PVT_2012-Lab-Cisco Prime Collaboration Manager

7/27/2019 PVT_2012-Lab-Cisco Prime Collaboration Manager

1/6

Cisco Prime Lab

Getting Started

1.Connecting to the labTo connect to the lab infrastructure, you will need the AnyConnect VPN client.

3.1 If you dont have it installed on your PCLaunch your web browser to https://entnmsvpn-eu.cisco.com , and logon using your pod

login information (podx, podx).Select AnyConnect from left column

Then clickstart AnyConnectAccept the certificate.

You are in the lab, and now the AnyConnect VPN client is installed on your PC.

3.2 If you already have it installed on your PCLaunch it and connect to entnmsvpn-eu.cisco.com

Logon using your pod login information (podx, podx).

3.3 Access to the lab through a remote system (when response time isbad)

Sometimes, response time of lab application from your client system can be slow (depending fromwhere you run your client) . It is possible to connect to a window 2008 VM inside the lab through

remote desktop and to execute the lab from there.

Remote VM ip addresses are 10.3.198.10x where x is the pod number from 1 to 6

Username : administrator

Password : C1sc0123

2.Lab environmentThe lab infrastructure deployment is shown on the picture below.Every POD has its own pair of Catalyst Ethernet switches (3750 or 3560 depending on the POD). One

switch is located on the East side (SW-PODx-E) and can be accessed with its loopback address

10.14.20x.1 and the other switch is located on the West side (SW-PODx-W) and can be accessed with

its loopback address 10.14.20x.2, where x = POD number. Verif iy that you can telnet to both of your

PODs Ethernet switches.

All the PODs share the same WAN infrastructure which is made of six ISR routers, simulating atraditional customer configuration:

AGG-W ISR 2811 loopback0 - 10.14.200.1DIST-W ISR 2811 loopback0 - 10.14.200.2


2/6

CORE-W ISR 2911 loopback0 - 10.14.200.3

CORE-E ISR 2911 loopback0 - 10.14.200.4

DIST-E ISR 2811 loopback0 - 10.14.200.5AGG-E ISR 2811 loopback0 - 10.14.200.6

Each ISR router is equipped with its own NAM module:

On AGG-W SRE-NAM 10.15.1.1

On DIST-W NME-NAM 10.15.2.1On CORE-W SRE-NAM 10.15.3.1

On CORE-E SRE-NAM 10.15.4.1

On DIST-E SRE-NAM 10.15.5.1

On AGG-E NME-NAM 10.15.6.1

On ALT-DIST-E SRE-NAM 10.15.7.1

On ALT-CORE SRE-NAM 10.15.8.1On ALT-DIST-W SRE-NAM 10.15.9.1

All the infrastructure equipments can be accessed with the same credentials:

user = admin, password = C1sc0123, enable = C1sc0123.

Every POD has two 79xx IP Phones, one being connected to each of its Ethernet switches according to

the layout below:


3/6

2006 Cisco Systems, Inc. All rights reserved. Cisco PublicPresentation_ID 2

POD1

POD2

POD3

POD4

POD5

POD6

POD99

POD 1

POD2

POD3

POD4

POD5

POD6

POD99

DHCP 10.14.61.x - #3102

DHCP 10.14.62.x - #3202

DHCP 10.14.63.x - #3302

DHCP 10.14.64.x - #3402

DHCP 10.14.65.x - #3502

DHCP 10.14.66.x - #3602

DHCP 10.14.51.x - #3101

DHCP 10.14.52.x - #3201

DHCP 10.14.53.x - #3301

DHCP 10.14.54.x - #3401

DHCP 10.14.55.x - #3501

DHCP 10.14.56.x - #3601

DHCP 10.14.69.x

#3921

#3922

#3923

#4083

#3911

#3912

#3913

#2141DHCP 10.14.59.x

Cisco Prime lab - endpoints

WEST EAST

Voice calls are already established between those 2 phones, so that there are altogether 12 RTP flowsgoing across the WAN.

POD99 is the video POD. It has four 79xx IP Phones (2 on each side), two 9971 video phones (1 on

each side) and two Telepresence endpoints (one EX90 on the East side and one Profile52 on the West

side). Sessions are also established between these pairs of endpoints, that add 8 RTP flows for voice

and 4 RTP flows for video going across the WAN.

The EX90 Telepresence endpoint is registered to CUCM (192.168.40.4) and the P52 Telepresence

endpoint is registered to the VCS (192.168.40.80). CUCM and the VCS are interconnected via a SIP

trunk.

All equipments in this configuration may use 192.168.40.254 (default gateway on CORE-W for the

192.168.40.x network) or 171.68.10.80 as NTP server.


4/6

3.Summary of useful data Shared equipmentsShared

Equipments

Switch POD SW-PODx-E SW-PODx-W

POD99 10.14.209.1 10.14.209.2

Switch Login

User admin

Password C1sc0123

Enable C1sc0123

TMS 192.168.40.89 TMS Login

User Administrator

Password C1sc0123

VCS 192.168.40.80 VCS Login

User admin

Password C1sc0123

CUCM 192.168.40.4 CUCM LoginUser Administrator

Password C1sc0Cxd92

EX90 10.14.59.2 EX90 Login

User admin

Password TANDBERG

P52 10.14.69.1 P52 Login

User admin

Password TANDBERG

NTP 192.168.40.254

171.68.10.80

DNS 192.168.40.1

10.3.192.209


5/6

4.Summary of useful data POD equipmentsSwitch POD SW-PODx-E SW-PODx-W Switch Login

POD1 10.14.201.1 10.14.201.2 User admin

POD2 10.14.202.1 10.14.202.2 Password C1sc0123

POD3 10.14.203.1 10.14.203.2 Enable C1sc0123

POD4 10.14.204.1 10.14.204.2

POD5 10.14.205.1 10.14.205.2

POD6 10.14.206.1 10.14.206.2

Routers Hostname Loopback0 NAM Router Login

AGG-W 10.14.200.1 10.15.1.1 User adminDIST-W 10.14.200.2 10.15.2.1 Password C1sc0123

CORE-W 10.14.200.3 10.15.3.1 Enable C1sc0123

CORE-E 10.14.200.4 10.15.4.1 NAM Login

DIST-E 10.14.200.5 10.15.5.1 User admin

AGG-E 10.14.200.6 10.15.6.1 Password cisco

ALT-DIST-E 10.14.200.7 10.15.7.1

ALT-CORE 10.14.200.8 10.15.8.1

ALT-DIST-W 10.14.200.9 10.15.9.1

CPCM CPCM-PODx CPCM Login

192.168.40.11 User admin

192.168.40.12 Password C1sc$123

192.168.40.13

192.168.40.14

192.168.40.15

192.168.40.16

PAM PAM-PODx PAM Login

192.168.40.21 User root192.168.40.22 Password Public123

192.168.40.23

192.168.40.24

192.168.40.25

192.168.40.26

NCSWAN

NCSWAN-

PODx PAM Login

192.168.40.31 User root

192.168.40.32 Password Public123

192.168.40.33


6/6

192.168.40.34

192.168.40.35

192.168.40.36

LMS LMS-PODx LMS Login

192.168.40.41 User admin

192.168.40.42 Password cisco

192.168.40.43

192.168.40.44

192.168.40.45

192.168.40.46

NAM NAM-PODx NAM web

10.15.1.1 User admin

10.15.2.1 Password cisco10.15.3.1

10.15.4.1 NAM Telnet

10.15.5.1 User root

10.15.6.1 Password cisco

Lab VM Win-PODx Login

10.3.198.101 User administrator

10.3.198.102 Password C1sc0123

10.3.198.103

10.3.198.104

10.3.198.105

10.3.198.106

PVT_2012-Lab-Cisco Prime Collaboration Manager

Documents

Transcript of PVT_2012-Lab-Cisco Prime Collaboration Manager