www.mcclintonenergy.com

QQ QUALITY SERVICEQUALITY PRODUCTSQUALITY PERSONNEL

QQ QUALITY SERVICEQUALITY PRODUCTSQUALITY PERSONNEL

uality Service, is the pinnacle of our business. Our service is one of the most important aspects of the job, that has separated us from the competition. We take pride in providing our customers with quality service and always investigate the opportunity for improvement.

uality Products, are what our customers expect and demand. Our products and tools meet or exceed all API requirements to satisfy the needs of our most demanding customers. Multiple testing procedures ensure performance and safety on all of our projects.

uality Personnel, is essential to providing the service and products that our customers have come to trust. Our personnel strive to influence our company, customer, community and fellow employee to be the best we can be each day. Our employees receive the highest standard of training and tools to perform their task safely and with confidence.

QQ

QQ

QQ

“ We don’t aspire to be the largest company in the industry, simply, be the best”.

W e l l h e a d

P r o d u c t i o n

Frac Tree Rental

C o m p o s i t e

F r a c P l u g

I n n o v a t i o n

D r i l l o u t s

F l o w b a c k

C o i l Tubing

Frac Spread

Pump Services

Water Transfer

Page 4

Page 12

Page 15

Page 21

3

3

About Us

McClinton Energy Group and its subsidiaries have been providing top quality equipment and service that is second to none nationwide for 7 years, and is still going strong. We are committed to being a leading provider of oilfield services and products through a comprehensive approach of providing Service Quality. We accomplish this, not only in the way that the services are performed at the wellsite, but also in the way in which they are evaluated, analyzed, managed and performed.

McClinton Energy Group has 14 facilities nationwide to serve all of the major oil and natural gas plays. From composite frac plugs to time-saving wellhead equipment designs, we provide many innovative and time saving technologies designed specifically to lower operating costs for our customers.

McClinton Energy Group looks forward to the opportunity to serve your wellhead supply and oilfield service needs!

4

4

McClinton Energy Group sells, installs and services most types of wellhead products.

Our field and service personnel are available 24 hrs a day to handle your wellhead needs.

Conventional Wellhead Multi-Bowl Systems SWECO QuickLock Drilling Flange System Production Trees Drilling Manifolds Frac Stacks Field Greasing Field Pressure Testing

From drilling to production, McClinton Energy Group has the equipment and service personnel to handle your needs and pressures.

Wellhead Equipment

ProductionEquipment

5

5

McClinton Energy Group carries a complete line of conventional wellhead components available for quick delivery.

Positive and Adjustable Chokes are designed for reliable flow control and maximum wear life. McClinton Energy’s chokes are available in flanged or threaded ends, bore sizes from 1-13/16” through 4-1/16” nominal sizes, working pressures of 2,000 PSI through 15,000 PSI and standard or special trim options.

B-1 Tubing Head AdapterB2P Tubing Head AdapterA5P-EN Tubing Head AdapterBO-2 Tubing Head AdapterBHTA Tree CapsTeesCrosses

All available in flange sizes 2-1/16” through 7-1/16” with working pressures of 2,000 PSI through 15,000 PSI. Sizes available in 410 stainless steel.

McClinton Energy offers a wide variety of companion flanges. Most standard sizes 1-13/16” through

7-1/6” in working pressures of 2,000 PSI through 15,000 PSI. Additional

types, blind and weld neck, are also available. Many sizes are available

in 410 stainless steel.

Casing Hangers - SW-22, SW-29 and SW-21PTubing Hangers - TC1B, TC1A, TC1A-EN and TC1W

Secondary Seals - SWI-PE Seal, SWI-HP-PE Seal SWI-0-2/4-0 Bushing

Conventional Wellhead

Actuation Adaptable, OEM interchangeable and API 6A PSL 1 through 4

6

6

QuickLock Adapterw/2 BP Pins

Lock Ring

Conventional Threaded Bottom

Casing Head

Fluted Landing Ring

Support Ring

Conductor Pipe Surface Casing

QuickLock Wellhead SystemBenefits

• Reliable Conventional Equipment

• Field Proven Sealing Design

• Rig Time Savings

• Safe, Fast Nipple Up, Nipple Down

• Standard C-22 Test Plug

Using the QuickLock adapter, The BOP can be made-up fast and safely to the casing head. The adapter is also equipped with two locking pins to allow for the use of a wear bushing.

This System Allows a Fluted Mandrelor Slips to be Used.

7

7

Multibowl Wellhead System

Benefits

• Standard Off-the-Shelf Casing Head

• Lower Profile Solution

• Common Support Bushing

• Field Proven Sealing Designs

• FS Seals require No Plastic Packing

• C-29 Profile = Standard Off-the-Shelf Slips

• Removable Upper Section = Improved Asset Management

• Rig Time Savings

Our multi-bowl wellhead design allows

multiple casing strings to be hung in a single

wellhead component without having to

break the BOP. This saves installation time

and reduces footprint. This system is easily

configured and can be adapted for the most

standard or complex environments.

A full array of service tools to support this

product line is available; including test plugs,

wear bushings, running tools, and casing

hanger installation tools.

Standard Casing Head

Fluted Mandrel Casing Hanger

Packoff Assembly

Multi-Bowl Spool

Discover More

8

8

Quickset Wellhead

Benefits

• The Quickset Wellhead Assembly comes fully assembled and pre-tested for fast and simple installation

• Assembly can be easily installed through the rotary door

• Wellhead Assembly can be swiveled after being set for easy orientation before locking in place

• Same field proven sealing designs and low profile as our Multi-Bowl Wellhead System

Through the innovation of a patent pending

casing head design, our Quickset Wellhead

System saves rig time by allowing a pre-

assembled and tested assembly to be

installed on the surface casing without

needing to be welded on.

This system also utilizes the same time

saving features of our Multi-Bowl Wellhead

system, adding to rig time savings which

translate into greatly reduced operating

costs.

Quickset Casing head

Bolt secures Lockring in the Landing MandrelLanding

Mandrel

Fluted Landing RIng

Surface Casing Collar

Conductor Pipe

Support Ring

Discover More

9

9

Frac Valve Rentals - Sales* & Service

Frac Valve Inventory

• Texas - Odessa, Joshua, Houston* and Victoria• Oklahoma - Norman, Oklahoma City*• Colorado - Johnstown, Denver*• Wyoming - Casper• New York - Elmira• Ohio - Canton, Marietta• Pennsylvania - Perryopolis

SWECO Boasts one of the largest frac inventories in the nation, featuring:

• 1-13/16” through 7-1/16” Bores

• 5,000 PSI thru 15,000 Working Pressures

• 7-1/16” Large Bore Valves feature “EZ Torque” Ball Screws

• API 6A Material Class DD/EE and TempClass P to U

• Zipper Frac Manifolds

Frac Equipment

10

10

McClinton Energy Group offers complete valve service and repair of customer property. Our qualified valve technicians can trouble shoot and repair most valves in the market today.

Valves can be serviced in shop or on customer location.

Drilling Choke Manifolds w/ Console

Casing Hanger Installation

Frac SleeveIsolation System Installation

McClinton Energy Group offers complete field service to handle our customer needs.• Installation

◊ Frac Equipment◊ Slips / Casing Hangers◊ Back Pressure Valves◊ Production Trees

• Greasing Programs

• Field Testing• Flowback• Plug Catchers• Trouble Shooting• Crane Truck Service• Maintenance Programs

Services

11

11

McClinton Energy Group has secured manufacturing facilities overseas, bringing the group an international status. This includes not only the manufacture of parts from tempered material, but also foundry services allowing us to be part of the QA/QC manufacturing process from the smelting and casting of raw materials, to the final coat of paint on each product. This allows us to ensure a level of quality second to none in our products and deliver them to our customers at more competitive prices.

This overseas expansion of McClinton Energy Group is just another example of how we are consistently evolving to improve our process and products in an effort to better serve our customers around the globe.

12

12

Mustang Series Frac Plug

Unique Composite

Faster Drill-out

Casing Sizes:4-½"5", 5-½"

Ball Drop Cage Ball Bridge

Casing Specs Plug Specs Operating Range

SizeWeight Range

(lb)

Casing Min. ID

(in)

Casing Max. ID

(in)

O.D. (in)

I.D.(in)

OAL (in)

Ball Size (in)

Setting Tool

High Temp.

(F°)Pressure

Type

4-½"9.5-15.1

3.920 4.0903.5 0.75 24.10 1.496 Baker #10

350°+

6k - 12k BD

5" 18-24.1 4.0 4.276 6k - 12kBP

CgB

5-½" 17-23 4.670 4.892 4.30 1.270 24.02.25 / 1.875

Baker #20 G-Tool

(Shorty)

6k - 12k BD

6k - 12kBP

CgB

Operating Specs

Proudly made in the U.S.A.

Paten

ted

13

13

Run-In Speeds

Vertical Section 800 feet / minute

Horizontal Section 400 feet / minute

Mustang Series Frac Plug: Key Advantages

The Mustang Series Frac Plugs have a Patented Nose Cone Design that keeps the plug located in the center of the casing during the pump-down process to prevent pre-setting the plug.

Positive Engagement between Nose Cone and Crown

Time is Money Spent!

The Mustang Series Frac Plugs have been recorded being pumped down hole at speeds of 800 FPM in the vertical and 400 FPM in the horizontal without pre-setting.

There is absolutely 0% aluminum in a MEG Frac Plug, thus reducing the risk of a bit or mill gumming up.

The MEG Frac Plug is very Mill or Drill Bit friendly Having a record of drilling over 50 Mustang Series Frac Plugs with one tri-cone sealed Kingdream rockbit (HA Series)

With the quick drill out times for the MEG Frac Plug and the use of a single rockbit, the process saves an estimated 24 hours over using competing frac plugs. This translates into direct operating

cost savings for the customer.

During the drill up process, it is very important that a Frac Plug’s componentsare capable of being drilled up into pieces that are small enough as to not get

the tool string hung up or stop-up the choke manifolds during flow back. Thecombination of the material formulation of the MEG Frac Plug and the unique

design of our slips have proven to be a combination that drills or mills up very fast, with cuttings that pose no threat to the possibility of stopping up a choke

manifold when flowed back.

The patented formulation of materials that the MEG Frac Plug is comprised of has been proven to have unbelievable drill up times.

The McClinton Energy Frac Plug is designed to give the user the benefit of positive engagement between two plugs. During the drill out process when a Frac Plug is drilled out to the Nose Cone portion, the slips will no longer hold the Nose Cone and it drop to the plug below. The Patented Crown Design on the Mandrel allows the Nose Cone to set securely in the crown of the frac plug below, which prevents the Nose Cone portion from spinning, allowing it to be easily drilled or milled up.

The Average Drill out time for a mustang series frac plug is 6-10 minutes per plug!

14

14

Drill Out ProfileThe following gives variations of drill out characteristics for multiple plug setting depths

• PLUG(9): Tag Plug 9 @ 10,899’ CTM, Drill out in 03 Minutes, TI and tag Plug 8 @ 12,749’ CTM

• PLUG(8): Tag Plug 8 @ 12,749’ CTM, Drill out in 02 Minutes, TIH and tag Plug 7 @ 12,969’ CTM

• PLUG(7): Tag Plug 7 @ 12,969’ CTM, Drill out in 06 Minutes, TIH and tag Plug 6 @ 13,344’ CTM

• PLUG(6): Tag Plug 6 @ 13,344’ CTM, Drill out in 10 Minutes, TIH and tag Plug 5 @ 13,905’ CTM

• PLUG(5): Tag Plug 5 @ 13,905’ CTM, Drill out in 17 Minutes, TIH and tag Plug 4 @ 14,379’ CTM, Short Trip

• PLUG(4): TIH &Tag Plug 4 @ 14,379’ CTM, Drill out in 04 Min-utes, TIH and tag Plug 3 @ 14,498’ CTM

• PLUG(3): Tag Plug 3 @ 14,498’ CTM, Drill out in 08 Minutes, TIH and tag Plug 2 @ 15,505’ CTM

• PLUG(2): Tag Plug 2 @ 15,505’ CTM, Drill out in 08 Minutes, TIH and tag Plug 1 @ 16,001’ CTM

• PLUG(1): Tag Plug 1 @ 16,001’ CTM, Drill out in 12 Minutes, PBTD @ 16,052’ CTM

9 Mustang Series 4.5” Ball Drop Composite Frac Plugs (CFP) for the completion of a Permian Basin well. Casing- 4.5”, 13.5# P-110, TVD-10,897’, PBTD-16,217’.

The average drill out time per CFP was 7.7 minutes.

Patented Mustang Series

Ball Drop - B

ridge - Caged Ball

Proudly made in the U.S.A.

15

15

BICO SpiroStar Stators provide strength, durability and increased power output making them the smart choice for optimum performance in today’s ever-changing and harsher environments. Proven performance derived over years of field testing has established SpiroStar as the market leader. SpiroStar Stators are commercially available in sizes ranging from 1-11/16” through 8”.

• More power – Underlying steel lobes permit the rubber to achieve a stronger seal resulting in 2x more power than most conventional motors. This often results in higher effective ROP’s due to more time on bottom drilling in directional steering applications due to a more consistent tool face. This can be critical in high angle, extended reach, performance drilling, over thrust drilling or applications where you need more power such as when you require high weight on bit or run larger bi-center bits in a deepwater application.

• Longer life – Uniform thickness of injected elastomer in each tool reduces the probability of chunking due to hysteretic failure since the elastomer is structurally supported by the steel tube. We currently have stators in the field that have in excess of 1200 circulating hours without being relined.

• Higher temperature ratings – Thin, uniform thickness of the rubber causes it to expand very little with temperature changes. Heat generated in standard drilling operations is more readily dissipated through the thin layer of rubber, directly to the steel tube. Even Wall power sections have been run in wells with temperatures approaching 400 degrees.

• Chemical resistance – Fluids that tend to swell or soften other various rubber compounds on the market do not effect the Even Wall stators in many cases. Performance in oil based and synthetic muds has been impressive and the number of relines has been greatly reduced.

• Improved performance capability – In many directional applications a shorter tool can be run due to the higher power output per unit length. This has permitted higher dogleg capability and increased the use of motors in specialty applications. Some of the specialty applications have included dual laterals, open hole sidetracks, use on production decks of offshore platforms, coiled tubing and coal bed methane applications.

For Illustrative Purposes Only

Downhole Motors

16

16

Operating Data Flow Range gpm (lpm) 60 - 120 (225 - 450) Motor Pressure psi (bar) 875 (60) Bit Speed rpm 191 - 383

rev/gal (rev/l) Displacement 3.191 (.843)ft-lbs (Nm) Torque 535 (725)

Power HP (Kw) 39 (29)

Stages 3.5Physical Dimensions

Lobes 5/6in (mm) Bit to Stabilizer N/A

Fixedi n (mm) 31.1 (790)Adj in (mm) 37.2 (945)

Fixed ft (m) 12.0 (3.7)Adj ft (m) 12.9 (3.9)

lbs (kg) Weight 205 (93) Connections Box 2-3/8 Reg, Top/Bottom

Overall Motor Length

Bit Sizei n (mm) 3-1/4 - 4 (82.6 - 101.6)

Power Section Configuration

Bit to Bend

0

50

100

150

200

250

300

350

400

0 100 200 300 400 500 600 700 800 900 1000

Bit

Spee

d (r

pm)

0

50

100

150

200

250

300

350

400

450

500

550

600

650To

rque

(ft-l

bs)

120 GPM

90 GPM

Rated

60 GPM

Motor Type Motor Output M otor Input DiaM odel B it Speed

Physical Motor D ataTorque Power Flow Range Motor DP Bit Size

-(IN) RPM FT-LBS (NM) HP (KW) GPM (LPM) PSI (BAR) (IN)

3-1/4" to 4"

1-7/8" to 2-3/4"

STAGES LOBESR EV/GAL

3.5

3.5

5/6

Power Section

5/6

3.333

0.851

875 (60)

875 (60)

2.3575 (40) 5/6 10.12

2-7/8"

2-1/8"

SS150

1-11/16"

SS150

SS150AD

SS100

191-383

200-400

202-405

535 (725)

535 (725)

168 (227)

48 (36)

39 (29)

13 (9.7)

60-120 (225-450)

20-40 (76-151)

20-50 (76-190) 2-3/16" to3-1/4" 6

225-450 (637-1275)

1500 (103) 5/6 13.61270-680 412 (559) 53 (40)

17

17

COILED TUBING CONNECTOR

HYDRAULIC DISCONNECT DUAL CIRCULATING SUB

DUAL FLAPPER CHECK VALVE

One of the most important tools in a Coil Tubing Bottom Hole Assembly is the Connector. It is the link between the BHA and the pipe itself. As such, it should be able to withstand severe conditions such as side loading, snubbing, and pulling under manydifferent well bore environments. The HDT “Slim/Set” line of Connectors has proven time and time again to be the strongest and most reliable Connectors available today. It is available in standard service material and L-80 sour service material upon request.

The models include:

1.438” OD for 1” Coil

1.687” OD for 1 1/4” Coil

1.938” OD for 1 1/2” Coil

2.188” OD for 1 3/4” Coil

2.438” OD for 2” Coil

Heavy Duty “HD” models are also available and are referred to as “Slip/Set” Connectors

The Hydraulic Disconnect is used to provide a means of remote separation of the tool string from the coil tubing by way of a drop ball. The lug style of the “BMF” has proven time and again to be the industries strongest to date allowing for operators to effectively and repeatedly jar with this tool in fishing assemblies. It also has a very strong anti-rotational featurefor use with mud motors.

The models include:

1.687” OD

2.125” OD

2.875” OD

The use of a Dual Circulating Sub allows operators to remote by-pass operating fluids that may potentially harm mud motor components. This Is done by means of a drop ball that will shift a piston and divert the fluid around any tool below. It also has a rupture port feature that willshear and allow circulation inthe event a mill becomes plugged solid and circulation cannot be achieved for disconnecting purposes.

The models include:

1.687” OD

2.125” OD

2.875” OD

The Dual Flapper Check Valve is used to prevent well bore pressure from flowing back through the work string. It has a large diameter ID through the cartridge valve seat to allow for maximum flow rates and minimum flow restrictions. Unlike other Flapper Valves, the HDT Valve has replaceable Vitonseats which keeps maintenancecost to a minimum. It is also considerably shorter in length than other available valves. Aflas and Teflon seats available upon request.

The models include:1.687” OD2.063” OD2.125” OD2.875” OD

18

18

Lubricator, 10K-15K Working PressureHydraulic Triple Ram Wireline BOP

Plug Catchers

Product Desc. Application Working Pressure Test Pressure ID (Range) Features

Grease Inj. Pkg. All 10,000 15,000 5-1/8”

Grease Inj. Pkg. All 15,000 22,000 5-1/8”

Dual HYD grease inj. pump, hoses, lubricator, BOP and grease head

Dual HYD grease inj. pump, hoses, lubricator, BOP and grease head

Grease Injection Packages

Flowback ServicesAll of our flowback units are comprised of tested and certified 15k components. We also offer

plug catchers with our flowback services that are rated at 5k. Flowback services are performed by a two-man crew of professionally trained and experienced flowback operators and hands.

19

19

Services

Services customized for your specific application. From sand clean-outs and plug drill outs to ultra high pressure, high temperature (HPHT) operations.

MEG Coil Tubing units are rated up to a maximum allowableworking pressure of 15M psi.

MEG Coil Tubing units are suitable for sweet and/or sour service in onshore environments.

Our inventory of hydraulic Coil Tubing injector systems includeinjectors that can safely handle 1-1/4" to 3-1/2" O.D. coil with amaximum pull force of 80,000 lbs and continuous maximum snub force of 40,000 lbs.

Coil Tubing EquipmentCoil Tubing UnitsCoil Tubing 17,000' tapered 2"

Weight of Units 110,000-160,000 lbs

Pipe Sizes 2"

Pressure Control Equipment 15,000 psi

Data Acquisition Yes

BOP Stacks 5-1/16"

Completion

Coil Tubing Completion

Jetting

Setting Packers and Plugs

Tubing Conveyed Perforating

Well Fluid Displacement

Vertical and Horizontal plug drillouts

Production

Acid Stimulation

Paraffin Removal

Workover

Back Washing Injection Wells

Cementing

Foam Washing with Nitrogen

Milling

Plug and Abandonment

Sand Washing

Setting Packers and Plugs

Solid Removal

Thru-Tubing Fishing

Coil Tubing and Nitrogen

20

20

Nitrogen Pumping Units

Fluid Pumping Units

N2 Tank 2,000 gal

N2 Pump Displacement 180,000 scfh

Max Working Pressure 10,000 psi

Max Displacement of N2 3,000 scf/min

Weights 65,000-75,000 lbs

Pump Rates Up to 12 BBLS/Min

Pressure Rating (working) 5,000-15,000 psi

Weights 50,000-73,500 LBM

21

21

Frac Spread - Pressure Pumping Services

Skid Mounted Pumps22,000 HP in a 80' x 80' footprintAll units fully contained with waste removal systemFire suppression systemLow operator requirementsAir start systemQuick rig up / down

Advanced diagnostics in the Micro Motion system allow the user to monitor the operating performance of the PSA meter and to differentiate between air in the system and changes in fluid, thus increasing system performance. Measurement accuracy meets application requirements, and because the technology is non-radioactive, the extra safety, certification, and handling issues associated with a nuclear densitometer are eliminated. Additionally, setup is simplified and startup time is reduced due to the elimination of the nuclear densitometer’s zeroing and calibration. Requirements, saving time and money on each job.

• Conservative Footprints

• Environmental and Safety Control

• Cost savings

22

22

Hybrid Backside Hydro-Blender

The Sand Warrior - Expandable Sand Storage

US Provisional Patent Application Serial No: 61/528,125

US Provisional Patent Application Serial No: 61/528,123

Minimum 300,000 lb storage to Maximum 500,000 lb storageMulti-unit operators controlElevated control area

160 bbl capacity baffle walled tankRated 125 bpm2-1/2” Augers, 1-8” AugerMixing Tub Volume is 10 bblsConcentration Capacity is 20lb / galSand Transfer Capacity is 28,600 lbs / min2 - Gorman Rupp 12” x 12” Suction Pumps1 - Mission 14” x 12” Discharge Pump, Discharge rate of 125 bpm @ 70 psi3 - 10” Magmeters, Tank Suction, Tank Discharge, Tub DischargeNon-Radioactive micro-motion density metersElevated operators cabinOperator friendly Manual or Automatic modesCompatible suction and discharge manifolds

49.2'

8.52

'

13.4

4'

23

23

Data Unit

Blender

• 360° viewing of location and surrounding areas

• Generator powered

• Simple and user friendly DAS

• Satellite / Remote monitoring and live stream video

• Low operator costs

• Skid mounted 120 bbl / min blender

• Fully contained with fire suppression system

• 10bbl tub

24

24

Foot Print

80'80'

Average Crew of 10 4 - Backside Operators 2 - Frontside Operators 1 - Control Room Operator 1 - Treater 2 - Lab Techs

Environmental Control Contained Chem Units Contained Hydro-Blender Contained Frac Skid

The vision of this design is to be on the front end of Shale Play, Multi-Well completion pads. It minimizes the amount of overhead by designing a spread of ‘Must-Haves’. The design footprint is a must have on Mega Pads. The safety and Environmental Protections, Footprint, and Operating Areas are highly significant to the safety and success of high rate pressure fracs.

25

25

Adamandt uses 10” Aluminum pipe, which is lightweight and easily moved for speedy project setup and deconstruction. Our inventory totals over 30 miles of pipe with both Ring-Lock and Victaulic style connections.

Adamandt Water Transfer is dedicated to getting the water you need to your location in a safe and efficient manner. Our professionally trained pump operators make customer satisfaction and safety their top priority. Combining this with over 30 miles of aluminum pipe and all-terrain capabilities, Adamandt Water Transfer brings you both affordable and reliable water transfer services.

Our inventory of more than 24 water transfer pumps run at 350 hp.

Water Transfer Services

Aluminum Pipe

26

26

Adamandt also has 20 miles of 10” polyurethane lay flat hose available, which allows for quick layout and retrieval along with more flexibility. With the ability to layout and retrieve up to 1 mile in 30 minutes, we are able to “change on the fly” by decreasing layout and retrieval times almost as much as 90%.

The leak proof and chemical resistance of this hose allows us to transfer produced and other chemical-laden water that is not possible due to system leaks inherent in aluminum irrigation pipe systems. There are also fewer chances for failure using high quality couplings that require only 8 connections per mile compared to 176 connections per mile for aluminum irrigation pipe.

Max Flow Chart

Specifications

Lay Flat Hose

Corporate Location - Odessa, Texas12620 Hwy 191

Midland, TX 79707Phone: 432-563-5500

Fax: 432-563-5506www.mcclintonenergy.com

For more information about your next project, contact the sales / service location in your area. Our

knowledgable sales staff can answer your questions when planning your drilling program.

WW

W.M

CC

LIN

TON

ENER

GY.

CO

M

Midland / Odessa, TX

Johnstown, CODenver, CO (Sales)

Victoria, TX

Joshua, TXHouston, TX (Sales)

Casper, WY Oklahoma City, OK (Sales)Norman, OK

Canton, OH

Elmira, NYPerryopolis, PA

Marietta, OH

Midland / Odessa, TexasPhone: 432-563-5500Fax: 432-563-5506

Joshua, TexasPhone: 817-202-0350Fax: 817-202-0942

Canton, OhioPhone: 330-477-4590Fax: 330-477-4890

Perryopolis, PennsylvaniaPhone: 724-736-4500Fax: 724-736-4511

Oklahoma City, OklahomaPhone: 405-598-0541

Denver, ColoradoPhone: 720-237-6445

Phone: 970-344-7288Johnstown, Colorado

Victoria, TexasPhone: 361-578-0830

Fax: 361-578-0849

Elmira, New York Phone: 607-733-3350

Fax: 607-733-3360

Marietta, OhioPhone: 740-336-7898

Casper, WyomingPhone: 307-237-6026

Fax: 307-237-0990

Norman, OklahomaPhone: 405-701-8000Fax: 405-701-8003

Houston, TexasPhone: 713-816-3454

Service Locations

Sales Locations

WE’RE STACKED