Quick Operation Guide Quick Config Display Switch On
2
Quick Operation Guide Quick Zero & Calibration (Optional) 10s Quick Config Display Switch On Alarm Acknowledge Self Test 1s 1s Pump Manual Datalog 1s 2s Switch Off 3s Calibration Overdue www.teledynegfd.com This Quick Operation Guide is NOT a substitute for the Operations & Maintenance Manual which MUST be read and understood, prior to operating, by anyone using or servicing the monitor. Failure to do so may result in serious injury or death.
Transcript of Quick Operation Guide Quick Config Display Switch On
Quick Operation Guide
Quick Zero & Calibration (Optional)
10s
Quick Config Display Switch On
Alarm AcknowledgeSelf Test
1s1s
PumpManual Datalog
1s
2s
Switch Off
3s
Calibration Overdue
www.teledynegfd.com
This Quick Operation Guide is NOT a substitute for the Operations & Maintenance Manual which MUST be read andunderstood, prior to operating, by anyone using or servicing the monitor. Failure to do so may result in serious injury or death.
Part Number: 64191Issue 7.1
BacklightMAX / MIN / STEL / LTEL
ResetMAX / MIN
20s
Zero Fault / Flow Fault
1s
Charging
4h