QIS 330 - GeneratorIn accordance with ISO 8528/1 (2005) PRP STANDBY POWER: Electrical power data at...
Transcript of QIS 330 - GeneratorIn accordance with ISO 8528/1 (2005) PRP STANDBY POWER: Electrical power data at...
-
QIS 330 | 400/230 V | 50HZ |
1 / 8
Diesel Generator Set
QIS 330
Voltage: 400/230 V
Frequency: 50HZ
Technical specifications
Genset Image for illustration purposes only
330
264kW
kVAStandby Power (ESP)
TECHNICAL INFORMATIONg
300
240kW
kVAPrime Power (PRP)
SoundproofedMechanical structure
DOOSAN P126 TI-IIEngine
MECC ALTE ECO38-2L/4AAlternator
DEEP SEA 7320 MKIIControl card
3.840 x 1.470 x 1.785mmMeasures (L x W x H)
2.256kgEmpty weight
489LFuel tank
72dB(A) a 7
m
Acoustic pressure, LpA
97dB(A)Acoustic power LwA
(kVA) (kW)(kVA)
VoltagesPrime Power (PRP) Standby Power (ESP)
(kW)
380/220 300 240 330 264
400/230 300 240 330 264
415/240 300 240 330 264
Notes:
PRIME POWER: Electrical power data available at a variable load without limits of hours per year. An overload of
10 % is allowed for 1 hour of every 12. In accordance with ISO 8528/1 (2005) – PRP
STANDBY POWER: Electrical power data at variable load in an emergency in accordance with standard ISO
8528/1 (2005) – ESP. Overloads of emergency power are not allowed.
The standard reference conditions are: 25 ºC, 100 kPa and 30% relative humidity. Gasoil density: 0.85 g/cm3.
Gasoline density: 0.68 g/cm3.
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
2 / 8
g
General description
Engine
Alternator
Bedplate
Soundproofed canopy
Electric Panel
ATS
Dimensions and Weight
Performance class
Regulation
Annex: Drawings
Grupos Electrógenos Europa, S.A. is a certified company with ISO 9001, ISO 14001, OHSAS 18001 and PECAL
We reserves the right to modify any characteristic of their equipment without prior warning.
Photographs representing the product range, while able to include options.
Weight and dimensions of a standard generator set.
Non-contractual document
Central Offices:
Polígono Industrial Pitarco II; Parcela 20
50450 Muel (Zaragoza) Spain
Tel.: +34 976 14 54 32
Fax: +34 976 14 54 31
After-sales Department:
Customer service: +34 976 14 54 33
Spare parts: +34 976 14 54 34
INDEX
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
3 / 8
GENERAL DESCRIPTION
Specifically developed for the industrial applications, this stationary soundproof generator set is easy to use and
straightforward to maintain. The available features & options are designed to fully meet the requirements of all
industrial applications. The generator set will automatically start on mains failure and cool down and stop as soon as
the mains come back. The generator set also controls the load transfer between mains (utility) and generator set. It
can also be start-up by means of an external signal.
It’s your solution for Predictable Power.
g
ENGINEg
Doosan diesel engine, with turbo, with direct injection and Electronic regulation of the engine.
Engine brand DOOSAN 123Bore (mm)
Model P126 TI-II 155Stroke (mm)
R.P.M. 1.500 17,1:1Compression ratio
Net power (kWm) 287 ElectronicType of regulation
Fuel Diesel ---Europe exhaust emission
No. of cylinders 6 L ---EPA exhaust emission
Engine Capacity (c.c.) 11.051
Cooling System
Cooling of the sleeves using cooling fluid comprised of water and glycol at 50% in a closed circuit driven by the engine
pump.
Engine driven exhaust fan, radiator and expansion tank; original from the engine manufacturer.
The circuit is completed with the cooling purge system towards the outside of the bedplate and protections of all running
surfaces
Flow of air from fan (m³/min) 450 51Coolant capacity (l)
Cooling type Water 45ºCDesign temperature radiator
(ºC)
Lubrication System
Gear pump lubrication system driven by the engine and with original engine manufacturer lubricant filtering system.
It is completed with the oil purge system towards the outside of the baseframe.
Oil capacity (l) 23 0,4Medium oil consumption (%
fuel consumption)
Air intake system
Air intake system for combustion with filtering device and filter change indicator; originals from the engine
manufacturer. Intake air cooling after the turbo by means of an air/air exchanger.
Intake air flow (m³/min) 22 MediumAir inlet filter type
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
4 / 8
Exhaust System
The exhaust system consists of pipes, bellow, interior and exterior aluminized steel exhaust silencer that is highly
resistant to corrosion and hot part protections. Rain cap available as an option.
Tª gas emission (ºC) 650 4Inlet diameter (")
Gas flow (m3/min) 51 453Body diameter (mm)
Maximum exhaust back
pressure (kPa)
5,9 1.340Exhaust length (mm)
Number of exhaust 1 26Atenuattion (dB(A))
Outlet diameter (") 5,5
Start system
Start system that uses an electrical motor, battery, battery disconnector and battery charge alternator that is driven
by the engine itself. The start motor and the battery charge alternator are originals from the engine manufacturer.
Lead acid battery with Spiralcell® recombining technology, sealed structure to prevent leaks, maintenance free, large
start-up capacity maintaining the voltage due to its low internal resistance and small volume thanks to its rolled plates
design that guarantees it will withstand many discharges with large temperature changes.
Starter voltage system (V) 24 2 x 12V 44Ah - 730ABattery type
Fuel supply system
Fuel intake system original from engine manufacturer with filter.
Fuel tank capacity (L) 489
25%
50%
75%
100%
16,7
31
47
62
17,9
34
51
76
29
15,8
10,5
7,8
27
14,3
9,7
6,4
Fuel consumption panel (range according to the standard configuration)
LoadPrime Power (PRP) Standby Power (ESP)
(l/h) Range (h) (l/h) Range (h)
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
5 / 8
ALTERNATORg
Mecc Alte alternator with 4 poles, with a lifetime lasting greased bearing, H class insulation, without brushes, 2/3 coil and
AVR (Automatic Voltage Regulator)
Protection of all the windings by means of 2-part high quality polyester resin impregnation. The stator windings receive a
double impregnation. Final finish with a coat of EG43 varnish.
Excitation system with MAUX auxiliary winding with overload capacity 3 times the nominal current for 20 s.
Joining of engine and alternator through flexible disc coupling.
Regulations:
• CEI 2-3
• IEC 34-1
• EN 60034-1
• VDE 0530
• BS 4999-5000
• CAN/CSA-C22.2 No14-68-No100-95
• ISO 8528:3
Low wave distribution:
• THC < 4%
• THD < 4%
• THF (IEC) < 2%
• TIF (NEMA) < 40
Incorporates electromagnetic emissions suppressor in accordance with standard VDE 0875, class K.
Brand MECC ALTE ±1%Voltage Stability
Model ECO38-2L/4A 94Performance at 75% p.f.
0.8 (%)
Alternator Power (kVA) 330 / Standby (SB27) 94Performance at 100% p.f.
0.8 (%)
Number of wires 12 8,1Direct subtransient
reactance X"d (%)
IP Alternator IP 23 12,5Subtransient time
constant, T"d (ms)
Excitation system MAUX 2,3Zero sequence reactance,
Xo (%)
AVR model DSR 0,4Short-circuit ratio, Kcc
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
6 / 8
BEDPLATEg
The engine-alternator set is coupled to the bedplate by means of anti-vibration shock mounts that absorb almost all the
vibrations.
The base frame is made of a phosphate, passivated steel profile with polyester dust paint that guarantees a resistance of
up to 480 hours in a saline mist chamber in accordance with standard ASM B-117-09.
The base frame is able to hold 100% of the liquids of the genset, reducing any potential environmental impact. It has a
drainage plug.
SOUNDPROOFED CANOPYg
Soundproof generator set galvanized finish using polyester dust paint.
It is lined inside with a noise-absorbing material made of mineral wool.
It also has an emergency shutdown pushbutton that is accessible from the outside.
ELECTRIC PANELg
Electrical panel integrated in the generator set with digital control plate.
Has an all-pole circuit breaker, manually actuated, with thermal-magnetic protection against overloads and
short-circuits.
Circuit Breaker rated
current (A)
630A 4P R DSE 9255 - 24V 5ABattery charger
Has a DEEP SEA battery charge maintainer, designed to be permanently connected to the battery and maintains it
charged to its maximum capacity.
Has no moving parts. The charger switches to floating mode when the charge is complete
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
7 / 8
Control Card
DEEP SEA control plate, DSE 7320 with grid monitor that starts-up the generator set when it detects a failure in the
electrical power supply from the grid and sends a signal to the switching panel to switch from the grid position to the
group position . Once the power supply has been re-established, it sends an order to the switching panel to transfer
the generator set power to the grid and shuts-down the generator set once it has cooled down. It also starts-up the
generator set using an external signal.
Also, control plate DSE 7320 checks a large number of parameters of the generator set which allows it to display
information, statuses and alarms. If required, it will shutdown the generator set: Due to high coolant fluid
temperature, low oil pressure, low coolant fluid level, etc.
Includes a 132x64 pixel LCD screen with lighting, 5 navigation menubuttons, independent operational mode buttons,
and alarms and status indicating LEDs.
Communications via USB, RS232, RS485, as well as DSEnet® for system upgrade. Possibility of Ethernet connection
(requires a separate module). MODBUS protocol available for client software. Completely configurable using a PC in
Windows environment and free Scada type software in real time.
Includes reading and displaying of parameters with RMS values, real time clock, events history log up to 250 events
and programming of alarms, events, start-ups and shutdowns.
Operating modes: START-UP, SHUTDOWN, AUTO, MANUAL AND TEST.
Generator
• Generator voltage (L-N)
• Generator voltage (L-L)
• Generator frequency
• Generator current
• kW
• kVA
• kWh
• kVAh
• Power factor
Grid
• Grid voltage (L-N)
• Grid voltage (L-L)
• Grid frequency
Engine
• Turn speed
• Cooling fluid temperature
• Oil pressure
• Hour meter
• Battery voltage
• No. of start-ups
• Fuel level
Protections
• Start-up fault (generator set shutdown)
• High coolant temperature (alarm and generator set
shutdown)
• Low oil pressure (alarm and generator set shutdown)
• Low fuel level (alarm)
• Low cooling fluid level (generator set shutdown)
• Overload (alarm and generator set shutdown)
• Battery voltage high (alarm)
• Battery voltage low (alarm)
• Battery charge alternator failure (alarm)
• Generator low frequency (alarm and shutdown)
• Generator high frequency (alarm and shutdown)
• Generator low voltage (alarm and shutdown)
• Generator high voltage (alarm and shutdown)
• External emergency shutdown (shutdown)
• Engine overspeed (shutdown)
• Maintenance interval (alarm)
www.atlascopco.com/industrial-generator
-
QIS 330 | 400/230 V | 50HZ |
8 / 8
ATSg
Optional cabinet for switching between the grid and the generator set by means of a Socomec brand motorized switch with
an integrated mechanical and electrical interlocking device.
Allows for the padlock locking function. Includes a Manual / Automatic mode selector and emergency manual control.
Safety switching for isolating the loads. High dynamic resistance against short-circuits.
Position indicator with fully visualized cut-off. Stable positions not affected by changes in voltage and mechanical
vibrations. External electrical control of the positions and test sequences.
High number of operations. IP54 protection. Connections: Lower/lower.
ATS 4P 630A 160-333V L-N CCM
3.840
1.470
1.785
2.256
DIMENSIONS AND WEIGHT
Lenght, L (mm)
Width, A (mm)
Height, H (mm)
Weight (kg)
g
PERFORMANCE CLASSg
Execution class in accordance with ISO 8528/5 (2005) taking into account the behaviour of the generator set in a
permanent mode of operation with different load levels, as well as in a temporary mode of operation due to shocks in the
load.
Performance class G2
The generator set has a CE Marking that includes the following directives:
• 2006/42/EC Machine Safety.
• 2014/35/EU Low Voltage.
• 2014/30/EU Electromagnetic compatibility.
• 2005/88/EC Noise emissions of machines outdoors in soundproof generator sets.
Regulation (EU) 2016/1628 Gases and contaminating particles emissions only for groups within its scope of application.
Applicable international regulations:
• ISO 8528
• ISO 3046
• BS 5000
• IEC 60034
REGULATIONg
www.atlascopco.com/industrial-generator
-
24 h. FUEL TANK VERSION
MAINTENANCE SPACE ( 1 : 40 )
COOLING AIR FRONT OUTLET OPTION
CoolingAir Inlet
Cooling Air / Exhaust OUTLET
CoolingAir Inlet
Ed Posi-tion Modified from Date Intr./Appd.
1 2 3 4 5 6 7 8 9
A
10
B
C
D
E
F
G
Parent 3D model Ed . Version 3DCONF
IDEN
TIAL
:Th
is do
cume
nt is
our p
rope
rty an
d sha
ll not
witho
ut ou
r pur
per
miss
ion be
alter
ed,
copie
d, us
ed fo
r man
ufactu
ring o
r com
mun
icated
to a
ny ot
her p
erso
n or
comp
any
03 Se cambia la imagen corporativa para los QIS añadiendo la “Blue Line”19/07/2017 esfpm 02
GC
Fini wt.
Approved.
Treatment
Material
Name
Drawn by
Des checked.
Version Drwg
Scale
Blank wt.
Prod checked.
Family
Blank nr.
Kg Designation Sheet
INV
Replaces
Compare
DateKg
Drawing owner
/
Confidentiality Class
STATUS
Tolerances, if not indicated, according to:
5789,005
Confidential
ESF
acc. to 1102 K
03
DIMENSION DRWG WD (P126)
Thickness:
06/04/2016
A1
1 6
1633032636
daniel navarro
Approved
General tolerances
1350K - mK
TOTAL APROX. WEIGHT with empty tank = 3100 kgCapacity tank : 490 ltrs
3840
MODEL TABLE CD(50 HZ) KVA (60 HZ) KVA (50 HZ) KW (60 HZ) KW
330 300 300 280
9062
0
2263
2620
1455
1335
1456
379
295
1320
555
1285
1:12,5
2620Data Plate
Noise Label
1100
1160
55
1400
9027
0
1913
1100
1224
55
1106
820
1500
1400
1500
1000 1000
17
815370
1184
.5
1184
.585
1.58
1184
.5
700
930 235235
1285
555
1598
927
700
700
-
Ed Posi-tion Modified from Date Intr./Appd.
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
Parent 3D model Ed . Version 3DCONF
IDEN
TIAL
:Th
is do
cum
ent is
our p
rope
rty an
d sha
ll not
witho
ut ou
r per
miss
ion be
alter
ed,
copie
d, us
ed fo
r man
ufactu
ring o
r com
mun
icated
to a
ny ot
her p
erso
n or
com
pany
.
03 Se cambia la imagen corporativa para los QIS añadiendo la “Blue Line” esfpm 163303263619/07/2017 02Fini wt.
Approved.
Treatment
Material
Name
Drawn by
Des checked.
Version Drwg
Scale
Blank wt.
Prod checked.
Family
Blank nr.
Kg Designation Sheet
INV
Replaces
Compare
DateKg
Drawing owner
/
Confidentiality Class
STATUS
Tolerances, if not indicated, according to:
5789,005
Confidential
ESF
acc. to 1102 K
03
DIMENSION DRWG
WD (P126)
Thickness:
06/04/2016
A2
2 6
1633032636
daniel navarro
Approved
1753 1
912
1640
107
960
541.
5
101.6(4")
1:12,5
General tolerances
1350K - mK
90
2620210
865
55
1913
1400
270
1778
17541
778
135
1400
3020
1151
478.
5
gama WD=CEQI 330-300CP 300-280
-
G ( 1 : 25 )
G
Ed Posi-tion Modified from Date Intr./Appd.
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
Parent 3D model Ed . Version 3DCONF
IDEN
TIAL
:Th
is do
cum
ent is
our p
rope
rty an
d sha
ll not
witho
ut ou
r per
miss
ion be
alter
ed,
copie
d, us
ed fo
r man
ufactu
ring o
r com
mun
icated
to a
ny ot
her p
erso
n or
com
pany
.
03 Se cambia la imagen corporativa para los QIS añadiendo la “Blue Line” esfpm 163303263619/07/2017 02Fini wt.
Approved.
Treatment
Material
Name
Drawn by
Des checked.
Version Drwg
Scale
Blank wt.
Prod checked.
Family
Blank nr.
Kg Designation Sheet
INV
Replaces
Compare
DateKg
Drawing owner
/
Confidentiality Class
STATUS
Tolerances, if not indicated, according to:
5789,005
Confidential
ESF
acc. to 1102 K
03
DIMENSION DRWG
WD (P126)
Thickness:
06/04/2016
A2
3 6
1633032636
daniel navarro
Approved
55
86596
0
gama WD=CE 24hQI 330-300CP 300-280
2263
1400
620
9089
0
470 580
1350
2620
18
185 18525
25
3020
1400
478.
5
1151
101.6
-
Ed Posi-tion Modified from Date Intr./Appd.
1 2 3 4 5 6 7 8 9 10
A
B
C
D
E
F
G
Parent 3D model Ed . Version 3DCONF
IDEN
TIAL
:Th
is do
cum
ent is
our p
rope
rty an
d sha
ll not
witho
ut ou
r per
miss
ion be
alter
ed,
copie
d, us
ed fo
r man
ufactu
ring o
r com
mun
icated
to a
ny ot
her p
erso
n or
com
pany
.
03 Se cambia la imagen corporativa para los QIS añadiendo la “Blue Line” esfpm 163303263619/07/2017 02Fini wt.
Approved.
Treatment
Material
Name
Drawn by
Des checked.
Version Drwg
Scale
Blank wt.
Prod checked.
Family
Blank nr.
Kg Designation Sheet
INV
Replaces
Compare
DateKg
Drawing owner
/
Confidentiality Class
STATUS
Tolerances, if not indicated, according to:
5789,005
Confidential
ESF
acc. to 1102 K
03
DIMENSION DRWG
WD (P126)
Thickness:
06/04/2016
A2
4 6
1633032636
daniel navarro
Approved
BATTERIESSWITCH OFF
FUEL PUMP
SPIRAL BATTERY12V Ah-730A
ADDITIONAL FUEL FILTER
General tolerances
1350K - mK
gama WD=CEQIS 330-300CP 300-280
-
J ( 1:10 )
H
J
Ed Posi-tion Modified from Date Intr./Appd.
1 2 3 4 5 6 7 8 9
A
10
B
C
D
E
F
G
Parent 3D model Ed . Version 3DCONF
IDEN
TIAL
:Th
is do
cume
nt is
our p
rope
rty an
d sha
ll not
witho
ut ou
r pur
per
miss
ion be
alter
ed,
copie
d, us
ed fo
r ma n
ufactu
ring o
r com
mun
icated
to a
ny ot
her p
erso
n or
comp
any
03 Se cambia la imagen corporativa para los QIS añadiendo la “Blue Line”19/07/2017 esfpm 02 Fini wt.Approved.
Treatment
Material
Name
Drawn by
Des checked.
Version Drwg
Scale
Blank wt.
Prod checked.
Family
Blank nr.
Kg Designation Sheet
INV
Replaces
Compare
DateKg
Drawing owner
/
Confidentiality Class
STATUS
Tolerances, if not indicated, according to:
5789,005
Confidential
ESF
acc. to 1102 K
03
DIMENSION DRWG
WD (P126)
Thickness:
06/04/2016
A1
6 6
1633032636
daniel navarro
Approved
QIS (WD) salida front 24h
700
930
1170
235235
2263
3840
1400
2620
1350
182525
785 435
1320
295
145
1220
55
2193
373
353 354 353
374
373
1160
1100
20 20
2020
700
930
100
360
12