QuickBooks User Manual - Mindscope€¦ · QuickBooks User Manual mindSCOPE Staffing and Recruiting...
Transcript of QuickBooks User Manual - Mindscope€¦ · QuickBooks User Manual mindSCOPE Staffing and Recruiting...
QuickBooks User Manual
mindSCOPE Staffing and Recruiting Software
www.mindscope.com
CURA Technical Support
Email: [email protected]
Phone: 1.888.322.2362 ext 1
CURA QuickBooks Synchronization
2 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Table of Contents
Preparing Your CURA Application for QuickBooks ..................................................................... 4
Getting Started ....................................................................................................................... 4
Configuring Timesheet Pay Types ...................................................................................... 4
Installing the CURA QuickBooks Synchronization Tool .............................................................. 7
Setting Up Your PC For The Synchronization Tool ...................................................................18
Preparing Timesheets from CURA for QuickBooks. ..................................................................30
Timesheet Overview ..............................................................................................................30
Preparing your Timesheets ....................................................................................................30
Finding Timesheets in the Candidates module: ..................................................................30
Filling out your Timesheet: Candidates Module ..................................................................31
Finding Timesheets in the Job Order Module: ....................................................................33
Filling out your Timesheet: Job Order Module ....................................................................34
Timesheets in The Tools Module .......................................................................................36
Finding Timesheets in the Tools module ............................................................................36
Filling out your Timesheet: Tools Module ...........................................................................37
Preparing QuickBooks for the Synchronization Tool .................................................................39
QuickBooks Preferences .......................................................................................................39
Dates and Times in QuickBooks ........................................................................................40
Payroll & Expenses ............................................................................................................42
Configuring and Running the CURA QuickBooks Synch Tool ...................................................47
Opening the QuickBooks Synchronization Tool .....................................................................47
Using the QuickBooks Synchronization Tool .........................................................................48
Import Tab: Chart of Accounts ...........................................................................................48
Preferences Tab ................................................................................................................52
Import Tab: Payroll items ...................................................................................................54
Transferring Information from CURA to QuickBooks ..............................................................56
Main Tab ............................................................................................................................56
CURA QuickBooks Synchronization Report & Report tab ..................................................59
Accessing Transferred Information in QuickBooks ....................................................................62
Client/Customer Information in QuickBooks ..........................................................................62
QuickBooks Customer Centre & Invoicing..........................................................................63
CURA QuickBooks Synchronization
3 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Employee Information in QuickBooks ....................................................................................66
Employee Centre in QuickBooks ........................................................................................67
Viewing Employee Timesheets in QuickBooks ...................................................................69
Contact Us ................................................................................................................................72
CURA QuickBooks Synchronization
4 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Preparing Your CURA Application for QuickBooks
In order for CURA and QuickBooks to synchronize correctly, certain settings in both CURA and
QuickBooks need to be adjusted to allow seamless communication between the two
applications.
Getting Started
Note: Have the Administrator password on hand if logged into a non-
Administrator user account.
Configuring Timesheet Pay Types
1. Go into the Tools Module found at the bottom left corner of your screen
CURA QuickBooks Synchronization
5 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. The first item that needs to be modified in CURA is the Timesheet settings. Scroll to the
bottom of the Corporate Tables list and select Timesheet Pay Type
CURA QuickBooks Synchronization
6 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. If your company pays employees any additional wages (such as bonuses) enter them in
the New Value typing field and click the Save button. If your company does not pay any
additional wages, you can skip to the next section on page 7.
4. If you wish to make your new pay type a flat rate, check the flat rate box next to the pay
type you created.
5. Add as many additional pay types as necessary for your business.
CURA QuickBooks Synchronization
7 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Installing the CURA QuickBooks Synchronization Tool
1. While still in the Tools Module scroll down the list until you find CURA QuickBooks
Synchronization. Click on it to prompt the download window to pop-up.
CURA QuickBooks Synchronization
8 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. The CURA Synchronization download process is in 2 separate stages. It requires you to
download the QuickBooks Foundation Library and the CURA QuickBooks
Synchronization Tool.
To begin click “Please Click Here for your QBFC 10 download to begin”
Note: This installation will only have to be performed once on your computer.
CURA QuickBooks Synchronization
9 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. A download window will open asking you if you want to run or save the file. Click on
Run to start downloading and installing the tool immediately or click on Save to save the
file on your machine.
4. A User Account Control window may pop up on your screen asking “Do you want to
allow this app to make changes to your PC?” Click on the Yes button.
CURA QuickBooks Synchronization
10 mindSCOPE Staffing and Recruiting Software www.mindscope.com
5. The Installation process will begin.
6. Click Finish to complete this part of the installation
CURA QuickBooks Synchronization
11 mindSCOPE Staffing and Recruiting Software www.mindscope.com
7. Navigate back to the CURA Quick Books Synchronization section in the tools module.
Click on CURA Quick Books Synchronization. From here download the second file on
the right where it says “Please Click Here for your download V10 to begin”.
CURA QuickBooks Synchronization
12 mindSCOPE Staffing and Recruiting Software www.mindscope.com
8. A download window will pop-up asking you to Open, Save, and Save As a zip file.
Select Open to start the download immediately. If you prefer to save the downloaded zip
file to your PC, then click Save or Save As.
CURA QuickBooks Synchronization
13 mindSCOPE Staffing and Recruiting Software www.mindscope.com
9. Once the zip window opens select both the CuraQBSynchronization.msi and
setup.exe files by holding the Ctrl key on your keyboard and clicking both files. Then
drag and drop the files onto your desktop.
CURA QuickBooks Synchronization
14 mindSCOPE Staffing and Recruiting Software www.mindscope.com
10. Once the files have been dragged onto your desktop right click on the setup file and click
Run as administrator. (If a security window asks if would like to run the application,
select yes.)
CURA QuickBooks Synchronization
15 mindSCOPE Staffing and Recruiting Software www.mindscope.com
11. When the install wizard opens click Next to start the installation process.
12. Select if you would like this tool installed for just your PC user account, or for all users
who use this PC. Then click Next
CURA QuickBooks Synchronization
16 mindSCOPE Staffing and Recruiting Software www.mindscope.com
13. The wizard will ask you to confirm the installation. To start installation, click on the Next
Button. Click Next to proceed.
14. Allow installation to run
CURA QuickBooks Synchronization
17 mindSCOPE Staffing and Recruiting Software www.mindscope.com
15. When complete click Close.
CURA QuickBooks Synchronization
18 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Setting Up Your PC For The Synchronization Tool
1. Open your start menu and click on File Explorer.
CURA QuickBooks Synchronization
19 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. Click on This PC on the lefthand side pane.
3. Double click on your computer’s (C:) drive
CURA QuickBooks Synchronization
20 mindSCOPE Staffing and Recruiting Software www.mindscope.com
4. Find the Program Files folder and double click on it to open it.
5. Once in the Program Files folder right click in any empty space and click New, then click
Folder.
CURA QuickBooks Synchronization
21 mindSCOPE Staffing and Recruiting Software www.mindscope.com
6. Name that new folder Mindscope.
7. Right click on the Mindscope folder and click Properties
s
CURA QuickBooks Synchronization
22 mindSCOPE Staffing and Recruiting Software www.mindscope.com
8. When the Properties window pops up navigate to the Security tab, and select the user
profile that you are currently using on your PC. Once you have selected your user profile
name click Edit.
Note: The name in the parenthesis next to Users will be unique to your PC and your PC
Login Name. Do not rename any usernames to match name listed in the above image.
Consult your PC Administrator for help if needed.
CURA QuickBooks Synchronization
23 mindSCOPE Staffing and Recruiting Software www.mindscope.com
9. Find your group or user name from the list, and proceed to Permissions for Users
section and check the box for Full Control, Modify, and Write. When all three have
been checked click Apply, then click OK.
CURA QuickBooks Synchronization
24 mindSCOPE Staffing and Recruiting Software www.mindscope.com
10. Click OK on the Mindscope Properties window.
11. Navigate back to the Program files window. On the left hand pane of this window click back
to your PC’s (C:) drive. (If you are using a 32-bit PC you can proceed to the next section on
Page 29
CURA QuickBooks Synchronization
25 mindSCOPE Staffing and Recruiting Software www.mindscope.com
12. When back in your PC’s (C:) drive, double click on Program Files (x86) folder.
13. Once the Program Files (x86) folder is open right click in any empty space and click
New, then click Folder. Name that new folder Mindscope.
CURA QuickBooks Synchronization
26 mindSCOPE Staffing and Recruiting Software www.mindscope.com
14. Right click on the Mindscope folder and click Properties
CURA QuickBooks Synchronization
27 mindSCOPE Staffing and Recruiting Software www.mindscope.com
15. When the Properties window pops up navigate to the Security tab, and select the user
profile that you are currently using on your PC. Once you have selected your user name
click Edit.
Note: The name in the parenthesis next to Users will be unique to your PC and your PC
Log-in Name. Do not rename any usernames to match name listed in the above image.
Consult your PC Administrator for help if needed.
CURA QuickBooks Synchronization
28 mindSCOPE Staffing and Recruiting Software www.mindscope.com
16. Find your group or user name from the list, and proceed to Permissions for Users
section and check the box for Full Control, Modify, and Write. When all three have
been checked click Apply, then click OK.
CURA QuickBooks Synchronization
29 mindSCOPE Staffing and Recruiting Software www.mindscope.com
17. Click OK on the Mindscope Properties window.
Your PC is now set up to start the CURA QuickBooks Synchronization process!
CURA QuickBooks Synchronization
30 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Preparing Timesheets from CURA for QuickBooks.
Timesheet Overview QuickBooks is sent pay information from timesheets in Temporary and Contract Placements
from CURA. In order for pay information to be sent to QuickBooks correctly the timesheets in
CURA need to be properly filled out and Approved. This is a 2 step process that is in place to
ensure the information is correct and verified.
Preparing your Timesheets Timesheets can be found in the Candidates, Job Order Module and Tools Module.
Regardless of where you access them they all behave the same when it comes to filing them
out and having them approved.
Finding Timesheets in the Candidates module:
1. navigate to a candidate’s summary page. From there click Schedule then click
Timesheet.
CURA QuickBooks Synchronization
31 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Filling out your Timesheet: Candidates Module
1. Once the timesheet window has loaded up you have a few different options on how to fill
out the time sheet.
o If you want to narrow down which client the candidate is working for, start typing
it in the Client Name field. The company name will populate after a few letters
have been typed in the field. A drop down menu will appear where you need to
select the name of the client you are looking for.
o You can narrow down placements viewed by Contact Name. This field acts the
same as the Client Name field.
o You can also choose which pay type to fill for the candidate by selecting the Pay
Type drop down menu
2. Enter the number of hours the candidate worked each day in the allotted fields, when
complete click the Save button. This will allow for the timesheet information to be
approved.
CURA QuickBooks Synchronization
32 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. When the timesheet has been saved from Step 2, it will allow the Approved check box to
be available to use. The person required to approve these is now to look over the
timesheet to confirm it is correct. Once confirmed this information will be ready to be
sent to QuickBooks. To approve, check the box under where the word Approved, then
click Save.
When the timesheet has been approved you will no longer be able to modify the hours,
and the timesheet will list the name of the person who made the approval.
Note: If a mistake is spotted on the timesheet after the approval process has started
simply uncheck the approval check box and click Save.
CURA QuickBooks Synchronization
33 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Finding Timesheets in the Job Order Module:
1. Navigate to the Job Order the temporary or contract placement is assigned to.
2. On the menu bar above the Job Order Defaults table click Placements.
3. In the placements section you will see a list of all the candidates that are placed in this
job order. Click on the Details button for the candidate for whose timesheet you would
like to modify.
4. A placements window will open, at the menu at the top of this window click on
Timesheet.
CURA QuickBooks Synchronization
34 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Filling out your Timesheet: Job Order Module
1. Once the timesheets window has opened navigate to the week to which you need to fill
out the hourly information. The timesheets work on a 2-step process where first the
hourly information is entered and then saved, and the second step is where the
timesheets are approved.
Fill out the hourly information and click Save.
2. After Step 1 has been completed and has been saved, the Approved check box will be
available to check off. Timesheets must be approved in order for the information to be
sent to QuickBooks.
CURA QuickBooks Synchronization
35 mindSCOPE Staffing and Recruiting Software www.mindscope.com
The hours that were previously entered have been approved and this time sheet is ready to be
sent to QuickBooks.
CURA QuickBooks Synchronization
36 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Timesheets in The Tools Module
The tools module is where you can find the master timesheets for all candidates who are placed
in a job placement. If you would like to enter hours for multiple candidates, you can do so here.
Finding Timesheets in the Tools module
1. Navigate to the Tools Module in CURA.
2. Scroll down the list until you see Timesheet
CURA QuickBooks Synchronization
37 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Filling out your Timesheet: Tools Module
1. Once you have found the time sheets in the tools module you will see a list of candidate
that are currently in a placement. To filter this view, you can type in a Client Name,
Contact Name, and select the Pay type for which you want to enter.
CURA QuickBooks Synchronization
38 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. Fill out number of hours in the allotted dates for each candidate.
Note that Candidate Suzette Alexandre has already had her timesheet approved. Both
completed and uncompleted timesheets will be listed here.
The timesheets are successfully completed and are ready to be sent to QuickBooks!
CURA QuickBooks Synchronization
39 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Preparing QuickBooks for the Synchronization Tool
QuickBooks Preferences
1. Open your company’s QuickBooks file. When on the home screen, go to the menu click
Edit, then Preferences.
CURA QuickBooks Synchronization
40 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Dates and Times in QuickBooks
1. When the Preference window pops up click on the General, and open the Company
preferences tab. Under the Time Format section select Minutes, and check the
boxes: Always show years as 4 digits (1999) and Save transactions before printing.
(Do not click Ok after you have made these changes)
CURA QuickBooks Synchronization
41 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. From the left pane click on the Time and Expenses. Open on Company Preferences.
Under the Time Tracking section select Yes. Change the First Day of Work Week
from the drop down list. Keep in mind the first day of the work week needs to match the
first day of the work week that you have in CURA.
CURA QuickBooks Synchronization
42 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Payroll & Expenses
1. Click on Payroll & Employees from the menu area on the left pane. Open the
Company Preferences tab at the top of the window. Locate the Display Employee List
by area at the bottom of this window. Select First Name.
2. After First Name has been selected click on the Employee Defaults button.
CURA QuickBooks Synchronization
43 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. From the Employee Defaults Window here is where you can add a flat rate item Pay
Type such as Bonus pay or vacation pay. Click <Add New>
4. In the Add New Payroll item window you can select the pay type you would like to add.
Even though there is a Bonus option available in QuickBooks it does not function the
same as it does in CURA, to work around this select the Commission option to add a
flat rate bonus. Then click Next.
CURA QuickBooks Synchronization
44 mindSCOPE Staffing and Recruiting Software www.mindscope.com
5. Name your commission Bonus, then click Next.
6. Payroll Expenses will be the default selection in the drop down menu of the next screen.
Simply select Next to continue.
CURA QuickBooks Synchronization
45 mindSCOPE Staffing and Recruiting Software www.mindscope.com
7. If your version of QuickBooks opens the following window, select the option that would
suit your company’s needs. Click Next to continue.
8. In the available typing field add your company’s flat rate. Click Finish when complete.
CURA QuickBooks Synchronization
46 mindSCOPE Staffing and Recruiting Software www.mindscope.com
9. This will return you to the Employee Defaults window. Click OK to close this window.
CURA QuickBooks Synchronization
47 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Configuring and Running the CURA QuickBooks Synch Tool
Opening the QuickBooks Synchronization Tool
1. Open the QuickBooks Synchronization Tool from your
desktop.
Note: Ensure that both CURA and QuickBooks are open prior to running the CURA
QuickBooks Synchronization Tool.
2. Enter your CURA username, password, and your company’s CURA URL and click
Login
CURA QuickBooks Synchronization
48 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Using the QuickBooks Synchronization Tool
Import Tab: Chart of Accounts
1. Navigate to the Import tab. Here is where we will import the Chart of Accounts to
properly fill out the Preference Tab. Click Import next to Chart of Accounts to begin. This
will prompt a window to popup in QuickBooks.
CURA QuickBooks Synchronization
49 mindSCOPE Staffing and Recruiting Software www.mindscope.com
2. Open QuickBooks. A window will appear because the CURA Synch Tool does not have
a certificate with QuickBooks. In order to allow the tool to operate properly select Yes,
whenever this QuickBooks Company file is open, and check the box next to Allow
this application to access personal data such as Social Security Numbers and
customer credit card information. Then click Continue to proceed.
CURA QuickBooks Synchronization
50 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. Another popup window will open to confirm that you are allowing access to the CURA
QuickBooks Synchronization tool. Click Yes to proceed.
4. Click Done to finish the process. And open your CURA QuickBooks Synchronization
tool.
CURA QuickBooks Synchronization
51 mindSCOPE Staffing and Recruiting Software www.mindscope.com
1. Now that QuickBooks has given permission for the CURA QuickBooks Synchronization
to access information you will see that the chart of accounts has been successfully
transferred. Click OK.
CURA QuickBooks Synchronization
52 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Preferences Tab
1. Once logged in, navigate to the Preferences tab.
2. Fill out the fields for the following according to your company’s QuickBooks version and
terminology:
a. QuickBooks Edition
b. QuickBooks User Mode
c. QuickBooks Invoice Group By
3. Check off settings that your company need. (settings where indicated with “ ”
4. Verify that banking information is going to correct accounts. Change accounts if
necessary.
5. Click Save when complete.
CURA QuickBooks Synchronization
53 mindSCOPE Staffing and Recruiting Software www.mindscope.com
6. Once settings have been saved, a window will popup saying Successfully Set
Preference.
Your additional Pay Types can be entered by scrolling down the Rate section. Since we have
not yet imported the Payroll Items, add the available rates to the additional pay rates for now.
Once the Payroll Items have been imported as well, you will be returning to the Preference
section to make the appropriate corrections.
Note: If any of the available drop down menus are blank after having imported the Chart
of Accounts, close the QuickBooks Synchronization Tool and restart it. The fields will be
populated once you return to the Preference tab.
CURA QuickBooks Synchronization
54 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Import Tab: Payroll items
1. Navigate to the Import tab
2. select the Import button to import the Payroll Items.
CURA QuickBooks Synchronization
55 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. When it is complete, you will get a confirmation window, which you can select Ok.
4. Return to the Preference tab and correct the additional payroll items. If the additional
payroll items configured in QuickBooks do not appear in the list, close the
Synchronization tool and restart it. When you log back in, the additional payroll items will
be available in the drop down menus.
CURA QuickBooks Synchronization
56 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Transferring Information from CURA to QuickBooks
Main Tab
1. After the previous steps have been completed go to the Main tab of the Synch tool.
Select the employment type for which you want to transfer timesheets for. (Contract or
temporary).
2. click the drop down window next to Week Start Date. This will be the date from which
you want to import timesheets from CURA.
CURA QuickBooks Synchronization
57 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. Choose the correct date. (In the below example January 17, 2016 has been selected)
Once your date has been selected, click Transfer.
Note: Each weekly timesheet from CURA can be transferred into QuickBooks only
once, unless the timesheet has been modified and resaved in CURA.
CURA QuickBooks Synchronization
58 mindSCOPE Staffing and Recruiting Software www.mindscope.com
4. When all the timesheet information has been successfully transferred click OK.
CURA QuickBooks Synchronization
59 mindSCOPE Staffing and Recruiting Software www.mindscope.com
CURA QuickBooks Synchronization Report & Report tab
5. When you have successfully transferred information from CURA to QuickBooks a report
will automatically be generated into your web browser. The Transfer Status will either be
OK or Updated depending on whether changes were made to the timesheets from
CURA, and re-transferred into the Synchronization tool.
CURA QuickBooks Synchronization
60 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Below is an example of the transfer report that has been updated.
CURA QuickBooks Synchronization
61 mindSCOPE Staffing and Recruiting Software www.mindscope.com
6. After viewing your Report, you can close it. If you need to view this report again
navigate to the report tab of the Synchronization tool. Here you will see a list of recent
reports that were made using this tool.
When you are finished with the tool Click the Logout button.
Note: You may clear the list of reports by selecting the Purge button.
You may access previously purged reports by going to your PC’s (C:) drive>
Mindscope>Purged.
CURA QuickBooks Synchronization
62 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Accessing Transferred Information in QuickBooks
Client/Customer Information in QuickBooks
1. When on the QuickBooks home window, click on Customers.
CURA QuickBooks Synchronization
63 mindSCOPE Staffing and Recruiting Software www.mindscope.com
QuickBooks Customer Centre & Invoicing
1. Once this window opens you will see a list of your clients in the Costumers & Jobs
pane to the left of the screen.
2. Click on the name of any of your clients and in the Customer Information area you will
see all the information that was parsed from CURA to QuickBooks in regarding to
company information and contact information.
CURA QuickBooks Synchronization
64 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. After clicking on the company name from the Customer & Jobs list locate the
Transactions tab on the right hand side of the screen you will see a list of invoices that
have been automatically generated from parsing the timesheet information using the
Synchronization tool. Double click on an invoice to view it.
CURA QuickBooks Synchronization
65 mindSCOPE Staffing and Recruiting Software www.mindscope.com
4. When the invoice loads here you will be able to view the contents of which the client is
being billed.
5. While viewing the invoice you have the option of changing the template type, emailing,
and printing the invoice.
CURA QuickBooks Synchronization
66 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Employee Information in QuickBooks
1. Navigate to the Home page in QuickBooks, and click on the Employee button.
CURA QuickBooks Synchronization
67 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Employee Centre in QuickBooks
1. In the left hand pane of the screen you will notice the names of the candidates that were
associated with the timesheets that you have transferred to CURA. The candidate
information that is in their CURA profile will also parse into this area.
2. Click on the names of any of your employees to see their pay history. To get more
details double click on the cheque that you would like to view.
CURA QuickBooks Synchronization
68 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. Here is an example of the employee cheque.
CURA QuickBooks Synchronization
69 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Viewing Employee Timesheets in QuickBooks
1. If you would like to view the timesheets that were transferred from CURA to QuickBooks,
you can find them in the Employee Centre.
2. Click on the Enter Time Icon, then select Use Weekly Timesheet.
CURA QuickBooks Synchronization
70 mindSCOPE Staffing and Recruiting Software www.mindscope.com
3. From here you will see the name of the employee you are viewing the timesheet for, and
the week of date that you are currently viewing.
4. To change the week of which you are viewing the timesheet, click the calendar icon next
to the dates listed. From there select the start date in the calendar that pops up for the
week you would like to view the timesheet for.
CURA QuickBooks Synchronization
71 mindSCOPE Staffing and Recruiting Software www.mindscope.com
5. The timesheet starting with the new date you selected will now display on the screen.
CURA QuickBooks Synchronization
72 mindSCOPE Staffing and Recruiting Software www.mindscope.com
Contact Us
This concludes the CURA QuickBooks Synchronization manual. If you have any questions do not hesitate to contact CURA support
Email : [email protected]
Phone: 1.888.322.2362 ext 1