Quick Changeover. Context, then theory…… in preparation for practical exercise tomorrow.
description
Transcript of Quick Changeover. Context, then theory…… in preparation for practical exercise tomorrow.
Quick Changeover Techniques
Quick Changeover Techniques
1
Quick Changeover. Context, then theory……in preparation for practical exercise tomorrow.
Quick Changeover TechniquesQuick Changeover Techniques
Quick Changeover Techniques
Quick Changeover Techniques
2
Quick Changeover TechniquesQuick Changeover Techniques
With long changeover or set-up times the challenge is to reduce these times so that we can produce what is required, when it is required.
Quick Changeover Techniques
Quick Changeover Techniques
3
Long Set-up TimesLong Set-up TimesTraditional Company
Accept Set-up time
World Class CompanyChallenge to improve Set-up
time
The traditional approach is to live with long set-up times, the
tradeoff is often excess inventory caused by long runs.
The world class approach is to challenge and reduce long set-up times, so we can produce what is
required when it is required.
Quick Changeover Techniques
Quick Changeover Techniques
4
Definition of Changeover TimeDefinition of Changeover Time
The time taken betweenthe last product producedfrom a previous run to the running of another quality
product at full speed.
The time taken betweenthe last product producedfrom a previous run to the running of another quality
product at full speed.
Quick Changeover Techniques
Quick Changeover Techniques
5
Standard Set-up ActivitiesStandard Set-up Activities
1. Preparation, Cleaning, Paperwork.
2. Attachment and Removal of Parts.
3. Centering, Dimensioning and Setting Conditions.
4. Trial Processing and Adjustment.
Think of a change over.
What are the things that happen ?
Think of a change over.
What are the things that happen ?
Quick Changeover Techniques
Quick Changeover Techniques
6
Time Spent on Standard Setup ActivitiesTime Spent on Standard Setup ActivitiesMany activities done after production has stopped could have been done as preparation before stopping the previous production run.
1. Preparation and function checks 30%
2. Attachment and removal of parts 5%
3. Centering,dimensioning andsetting condition 15%
4. Trial processing and adjustments 50%
Quick Changeover Techniques
Quick Changeover Techniques
7
Think of Quick Changeover - Formula 1 RacingThink of Quick Changeover - Formula 1 Racing
PreparationPreparation
SpecialisedEquipmentSpecialisedEquipment
TeamworkTeamwork What else is required?
What else is required?
Quick Changeover Techniques
Quick Changeover Techniques
8
Fundamental ConceptFundamental ConceptTo achieve QCT it is important to differentiate between what can be done before stopping production what has to be done once production has stopped, that is differentiate between Internal and External Changeover.
Internal Changeover:Activities that must be done
while the machine is shut down
External Changeover:Activities that can take
place while the machine is operating
Quick Changeover Techniques
Quick Changeover Techniques
9
Examples of Activities Examples of Activities
Internal
• Exchange machine parts
• Exchange products• Cleaning• Adjust settings• Running in• .• .
External• Paperwork• Cleaning• Collection of parts,
tools, materials, people• .• .• .
5 Minutes. Buzz groups. Identify other examples.
Quick Changeover Techniques
Quick Changeover Techniques
10
Important Principle of QCTImportant Principle of QCT
Minimise the Internal TimeMinimise the Internal Time
Quick Changeover Techniques
Quick Changeover Techniques
11
Run A
Minimise the
Internal Time
Minimise the
Internal Time
The 5 Steps of QCT
The 5 Steps of QCT
Changeover Time
Run BRun A
Run BRun A
Run BRun A
Run BRun A
Reduced Changeover Time
12 Remove External Elements
13 Convert Internal to External
14 Streamline Internal Elements
15 Streamline External Elements
Run B
START - Define Internal and External Elements11Change overInternalExt Ext
Quick Changeover Techniques
Quick Changeover Techniques
12
Step 1: Define Internal Elements• Observe an actual changeover.• Record the actual steps in the changeover process.• Analyse the changeover.
Step 2: Remove external elements from the changeover time• Eliminate the external elements
identified in step 1.
Step 3: Convert as many internal elements to external elements• Review the remaining internal
elements and determine if they can be externalised.
Quick Changeover Techniques
Quick Changeover Techniques
13
Step 4: Streamline the remaining internal elements
• Eliminate adjustments.
• Use single turn attachments.
• Use single motion devices.
• Changeover team should not move their feet while performing a changeover.
• Use parallel operations where possible.
Step 5: Streamline the external elements
Quick Changeover Techniques
Quick Changeover Techniques
14
Quick Changeover Techniques Bar ChartQuick Changeover Techniques Bar Chart
StepNo.
StepNo.
StepDescription
StepDescription
StepTime (min)
StepTime (min)
Bar Chart (Time -min)Bar Chart (Time -min)
55 1010 1515 2020 2525 3030
11
3535 4040
2233445566778899
101011111212
Total Time
Quick Changeover Techniques
Quick Changeover Techniques
15
Quick Changeover Techniques Analysis SheetQuick Changeover Techniques Analysis Sheet
StepNo.
StepNo.
StepDescription
StepDescription TimeTime External/
InternalExternal/Internal
112233445566778899
101011111212
Total Time
ProblemProblem SolutionSolution
Quick Changeover Techniques
Quick Changeover Techniques
16
Case Study – Backsliding. Implementation of New Changeover Procedure:
Case Study – Backsliding. Implementation of New Changeover Procedure:
Last year, a well known consumer goods company spent four months and $68,000 on C.I. and Quick Changeover re-engineering of their filling lines to enable operators to perform faster changeovers.
A statement by the best operator was recorded:-" We wanted to do well, but we just reverted back to our old way of doing things".
•The production manager was fascinated and researched this……….. 1
One year later, during review, the changeovers were taking more than double the predicted time, and very little of the predicted savings had been realized. So, what went wrong?
Quick Changeover Techniques
Quick Changeover Techniques
17
Case Study – Backsliding. Implementation of New Changeover Procedure:
Case Study – Backsliding. Implementation of New Changeover Procedure:
He found that most people could be good at learning, but they often need more help with
unlearning.
He found one thing causing it.Repetition - each time that a person carries out a task, they are strengthening the knowledge and motor skill links associated with that task, further strengthening those learning links…. Learning is a process of making links (neural pathways) between brain cells (neurons) in the brain.And when he studied further he found:-Emotion. The things we do, we become attached to in our thinking and valuing, even if those things don’t serve us very well.
And another thing. It just happens in humans automatically.It all happens outside of conscious awareness.
Breaking habits.
2
Quick Changeover Techniques
Quick Changeover Techniques
18
Case Study – Backsliding. Implementation of New Changeover Procedure:
Case Study – Backsliding. Implementation of New Changeover Procedure:
Looking forward, he wanted his operator saying
‘That’s the way we do things around here’ And he realised that there must be focus and support provided by leaders during the unlearning/learning process.
3
Support during the process of unlearning and new learning is vital.
Quick Changeover Techniques
Quick Changeover Techniques
19
Case Study – Backsliding. Implementation of New Changeover Procedure:
Case Study – Backsliding. Implementation of New Changeover Procedure:
3
What are the ways to provide support during the learning transition period?‘‘Support during the Support during the
process of process of unlearning and new unlearning and new
learning is vital.’learning is vital.’
How do you do this?
5 Minutes.
Buzz groups.
Identify possibilities.
Quick Changeover Techniques
Quick Changeover Techniques
20
Implementing the 5 Steps for Quick ChangeoverImplementing the 5 Steps for Quick Changeover
Quick Changeover Techniques
Quick Changeover Techniques
21
Sustaining the GainsSustaining the Gains
• Team members are trained and skilled.
• Change over objectives and actual results are displayed and tracked.
• SOP’s and check sheets are displayed and used.
• Support and resources are available to the team for improvement.
• Celebrate success.
Quick Changeover Techniques
Quick Changeover Techniques
22
Manage complexity & flexibility through rapid change-overs
Quick Changeover Techniques
Quick Changeover Techniques
23
Quick Changeover Techniques
Quick Changeover Techniques
24
Quick Changeover Techniques
Quick Changeover Techniques
25
SummarySummary
Quick Changeover Techniques
Quick Changeover Techniques
26
Run A
Minimise the
Internal Time
Minimise the
Internal Time
The 5 Steps of QCT
The 5 Steps of QCT
Changeover Time
Run BRun A
Run BRun A
Run BRun A
Run BRun A
Reduced Changeover Time
12 Remove External Elements
13 Convert Internal to External
14 Streamline Internal Elements
15 Streamline External Elements
Run B
START - Define Internal and External Elements11Change overInternalExt Ext
Quick Changeover Techniques
Quick Changeover Techniques
27
Quick Changeover Techniques Bar ChartQuick Changeover Techniques Bar Chart
StepNo.
StepNo.
StepDescription
StepDescription
StepTime (min)
StepTime (min)
Bar Chart (Time -min)Bar Chart (Time -min)
55 1010 1515 2020 2525 3030
11
3535 4040
2233445566778899
101011111212
Total Time
Quick Changeover Techniques
Quick Changeover Techniques
28
Quick Changeover Techniques
Quick Changeover Techniques
29
Sustaining the GainsSustaining the Gains
• Team members are trained and skilled.
• Change over objectives and actual results are displayed and tracked.
• SOP’s and check sheets are displayed and used.
• Support and resources are available to the team for improvement.
• Celebrate success.
Quick Changeover Techniques
Quick Changeover Techniques
30
…And QCT will be necessary not only for your success
…But also your sanity.