QuickGuide - FanatecQuickGuide SHIFTER CALIBRATION TUNING OPTIONS To enter shifter calibration mode,...
2
SHIFTER CALIBRATION TUNING OPTIONS In order to enter shifter calibration mode, simultaneously press the Tuning Button and the button highlighted below. In order to enter Tuning Menu, press the Tuning button. In order to navigate inside the menu, use the right FunkySwitch™. Press it up or down to access 5 setups. Press the FunkySwitch™, right or left, to go through the options and turn the FunkySwitch™ to change option values. Tuning Button Tuning Button FunkySwitch™ MODE CENTRE CALIBRATION BUTTON MAPPING In order to switch between modes, simultaneously press and hold the two buttons highlighted below for one second. The wheel base LED indicates the active mode: ● Red indicates PC mode ● Blue indicates PS4™ mode* ● Purple indicates compatibility mode* If a centre calibration is needed (e.g: after firmware update of ClubSport Wheel Base) when using the steering wheel you need to enter the Tuning Menu by pressing the Tun- ing Button. When the Tuning Menu is active, press the analogue stick and the FunkySwitch™ at the same time as illustrated on the right in order to calibrate the wheel centre. Tuning Button 1 D-Pad + 24 22 23 PS 21 SHARE 8 2 3 R1 4 0 L1 5 R2 6 L2 7 N/A 25 L3 11 R3 10 OPTIONS 9 EN Quick Guide www.fanatec.com * Not applicable for every Fanatec wheel base. Please check the individual user manual of your Fanatec wheel base.
Transcript of QuickGuide - FanatecQuickGuide SHIFTER CALIBRATION TUNING OPTIONS To enter shifter calibration mode,...
SHIFTER CALIBRATION
TUNING OPTIONS
In order to enter shifter calibration mode, simultaneously press the Tuning Button and the button highlighted below.
In order to enter Tuning Menu, press the Tuning button.In order to navigate inside the menu, use the right FunkySwitch™. Press it up or down to access 5 setups.Press the FunkySwitch™, right or left, to go through the options and turn the FunkySwitch™ to change option values.
Tuning Button
Tuning Button
FunkySwitch™
MODE
CENTRE CALIBRATION
BUTTON MAPPING
In order to switch between modes, simultaneously press and hold the two buttons highlighted below for one second.The wheel base LED indicates the active mode:● Red indicates PC mode● Blue indicates PS4™ mode*● Purple indicates compatibility mode*
If a centre calibration is needed (e.g: after firmware update of ClubSport Wheel Base) when using the steering wheel you need to enter the Tuning Menu by pressing the Tun-ing Button.When the Tuning Menu is active, press the analogue stick and the FunkySwitch™ at the same time as illustrated on the right in order to calibrate the wheel centre.
Tuning Button
1
D-Pad + 24 22 23
PS21
SHARE8
2
3R1 4
0L15R26
L27
N/A25
L311
R310OPTIONS 9
EN
Quick Guide
www.fanatec.com
* Not applicable for every Fanatec wheel base. Please check the individual user manual of your Fanatec wheel base.
ATTACHING THE STEERING WHEEL
- Remove storage pin
- Pinch and hold Quick Release mechanism
A
- Slide Rim off ClubSport Wheel Base axleDetail A
- Place Rim face down on table
- Insert storage pin
- Align ClubSport Wheel Base axle, to correct position
- Press togther or “pinch” and hold Quick Release mechanism
- Slide Rim onto ClubSport Wheel Base axle
- Now release the sleeve of the Quick Release mechanism
- Now release the sleeve of the Quick Release mechanism
DETACHING THE STEERNIG WHEEL SHIFTER PADDLE OPTIONS
Make sure the newest CSW Base firmware file has been downloaded. You can obtain it at Fanatec’s website (www.fanatec.com) in the download section.
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany
Manufactured by
E.ON-Allee 3 - 84036 Landshut - GermanyTelephone: +49 (871) 9221-122 Fax: +49 (871) 9221-221Email: [email protected]: www.fanatec.com - www.endor.ag
![CENTER CALIBRATION TUNING MENU - Fanatec · TUNING MENU To enter the tuning menu press the [TUNING MENU] button. To navigate inside the menu, use the D-PAD [FunkySwitch TM]: • Press](https://static.fdocuments.us/doc/165x107/5fa674df761202243625c3cf/center-calibration-tuning-menu-fanatec-tuning-menu-to-enter-the-tuning-menu-press.jpg)
