PWV Installation Manual Moore Industries

7/29/2019 PWV Installation Manual Moore Industries

1/27


2/27


3/27


4/27


5/27


6/27


7/27


8/27


9/27


10/27


11/27


12/27


13/27


14/27


15/27


16/27


17/27


18/27


19/27


20/27


21/27


22/27


23/27


24/27


25/27


26/27

Declaration of ConformityEMC Directive 89/336/EEC

Manufacturers Name: Moore Industries-International, Inc.

Manufacturers Address: 16650 Schoenborn StreetNorth Hills, CA 91343-6196USA

Declares that the product(s):

Product Name: PWV

MODEL / INPUT / OUTPUT / POWER / OPTIONS / HOUSING

Model Number(s): PWV * * * *-CE *

*Indicates any input, output, option and housing as stated in the product data sheet.

Conforms to the following EMC specifications:EN50081-2, 1993, Generic Emissions Standard; Industrial Environment.EN50082-2, 1995, Generic Immunity Standard; Industrial Environment.

EN61010-1, 1995, Safety requirements for electrical equipment for measurement and control use.

Supplemental Information:None.

August 6, 1997 ______________________________ _____________________________________Date Fred Adt Robert Stockham

Quality Assurance Director Moore Industries-International, Inc.

European Contact: Your Local Moore Industries Sales and Service Office


27/27

To return equipment to Moore Industries for repair, follow these four steps:

1. Call Moore Industries and request a Returned Material Authorization (RMA) number.

Warranty Repair

If you are unsure if your unit is still under warranty, we can use the units serial numberto verify the warranty status for you over the phone. Be sure to include the RMA

number on all documentation.

Non-Warranty Repair If your unit is out of warranty, be prepared to give us a Purchase Order number when

you call. In most cases, we will be able to quote you the repair costs at that time.The repair price you are quoted will be a Not To Exceed price, which means that theactual repair costs may be less than the quote. Be sure to include the RMA number on

all documentation.

2. Provide us with the following documentation:

a) A note listing the symptoms that indicate the unit needs repair

b) Complete shipping information for return of the equipment after repair

c) The name and phone number of the person to contact if questions arise at the factory

3. Use sufficient packing material and carefully pack the equipment in a sturdy shipping

container.

4. Ship the equipment to the Moore Industries location nearest you.

The returned equipment will be inspected and tested at the factory. A Moore Industriesrepresentative will contact the person designated on your documentation if more information is

needed. The repaired equipment, or its replacement, will be returned to you in accordance withthe shipping instructions furnished in your documentation.

WARRANTY DISCLAIMERTHE COMPANY MAKES NO EXPRESS, IMPLIED OR STATUTORY WARRAN-

TIES (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR OF FITNESSFOR A PARTICULAR PURPOSE) WITH RESPECT TO ANY GOODS OR SER-VICES SOLD BY THE COMPANY. THE COMPANY DISCLAIMS ALL WARRAN-TIES ARISING FROM ANY COURSE OF DEALING OR TRADE USAGE, ANDANY BUYER OF GOODS OR SERVICES FROM THE COMPANY ACKNOWL-EDGES THAT THERE ARE NO WARRANTIES IMPLIED BY CUSTOM ORUSAGE IN THE TRADE OF THE BUYER AND OF THE COMPANY, AND THATANY PRIOR DEALINGS OF THE BUYER WITH THE COMPANY DO NOT IM-PLY THAT THE COMPANY WARRANTS THE GOODS OR SERVICES IN ANYWAY.

ANY BUYER OF GOODS OR SERVICES FROM THE COMPANY AGREESWITH THE COMPANY THAT THE SOLE AND EXCLUSIVE REMEDIES FORBREACH OF ANY WARRANTY CONCERNING THE GOODS OR SERVICESSHALL BE FOR THE COMPANY, AT ITS OPTION, TO REPAIR OR REPLACE

THE GOODS OR SERVICES OR REFUND THE PURCHASE PRICE. THECOMPANY SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL ORINCIDENTAL DAMAGES EVEN IF THE COMPANY FAILS IN ANY ATTEMPT

TO REMEDY DEFECTS IN THE GOODS OR SERVICES , BUT IN SUCH CASETHE BUYER SHALL BE ENTITLED TO NO MORE THAN A REFUND OF ALLMONIES PAID TO THE COMPANY BY THE BUYER FOR PURCHASE OF THEGOODS OR SERVICES.

RETURN PROCEDURES

ANY CAUSE OF ACTION FOR BREACH OF ANY WARRANTY BY THECOMPANY SHALL BE BARRED UNLESS THE COMPANY RECEIVESFROM THE BUYER A WRITTEN NOTICE OF THE ALLEGED DEFECT ORBREACH WITHIN TEN DAYS FROM THE EARLIEST DATE ON WHICH THEBUYER COULD REASONABLY HAVE DISCOVERED THE ALLEGED DE-FECT OR BREACH, AND NO ACTION FOR THE BREACH OF ANY WAR-RANTY SHALL BE COMMENCED BY THE BUYER ANY LATER THANTWELVE MONTHS FROM THE EARLIEST DATE ON WHICH THE BUYERCOULD REASONABLY HAVE DISCOVERED THE ALLEGED DEFECT ORBREACH.

RETURN POLICYFor a period of thirty-six (36) months from the date of shipment, and undernormal conditions of use and service, Moore Industries ("The Company") willat its option replace, repair or refund the purchase price for any of its manu-factured products found, upon return to the Company (transportation charges

prepaid and otherwise in accordance with the return procedures establishedby The Company), to be defective in material or workmanship. This policyextends to the original Buyer only and not to Buyer's customers or the users

of Buyer's products, unless Buyer is an engineering contractor in which casethe policy shall extend to Buyer's immediate customer only. This policy shallnot apply if the product has been subject to alteration, misuse, accident, ne-glect or improper application, installation, or operation. THE COMPANYSHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSE-QUENTIAL DAMAGES.

United States [email protected]: (818) 894-7111 FAX: (818) 891-2816

Belgium [email protected]: 03/448 10 18 FAX: 03/440 17 97

China [email protected]: 86-21-62491499 FAX: 86-21-62490635

PWV Installation Manual Moore Industries

Documents

Transcript of PWV Installation Manual Moore Industries