Fountains and water features

Moisture vapor emission controlConcrete repair and restoration

• Cementitious waterproofing

• Crystalline waterproofing

• Liquid waterproofing admixtures

• Concrete repair products

• Chemical injection grouts

• Topically applied moisture vapor reduction systems

• Self leveling underlayments

Visit our website www.aquafin.net for more information.

AQUAFIN, Inc. • 505 Blue Ball Rd., #160 • Elkton, MD 21921 Toll Free 1-866-AQUAFIN • Phone (410) 392-2300 • Fax (410) 392-2324 info@aquafin.net • www.aquafin.net

Waterproofing & Concrete Restoration • High Performance Coatings Moisture Vapor Remediation & Flooring • Injection Grouting

Servin

g the

co

nstruction industry since 1989

years20+

Quick Reference Product Guide

Injection grouting

Foundations and pitsTraffic bearing coatings

Balconies, patios and walkwaysWater and wastewater facilities

Think Globally. Act Locally.

CONCRETE REPAIR

AQUAFIN®-1KPolymer modified cementitious waterproof coating• Cementitious breathable membrane• For concrete, brick & masonry• Resists strong hydrostatic pressure• Applied to positive or negative side• NSF/ANSI 61 certified for potable water

AQUAFIN®-2K/MHighly flexible cementitious protective coating • Acrylic modified, waterproof, breathable

membrane • Withstands pedestrian traffic • Available in several colors • Elongation up to 85% • Adheres to many substrates

WATERPROOF COATINGS

VAPORTIGHT COAT-SG2 & SG3Post applied “vapor barriers”• Reduce water-vapor emissions of up to

25 lbs to 3 lbs or less• Flooring system can be installed as quickly as

2-3 hours later (with Accelerator)• Suitable for “green” concrete• Applied to damp concrete• Alkalinity barrier (pH 13-14)• SG2 treats oil contaminated slabs

VAPOR EMISSION CONTROL

AQUAFIN®-PM3811Acrylate injection gel • Adjustable curing times• Excellent penetration into various

substrates & soil• Waterproof, stabilize soil & fill voids• Can be injected against water pressure

AQUAFIN®-RAPIDFLEX-213Non-foaming, polyurethane injection grout • Higher tensile & adhesion strengths vs

foaming PU-grouts• Can be injected against water pressure• Bonds tenaciously to wet and dry surfaces,

compatible with water• Extremely quick reaction time

AQUAFIN® InjectPro-LVHydrophobic, flexible polyurethane grout• Low viscosity• For sealing cracks where some movement is

possible• Zero VOC‘s - meets LEED criteria• Can expand more than 20 x initial volume

AQUAFIN® InjectPro-CutHydrophobic polyurethane grout• For sealing static joint and cracks in concrete• Zero VOC‘s - meets LEED criteria• Can expand more than 25 x initial volume

INJECTION GROUTING

Visit our website for complete product information and a complete listing of all products: www.aquafin.net or contact us toll free at 1-866-AQUAFIN (278-2346)

AQUAFIN®-ICCrystalline waterproofing slurry• Penetrates into concrete• Permanently active (breathable)• Applied to damp substrate• Resists strong hydrostatic pressure• Applied to positive or negative side• Self sealing effect to 1/64” crack width• NSF/ANSI 61 certified for potable water

AQUAFIN®-IC-ADMIXLiquid crystalline waterproofing admixture• Ready to use• Easy mixing, minimal influence on mix design• Resists extreme hydrostatic pressures• Waterproofs concrete even at high w/c

ratios• Self sealing effect to 1/64” crack width• NSF/ANSI 61 certified for potable water

CRYSTALLINE WATERPROOFING

SELF LEVELING UNDERLAYMENTS

031313 ED/PG

/AM

LEVEL-Ultra Moisture tolerant, calcium aluminate, cementitious self leveling underlayment• Use both interior and exterior• Installs from 1⁄8” - 1¼”• Great for fast track construction• Compatible with radiant floor heating and a

variety of floor coverings

LEVEL-Plus Moisture tolerant, calcium aluminate, cementitious self leveling underlayment• Use both interior and exterior• Installs from ¼” - 2½”• Great for fast track construction• Compatible with radiant floor heating and a

variety of floor coverings

LEVEL-Patch-FF Rapid setting, horizontal grade floor finish• Skim coat and patch• Feather edge to 3⁄8”• One component - just add water• Fast setting

REBAR PRIMER/BOND-CI Cementitious corrosion-inhibiting coating for reinforcing steel• Extended pot life and contact time• Resistant to penetration of water and chlorides• Very easy to use on vertical & overhead areas• Active corrosion inhibitor

MORTAR-40Polymer modified structural repair mortar• Up to 1½” vertical, 4” horizontal• Can be troweled or sprayed• High strength, interior & exterior• Shrinkage compensated• NSF/ANSI 61 certified for potable water

MORTAR-V/O Vertical & overhead concrete repair mortar• Non-sag - excellent “hang” characteristics• For concrete, masonry & block• Low shrinkage• Excellent workability - can be sculpted and

shaved with ease

MORTAR-LNSlow setting waterproof lining, repair & sealing mortar

• Horizontal, overhead, vertical• Heavy duty - traffic bearing• Patching, reprofiling & strucural repair mortar• Single layer up to 1” thickness• Can be troweled or sprayed• NSF/ANSI 61 certified for potable water

MORTAR-ScreedOne part, polymer modified, full depth concrete repair mortar• Fiber reinforced, strong final strengths• Polymer modified, strong adhesion to concrete• Installs from 3/8“ to 5“

Plug-ICFast set crystalline cementitious waterstop• Stops active water leaks• NSF/ANSI 61 certified for potable water• Waterproof seal strips at joints (coves & reglets)

FIX 10-SUltra fast set cementitious waterstop• Stops active water leaks• 10 to 30 second set time

Download our App today!