QATAR GEOTECHNICAL & ENVIRONMENTAL CO. · 3.25 Concrete BS EN 12390 -1 Testing hardened concrete....

This is to attest that

QATAR GEOTECHNICAL & ENVIRONMENTAL CO. ST. NO. 18, GATE NO. 56, INDUSTRIAL AREA

P.O. BOX NO. 22054 DOHA

QATAR

Testing Laboratory TL-452

has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance with ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation maintained on the IAS website (www.iasonline.org).

This certificate is effective date and valid up to May 1, 2021.

This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See www.iasonline.org for current accreditation information, or contact IAS at 562-364-8201.

Raj Nathan President

http://www.iasonline.org/




International Accreditation Service, Inc.

3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A. Telephone +1 562-364-8201 — [email protected]

www.iasonline.org Page 1 of 29

IAS Accreditation Number TL-452 Company Name Qatar Geotechnical & Environmental Co Address ST NO 18, Gate NO 56, Industrial Area

P.O. Box NO 22054 Doha, Qatar

Contact Name Basim Al Disi, General Manager Darwin Jordas Gongob, QA/QC Manager Mohamed Abdel Rahman Subuh Laboratory Manager Cyrone Castellano Divinagracia Senior Laboratory Technician

Telephone +974 4450-1473 Effective Date of Scope July 18, 2019 Accreditation Standard ISO/IEC 17025: 2005

S.N PWA No. Category Standard/ Method No.

/Date

Standard/Method Title & Section

Location / Facility Authorized Technicians

1. 2.04 Aggregate ASTM C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

St. 18, Gate 56 Doha

Cyrone Divinagracia Joseph Panlilio Randy Salas

2. 2.06 Aggregate ASTM C127 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate


Mohd. Gias Uddin Cyrone Divinagracia Jon Pol Balagtas Jeffrey Aguilar

3. 2.05 Aggregate ASTM C128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate


Mohd. Gias Uddin Cyrone Divinagracia Jon Pol Balagtas Jeffrey Aguilar

http://www.ilac.org/



mailto:[email protected]







TL-452 Page 2 of 29 Qatar Geotechnical & Environmental Co


/Date



4. 2.11 Aggregate ASTM C131/C131M Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

St. 18,Gate 56 Doha

Cyrone Divinagracia Joseph Panlilio Jeffreryl Cabahug

5. 2.03 Aggregate ASTM C136/C136M Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

St. 18,Gate 56 Doha

Cyrone Divinagracia Jobert Peralta Darwin Diaz

6. 2.07 Aggregate ASTM C142/C142M - 17

Standard Test Method for Clay Lumps and Friable Particles in Aggregates


Cyrone Divinagracia Jobert Peralta Randy Salas

7. 2.12 Aggregate ASTM C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine


Jeffrey Aguilar Jefferyl Cabahug Aldrin Quiming

8. 2.99 Aggregate ASTM C1252 Standard Test Method for Uncompacted Void Content of Fine Aggregate (as influenced by particle shape, surface texture, and grading)


Cyrone Divinagracia Mohd. Gias Uddin Jeffrey Aguilar

9. 2.01 Aggregate ASTM D75/D75M Standard Practice for Sampling of Aggregates


Cyrone Divinagracia Mohd. Gias Uddin Randy Salas

10. 2.14 Aggregate ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate


Cyrone Divinagracia Jeffrey Aguilar Jefferyl Cabahug Mohd. Gias Uddin Jon Pol Balagtas



/Date



11. 2.18 Aggregate BS 812-109, Sec. 6.0

Testing aggregates - Part 109: Methods for determination of moisture content Sec. 6 Definitive, oven-drying method


Cyrone Divinagracia Randy Salas Mohd. Gias Uddin

12. 2.33 Aggregate BS 812-110 Testing aggregates - Part 110: Methods for determination of aggregate crushing value (ACV)


Cyrone Divinagracia Mohd. Gias Uddin Joseph Panlilio

13. 2.23/2.26/2.27 Aggregate BS EN 933-1 Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method

St. 18,Gate 56 Doha

Cyrone Divinagracia Randy Salas Jobert Peralta

14. 2.29 Aggregate BS EN 933-3:2012 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index


Randy Salas Mohd. Gias Uddin Jeffrey Aguilar

15. 2.09 Aggregate/ Chem ASTM C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete


Sabina Aysha Dkhilalli Hichem

16. 2.13 Aggregate/ Chem ASTM C88 Standard Test Method for Soundness of Aggregates by the use of Sodium Sulfate or Magnesium Sulfate


Randy Salas Mohd. Gias Uddin Jeffrey Aguilar Jon Pol Balagtas Darwin Diaz

17. 2.08 Aggregate/ Chem ASTM C123/C123M Standard Test Method for Lightweight Particles in Aggregates


Cyrone Divinagracia Jeffrey Aguilar Mohd. Gias Uddin Darwin Diaz



/Date



18. 2.99 Aggregate/ Chem ASTM C289 Standard Test Method for Potential Alkali- Silica Reactivity of Aggregates (Chemical Method)



19. 2.37 Aggregate/ Chem BS 812-117 Testing Aggregates-Part 117 Method for Determination of Water-Soluble Chloride Salts



20. 2.38/2.39 Aggregate/ Chem BS 812-118 Testing Aggregates-Part 118 Methods for Determination of Sulphate Content

St. 18,Gate 56 Doha


21. 3.01 Concrete ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field


Mohd. Gias Uddin Jeffrey Aguilar Jobert Peralta

22. 3.05 Concrete ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens



23. 3.08 Concrete ASTM C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete



24. 3.99 Concrete ASTM C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)



25. 3.14 Concrete ASTM C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete





/Date



26. 3.04 Concrete ASTM C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete


Cyrone Divinagracia Mohd. Gias Uddin Jobert Peralta

27. 3.02 Concrete ASTM C172/C172M Standard Practice for Sampling Freshly Mixed Concrete



28. 3.13 Concrete ASTM C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

St. 18,Gate 56 Doha

Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jobert Peralta Riyas Waise

29. 3.12 Concrete ASTM C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method



30. 3.16 Concrete ASTM C900 Standard Test Method for Pullout Strength of Hardened Concrete


Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar

31. 3.03 Concrete ASTM C1064/C1064M

Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete


Mohd. Gias Uddin Jeffrey Aguilar Danny Labastida

32. 3.11 Concrete ASTM C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration


Mohd Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jobert Peralta

33. 3.30 Concrete BS 1881-122 Testing concrete. Method for determination of water absorption

St. 18,Gate 56 Doha

Cyrone Divinagracia Mohd Gias Uddin Jeffrey Aguilar



/Date



34. 3.99 Concrete BS EN 1542 Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off


Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar

35. 3.21 Concrete BS EN 12350-1 Testing fresh concrete. Sampling of Fresh Concrete


Modh. Gias Uddin Jeffrey Aguilar Jobert Peralta

36. 3.23 Concrete BS EN 12350-2 Testing fresh concrete. Slump-test


Mohd. Gias Uddin Jobert Peralta Rey Oliva Jeffrey Aguilar Riyas Waise

37. 3.99 Concrete BS EN 12350-7 Testing fresh concrete. Air content. Pressure methods


Mohd. Gias Uddin Jobert Peralta Danny Labastida

38. 3.25 Concrete BS EN 12390-1 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds


Mohd. Gias Uddin Jobert Peralta Jeffrey Aguilar

39. 3.22 Concrete BS EN 12390-2 Testing hardened concrete - Part 2: Making and curing specimens for strength tests


Mohd. Gias Uddin Jeffrey Aguilar Danny Labastida

40. 3.26 Concrete BS EN 12390-3 Testing hardened concrete. Compressive strength of test specimens


Mohd. Gias Uddin Jobert Peralta Rey Oliva

41. 3.27 Concrete BS EN 12390-7 Testing hardened concrete. Density of hardened concrete



42. 3.29 Concrete BS EN 12390-8 Testing hardened concrete. Depth of penetration of water under pressure





/Date



43. 3.28 Concrete BS EN 12504-1 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression


Mohd. Gias Uddin Jeffrey Aguilar Darwin Diaz

44. 3.33 Concrete/ Chem BS 1881-124, Sec.10.2

Testing Concrete. Methods for Analysis of Hardened Concrete Sec.10.2 Determination of Chloride Content



45. 3.34 Concrete/ Chem BS 1881-124, Sec.10.3

Testing Concrete. Methods for Analysis of Hardened Concrete Sec.10.3 Determination of Sulphate Content



46. 9.03 Environmental Tests APHA 2130 B Turbidity St. 18, Gate 56 Doha


47. 9.73 Environmental Tests APHA 2320 B Alkalinity - Titration method (Bicarbonate)

St. 18, Gate 56 Doha / Environmental Section


48. 9.74 Environmental Tests APHA 2320 B Alkalinity - Titration method (Carbonate)



49. 9.72 Environmental Tests APHA 2320 B Alkalinity - Titration method (Phenolphthalein Alkalinity)



50. 9.71 Environmental Tests APHA 2320 B Alkalinity - Titration method (Total Alkalinity)



51. 9.35 Environmental Tests APHA 2340 C Total Hardness St. 18, Gate 56 Doha / Environmental Section




/Date



52. 9.02 Environmental Tests APHA 2510 B Electrical Conductivity St. 18, Gate 56 Doha


53. 9.99 Environmental Tests APHA 2520 B Salinity St. 18, Gate 56 Doha


54. 9.04 Environmental Tests APHA 2540 B Standard Methods for the Examination of Water and Wastewater: Total Solids Dried at 103 - 105 C



55. 9.08 Environmental Tests APHA 2540 C Standard Methods for the Examination of Water and Wastewater: Total Volatile Dissolved Solids Dried at 103 -105 C



56. 9.05 Environmental Tests APHA 2540 D Total Suspended Solid St. 18, Gate 56 Doha


57. 9.06 Environmental Tests APHA 2540 D Standard Methods for the Examination of Water and Wastewater: Total Volatile Suspended Solids at 189 C

St. 18,Gate 56 Doha / Environmental Section


58. 9.99 Environmental Tests APHA 2540 E Standard Methods for the Examination of Water and Wastewater: Fixed and volatile solids ignited at 550 C



59. 9.09 Environmental Tests APHA 2540 F Standard Methods for the Examination of Water and Wastewater: Settleable Solids



60. 9.44 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (As)





/Date



61. 9.56 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Be)



62. 9.39 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Ca)



63. 9.45 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Cd)



64. 9.47 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Co)



65. 9.46 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Cr)



66. 9.68 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Cr) (VI)



67. 9.48 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Cu)



68. 9.42 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Fe)



69. 9.66 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Hg)





/Date



70. 9.65 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Li)



71. 9.38 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Mg)



72. 9.58 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Mn)



73. 9.59 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Mo)



74. 9.49 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Ni)



75. 9.64 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Pb)



76. 9.54 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Sb)



77. 9.60 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Se)



78. 9.99 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Sr)





/Date



79. 9.62 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Ti)



80. 9.61 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Tl)



81. 9.63 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (V)



82. 9.51 Environmental Tests APHA 3120-B Metals by Plasma Emission Spectroscopy - ICP Method (Zn)



83. 9.36 Environmental Tests APHA 3500-Ca B Calcium St. 18, Gate 56 Doha / Environmental Section


84. 9.37 Environmental Tests APHA 3500 Mg Magnesium Conc.(calculation)



85. 9.23 Environmental Tests APHA 4500 Cl B Residual Chlorine St. 18,Gate 56 Doha / Environmental Section


86. 9.24 Environmental Tests APHA 4500 Cl - B Chloride - Argentometric Method



87. 9.34 Environmental Tests APHA 4500 F- D Standard Methods for the Examination of Water and Wastewater: SPADNA Method for Fluoride





/Date



88. 9.01 Environmental Tests APHA 4500 H+B pH Value St. 18, Gate 56 Doha


89. 9.18 Environmental Tests APHA 4500 NH3 F Ammonia Nitrogen St. 18, Gate 56 Doha / Environmental Section


90. 9.20 Environmental Tests APHA 4500 NO2- B Standard Methods for the Examination of Water and Wastewater: Nitrite Nitrogen



91. 9.19 Environmental Tests APHA 4500 NO3- B Standard Methods for the Examination of Water and Wastewater: Ultraviolet Spectrophotometric Screening Method for Nitrate Nitrogen



92. 9.29 Environmental Tests APHA 4500 P D Total Phosphorous St. 18, Gate 56 Doha / Environmental Section


93. 9.33 Environmental Tests APHA 4500 S2- F Sulphide St. 18, Gate 56 Doha / Environmental Section


94. 9.26 Environmental Tests APHA 4500 SO42- C Sulfate St. 18,

Gate 56 Doha / Environmental Section


95. 9.21 Environmental Tests APHA 5520 B Oil and Grease St. 18, Gate 56 Doha / Environmental Section


96. 9.30 Environmental Tests APHA 5530 C Phenol Concentration St. 18, Gate 56 Doha / Environmental Section




/Date



97. 9.99 Environmental Tests ASTM E415 Chemical composition of steel (30 Elements)



98. 9.99 Environmental Tests HACH Method 8000

Chemical Oxygen Demand (3 – 1500 mg/L)

St. 18,Gate 56 Doha / Asphalt Section

Sabina Aysha Dkhilalli Hichem Murali Manoha

99. 8.10 Geotechnical ASTM D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force


Cyrone Divinagracia Jeffrey Aguilar Mohd. Gias Uddin

100. 8.03 Geotechnical ASTM D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications


Cyrone Divinagracia Darwin Diaz Aldrin Quiming

101. 8.05 Geotechnical ASTM D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures


Cyrone Divinagracia Darwin Diaz Mohd. Gias Uddin

102. 8.20 Geotechnical ASTM G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method


Mohamed Sayed El Sayed Mamdouh



/Date



103. 8.08 Geotechnical BS 1377-7, Sec. 4.5.4

Methods of test for soils for civil engineering purposes. Part &. Shear strength tests (total stress) Sec. 4.5.4 Shearing: single stage tests.


Cyrone Divinagracia Jeffrey Aguilar Jefferyl Cabahug

104. 8.19 Geotechnical BS 1377-9, Sec. 3.3, EN ISO 22476-3:2005+A1

Geotechnical investigation and testing. Field testing. Standard penetration test


Mahmoud Sami Wael Mostafa

105. 8.21 Geotechnical BS 1377-9, Sec. 4.1

Methods of test for Soils for civil engineering purposes Part 9. In-situ tests Sec. 4.1. Determination of vertical deformation and strength characteristics of soil by plate loading test.



106. 8.22 Geotechnical BS 1377-9, Sec. 4.3

Methods of test for Soils for civil engineering purposes Part 9. In-situ tests Sec. 4.3. Determination of In-situ California Bearing Ratio (CBR)



107. 8.01 Geotechnical BS 5930, Sec. 6 Code of practice for ground investigations


Mahmoud Sami Mohamed Sayed

108. 8.14 Geotechnical BS 5930, Cl. 22 Code of practice for ground investigations (Sampling of Soil)


Mohamed Beidas Mahmoud Sami

109. 8.15 Geotechnical BS 5930, Cl.23 Code of practice for ground investigations (Sampling of Ground Water)


Mohamed Beidas Mahmoud Sami



/Date



110. 8.16 Geotechnical BS 5930, Cl. 23, 27, 47

Code of practice for ground investigations (Ground Water Level Measurement)


El Sayed Mamdouh Mahmoud Sami

111. 8.17 Geotechnical BS 5930, Cl. 25 Code of practice for ground investigations (Falling Head Permeability Test)

St. 18,Gate 56 Doha

El Sayed Mamdouh Mohamed Beidas

112. 8.18 Geotechnical BS 5930:2015 Cl. 25

Code of practice for ground investigations (Packer Test)


Mahmoud Sami Mohamed Beidas

113. 8.06 Geotechnical BS EN ISO 17892-5, Sec. 3

Geotechnical investigation and testing. Laboratory testing of soil. Incremental loading oedometer test Part 5. Compressibility, Permeability and Durability tests Sec. 3. Determination of the one- dimensional consolidation properties





/Date



114. 4.05 Masonry Blocks and Paving Unit

BS EN 771-3:2011+A1 & BS EN 772-11

Specification for masonry units. Aggregate concrete masonry units (Dense and lightweight aggregates) Methods of test for masonry units. Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units


Mohd. Gias Uddin Jeffrey Aquilar Jobert Peralta


BS EN 772-1:2011+A1

Methods of test for masonry units. Determination of compressive strength


Mohd. Gias Uddin Jeffrey Aquilar Jobert Peralta


BS EN 1338, Annex C

Concrete Paving Blocks - Requirements and Test Methods / Measurement of Dimensions of a single block

St. 18, Gate 56 Doha / Concrete Section

Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jobert Peralta


BS EN 1338, Annex E

Concrete Paving Blocks - Requirements and Test Methods / Determination of Total Water Absorption




BS EN 1338, Annex F

Concrete Paving Blocks - Requirements and Test Methods / Measurement of Strength





/Date




BS EN 1339, Annex E

Concrete Paving Flags - Requirements and Test Methods / Determination of Total Water Absorption




BS EN 1339, Annex F

Concrete Paving Flags - Requirements and Test Methods / Measurement of Bonding Strength and Breaking Load




BS EN 6717, Annex B

Precast, Unreinforced concrete paving blocks - Requirements and Test methods /Measurement of Dimensions of a single Paving Block




BS EN 6717, Annex E

Precast, Unreinforced concrete paving blocks - Requirements and Test methods / Method for measuring tensile splitting strength




BS EN 13748-1 Terrazzo Tiles. Terrazzo Tiles For Internal Use



124. 10.04 NDT ASTM C805/C805M Standard Test Method for Rebound Number of Hardened Concrete


Mohd Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jobert Peralta

125. 10.05 NDT BS 1881-204 Testing concrete. Recommendations on the use of electromagnetic covermeters



126. 10.06 NDT BS EN 12504-4 Testing concrete. Determination of ultrasonic pulse velocity





/Date



127. 10.08 NDT Microscope Manual Crack Measurement Microscope



128. 6.99 Road & Pavement ASTM D88 Standard Test Method for Saybolt Viscosity


Mark Panlilio Darwin Francisco

129. 6.07 Road & Pavement ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

St. 18, Gate 56 Doha / Asphalt Section

Gardy Punu Mark Panlilio Darwin Francisco

130. 6.08 Road & Pavement ASTM D113 Standard Test Method for Ductility of Bituminous Materials


Gardy Punu Mark Panlilio Darwin Francisco

131. 6.01 Road & Pavement ASTM D140/D140M

Standard Practice for Sampling Asphalt Materials


Randy Salas Mark Panlilio Darwin Francisco

132. 6.02 Road and Pavement ASTM D402/402M Standard Test Method for Distillation of Cutback Asphalt




Standard Practice for Sampling Bituminous Paving Mixtures




Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures




Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures


Darwin Diaz Gardy Punu Riyas Waise Jonathan Salvador



/Date




Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures


Nemencio Morales Mark Panlilio Darwin Francisco

137. 6.16 Road & Pavement ASTM D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling- Thin-Film Oven Test)



138. 6.03 Road and Pavement ASTM D2995 Application Rate Bituminous Distributors

Field Mark Panlilio Darwin Francisco Gardy Punu


Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens


Mark Panlilio Nemencio Morales Neil Andrada

140. 6.23 Road and Pavement ASTM D5361/D5361M

Sampling Compacted Bituminous Mixtures for Laboratory Testing

Field Mark Panlilio Darwin Francisco Gardy Punu

141. 6.34 Road & Pavement ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate


Gardy Punu Darwin Diaz Jonathan Salvador

142. 6.31 Road and Pavement Test

ASTM D5581 Resistance for Plastic Flow Using Marshall Apparatus (6 in. Diameter Specimen)


Mark Panlilio Darwin Francisco Gardy Punu

143. 6.33 Road & Pavement ASTM D6307 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method



144. 6.15 Road & Pavement ASTM D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)





/Date



145. 6.13 Road & Pavement ASTM D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)


Darwin Diaz Mark Panlilio Darwin Francisco

146. 6.99 Road & Pavement ASTM D6925 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor



147. 6.24 Road and Pavement ASTM D6926 Preparation of Specimens Using Marshall Apparatus



148. 6.30 Road & Pavement ASTM D6927 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures



149. 6.40 Road and Pavement Test

ASTM D6931 Indirect Tensile (IDT) Strength of Bituminous Mixtures



150. 6.19 Road and Pavement ASTM D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt



151. 6.14 Road & Pavement ASTM D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer


Darwin Diaz Mark Panlilio Darwin Francisco

152. 6.62 Road & Pavement BS EN 1426, BS 2000-49

Bitumen and bituminous binders. Determination of needle penetration





/Date



153. 6.50 Road & Pavement BS EN 12697-1 Bituminous mixtures - Test methods for hot mix asphalt Part 1: Soluble binder content


Gardy Punu Darwin Diaz Jonathan Salvador Riyas Waise

154. 6.51 Road & Pavement BS EN 12697-2 Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Determination of particle size distribution


Gardy Punu Darwin Francisco Darwin Diaz Jonathan Salvador

155. 6.53 Road & Pavement BS EN 12697-6 Bituminous mixtures - Test methods for hot mixes asphalt Part 6: Determination of Bulk Density of Bituminous Specimen



156. 6.60 Road & Pavement BS EN 12697-36 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement



157. 6.61 Road & Pavement BS EN 12697-39 Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition



158. 1.01 / 2.02 Soil ASTM C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size



159. 1.99 Soil ASTM D422 Standard Test Method for Particle Size Analysis of Soils


Cyrone Divinagracia Jeffrey Aguilar Randy Salas

160. 1.04 Soil ASTM D1140 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing





/Date



161. 1.08 Soil ASTM D1556/D1556M

Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method



162. 1.06 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))


Cyrone Divinagracia Jeffrey Aguilar Mohd. Gias Uddin Jon Pol Balagtas Aldrin Quiming

163. 1.11 Soil ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils


Cyrone Divinagracia Jeffrey Aguilar Jobert Peralta

164. 1.02 Soil ASTM D2216 Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass



165. 1.13 Soil ASTM D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate


Cyrone Divinagracia Jefferyl Cabahug Jeffrey Aguilar Mohd. Gias Uddin Jon Pol Balagtas Riyas Waise

166. 1.99 Soil ASTM D4253 Standard Test Methods for Maximum Size Index Density and Unit Weight of Soils Using a Vibratory Table.


Cyrone Divinagracia Randy Salas Jeffrey Aguilar

167. 1.99 Soil ASTM D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density


Cyrone Divinagracia Randy Salas Jeffrey Aguilar



/Date



168. 1.05 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils


Cyrone Divinagracia Jeffrey Aguilar Mohd. Gias Uddin Jon Pol Balagtas

169. 1.12 Soil ASTM D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place


Cyrone Divinagracia Jeffrey Aguilar Jefferyl Cabahug

170. 1.07 Soil ASTM D4718/D4718M

Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles


Cyrone Divinagracia Jeffrey Aguilar Darwin Diaz

171. 1.10 Soil ASTM D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester.


Cyrone Divinagracia Mohd. Gias Uddin Jeffreryl Cabahug

172. 1.03 Soil ASTM D6913/D6913M

Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis


Cyrone Divinagracia Jeffrey Aguilar Aldrin Quiming

173. 1.99 Soil ASTM D7830/D7830M

Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using and Electromagnetic Soil Density Gauge


Mohd. Gias Uddin Jeffrey Aguilar Randy Salas Joseph Panlilio Jon Pol Balagatas



/Date



174. 1.14 Soil BS 1377-2, Sec.3.2

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 3.2 Determination of moisture content by Oven-drying method


Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jefferyl Cabahug Aldrin Quiming

175. 1.15 Soil BS 1377-2, Sec. 4.3

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 4.3 Cone penetrometer method (definitive method)


Cyrone Divinagracia Jeffrey Aguilar Jon Pol Balagtas

176. 1.16 Soil BS 1377-2, Sec.4.5

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 4.5 Determination of liquid limit by Casagrande apparatus method


Mohd. Gias Uddin Cyrone Divinagracia Jeffrey Aguilar Jon Pol Balagtas

177. 1.17 Soil BS 1377-2, Sec.5.0

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 5.0 Determination of the plastic limit and plasticity index



178. 1.99 Soil BS 1377-2, Sec. 8.3

Methods of test for Soils for civil engineering purposes Part 2: Classification tests; Sec. 8.3 Small pyknometer method





/Date



179. 1.99 Soil BS 1377-2, Sec. 8.4

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 8.4 Large pyknometer method

St. 18,Gate 56 Doha


180. 1.18 Soil BS 1377-2, Sec. 9.2

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 9.2 Wet sieving method



181. 1.19 Soil BS 1377-2, Sec. 9.3

Methods of test for Soils for civil engineering purposes - Part 2: Classification tests; Sec. 9.3 Dry sieving method



182. 1.99 Soil BS 1377-2, Sec.9.5

Methods of test for Soils for civil engineering purposes Part 2. Classification tests; Sec. 9.5 Determination of particle density by sedimentation by the hydrometer method



183. 1.25 Soil/Chem. BS 1377-3, Sec. 3 Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 3. Determination of Organic Matter Content





/Date



184. 1.99 Soil/Chem. BS 1377-3, Sec. 4 Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 4.0 Determination of Mass loss in Ignition



185. 1.99 Soil/Chem. BS 1377-3, Sec.5.0 / 5.6

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 5.0/5.7 Determination of Sulphate Content of Soil and Ground Water/Ion- exchange Method for Analysis of Water Extract or Ground Water



186. 1.29 Soil/Chem. BS 1377-3, Sec.5.2

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; 5.2 Preparation of Soil and its Acid Extract



187. 1.28 Soil/Chem. BS 1377-3, Sec. 5.3 / 5.5

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 5.3. Preparation of soil and its water extract and Sec. 5.5 Gravimetric methods for analysis of acid water extract or ground water.





/Date



188. 1.99 Soil/Chem. BS 1377-3, Sec. 6.0 / 6.3

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 6. Determination of the carbonate content, Sec. 6.2 Preparation of the sample and Sec. 6.3. Rapid titration method



189. 1.26 Soil/Chem. BS 1377-3, Sec.7.2

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec. 7.2 Determination of Water Soluble Chloride Content

St. 18,Gate 56 Doha


190. 1.27 Soil/Chem. BS 1377-3, Sec.7.3 / 5.5

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; Sec 7.3/5.5 Determination of Acid-Soluble Chloride Content / Gravimetric method for analysis of acid or water extract or ground water



191. 1.99 Soil/Chem. BS 1377-3, Sec. 9.0

Methods of test for Soils for civil engineering purposes Part 3. Chemical and electro-chemical tests; 9. Determination of the pH value





/Date



192. 1.20 Soil BS 1377-4, Sec. 3.5/3.6

Methods of test for Soils for civil engineering purposes Part 4. Compaction related tests Sec. 3. Determination of Dry Density/Moisture content relationship


Cyrone Divinagracia Joseph Panlilio Darwin Diaz

193. 1.21 Soil BS 1377-4, Sec. 7 Methods of test for Soils for civil engineering purposes Part 4. Compaction related tests; Sec. 7. Determination of the California Bearing Ratio (CBR)


Cyrone Divinagracia Randy Salas Jeffreryl Cabahug

194. 1.23 Soil BS 1377-9, Sec. 2.2

Methods of Test for Soils for Civil Engineering Purposes Part 9: In-situ Tests Sec. 2.2 Sand Replacement Method Suitable for Fine, Medium, and Coarse Grained-Soils (Large Pouring Cylinder Method)


Cyrone Divinagracia Joseph Panlilio Jeffrey Aguilar

195. 7.02 Steel ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

St. 18,Gate 56 Doha


196. 7.03 Steel BS 4449:2005+A3 Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification (bent Test)





/Date



197. 7.04 Steel BS 4449:2005+A3 Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification (Rebend Test)



198. 7.01 Steel BS EN 10002-1, ISO 6892-1

Metallic materials. Tensile testing. Part 1: Method of test at room temperature



QATAR GEOTECHNICAL & ENVIRONMENTAL CO. · 3.25 Concrete BS EN 12390 -1 Testing hardened concrete....

Documents

Transcript of QATAR GEOTECHNICAL & ENVIRONMENTAL CO. · 3.25 Concrete BS EN 12390 -1 Testing hardened concrete....