10

1

2

4-2 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9

6

7

5

3

4

8

PVC TYPE I SHEET

Simona® PVC Type I Sheet

Notes:• Meets ASTM D-1784-81 Type I Grade I Class 12454. • Meets Federal Specification L-P 535e. • Meets UL 94V-0,94-5V Flammability rating. • Meets ASTM E 84 Flame Spread Rate 15, Fuel Contribution 0. • Maximum application temperature +140°F. • Custom lengths, sizes, colors and special requirements available upon request.• Gray PVC Sheet has no protective foil.• White PVC Sheet has one side protective foil.• Blue PVC Sheet is available as a special order with one side embossed or with two sides smooth.• * refers to items that are non-stock. Minimum orders and long leadtimes may be encountered.• Custom lengths, sizes, colors and special requirements available upon request.• Also Available in White, Light Grey, and black without protective foil.

SIMONA® VERSADUR® and CAW PVC Type I sheet is extruded to exacting specification for normal impact applications. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing. It is available in dark gray, white and blue. It is available in 4’ x 8’ sheets and two metric sizes in thickness up to 2”.

Features:• Normal Impact • Excellent chemical and corrosion resistance • Easily to fabricate, weld or machine • Showcase quality surface • Single- or double-side protective foil • Stress relieved, square, flat sheets • Accurate to dimensional tolerances • Color consistent

PART NUMBER

THICK-NESS (IN)

WT PER

SHEET (LBS.)

PART NUMBER

THICK-NESS (IN)

WT PER

SHEET (LBS.)

GREY WHITES110011* 1/16 15.36 * 1/16 15.36

S110111* 3/32 23.04 * 3/32 23.04

S110211 1/8 30.72 * 1/8 30.72

S110311 3/16 46.08 * 3/16 46.08

S110411 1/4 61.44 * 1/4 61.44

S110511 3/8 92.16 * 3/8 92.16

S110611 1/2 122.88 * 1/2 122.88

S110711 3/4 184.32 * 3/4 184.32

S110811 1 245.76 * 1 245.76

PART NUMBER

THICK-NESS (MM)

WT PER

SHEET (LBS.)

PART NUMBER

THICK-NESS (MM)

WT PER

SHEET (LBS.)

CAW - 2000MM X 1000MM

CAW - 3000MM X 1500MM

S110012* 1 6.17 S110112* 1.5 9.48 S112012* 2 12.57 S112013* 2 28.22 S110212* 3 18.74 S110213* 3 42.33 S112212* 4 25.13 S112213* 4 56.44 S112512* 5 31.31 S112513* 5 70.55 S110412* 6 37.48 S110413* 6 84.43 S114812* 7 43.87 S114813* 7 98.55 S114612* 8 50.04 S114613* 8 112.66 S114912* 9 - S114913* 9 126.74 S113012* 10 62.61 S113013* 10 140.87 S110612* 12 75.18 S110613* 12 169.09 S113112* 15 93.92 S113113* 15 211.42 S113212* 20 125.22 S113213* 20 281.75 S110812* 25 156.53 S110813* 25 352.30 S110912* 30 187.83 S110913* 30 422.62 S113412* 35 219.14 S111012* 40 250.44 S111212 50 313.06

Applications:• Chemical processing • Semiconductor processing equipment • Pollution control equipment • Machined and fabricated parts • Etching and plating tanks • Scrubbers, hoods, ducts and other protective

equipment

10

2

1

www.fabcoplastics.com 4-3

9

6

7

5

3

4

8

SIMONA® PVC TYPE I SHEET TECHNICAL DATASIMONA® VERSADUR® PVC TYPE I ASTM TEST METHOD UNIT TYPICAL VALUE

PHYSICALDensity D-792 g/cc 1.45

Water Absorption (24 hrs @ 73 °F) D-570 % 0.04

MECHANICALTensile Strength D-638 PSI 7,820Tensile Modulus D-638 PSI 496,000

Elongation D-638 % 150Izod Impact D-256 ft. lbs./in. 0.8

Rockwell Hardness D-785 “R” scale 113

THERMALHeat Distortion Temperature at 66 psi D-648 °F 172Heat Distortion Temperature at 264 psi D-648 °F 162

Vicat Softening Temperature D-1525 °F 169Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6

Temperature Range °F +32 to +140

ELECTRICALVolume Resistivity D-257 ohm·cm >10 x 1015

FLAMMABILITYFlammability D-635 self-extinguishing

UL 94V-0, 94-5V

SIMONA® PVC TYPE I SHEET TECHNICAL DATASIMONA® CAW PVC TYPE I ASTM TEST METHOD UNIT TYPICAL VALUE

PHYSICALDensity D-792 g/cc 1.44

Water Absorption (24 hrs @ 73 °F) D-570 % NA

MECHANICALTensile Strength D-638 PSI 8,400

Tensile Modulus D-638 PSI 479,000

Elongation D-638 % 150

Izod Impact D-256 ft. lbs./in. 0.8

Rockwell Hardness D-785 “R” scale 108

THERMALHeat Distortion Temperature at 66 psi D-648 °F 168

Heat Distortion Temperature at 264 psi D-648 °F 154

Vicat Softening Temperature D-1525 °F 172

Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6

Temperature Range °F +32 to +140

ELECTRICALVolume Resistivity D-257 ohm·cm >10 x 1015

FLAMMABILITYFlammability self-extinguishing

94V-0 low flammability

DIN 4102 B1 low flammability

PVC TYPE I SHEET

10

1

2

4-4 Toronto, Edmonton, Saskatoon, Vancouver, Montreal

9

6

7

5

3

4

8

SIMONA® VERSADUR® and MZ PVC Type II sheet is extruded to exacting specification for high impact applications. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing. It is also available in 4’ x 8’ sheets in light grey and white.

PVC TYPE II SHEET

Simona® Versadur® PVC Type II Sheet

Applications:• Pollution control equipment • Machined and fabricated parts • Etching and plating tanks • Scrubbers, hoods, ducts and other protective

equipment

THICKNESS (MM) WT PER SHEET (LBS.)

VERSADUR 250 - 4’ X 8’ 1/16” 15 1/8” 30 3/16” 45 1/4” 60 3/8” 90 1/2” 120

Notes:• Meets ASTM D-1784-81 Type II Grade I Class 15333-D. • Meets ASTM E 84 Flame Spread Rate 15, Fuel

Contribution 0. • Meets UL 94V Standards. • Meets Federal Specification L-P 535e. • Maximum application temperature 140°F. • Custom lengths, sizes, colors and special requirements

available upon request.• Light Grey and white PVC Sheet have no protective foil.• Light Grey MZ sheet is offered without protective foil.

SIMONA® PVC TYPE II SHEET TECHNICAL DATA

ASTM TEST METHOD UNIT SIMONA® VERSADUR® PVC TYPE II

SIMONA® MZ PVC TYPE II

PHYSICALDensity D-792 g/cc 1.33 1.42

Water Absorption (24 hrs @ 73 °F) D-570 % 0.05 NA

MECHANICALTensile Strength D-638 PSI 6,070 7,500Tensile Modulus D-638 PSI 345,000 435,000

Elongation D-638 % 145 20Izod Impact D-256 ft. lbs/in 14 1.2

Rockwell Hardness D-785 “R” scale 107 107

THERMALHeat Distortion Temperature at 66 psi D-648 °F 165 162Heat Distortion Temperature at 264

psi D-648 °F 158 160

Vicat Softening Temperature D-1525 °F 162 167Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6 80 x 10-6

Temperature Range °F +32 to +140 +32 to +140

ELECTRICALVolume Resistivity D-257 Ohm-cm >1015 >1015

FLAMMABILITYFlammability self-extinguishing self-extinguishing

94V-0 low flammability DIN 4102 low flammability

Features:• High Impact (PVC-MZ: Increased Impact Resistance) • Minimal shrinkage • Good corrosion and chemical resistance • Easy to fabricate, weld or machine, hot and cold formable • Showcase quality surface • Stress relieved, square, flat sheets • Accurate to dimensional tolerances • Color consistent