Push-button and indicator lights
Transcript of Push-button and indicator lights
Push-button and indicator lights
RMQ16 Pilot Devices
There’s a certain energy at Eaton. It’s the power of uniting some of the world’s most respected names to build a brand you can trust to meet your every power management need. The energy created supports our commitment to powering business worldwide.
From power distribution to power quality and control, Eaton allows you to proactively manage your complete power system by providing electrical solutions thatmake your applications more reliable, efficient andsafe. Visit Eaton.com/electrical.
All of the above are trademarks of Eaton Corporation or its affiliates. Eaton has a license to use the Westinghouse name in Asia Pacific. ©2010 Eaton Corporation.
RMQ16 pilot devicesRMQ16
System overview
1
6
5
7
8
9
2
3
4
10
11
1
RMQ16 pilot devicesRMQ16
Emergency stop pushbuttons 1Can also be used as emergency switching-off devicesTamper-proof according to ISO 13850/EN 418Illuminated and non-illuminatedAdditional labels, with and without inscriptionEuropean Machinery Safety Directive 2006/42/EC
Page 9
Label mounts 2For insert labelsColor: light gray, black, yellowInsert labels, with inscription and blank
Page 13
Key-operated buttons 3
2 and 3 positionsSwitching angle 45°Momentary and maintainedVarious lock mechanisms
Page 7
Contact element NC (red) 4
With blade terminalUniversal contacts suitable for use with electronic devicesPositive opening safety function according to IEC/EN 60947-5-1
Page 3
Illuminated pushbutton actuators 5
Momentary and maintainedReplaceable insert labelsColors: white, green, red, yellow, blue Custom laser labeling
Page 4
Contact element N/O (green) 6
With blade terminalUniversal contacts suitable for use with electronic devices
Page 3
Selector switch actuators 7
2 and 3 positionsSwitching angle 45°Momentary and maintainedIlluminated selector switch actuators with built-in lamp socketColors: white, green, red
Page 5
Indicator lights 8
Flat and conical designsBuilt-in lamp socketFor filament bulbs and LEDsColors: white, green, red, yellow, blue Custom laser labeling
Page 8
Pushbutton actuators 9
Momentary and maintainedReplaceable button platesColors: white, green, red, yellow, blue, black
Page 3
Button plates/insert labels 10
Wear-resistant button plates for pushbutton actuatorsTransparent insert plates for illuminated pushbuttons and indicator lightsWith and without inscriptionWith standard texts and symbols or with custom laser labeling
Page 10
Labeling with convenience 11
All button plates, indicator lights and additional button labels from the RMQ-Titan range can be laser inscribed with any inscription and symbol as required.Download: www.moeller.net/de/support, Keyword: “Labeleditor”
Product Features• Front dimension and minimum grid
dimensions18 x 18 mm or 25 x 25 mm
• Mounting diam eter 16.2 mm to EN 50007
• Protection type IP65• For switching differing potentials• Suitable for use with electronic devices to
IEC/EN 61131-2
• Technical data to IEC/EN 60947-5-1• Approved throughout the world
2
RMQ16 pilot devicesPushbuttons
Pushbuttons
Front dimensions 18 x 18 mm
Front dimensions 25 x 25 mm
Color Part no.Article no.
Part no.Article no.
PriceSee price list
Std. packInformation relevant for export to North America
Button plate
Pushbutton actuators, IP65
Momentary Q18D-11086332
Q25D-11090471
Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection
Red Q18D-10086299
Q25D-10090421
10 off
White Q18D-20054041
Q25D-20054038
Black Q18D-19054040
Q25D-19054039
Black Q18D-SW086788
Q25D-SW087230
White Q18D-WS086752
Q25D-WS086808
Green Q18D-GN086450
Q25D-GN086409
Red Q18D-RT086713
Q25D-RT086444
Yellow Q18D-GE086417
Q25D-GE086343
Blue Q18D-BL086384
Q25D-BL086328
– None Q18D-X093623
Q25D-X093624
Black Q18DR-SW086269
Q25DR-SW088739
White Q18DR-WS086243
Q25DR-WS088701
Green Q18DR-GN086176
Q25DR-GN088531
Red Q18DR-RT086209
Q25DR-RT088627
Yellow Q18DR-GE090482
Q25DR-GE088404
Blue Q18DR-BL090241
Q25DR-BL088110
– None Q18DR-X093625
Q25DR-X093626
= Safety function by posi-tive opening according to IEC/EN 60947-5-1
Circuit symbol
Contact sequence
Color Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
N/O = nor-mally open contact
NC = nor-mally closed contact
(Admissible operating voltage: 5 – 250 V)
1 N/O – E10090351
50 off Product Standards
UL File No. UL CCN CSA File No. CSA Class No. NA Certification
– 1 NC � E01090401
50 off
Notes x = Sequence number on front elementy = Function number on contact element
Accessories PageAssembly aids and accessories
15
Contact elementsN/O 3NC 3
.3
.4
0 2.2
.1
.2
0 1
xy
xy
Contact elements
Q18D(R)..., Q25D(R),
IEC/EN 60947-5; UL 508;CSA-C22.2 No.°14-05; CE markingE29184KCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
→
→
→
→
IEC/EN 60947-5; 508; CSA-C22.2 No. 14-05; CE°markingE29184NKCR465523211-03UL Listed,CSA certified
Green
Maintained
3
RMQ16 pilot devicesIlluminated pushbutton actuators
Illuminated pushbutton actuators
Front dimensions 18 x 18 mm
Front dimensions 25 x 25 mm
Color Part no.Article no.
Part no.Article no.
PriceSee price list
Std. packInformation relevant for export to North America
Lens
MomentaryWithout filament bulb
– Q18LT-WS089202
Q25LT-WS086262
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
– Q18LT-GN089067
Q25LT-GN086206
– Q18LT-RT089776
Q25LT-RT086238
– Q18LT-GE088808
Q25LT-GE086173
– Q18LT-BL088764
Q25LT-BL090479
– Without lens Q18LT-X051745
Q25LT-X051746
With filament bulb, 24 V
– Q18LT-WS/WB088561
Q25LT-WS/WB090226
– Q18LT-GN/WB088509
Q25LT-GN/WB089190
– Q18LT-RT/WB088537
Q25LT-RT/WB089998
– Q18LT-GE/WB088449
Q25LT-GE/WB089137
– Q18LT-BL/WB088338
Q25LT-BL/WB089102
MaintainedWithout filament bulb
– Q18LTR-WS088123
Q25LTR-WS087232
– Q18LTR-GN087831
Q25LTR-GN086812
– Q18LTR-RT087918
Q25LTR-RT086840
– Q18LTR-GE087764
Q25LTR-GE086784
– Q18LTR-BL086813
Q25LTR-BL086739
– Without lens Q18LTR-X051735
Q25LTR-X051736
With filament bulb, 24 V
– Q18LTR-WS/WB086708
Q25LTR-WS/WB086447
– Q18LTR-GN/WB086413 086380
– Q18LTR-RT/WB086448
Q25LTR-RT/WB086412
– Q18LTR-GE/WB086382
Q25LTR-GE/WB086346
– Q18LTR-BL/WB086348
Q25LTR-BL/WB086330
Contact configuration: = Safety function via positive
opening to IEC/EN 60947-5-1
Circuit symbol
Contact sequence
Color Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
N/O = normally open contact
NC = normally closed contact
Contact elements(Admissible operating voltage: 5 – 250 V)
1 N/O – E10090351
50 off
50 off
Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA Certification
– 1 NC � E01090401
Notes x = Sequence number on front elementy = Function number on contact element
Accessories PageAssembly aids and accessories
15
Contact elementsN/O 3NC 3
.3
.4
0 2.2
.1
.2
0 1 3.7 mm
xy
xy
Q18LT(R)..., Q25LT(R),Illuminated pushbutton actuators, IP65
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;E29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05; CE markingE29184NKCR465523211-03UL Listed, CSA certified
→
→
→
→
4
RMQ16 pilot devicesSelector switch actuators, Illuminated selector switch actuators
Front dimensions 18 x 18 mmFunction :
Color Part no.Article no.
Front dimensions 25 x 25 mmPart no.Article no.
PriceSee price list
Std. packInformation relevant for export to North America
= Momentary
= Maintained
Selector switch actuators, IP65
With VS anti-rotation feature
Two positions
45° Q18WK1036515
Q25WK1036599
5 off
5 off
5 off
Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
45° Q18WK1R036598
Q25WK1R036600
Three positions 45° 45° Q18WK3072308
Q25WK3072372
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
5 off
45° 45° Q18WK3R072309
Q25WK3R072373
45° 45° Q18WK3R1072310
Q25WK3R1072374
45° 45° Q18WK3R2072311
Q25WK3R2072375
Illuminated selector switch actuators, IP65With VS anti-rotation feature
Without filament bulb Two positions
45° Q18LWK1-WS040349
Q25LWK1-WS040658
5 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
45° Q18LWK1-RT039337
Q25LWK1-RT040657
45° Q18LWK1-GN039336
Q25LWK1-GN040656
45° Q18LWK1R-WS040376
Q25LWK1R-WS040661
45° Q18LWK1R-RT040351
Q25LWK1R-RT040660
45° Q18LWK1R-GN040350
Q25LWK1R-GN040659
With filament bulbTwo positions
45° Q18LWK1-WS/WB038978
Q25LWK1-WS/WB040379
5 off
45° Q18LWK1-RT/WB038930
Q25LWK1-RT/WB040378
45° Q18LWK1-GN/WB038883
Q25LWK1-GN/WB040377
45°039335 040476
45° Q18LWK1R-RT/WB039248
Q25LWK1R-RT/WB040381
45° Q18LWK1R-GN/WB Q25LWK1R-GN/WB039247 040380
Accessories PageAssembly aids and accessories
15
Contact elementsN/O 3NC 3
Q18WK..., Q25WK...
→
→→
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
Q18LWK1R-WS/WB Q25LWK1R-WS/WB
5
RMQ16 pilot devicesIlluminated selector switch actuator
→
→
→
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
Illuminated selector switch actuator
Front dimensions 18 x 18 mm
Front dimensions 25 x 25 mm
Part no.Article no.
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
Illuminated selector switch actuators, IP65
With VS anti-rotation feature
Without filament bulb,Three positions
45° 45° Q18LWK3-WS072322
Q25LWK3-WS072358
5 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
45° 45° Q18LWK3-RT072323
Q25LWK3-RT072359
45° 45° Q18LWK3-GN072324
Q25LWK3-GN072360
45° 45° Q18LWK3R-WS072325
Q25LWK3R-WS072361
45° 45° Q18LWK3R-RT072326
Q25LWK3R-RT072362
45° 45° Q18LWK3R-GN072327
Q25LWK3R-GN072363
45° 45° Q18LWK3R1-WS072328
Q25LWK3R1-WS072364
45° 45° Q18LWK3R1-RT072329
Q25LWK3R1-RT072365
45° 45° Q18LWK3R1-GN072330
Q25LWK3R1-GN072366
45° 45° Q18LWK3R2-WS072331
Q25LWK3R2-WS072367
45° 45° Q18LWK3R2-RT072332
Q25LWK3R2-RT072368
45° 45° Q18LWK3R2-GN072333
Q25LWK3R2-GN072369
With filament bulbThree positions
45° 45° Q18LWK3-WS/WB072334
Q25LWK3-WS/WB072346
45° 45° Q18LWK3-RT/WB072335
Q25LWK3-RT/WB072347
45° 45° Q18LWK3-GN/WB072336
Q25LWK3-GN/WB072348
45° 45°072337
Q25LWK3R-WS/WB072349
45° 45° Q18LWK3R-RT/WB072338
Q25LWK3R-RT/WB072350
45° 45°072339
Q25LWK3R-GN/WB072351
45° 45° Q18LWK3R1-WS/WB072340
Q25LWK3R1-WS/WB072352
45° 45°072341
Q25LWK3R1-RT/WB072353
45° 45° Q18LWK3R1-GN/WB072342
Q25LWK3R1-GN/WB072354
45° 45° Q18LWK3R2-WS/WB072343
Q25LWK3R2-WS/WB072355
45° 45° Q18LWK3R2-RT/WB072344
Q25LWK3R2-RT/WB072356
45° 45° Q18LWK3R2-GN/WB072345
Q25LWK3R2-GN/WB072357
Accessories PageAssembly aids and accessories
15
Contact elementsN/O 3NC 3
Q18LWK..., Q25LWK...
Function :
Color = Momentary
= Maintained
6
RMQ16 pilot devicesKey-operated button actuators
Q18S..., Q25S...
→
→
→
→
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed,CSA certifiedUL/CSA Part no. 1
IP65, key-operated button actuators
With 1 key and VS anti-rotation feature
Two positions
45° – 0 – Q18S1038806
Q25S1038773
5 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA Certification
Degree of Protection
45° I 0 – Q18S1R038805
Q25S1R038772
45° – 0 – Q18S1R-A1072312
Q25S1R-A1072376
45° – 0 – Q18S1-GN062148
Q25S1-GN062150
45° I 0 – Q18S1R-GN062151
Q25S1R-GN062108
45° – 0 – Q18S1-RT046841
Q25S1-RT046843
45° I 0 – Q18S1R-RT046837
Q25S1R-RT046839
45° – 0 – Q18S1-WS046849
Q25S1-WS046851
45° I 0 – Q18S1R-WS046845
Q25S1R-WS046847
45° – 0 – Q18S1-BL045959
Q25S1-BL046835
45° I 0 – Q18S1R-BL062814
Q25S1R-BL045502
Three positions 45° 45° – 0 – Q18S3072313
Q25S3072377
45° 45° I 0 II Q18S3R072314
Q25S3R072378
45° 45° – 0 – Q18S3R-A1072315
Q25S3R-A1072379
45° 45° I 0 – Q18S3R-A2072316
Q25S3R-A2072380
45° 45° – 0 II Q18S3R-A3072317
Q25S3R-A3072381
45° 45° I 0 – Q18S3R-A4072318
Q25S3R-A4072382
45° 45° – 0 – Q18S3R-A5072319
Q25S3R-A5072383
45° 45° – 0 II Q18S3R-A6072320
Q25S3R-A6072384
45° 45° – 0 – Q18S3R-A7072321
Q25S3R-A7072385
45° 45° – 0 – Q18S3-GN062149
Q25S3-GN062153
45° 45° I 0 II Q18S3R-GN062152
Q25S3R-GN062147
45° 45° – 0 – Q18S3-RT046842
Q25S3-RT046844
45° 45° I 0 II Q18S3R-RT046838
Q25S3R-RT046840
45° 45° – 0 – Q18S3-WS046850
Q25S3-WS046852
45° 45° I 0 II046846
Q25S3R-WS046848
45° 45° – 0 – Q18S3-BL046368
Q25S3-BL046836
45° 45° I 0 II Q18S3R-BL064430
Q25S3R-BL045646
Notes For each color there is a corresponding key. Page 2/97
Accessories Page
Assembly aids and accessories
15
Contact elementsN/O 3NC 3
Q18S3R-WS
Front dimensions 18 × 18 mm
Front dimensions 25 x 25 mm
Function: Key withdrawable in position
Color Part no.Article no.
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
= Momentary = Maintained
7
RMQ16 pilot devicesIndicator lights
Front dimensions 18 x 18 mm
Front dimensions 25 x 25 mm
Color Part no.Article no.
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
FlatWithout filament bulb
Q18LF-WS088406
Q25LF-WS090228
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
Q18LF-GN088337
Q25LF-GN090000
Q18LF-RT088387
Q25LF-RT090198
Q18LF-GE088303
Q25LF-GE089252
Q18LF-BL088270
Q25LF-BL089229
FlatWithout lens
Q18LX051739
Q25LX051740
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA Certification
Flat,withfilament bulb, 24 V
Q18LF-WS/WB088059
Q25LF-WS/WB089151
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
Q18LF-GN/WB087947
Q25LF-GN/WB088828
Q18LF-RT/WB088001
Q25LF-RT/WB089104
Q18LF-GE/WB087915
Q25LF-GE/WB088798
Q18LF-BL/WB087860
Q25LF-BL/WB088761
Conical
Conical,with
Without filament bulbQ18LH-WS088705
Q25LH-WS086263
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
Q18LH-GN088629
Q25LH-GN086207
Q18LH-RT088655
Q25LH-RT086241
Q18LH-GE088585
Q25LH-GE090481
Q18LH-BL088560
Q25LH-BL090428
filament bulb, 24 VQ18LH-WS/WB088535
Q25LH-WS/WB090405
10 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
Q18LH-GN/WB088483
Q25LH-GN/WB090312
Q18LH-RT/WB088507
Q25LH-RT/WB090354
Q18LH-GE/WB088448
Q25LH-GE/WB090285
Q18LH-BL/WB088424
Q25LH-BL/WB090240
Q18LF..., Q25LF..., Q18LH..., Q25LH...(Indicator lights, IP65)
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certified
–
8
RMQ16 pilot devicesEmergency stop pushbutton actuators, emergency stop labels
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;CE markingE29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
Front dimensions 25 x 25 mm
Color Protection Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
Emergency stop pushbuttonsOverload-protected to ISO 13850, EN 418Pushbutton remains in pushed position; pull to releaseCan also be used as emergency switching off pushbutton actuator
56PIdetanimulli-noN Q25PV072370
5 off
Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protectio
IlluminatedWith built-in multiple LED, 24 V DC, Ie = 15 mAPositive pole at X1No bulb replacement required.
IP65 Q25LPV072371
2 off
Emergency stop pushbuttons
Overload-protected to ISO 13850, EN 418Pushbutton remains in pushed position; pull to release
56PIdetanimulli-noN Q25PV-S257063
5 off
IlluminatedWith built-in multiple LED, 24 V DC, Ie = 15 mAPositive pole at X1No bulb replacement required.
IP65 Q25LPV-S257064
5 off
Emergency stop labelsYellow, black lettering
Square 50 × 50 mmde, en, fr, it
IP65 SQT11121375
5 off UL/CSA certification not required
Round ø 60 mmde, en, fr, it
IP65 SRT11121374
5 off
Emergency-stop labelsYellow, black lettering
Square 50 × 50 mmde, en, fr, it
IP65 SQT1058874
5 off UL/CSA certification not required
Round ø 60 mmde, en, fr, it
IP65 SRT1058873
5 off
Emergency-stop labelsBlank, yellow
Not suitable for engraving
Square 50 × 50 mm
IP65 SQ-GE063263
5 off UL/CSA certification not required
Round ø 60 mm
IP65 SR-GE063264
5 off
Accessories PageAssembly aids and accessories
15
Contact elementsN/O 3NC 3
Q25(L)PV...
→
→→
9
RMQ16 pilot devicesMarking plates
Illuminated selector switch actuator
...TQ18, ...TQ25, ...LQ18, ...LQ25
Marking plates– 01TQ18
08681601TQ25091121
20 off UL/CSA certification not required
– 02TQ18086859
02TQ25091149
– 03TQ18087766
03TQ25091184
– 04TQ18087834
04TQ25091442
– 05TQ18087867
05TQ25091471
– 06TQ18087920
06TQ25091506
With customized inscription via Labeleditor Notes
XQ18D-*-*1)
285286XQ25D-*-*1)
2852871 off
OFF 10TQ18087951
10TQ25091536
20 off
STOP or OFF 19TQ18054510
19TQ25054508
ON 11TQ18088007
11TQ25091562
START or ON 20TQ18054509
20TQ25054507
START or ON 21TQ18088061
21TQ25091586
Direction of movement 32TQ18088125
32TQ25091618
Direction of movement 36TQ18088275
36TQ25092592
Electr. voltage 34TQ18095386
34TQ25092563
Increase 37TQ18088315
37TQ25092608
Decrease 38TQ18088340
38TQ25092645
Manual actuation 40TQ18088389
40TQ25092709
Automatic 41TQ18088412
41TQ25092774
ON–OFF, momentary 43TQ18088426
43TQ25092791
Unlock 52TQ18088452
52TQ25092825
Lock 53TQ18088487
53TQ25092874
Loosen 54TQ18088512
54TQ25093013
Clamp 55TQ18088545
55TQ25093032
Liquid START 921TQ25047426
Liquid STOP 63TQ18088566
63TQ25093060
Horn 66TQ18088590
66TQ25093092
Spindle START 811TQ25053898
Spindle STOP 814TQ25047425
ON–OFF, maintained 899TQ18089232
899TQ25093063
Notes 1) When ordering, complete part no. XQ18D-*-* or XQ25D-*-*:1st wildcard * Color, e.g.: -R, -G, -B, -W, -Y, -S2nd wildcard * File name generated by Labeleditor Engineering
Illuminated pushbutton actuator, Indicator light, laser inscription Page 16
Button plates for pushbutton actuators
18 x 18 mm 25 × 25 mm
lobmySnoitpircsnI Part no.Article no.
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
10
→
→→
∧=∧=
RMQ16 pilot devicesMarking plates
Marking platesDirection of movement 911TQ18
089778911TQ25093100
20 off UL/CSA certification not required
Direction of movement 912TQ18090181
912TQ25093135
80TQ18088631
80TQ25093134
81TQ18088663
81TQ25093158
82TQ18088715
82TQ25093178
83TQ18088744
83TQ25093197
84TQ18088766
84TQ25093224
85TQ18088811
85TQ25093241
86TQ18089069
86TQ25093257
87TQ18089107
87TQ25093288
88TQ18089165
88TQ25093305
89TQ18089205
89TQ25093329
STOP 110TQ25093363
STOP 112TQ25063748
ARRET 310TQ25091446
START 111TQ25093399
START 122TQ25063746
MARCHE 311TQ25091475
AUS 117TQ25093434
AUS 113TQ25063749
OFF 217TQ25090911
ARRET 317TQ25091508
EIN 121TQ25093461
EIN 123TQ25063747
ON 221TQ25090934
MARCHE 321TQ25091563
Notes Illuminated pushbutton actuators, Indicator lights, Laser inscription Page 2/97
Button plates for pushbutton actuators
18 x 18 mm 25 × 25 mm
lobmySnoitpircsnI Part no.Article no.
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
...TQ18, ...TQ25
11
→
RMQ16 pilot devicesMarking plates
Illuminated selector switch actuator
Button plates for pushbutton actuators
25 × 25 mm
lobmySnoitpircsnI Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
Marking platesLINKS 134TQ25
09349420 off UL/CSA certification not required
LEFT 234TQ25090987
GAUCHE 334TQ25092567
RECHTS 135TQ25093527
RIGHT 235TQ25091009
DROITE 335TQ25092594
ZU 153TQ25090632
CLOSE 253TQ25091089
FERME 353TQ25092609
AUF 172TQ25090732
UP 272TQ25091124
MONTEE 372TQ25092711
AB 173TQ25090822
DOWN 273TQ25091152
DESCENTE 373TQ25092775
RESET 287TQ25091185
VOR 190TQ25090852
ZURÜCK 191TQ25090866
Notes Illuminated pushbutton actuators, Indicator lights, Laser inscription Page 2/97
...TQ25
12
→
RMQ16 pilot devicesInsert labels, legend plates
Insert labels, legend plates
Label mounts Q25T... with insert label
Insert labels for Q25T...-X label mount
Inscription Part no.Article no.
PriceSee price list
Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
Blank, black, can be engraved Q25TS-01046184
01SQ25037986
20 off UL/CSA certification not required
Blank, aluminum-colored, can be engraved
Q25TS-02046185
02SQ25038074
Blank, yellow, not for engraving Q25TGE-05063259
05SQ25063201
AUS Q25TS-117046194
EIN Q25TS-121046196
ON Q25TS-221046197
STOP Q25TS-110046190
110SQ25038507
START Q25TS-111046192
Störung Q25TS-150046198
FAULT Q25TS-250046199
DÉFAUT Q25TS-386072306
386SQ25072302
Betrieb Q25TS-183046201
EN SERVICE Q25TS-383046204
HAND 0 AUTO Q25TS-197072305
MAN. 0 AUTO Q25TS-397072307
NOT-AUS Q25TGE-199063260
199SQ25063200
EMERGENCY STOP Q25TGE-299063261
299SQ25063199
RUN 283SQ25038767
EN SERVICE 383SQ25038771
ARRET D'URGENCE 399SQ25048638
– Q25TS-10046186
10SQ25038268
– Q25TS-11046187
– Q25TS-32046188
– Q25TS-90046189
90SQ25038271
– Q25TS-93072304
93SQ25072300
With customized inscription through Labeleditor Notes
– XQ25TS-*-*109773
1 off UL/CSA certification not required
Notes When ordering, complete part no. XQ25TS-*-*:1st wildcard * Color: AL = aluminum, B = black, Y = yellow2nd wildcard * File extension
...SQ25, Q25T...
13
→
∧=
∧=
RMQ16 pilot devicesEnclosures
Illuminated selector switch actuator
EnclosuresColor RAL value Part no.
Article no.PriceSee price list
Std. pack Information relevant for export to North America
Surface mounting enclosures, IP651)
For conventional wiring or for mounting ILP1 printed circuit boardsWith plastic cover fixing screwsEnclosure base: black (RAL 9005)8 mounting locationsKnockout cable entriesBottom: 4 × M20Sides: 7 × M20
RAL 7035 I8046299
2 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
Flush mounting plate, IP651)
For conventional wiring or for mounting ELP 1 printed circuit boards8 mounting locations
RAL 7035 E8054423
1 off Product Standards
UL File No.UL CCNCSA File No.CSA Class No.NA CertificationDegree of Protection
RAL 9005 E8-SW065212
1 off
Customized complete unit
To order use form FO315 Data sheet in Online Catalog
* = Freely selectable customer identification or stock no.; max. 10 characters.
elbarugifnoC–– M16-COMBINATION-*232189
1 off
Blanking plates, IP65
For closing off of spare mounting locations in surface mounting enclosures or flush mounting panels in grid dimension 25 × 37.5 mm
RAL 9005 Q25AS036602
10 off UL/CSA certification not required
RAL 7035 Q25AGR048641
RAL 1004 Q25AGE048640
Label mounts without insert label
For additional marking of mounting locations in surface mounting enclosures or flush mounting panels in grid dimension 25 × 37.5 mmSuitable insert labels 2/94
RAL 9005 Q25TS-X036601
20 off UL/CSA certification not required
RAL 7035 Q25TGR-X063257
RAL 1004 Q25TGE-X063258
Notes Unused mounting locations must be closed off with blanking plates.Each used mounting location must be fitted with a label mount.
I8..., E8..., Q25A...
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;E29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
IEC/EN 60947-5; UL 508;CSA-C22.2 No. 14-05;E29184NKCR465523211-03UL Listed, CSA certifiedUL/CSA Type 1
14
→
→
RMQ16 pilot devicesAccessories
Accessories
Model Durability EN 60064 at tt
a = +25 °C
Color Part no.Article no.
Price See price list
Std. pack Information relevant for export to North America
average (AC)h
Filament lamp W 2 × 4.6 d6 V/1.0 W 10000 – WBGL6
09022350 off UL/CSA certification not required
12 V/1.0 W 15000 – WBGL12089968
50 off
24 - 28 V/1.0 W 7000 – WBGL24089247
100 off
Multiple LEDs W 2 × 4.6 dFor AC/DC 6 V/45 mA WBLED-GE6
05571110 off UL/CSA certification not required
WBLED-GN6055712
WBLED-RT6055713
12 V/24 mA WBLED-GE12055714WBLED-GN12055715WBLED-RT12055716
Single-chip LED W 2 × 4.6 dPositive pole to X1,Integral suppressor circuit up to 1000 V
18 - 30 V DC/7 - 12.5 mA
100000 LEDWB-Y208724
10 off UL/CSA certification not required
LEDWB-G208725
LEDWB-R208726
LEDWB-W208728LEDWB-B208727
Combination box spannerFor lock nut with bulb extractor
– – – R16-MS090297
10 off UL/CSA certification not required
Insulated ferruleFor fast-on connector 2.8 × 0.8 mm, connected from front
Ue > 50 V AC, U e > 120 V DC
– – – ISH2,8090267
100 off UL/CSA certification not required
Flat pin bushing2.8 × 0.8 mm for conductor cross-section 0.5 - 1 mm2
– – – LT306.022.3058863
100 off UL/CSA certification not required
Blanking plugs, IP65For closing off of spare mounting locations
For grid dimension18 × 18 mm
– Q18BS037985
10 off UL/CSA certification not required
For grid dimension25 × 25 mm
– Q25BS036976
10 off
Anti-rotation featureGuard-ring as anti-rotation feature for all RMQ16 pushbutton
– – – VS046301
50 off UL/CSA certification not required
LEDWB..., WBLED..., WBGL...
15
60000
60000
RMQ16 pilot devicesAccessories
For use with Color Part no.Article no.
PriceSee price list
Std. pack Information relevant for export to North America
IP20, screw adapter
Conductor cross-sections 1 × 1.5 mm2, 2 × 0.75 mm2
For NC SRA01028101
20 off UL/CSA certification not required
For N/O SRA10028100
For lamp socket SRAL028099
Individual keys
Standard lock mechanism, black, each colour corresponds to a specific lock mechanism
– ES16065190
10 off UL/CSA certification not required
– ES16-GN030742
5 off
– ES16-RT030741
– ES16-WS030743
– ES16-BL030744
Transparent insert plates
For better light diffusionmm81×81noisnemiddirgroF– 01LQ18
09023120 off UL/CSA certification not required
mm52×52noisnemiddirgroF– 01LQ25093180
Lenses for illuminated pushbutton actuators
With customized inscription to order via Labeleditor Notes
For grid dimension 18 × 18 mm – XQ18LT-*-*285288
1 off UL/CSA certification not required
For grid dimension 25 × 25 mm – XQ25LT-*-*285289
Lenses for indicator lights, flush
With customized inscription to order via Labeleditor Notes
–mm81×81noisnemiddirgroF– XQ18LF-*-*285310
1 off UL/CSA certification not required
–mm52×52noisnemiddirgroF– XQ25LF-*-*285311
Insert labels for label mounts
For laser inscription with Labeleditor Notes
–...-ST52QroF– XQ25TS-*-*109773
1 off
Notes When ordering, complete part no. XQ...-*-*:1st wildcard * Color, e.g.: -R, -G, -B, -W, -Y, -S2nd wildcard * file name generated by Labeleditor Engineering
SRA..., ES16..., XQ18-..., XQ25-...
16
→
→
→
→∧=∧=
RMQ16 pilot devicesRMQ16
RMQ16
Technical data
Contact elements
Illuminated pushbuttons (maintained)
Illuminated selector pushbuttons
Indicator lights
General
Standards IEC/EN 60947, VDE 0660
01xsnoitarepOlacinahcem,napsefiL 6 > 100 > 30 > 3 –
h/snoitarepOycneuqerfgnitarepO ≦ 3600 ≦ 1800 ≦ 1800 –
NecrofgnitautcA 3 4 – –
mNeuqrotgnitarepO – – ≦ 0.2 –
Protection type,IEC/EN 60529
IP65 IP65 IP65
Climatic proofing Damp heat, constant as per IEC 60068-2-78Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
C°nepO -25 - +60 -25 - +60 -25 - +60 -25 - +60
C°detaluspacnE -25 - +40 -25 - +40 -25 - +40 -25 - +40
Mounting position Any Any Any Any
Mechanical shock resistance to IEC 60068-2-27 Shock duration 11 ms, half-sinusoidal
g > 40 > 40 > 40 > 40
mmyticapaclanimreT 2 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0
Blade terminal 2.8 × 0.8 mm to DIN 46244
Flat pin bushing 2.8 × 0.8 mm to DIN 46247 and IEC 60760
Contacts
Rated impulse withstand voltage U imp V AC 4000 800 800 800
UegatlovnoitalusnidetaR i V 250 250 250 250
Overvoltage category/pollution degree III/3 III/3 III/3 III/3
UegatlovlanoitarepodetaR e V AC 250 24 24 24
Control circuit reliability
HAm5/CDV42tA F Fault probability < 10-7 (i.e. 1 failure to 10 7operations) –
HAm1/CDV5tA F Fault probability < 5 × 10 -6 (i.e. 1 failure to 5 × 10 6operations) –
Use of ISH insulated ferrule 2.8 On >24 V AC/DC recommendedOn >50 V AC or 120 V DC mandatory, also on unoccupied blade terminals
Max. short-circuit protective device
.ontraPsselesuF FAZ-B6/1 – – –
ALg/GgesuF 10 – – –
Switching capacity
Rated operation current
AC-15
IV42 e A 4 – – –
IV84 e A 4 – – –
IV011 e A 4 – – –
IV032 e A 4 – – –
DC-13
IV42 e A 3 – – –
IV24 e A 1 – – –
IV06 e A 0.8 – – –
IV011 e A 0.5 – – –
IV022 e A 0.2 – – –
Unit
17
RMQ16 pilot devicesRMQ16
Pushbutton actuators (maintained)
Selector switch actuators
Key-operated pushbutton actuators
Emergency switching-off pushbutton actuatorss
General
Standards IEC/EN 60947, VDE 0660
IEC/EN 60947, VDE 0660
IEC/EN 60947, VDE 0660
IEC/EN 60947, VDE 0660
Lifespan, mechanical Operations 6 > 3 > 3 > 3 > 0.1
Operating frequency Operations/h ≦ 1800 ≦ 1800 ≦ 1800 ≦ 600
NecrofgnitautcA 4 – – 25
mNeuqrotgnitarepO – 0.2 0.4 –
Protection type, IEC/EN 60529 IP65 IP65 IP65 IP65
Climatic proofing Damp heat, constant as per IEC 60068-2-78Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
C°nepO -25 - +60 -25 - +60 -25 - +60 -25 - +60
C°detaluspacnE -25 - +40 -25 - +40 -25 - +40 -25 - +40
Mounting position Any Any Any Any
Mechanical shock resistance to IEC 60068-2-27 Shock duration 11 ms, half-sinusoidal
g > 40 > 40 > 40 > 40
mmyticapaclanimreT 2 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0 0.5 - 1.0
Blade terminal 2.8 × 0.8 mm to DIN 46244
Flat pin bushing 2.8 × 0.8 mm to DIN 46247 and IEC 60760
Durability, electrical AC-15 to IEC/EN 60947-5-1 at 230 V Ie = rated operational current
4321.00.9
0.80.7
0.60.50.40.30.20.1
0.1
0.2
0.3
0.4
0.50.60.70.80.91.0
2
3
4
5
E10
E01
x 106
Ie [A]
x 10
Unit
18
RMQ16 pilot devicesRMQ16
RMQ16
DimensionsActuating and indicator elementsSquare style Q...BS
...KW...Q...S...Q...-D...Q
Q...DR-...
...KWL...Q...-HL...Q...-TL...Q
Q...LTR-...
Q...LF-...
Q25PV...
Q25LPV...
Front fixingQ18, Q25, E89, SRA, VS, M16
Drilling dimensions Grid dimension to IEC/EN 60947 Minimum grid spacing dimension Mounting distance81Q52Q
① Exposed conductive part (metal)
1...6 mm
39 25 18
18
M16 x 1
24 4
11 39
13 17 39
26 39
11 49 16 49 26 49
28
25
o 28
37 39
49
E01, E10
6 6
18
6 49
58
ISH 2.
16,2 0+0,2
25
25
18
18
5 a
5
Q18, Q25
19
RMQ16 pilot devicesRMQ16
Flush mounting panel RMQ16 screw adapter Anti-rotation feature
E8... SV...ARS
Size of cutout: 92 × 94
RMQ16 housing extension RMQ16 label mount
I8... Q25TS-...
Blanking plates
Q25AS
Fixing hole: 2 x 4.5 mm
Distance: 128 mm
92
12.5
25.1
136 7
25.1 25.1
37.5
100
25
18.5
5.6
22
17.8
17.8
14.9
153
30 30
0.5
25.1
128
37.5
25.1 25.1
50
23.4
30
100
4 x M20
3 x M20
46.8
2 x M20
153
100
75
32
25
25
38
12
13
38
13
12
4
25
20
o
© 2011 Eaton CorporationAll Rights ReservedPrinted in ChinaRMQ16-EN(12-2011)
Eaton Corporation
Asia Pacific Headquarter
No.3, Lane 280, Linhong Road, Changning District, Shanghai 200335Tel:86-21-52000099 Fax:86-21-52000200
Eaton is dedicated to ensuring that reliable, efficient and safe power is available when it’s needed most. With unparalleled knowledge of electrical power management across industries, experts at Eaton deliver customized, integrated solutions to solve our customers’ most critical challenges.
Our focus is on delivering the right solution for the application. But, decision makers demand more than just innovative products. They turn to Eaton for an unwavering commitment to personal support that makes customer success a top priority. For more information, visit www.eaton.com/electrical.
Eaton is a registered trademark of Eaton Corporation.
All trademarks are property of their respective owners.