QE and polarization measurements of samples with grid as a function of bias voltage

5
1. QE and polarization measurements of samples with grid as a function of bias voltage 2. Tantalum ring with smaller hole in place 3. Comparison with previous results Cathode R&D 04/26/06

description

Cathode R&D 04/26/06. QE and polarization measurements of samples with grid as a function of bias voltage Tantalum ring with smaller hole in place Comparison with previous results. AlGaAs/GaAs SL, 784nm laser illumination, no grid. -. -. - PowerPoint PPT Presentation

Transcript of QE and polarization measurements of samples with grid as a function of bias voltage

Page 1: QE and polarization measurements of samples with grid as a function of bias voltage

1. QE and polarization measurements of samples with grid as a function of bias voltage

2. Tantalum ring with smaller hole in place3. Comparison with previous results

Cathode R&D 04/26/06

Page 2: QE and polarization measurements of samples with grid as a function of bias voltage

AlGaAs/GaAs SL, 784nm laser illumination, no grid

- -

Page 3: QE and polarization measurements of samples with grid as a function of bias voltage

IQE 100nm GaAs, 5x10^16cm-3, 784nm laser illumination, 4x16m grid

Page 4: QE and polarization measurements of samples with grid as a function of bias voltage

Tantalum rings

12mm

2

Page 5: QE and polarization measurements of samples with grid as a function of bias voltage

Conclusions

• Wait for the thick grid samples (~1mm thick metal grid) by May 10.

• Expect the InGaAs/GaAs samples from SVT this week.