55th Annual Samuel P. Maggard

Quality Concrete School

Craig Newtson 575-646-3034 Chair Brad Weldon 575-646-1167 Co-Chair Mike Black 575-639-3938 Sean Brady 505-257-8673 Pat Conover 915-478-1910 Bob Hall 303-986-4077 Frank Kozeliski 505-870-0316 Lee Lommler 575-642-3582 Walter Meech 505-287-2944 Ruben Olivas 575-740-3952 Genaro Salinas 915-727-5332 Ken Wylie 505-821-1801

Oscar Antommattei 303-325-0323 Rod Billingsley 505-454-9592 Sean Brady 505-257-8673 Chris Dagosta 602-930-3793 Dan Dieter 509-520-0027 Rick Dyke 505-433-8003 Bill Kingsley 915-584-1317 Frank Kozeliski 505-870-0316 Lee Lommler 575-642-3582 Jeff Mann 505-827-3245 Miles Shiver, IV 505-877-5777 Kenny Stevens 575-646-2491 Benito Trevino 575-882-2294 Ken Wylie 505-821-1801

A Special Thank You to This Year’s Planning Committee and Speakers!

Planning Committee Speakers

Co-Sponsors

January 11-12, 2019 NMSU Campus

Hernandez Hall, Room 103

Registration: professionaldevelopment.nmsu.edu/courses Fee $90 (after Jan. 7 fee increases to $100)

Parking: Campus maps, parking information available at park.nmsu.edu

Lodging: Visit the Las Cruces Convention & Visitors Bureau at lascrucescvb.org

Professional Development Hours: Up to 10 PDH For more information, contact Dr. Craig Newtson, Professor, Civil Engineering, 575-646-3034, newtson@nmsu.edu

PO Box 30001, MSC Eng NM, Las Cruces, NM 88003

575-646-7852

spatrico@nmsu.edu engrnm.nmsu.edu

Learn more about Engineering New Mexico Resource Network Professional Development Courses and Workshops:

professionaldevelopment.nmsu.edu

Friday, January 11

Session A (room 109)

Session B (room 103)

Friday, January 11 (continued)

Saturday, January 12

8:00 a.m. Registration Hernandez Hall Lobby

8:30 a.m. Orientation and Opening Remarks

Room 103 Craig Newtson, Professor, NMSU Miles Shiver, IV, NMRMCAA, President, Duke City Redi-Mix Lakshmi Reddi, Dean, NMSU College of Engineering

8:45 a.m. Basic Properties Rick Dyke, GCC

10:45 a.m. Break

11:00 a.m. More Basic Properties Kenny Stevens, NMSU

8:45 a.m. Construction Risk Management Oscar Antommattei,

Kiewit Corporation

9:45 a.m. Fibers Dan Dieter, Sika Corporation

10:45 a.m. Break

11:00 a.m. CRCP in New Mexico Jeff Mann,

Benito Trevino NMDOT

1:30 p.m. Sampling and Testing *Judging Pavilion

Lee Lommler, Wood Environment & Infrastructure Solutions

Bill Kingsley, PSI

3:00 p.m. Break

3:15 p.m. Sampling and Testing (continued at the Judging Pavilion)

10:45 a.m. Break

11:00 a.m. More Basic Properties Room 109

Kenny Stevens, NMSU

1:30 p.m. Build with Strength Chris Dagosta,

National Ready Mixed Concrete Association

2:30 p.m. Pavement Design Ken Wylie,

Wood Environment & Infrastructure Solutions

3:30 p.m. Break

3:45 p.m. NMDOT Specifications Sean Brady, NMDOT

8:00 a.m. Coffee Hernandez Hall Lobby

8:30 a.m. Concrete Mix Design Workshop

Frank Kozeliski, Consultant

Kenny Stevens, NMSU

8:30 a.m. Transporting, Placing, Finishing, and Curing Concrete

Ken Wylie Wood Environment & Infrastructure Solutions

10:30 a.m. Dispute Resolution Room 103, Rod Billingsley, Billingsley Engineering

11:30 a.m. Closing Remarks and Awarding of Certificates, Room 103

5:15 p.m. Membership and Board Meeting Room 240A

7:00 p.m. Dinner, St. Clair Winery & Bistro (Dutch)

12:00 p.m. Lunch Hershel Zohn Rehearsal Hall, NMSU Center for the Arts

Session A (room 109)

Session B (room 103)