, contacts … interfaces and Ethernet
over STM1/4 optical link..
HX9550R-5U
Page 2 Vers ion 1 .5– Nov14 ORDERING INFORMATION
Chassis and cards Description Notes
HX9550R-5U 5U 19’’ Main unit chassis without CPU, power, E1/T1 card, 128 Mbps tributaries Deliver with rack mount 19’’ and 23’’
HX9550R-3U 3U 19’’ Main unit chassis without CPU, power, E1/T1 card, 72 Mbps tributaries Deliver with rack mount 19’’ and 23’’
HX9550R-CPU-CC4-E1 CPU card with SDH VC4/VC12/VC11 and DS0 cross-connect, 2 slots for STM1/
STM1 (OC3/OC12) SFP
Single controller card support MSP 1+1 or SNCP ring
Dual controller cards support single SNCP ring and MSP 1+1
2 for redundancy
HX9550R-SW-4E1-RING E1 ring software 4E1 or 4FOM Software Option
HX9550R-E1 1 channel E1 interface, G703/G704/CAS
Mini slot
4 Mini
slots
available
HX9550R-T1 1 channel T1 interface, G703/G704/CAS
HX9550R-MQE1-aa 4 channel E1 interface, G703/G704/CAS connector DB25, support ULSR-RING aa=75 delivered with cable 75ohms 8 BNC aa=120 with
cable 120 RJ45M
HX9550R-4E1FO-MM 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Multi-Mode 2 km
HX9550R-4E1FO-SMxx 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Single Mode 20, 50, 100, 120 km
HX9550R-RTA Bridge/Router interface: 2 Ethernet ,64 WAN, maxi throughput 4Mbps 2 x 10/100BaseT
HX9550-QFXO 4-channel FXO plug in module, w/600/900 impedance, Battery Reverse
HX9550-QFXS 4-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR
HX9550-2QEM-xx 4 channel 2W E&M plug in module
HX9550-4QEM-xx 4 channel 4W E&M plug in module
HX9550R-4E1-aa 4 channel E1 interface, G703/G704/CAS (support ULSR-RING with option) aa= 75ohms (2 BNC) or 120ohms (RJ45)
1 slot
Module
12
slots
available
HX9550R-3E1-aa 3 channel E1 interface, G703/G704/CAS support PDH-SNCP 64Kbps -RING aa= 75ohms (2 BNC) or 120ohms (RJ45)
HX9550R-4T1 4 channel T1 interface, , G703/G704/CAS
HX9550R-8G703-64K 8 channel G703 interface at 64K data rate (J64)
HX9550R-4GSH 4 channel GSHDSL modem 2 wires Remote modem MD42xx/MD44xx SH33xx and
CopperLAN in 2 wire HX9550R-2GSH 2 channel GHDSL modem 2 or 4 wires
HX9550R-8E&M 8 channel 2W/4W E&M plug in module
HX9550R-12FXS 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR Without Ground start and metering pulse.
HX9550R-12FXO 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse
HX9550R-12FXS-M 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR With metering pulse.
HX9550R-12FXO-M 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse
HX9550R-SW8RT Bridge/Router with switch 8 ports 10/100BaseT switch ,64 WAN Maxi throughput 8Mbps
HX9550R-TOR-8I8O 8 channels Input and 8 channels output of Dry Relay contact
HX9550R-8RS232-A 8 RS232 RJ45F Interface asynchronous HX9550R
HX9550R-8RS232-A4S 8 RS232 (2 RJ45+ 2 DB44F) asynchronous and 4 synchronous for HX9550R Include 2 cables DB44M to 2 DB25F+ 1DB9F
HX9550R-8RS485 8 RS485/RS422 RJ45 asynchronous over sync oversampling
HX9550-8RS485-TS-BUS 8 RS232/RS422/RS485 asynchronous (200-300-600-1.2k-2.4-4.8-9.6-38,4-57,6-
115,2-128k) per oversampling DCE., Terminal server and Omnibus function.
HX9550R-BR-8RS232-RJ Bridge card with 8 RS232 RJ45F Interface asynchronous HX9550R
HX9550R-TDMoE 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 10-7 For transport of payload. Support G.823 Traffic
HX9550R-TDMoE-S 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 16 x 10-9 For transport of payload and synchronization.
Support G.823 Traffic and Synchronization
HX9550R-6X21-DB25 6-channel X21/V11, n 64k, w/ DB15 adaptor
2 slots
Module
HX9550R-6V36-DB25 6-channel V36/RS422/RS485/X21-V11/V36, n 64k, w/ DB25 connector
HX9550R-24MAG-xx 24-channel Magneto plug in xx = 1G = L1 GND; 12 = L1 L2
HX9550R-24FXS 24-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR, w/
o Ground start and metering pulse.
Telco 50 points
HX9550R-24FXO 24-channel FXO plug in module, w/600/900 impedance, Battery Reverse, w/o
Ground start and metering pulse.
HX9550R-PW150 Power supply module -36 to -72V 150 Watt for HX9550R only Order 2 single DC for Dual DC application
HX9550R-PW150-24 Power supply module -12 to -36V 150 Watt for HX9550R only * no support FXS
HX9550R-S-PW48 Power supply module -36 to -72V 100 Watt for HX9550R-S only Order 2 single DC for Dual DC application
HX9550R-S-PWAC Power supply module AC 110/230V 150 Watt for HX9550R-S only Only ONE AC power supply
HX9550R-FAN 2 fan chassis 1 U Power supplied by QX chassis
999-355-031 V.35 DB25 to M34F DTE Cable
999-355-030 V.35 DB25 to M34M DCE Cable
PW-230AC-48-150-xx Power supply 230Vca to -48Vcc 150W Xx= Eur/UK/USA
PROTEC-4E1 1 for 1 protection Y-Box with RJ48C connectors (4E1)
PROTEC-16E1 1 for 1 protection Y-Box with RJ48C connectors (16E1)
Configuration > 2 STM-1/4 (OC-3/12) aggregate lines per CC4 card > 4 STM-1/4 (OC-3/12) with 2 CC4 per chassis > Use STP-STM1/4-MM or SMxx or CWDM or DWDM with DDM
SDH capabilities: > Per chassis single STM-1/4 (OC-3/12) optical ring uplinks > One MSP (1+1) or SNCP for single controllers > Two MSP(1+1) or one MSP (1+1) and SNCP for dual controllers > Aggregate lines that are software configurable > SDH Cross-connect VC11/VC12/VC4 > Non-blocking cross-connect DS0= n 64 Kbps for 252E1 + 64E1 or 336T1 + 52T1 to for data and voice channel transmission for uplink site
System Clock > SSM and CLK hold over function (SDH/SONET and E1/T1) > Clock Source Internal clock, 4 aggregate lines clocks (STM-1/4 (OC-3/12)) > External clocks: 2.048MHz or 2.048Mbps for STM-1/4, 1.544M bps for OC-3/12
SDH/SONET Line Alarm SDH Line PI-LOS RS-LOF RS-TIM MS-SD MS-SF MS-AIS MS-RDI MS-REI B1-BIP B2-BIP SDH Ho-Path AU-LOP AU-AIS HP-SD HP-SF HP-UNEQ HP-PLM HP-TIM HP-RED-P HP-RDI-S HP-RDI-C HP-LOM HP-REI SDH Lo-Path TU-LOP TU-AIS LP-SD LP-SF LP-UNEQ LP-PLM LP-TIM LP-RDI-P LP-RDI-S LP-RDI-C LP-REI LP-BIP SONET Line LOS-PI, LOF-S, TIM-S, SD-L , SF-L ,AIS-L , RDI-L , REI-L UAS, B1-BIP, B2-BIP SONET STS-Path LOP-P, AIS-P, SD-P, SF-P, UNEQ-P, PLM-P, TIM-P, RDI-P-P, RDI-S-P, RDI-C-P, RDI-P-P, LOM-P, REI-P, B3-BIP-P SONET VT-Path LOP-V, AIS-V, SD-V, SF-V, UNEQ-V, PLM-V, TIM-V, RDI-P-V, RDI-S-V, RDI-C-V, REI-V, BIP-V Contains up to 300 alarm records of latest alarm types, alarm severity, date, and time.
Page 3 Vers ion 1 .5– Nov14
HX9550R SDH SPECIFICATION
STM-1/4 or OC-3/12
STM-1/4 or OC-3/12
64E1 or 52T1 drops in
maximum
64E1 or 52T1 drops in
maximum 64E1 or 52T1 drops in
maximum
HX9550-A HX9550-A HX9550-A
STM-1/4 or OC-3/12
STM-1/4 or OC-3/12
MSP 1+1
MSP 1+1
Network Line Interface - E1, MQE1, 4E1 and 3E1 card
E1, MQE1, 4E1 & 3E1 cards support 1+1 protection
4E1, MQE1 and FO 4E1 cards support PDH ULSR protection
3E1 and future FO-3E1 support PDH SNCP 64K protection.
Network Line Interface - T1 and 4T1
Fiber Optical Interface
Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704
Line Code AMI or HDB3 Connector BNC/RJ48C
Input Signal ITU G.703 to -10dB Electrical 75 ohm Coax/120 ohm twisted pair
Output Signal ITU G.703 Jitter ITU G.823
Line Rate 1.544 Mbps ± 50 bps Output Signal DSX1
Line Code AMI or B8ZS Framing D4/ESF (selectable)
Input Signal ABAM cable length up to 655 feet Connector RJ48C
4 E1 or 4 T1
Source
Wavelength
Power
Receiver Sensivity
Data Rate
Status report
Management
System gain
Line code
Detector type
Fiber type
Connector
G703, G704, CAS or Non CAS
LED or MLM Laser
Multimode 1310
Singlemode 1310 +/- 50 nm; 1550 +/- 40 nm
-26 or –8 dBm
-38 dBm at BER < 10 –10
8 Mbps (4*2Mbps)
Card type, loopback, LOS
Remote management via EOC channel
30 dB
Scrambled NRZ
PIN-FET
SC/PC or FC/PC
Protection PDH ULSR optical ring
Page 4 Vers ion 1 .5– Nov14
HX9550R E1, 3 AND 4 E1/T1 CARD SPECIFICATIONS
HX9550R-4E1FO-MM 4 E1 Fibre Optic dual fibre MM 1310 13dBm for 2km, mini slot , SC/PC
HX9550R-4E1FO-SM30-SC 4 E1 Fibre Optic dual fibre SM 1310 20dBm for 30km, mini slot , SC/PC
HX9550R-4E1FO-SM50-SC 4 E1 Fibre Optic dual fibre SM 1310 30dBm for 50km, mini slot , SC/PC
HX9550R-4E1FO-SM30-FC 4 E1 Fibre Optic dual fibre SM 1310 20dBm for 30km, mini slot, FC/PC
HX9550R-4E1FO-SM20/15 4 E1 Fibre Optic dual fibre SM 1550 12dBm for 20km, mini slot , SC/PC
HX9550R-4E1FO-SM100 4 E1 Fibre Optic dual fibre SM 1550 40dBm for 100km, mini slot ,SC/PC
HX9550R-4E1FO-SM30W13 4 E1 Fibre Optic single fibre SM 1310 WDM 20dBm for 30km, mini slot, please use face to a HX9550R-4E1FO-SM30-W15, SC/PC
HX9550R-4E1FO-SM30W15 4 E1 Fibre Optic single fibre SM 1550 WDM 20dBm for 30km, mini slot , please use face to a HX9550R-4E1FO-SM30-W15, SC/PC
Co-directional Interface
Interface ITU G.703 64 Kbps co-directional interface
Connector 120ohm, RJ48
Line Distance Up to 500 meters
Loopack DTE Payload Loopback, Local Loopback
C37.94 Interface
Source LED
Wavelength 820nm 2Km reach
Connector ST/PC
Optical Budget 50 µ core/9.6 db; 62.5 µ core/ 15db
G.SHDSL Line Interface
> Up to twelve 4-port G.SHDSL cards. > Up to six cards with line power option, as the line power cards use two plug-in slots. > Full duplex with adaptive echo cancellation GSHDSL line coding. > Unconditioned 19-26 AWG twisted pair. > Line rate: 272, 400, 528, 784, 1168, 1552, 2064 for data rates n x 64 Kbps. Compatible with CopperLAN, MD42xx and SH3312 in 2 wire mode and SH3314 in 4 wire mode
DTE Interface (V.35)
DTE Interface (V.36)
DTE Interface (X21)
DTE Interface (RS232-X.50 mux.), 8 ports card asynchronous HX9550R-8RS232-A
> Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux
> Modes Asynchronous, Asynchronous in Mux X50 mode, Sync Oversampling
> Connector 8 RJ45
DTE Interface (RS232-X.50 mux.), 8 ports card: 8 asynchronous and 4 synchronous HX9550R-8RS232-A4S
> Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux
> Connector 2 RJ45 + 2 DB44F with 2 cable DB44M to 2 DB25F and 1 DB9F
DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485
> Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards
> Connector 8 RJ45
DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485-TS-BUS
> Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards
> Connector 8 RJ45
> Asynchrous mode (200-300-600-1.2k-2.4-4.8-9.6-38,4-57,6-115,2-128k) par oversampling DCE en RJ45 pour HX9550,
> Terminal server founction
> Omnibus, supports DNP3 and Modbus protocols
DTE Interface (Data Bridge Card) 8 ports RS232 asynchronous Multipoint
> Data Port Up to twelve 8-port data bridge card (each card supports up to 120 DS0 for data bridge)
> Feature 20 end points per multi-drop circuit to into a logical ended 56K or 64K channel
Per port supports bridge function to N remote Trib. Site (N=1~20)
> Data Rate Asynchronous, supports 1200 to 19200 bps asynchronous data via oversampling channel
Bridge function one port with one DS-0 to many (Maximum is 20 for remote Tributary data box )
20 drops for each DS0 to remote Tributary data box and 8 ports RS232 shared the 128 channels.
Dry Contact interface card: 2 versions HX9550R-TOR-8I-8O and HX9550R-TOR-8I-8O-HV
Dry Contact Outputs 8 pairs per card with screw
Insulation resistance 100M ohms.
Support Normal Closed/Open,
Max Current 5A, maxi voltage 100Vdc or 250Vac (HX9550R-TOR-8I-8O version)
Max Current 2A, maxi voltage 220Vdc or 250Vac (HX9550R-TOR-8I-8O-HV version)
Dry Contact mode: IP-Mode Collect data and send alarm to console ou TRAP to SNMP/CXRview over CPU
IP-Mode Received order from console or SNMP/CXRview over CPU
TDM-Mode transmit dry contact change over E1. Use 1 TS for 1 port or 4 contacts
Dry Contact Inputs 8 pairs per card : 2 port of 4 pairs , 2 RJ45
Internal resistance: Standard version 1K and -HV version 100K
3mA for current activation, 1,5mA for current deactivation, maxi 4mA
> Data Port Up to six 6-port DTE V.35 cards or 1 port
> Data Rate n x 64 Kbps
> Connector DB25F (optional conversion cable DB25S to M34 connector)
> Data Port Up to six 6-port DTE V36 cards or 1 port > Data Rate n x 64 Kbps, support asynchronous with over sampling > Connector DB25F (optional conversion cable DB25S to M34 connector)
> Data Port Up to six 6-port DTE X21/V11 cards or 1 port > Data Rate n x 64 Kbps
> Connector DB15F
Page 5 Vers ion 1 .5– Nov14
HX9550R SERIAL INTERFACES - PRODUCT SPECIFICATIONS
Page 6 Vers ion 1 .5– Nov14
HX9550R VOICE INTERFACES - PRODUCT SPECIFICATIONS
Voice Card (8 E&M and 4&M for HX9550RS only)
Voice Card (12 FXS, 12 FXO, 24 FXS, 24 FXO, QFXS, QFXO)
Connector RJ11, Telco50 for 24 ports
Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF
Encoding A-law or µ-law, user selectable together for all
Impedance Balanced 600 or 900 ohms (selectable together for all)
Longitudinal Rejection 55 dB
Longitudinal Max 2.5 volts peak AC
Loss Adjustment 7 to -16 dB / 0.5 step transmit & receive
Signal/ Distortion > 46dB with 1004 Hz, 0dBm input
Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz
FXS Loop Feed Nominal - 48Vdc with 10mA current limit
FXO Ringing REN 0.1B (AC)
FXS Ringing 1REN at 5K meters per port
16.5Hz, 20Hz, 25Hz, 50Hz, user selectable for all
86 v rms (sine wave), 2 sec on 4 sec off, or 1 sec on 2 sec off optional for PLAR
Signaling Metering pulse 12KHz, 16KHz, Metering level 0dBm, -24dBm
Signaling Bit Programable
All in-band signaling tones are carried transparently by the digitizing process. All in-band signaling tones are carried transparently
by the digitizing process.
Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.
Connector RJ45 connector
Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF
Encoding A-law or µ-law, user selectable together for all
Impedance Balanced 600 or 900 ohms
Longitudinal Rejection 55 dB
Longitudinal Max 2.5 volts peak AC
Loss Adjustment 0, 3, 6, or 9 dB transmit & receive
Gain Adjustment 7 to -16 dB transmit & receive
Signal/Distortion > 46dB with 1004 Hz, 0dBm input
Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz
Signaling Type 1, Type 2, Type 3, Type 4, and Type 5, A side and B side
All in-band signaling tones are carried transparently by the digitizing process.
Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.
E&M Signaling bits
NOTE: * = Don't care.
E&M
M - Tx E - Rx
A B C D A B C D
Normal IDLE - ON HOOK 0 0 0 1 0 0 * *
ACTIVE - OFF HOOK 1 1 0 1 1 1 * *
A-Bit Invert IDLE - ON HOOK 1 1 0 1 1 1 * *
ACTIVE - OFF HOOK 0 0 0 1 0 0 * *
Signaling bits FXS/FXO
NOTE 1: * = Don’t care.
NOTE 2: INVERT means the 0
&1 of the A-Bit are inverted.
FXS FXO
Tx Rx Tx Rx
PLAR OFF/ON PLAR OFF PLAR ON
A B C D A B C D A B C D A B C D A B C D
Normal ON HOOK 0 1 0 1 0 * * *
OFF HOOK 1 1 0 1 1 1 * *
A-Bit Invert ON HOOK 1 1 0 1 1 * * *
OFF HOOK 0 1 0 1 0 1 * *
Normal NO RING * 1 * * 0 * * * 0 1 1 *
RING 0 0 * * 1 1 * * 0 0 1 *
A-Bit Invert NO RING * 1 * * 1 * * * 0 1 1 *
RING 0 0 * * 0 1 * * 0 0 1 *
Normal Battery * * * 0 * * * 0 * * * 0
Reverse Battery * * * 1 * * * 1 * * * 1
Page 7 Vers ion 1 .5– Nov14
HX9550R ROUTER/BRIDGE, TS AND TDMOE CARDS
Number of ports 2 LAN ports, 64 WAN from 1 to 32 IT
Interface 2 * 10/100BaseT
Connector 2 RJ45
Function One Bridge and Router
Routing Protocol Static, RIP-I, RIP-II, OSPF
VLAN Transparent au VLAN or Tagging or VLAN mapping per IT
Protocols TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay
Rates per WAN n* 64K channelized over E1/T1 up to 2Mbps
Up to 4Mbps in MLPPP
Function Server et Relay DHCP, QoS
Protocol Rapid Spanning Tree Protocoles 802.1w
Security NAT, NAPT, Firewall
Management Over the HX9550R or IN-Band over 1 TS or over Ethernet
Router/Bridge (1 mini slot)
Router/Bridge with 8ports Swich (1 slot)
Number de ports 8 ports LAN, 64 WAN de 1 à 32 IT
Interface 8 * 10/100BaseT
Connector 8 RJ45
Function One bridge, Router, Switch
Routing Protocol Static, RIP-I, RIP-II, OSPF
VLAN Transparent au VLAN or Tagging or Mapping the VLAN per IT
Protocol TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay
Rates per WAN n* 64K channelized over E1/T1 up to 2Mbps
Up to 8Mbps in MLPPP
Function Server et Relay DHCP, QoS
Protocol Rapid Spanning Tree Protocoles 802.1w
Security NAT, NAPT, Firewall
Management over HX9550R ou In-Band over 1 TS or over Ethernet
Terminal Server Interface(1 mini slot)
Connector One DB-44 conversion cable to one DB-9 and two DB-25 connectors
Ports One Async RS232 port, two Async/Sync RS232 ports.
The two Async/Sync ports can be configured independently
Data Rate Async: 1.2kbps, 2.4kbps, 4.8kbps, 9.6kbps, 19.2kbps, 38.4kbps
Sync: 64 kbps
Layer 2 Protocol of RS232 Async raw data
Layer 2 Protocol of RS232 Sync PPP
Terminal Server Function Supports Telnet
Router Function RIP-I, RIP-II, Static Route
TDMoE PseudoWire emulation(1 slot) Please read the dedicate documentation
WAN 2 Combo Gigabit Ethernet(GbE) Interface
LAN 2 RJ45 10/100/1000 BaseT port
PseudoWire Mode CESoPSN, SAToP and AAL1 (TDMoPSN)
256 bundle with protection, mini 1 TS maxi 2Mbps
TDM capacity 4 E1 of backplane card.
Packet Delay Variation: Unframed T1 up to 340 ms, Framed T1: Up to 256 ms
E1:up to 256 ms, Framed T1 with CAS: Up to 192 ms
Packet transparency support for all types of packet types including IEEE 802.1q VLAN and 802.1ad (Q-in-Q)
Page 8 Vers ion 1 .5– Nov14
Physical /Electrical
Clock Source Internal, E1/T1 Line, SSM modes, External E1 or T1 depending on CPU model, no SSM on external.
Alarm Relay Alarm Relay, Fuse alarm, and performance alarm, maxi current 1A at 24Vdc and 0.625A at 48Vdc
System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory)
Supervisor RS232, VT100 - front panel
10/100 Base-T, Ethernet on CPU front panel
In-band 64 Kbps in HDLC/PPP
Telnet, SSH v2, SNMP v1 and v3
Performance Monitor
Diagnostics Test Line
Certifications
Compliance ITU G.703, G.704, G.706, G.732, G.736, G.823, G.826, G.711, G.712,
G.775, O.151, V.11, V.28, V.54
IETF SNMP v.3 (RFC2571~2575)
Dimensions HX9550R-5U is 5U 19’’ 432 x 223 x 220 mm (W x H x D)
HX9550R-3U is a 3U 19’’ 438 x 132 x 224 mm (W x H x D)
Power HX9550R-5U Single or Dual -48V DC (-36 to –72V) , 150 Watts max.
Single or Dual –24V DC (-12 to –36V) , 150 Watts max. Mix not permitted
Single or Dual –150V DC 150 Watts max. Mix not permitted
HX9550R-3U Single or Dual -48V DC (-36 to –72V) 100 Watts max
Single 110/230V AC 150 Watts max
Weight HX9550R-5U : 7kg HX9550R-3U : 5kg (Chassis only)
Temperature -5 to 55°C
Humidity 0-95%RH (non-condensing)
Mounting Desk-top stackable, 19” /23” rack mountable
Line Power Supply (For G.SHDSL card only) Available only with DC power.
(For G.SHDSL card only) 60 mA constant current source, selectable peak voltage of 190 Vdc
Performance Registers Last 24 hours performance in 15 minutes interval and last 7 days in 24 hours summary
Separate Registers 12 MDSL ports, network, user, and remote site
Performance Reports Reports include MDSL port unsync Date & Time, Errored Second, Unavailable Second,
E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes, and Controlled Slip Second. Also
available in Statistics (%).
Alarm Queue Containing 40 alarm records which record the latest alarm type, location, and date & time
Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback)
GSHDSL interface (Payload Loopback, Local loopback)
Test Pattern E1/T1 interface (215-1 PRBS, 3-in-24, 1-in-8, 2-in-8, 1:1 patterns)
GSHDSL/DTE interface (211-1 BERT)
HX9550R-5U EN55022 Class A, EN50024, FCC Part 15 Class A, FCC Part 68, CS-03, IEC60950, UL60950, IEC
61850-3, IEEE 1613
IEC 61850-3 and IEEE1613: with -48Vdc(150W) power module , w/o Magneto card
HX9550R-3U EN55022 Class A, EN50024, EN300 386, FCC Part 15 Class A, FCC Part 68, CS-03, IEC60950-1,
EN60950-1
IEC 61850-3 and IEEE1613: with -48Vdc(150W) power module , w/o Magneto card
HX9550R SYSTEM - PRODUCT SPECIFICATIONS
HX9550R-5U HX9550R-3U
SDH Number of SFP 4 STM1 or STM4 4 STM1 or STM4
Nb of SNCP ring 1 1
Multiplexer Cross-Connect E1 252 E1 +64E1 252 E1 +36E1
Nb long slots 12 5
Nb mini slots 4 4
Max E1 tributaries 64 36
Max T1 tributaries 52 24
Page 10 Vers ion 1 .5– Nov14
PDH-ULSR RING PROTECTION
PDH ULSR Ring protection for E1 or n x E1
This protection is working with framed E1 and will protect a full E1 or several E1 in parallel and in Ring infrastructure.
This mode of protection is supported by the 4E1, MQE1 and Fiber-optic QE1 card only but only with HX9550R equipment, even E1
can be forward over any E1 PDH/SDH equipment over a clear channel transmission.
The transmission is Unidirectional, then the Working path is using the one direction of the E1 ring pipe and the Protection path will
use the reverse direction or the codirectional pair of the E1 pipe when the ring will be cut.
TS can be dropped and inserted at any node of the ring to create several “point to point connection” of x TS. The E1 ULSR ring can
transport maximum 31 “point to point links” over the ring.
The switching of the protection is based on LOF, LOS , AIS or the bad quality signal.
A ULSR ring with QX3440/HX9550R can support several E1 rings protection, but each HX9550R of this ring can also support
other rings with other HX9550R independently.
CAPABILITIES
• Use one E1 with protection in co-directional path
• Up to 16 E1 ring per chassis
• Use 4E1, mini 4 E1 and mini 4 E1 over fiber
• Recovery time of full traffic <250ms
• Recommended number of nodes per ring 15
• Drop insert of voice, data, Ethernet over PDH traffic
Page 11 Vers ion 1 .5– Nov14 Page 11
APPLICATION ILLUSTRATION PDH SNCP-64K PROTECTION
PDH SCNP protection for TS (64K) or n x TS
This protection mode is working with framed signal and will protect independently one TS (64kbps)
or n TS. This SNCP protection is based on Ring infrastructure.
This protection is supported by the 3E1 and a future Fiber-optic 3E1 cards only.
This mode of protection can work with QX3440, HX9500R and HX9550R, but the E1 links can be
forwarded over any PDH or SDH equipment in clear channel transmission.
The PDH SNCP protection can be set with Unidirectional or Bidirectional transmission.
The Working traffic and Protection traffic are always transmitted together over an E1 working path
and an E1 protection path.
In case of interruption of the Working path the concerned HX9550R will generate AIS-TS in each
protected TS, to order the switch on both end of the SNCP pipe.
This protection is very efficient and is avoiding the loss of data.
The HX9550R can support many TS ring protection between the same HX9550R or with other
HX9550R toward different directions by using sometime the same E1 for some section of the rings.
CXR Anderson Jacobson
Rue de l'Ornette
28410 Abondant - France
T +33 (0) 237 62 87 90
F +33 (0) 237 62 88 01
email: [email protected]
Smart Solutions for Smart Networks
www.cxr.com