8/13/2019 Quiz 1 Cad Cae

1/4

ID NO _____________________ NAME ____________________________________

CAD/CAE-TEST

Answer all questions. Q. no. 1 to 37 carries mark each.

1)

By default AutoCAD has the following work spacesA) 2D Drafting & Annotation B) 3D Modeling C) AutoCAD Classic D) All the above

2) The following is the file type of AutocadA) .DWG B) .IPT C) .ISM D) All the above

3) In order to move an objectA) Select a base point, followed by a point to define where the object is moving

B) Use the displacement option

C) Select object for grips, then move

D) All the above

4) Copy command also creates multiple copies of an objectA) True

B) False

5) To smoothen the sharp edges the following command is usedA) Chamfer B) Fillet C) Smooth D) Curve

6) When you create an object using polylineA) The object is created as a whole entity

B) The object is created with number of line segments

C) None of the above

7) Polar co-ordinates are given in the following formatA) (a,b) B) (@a,@b) C) @length

8/13/2019 Quiz 1 Cad Cae

2/4

15) The situation, where the number of dimensions or constraints exceed the number that are required inthe sketch is called

A) Constraint B) Under constraint C) Over- constrained D) None16) Which of the following combination of the entities cannot be used to apply the tangent constraint

A) Line, line B) Line Arc C) Circle, Circle D) Arc, Circle17) The copies of the sketched entities can be arranged along the length and width of an imaginary

rectangle using circular pattern

A) True B) False18) Which of the following drawing display options prompts you to select the entities whose magnification

will be increased

A) Zoom B) Pan C) Zoom Selected D) None19) Which one of the following tools can be used to arrange multiple copies of the sketched entities around

an imaginary circle

A) Move B) Rotate C) Rectangular pattern D) Circular pattern20) AutoCAD is a ______________ Software21) To create a 3D drawing from a 2D sketch ____________________ is the command used22) To create a hole on a solid figure _____________________ is the command used in inventor23) Autodesk Inventor allows you to create two types of patterns. These are _____________ pattern and

_____________ pattern.

24) Circularly symmetric objects can be drawn using __________________________ command25) To mirror the sketched entities, you need a ______________________ line26) To dynamically move the drawn object ____________________ command is used27) The logical operations are performed on the entity using __________________ tool bar28) Filleting is defined as the process of ___________ the sharp corners and sharp edges of the model29)________________ is one of the easiest methods of drawing parallel lines or concentric arcs and

circles

30) When you select a circle to be dimensioned, by default the ______________ dimension is applied to it.31) Using the ________ tool you can measure the radius of the arc32)Name the different co-ordinate systems that are used in Autocad33)____________ command is used to move an object to certain angle34) To generate a 3D complicated profile ________________ command is used35) To create a pentagon of 25 mm side length ____________ command is used36) In __________________ co-ordinate system the reference point will become the previous point37)______________________ co-ordinate system we use co-ordinates to build an object

8/13/2019 Quiz 1 Cad Cae

3/4

38) What is ARRAY and list different types of ARRAY commands (1 marks)

39) Using polar co-ordinate system write different commands to construct the following figure (2 marks)

40) Explain the navigational options, short cuts and wheel available in Autodesk Inventor 2014 (2 marks)

8/13/2019 Quiz 1 Cad Cae

4/4

41)Neatly draw the basic GUI (initial screen appearance) of Autodesk Inventor 2014 in Sketch mode.(5 marks)