PureFlow PEX Accessories - 2010 Catalog
Transcript of PureFlow PEX Accessories - 2010 Catalog
153
PureFlow
Pu
reF
low
PureFlow
PEX accessories
154
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Zero Lead PureFlow® PEX
accessories
CTS (OD) x Length
ZERO LEAD LAV RISERSThese risers are used to make connections from a shut off valve at the wall to the supply connection on a lav. Compression ferrules are included. Lav nuts are sold separately.
2model V5080
5811258115581205813058136
1/4 (3/8) x 12 1001/4 (3/8) x 15 1001/4 (3/8) x 20 1001/4 (3/8) x 30 1001/4 (3/8) x 36 100
0.030.0350.050.070.08
XXXXXXXXXX
CTS (OD) x Length
ZERO LEAD CLOSET RISERSThese risers are used to make connections from a shut off valve at the wall to the supply connection on a toilet. Compression ferrules are included. Closet nuts are sold separately.
2model V5081
5711257115571205713057136
1/4 (3/8) x 12 1001/4 (3/8) x 15 1001/4 (3/8) x 20 1001/4 (3/8) x 30 1001/4 (3/8) x 36 100
0.030.0350.050.08
0.085
XXXXXXXXXX
CTS (OD)
RISER ACCESSORIES - LAV NUTUse these lav nuts to connect the supply end of a lav riser to a supply connection on a lav.
2model V5089
33705 1/2 100XX
CTS (OD)
RISER ACCESSORIES - BALLCOCK NUTUse these ballcock nuts to connect the supply end of a closet riser to a supply connection on a toilet.
2model V5089.1
53017 3/4 100XX
ZERO LEAD FERRULESThese plastic ferrules are to be used when connecting Viega PEX with compression connections such as MANABLOC compression fittings and risers.
2model V5085
5300053005530155302053040
1/8 1001/4 1003/8 501/2 1003/4 100
0.0010.0010.0010.003
XXXXXXXXXX
155
PureFlow
Pu
reF
low
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pu
reF
low
ZERO LEAD STAINLESS STEEL COMPRESSION INSERT STIFFENERSThe stainless steel insert stiffeners are used to maintain a firm shape inside ViegaPEX tubing when making compression connections such as MANABLOC compression fittings.
2model V5086
56100561105612056140
1/4 1003/8 501/2 503/4 50
0.0010.0290.0050.01
XXXXXXXX
PLASTIC ESCUTCHEONEscutcheons are used to provide a clean finished look where tubing or stub-outs are exiting the wall at a fixture location. All escutcheons are white.
SINGLEmodel V5088
531155312053122
3/8 501/2 501/2 (for threaded connection) 50
0.0120.0120.01
XXXXXX
DOUBLE
2model V5088.1
5311653121
3/8 251/2 25
0.0170.016
XXXX
FINISHING SLEEVESUse these chrome sleeves to cover exposed ViegaPEX tubing between walls and valves. Each sleeve is 3.5" long.
2model 2800.5US
5250052520
3/8 101/2 10
0.050.062
XXXX
DECORATIVE SLEEVINGUse this decorative sleeving to cover exposed ViegaPEX tubing. Available in 3' straight lengths.
2model V5098
5260052620
3/8 501/2 50
0.1250.138
XXXX
COLORED SLEEVINGUse this colored plastic sleeving to mark and identify hot and cold sections of ViegaPEX tubing. Fits 3/8" and 1/2" ViegaPEX tubing. Each sleeve is 4.5" long and designed to work with 3/8" or 1/2" tubing.
2model 2852US
5402054520
3/8 & 1/2 - Red 103/8 & 1/2 - Blue 10
0.040.04
XXXX
156
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
DROP EAR BEND SUPPORTSUse drop ear bend supports to guide ViegaPEX tubing that exits floors or walls at a 90º angle. Light and durable plastic.
Not for use with FostaPEX.
2model 2850.1US
5050050520
3/8 251/2 25
0.080.076
XXXX
SNAP-IN BEND SUPPORTSSnap-in bend supports provide fast, simple stub-outs in all types of framing. Bracket attaches to studs and bend supports snap in on 2 inch centers.
Not for use with FostaPEX.
BEND SUPPORTmodel 2850.3US
51021 1/2 100 0.086XX
BRACKET
2model 2850.4US
51022 1/2 50 0.506XX
PLASTIC BEND SUPPORTSPlastic bend supports allow tight 90º bends to be made in ViegaPEX tubing without kinking.
Not for use with FostaPEX.
2model 2850.2US
5100051020510405106051070
3/8 251/2 255/8 & 3/4 251 251 1/4 5
0.0480.0480.160.260.44
XXXXXXXXXX
PLASTIC BEND SUPPORTS FOR SLABPlastic bend supports allow tight bends to be made at concrete entry points and protect ViegaPEX tubing from abrasion.
Not for use with FostaPEX.
2model 2851US
15106151071510815111
3/8 101/2 105/8 & 3/4 101 1
0.090.140.230.83
XXXXXXXX
TURN-OUT CLAMPSTurn-out clamps are used to secure 3/8" ViegaPEX tubing coming out of the wall at lavs, sinks, and toilets. They can also be used with1/2" ViegaPEX tubing with standard elbows or stub-out elbows.
Not for use with FostaPEX.
2model V5071
52130 3/8 & 1/2 25 0.075XX
157
PureFlow
Pu
reF
low
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pu
reF
low
FULL CLAMPSFull clamps nail in place to hold ViegaPEX tubing securely. Nail provided with each clamp.
2model V5092
5222052240
1/2 1003/4 50
0.0130.019
XXXX
J-CLAMP TUBING FASTENERSUse these tubing fasteners anywhere you need to secure ViegaPEX tubing. Nail provided with each clamp for attachment to studs, joists, subfloors, etc.
2model 2860US
52000520205204052060
3/8 1001/2 1003/4 1001 100
0.0080.0090.02
0.022
XXXXXXXX
ECONOMY PEX TUBING CLAMPSEconomy clamps nail or screw in place to hold ViegaPEX tubing securely.
2model V5095
52100521105212052140
1/4 1003/8 1001/2 1003/4 50
0.0020.0020.0030.005
XXXXXXXX
SNAP CLIPNylon clips screw in place and tubing snaps in. Clips flex to hold ViegaPEX tubing securely.
SINGLEmodel 2862US
58015580205804058060
3/8 1001/2 1003/4 1001 50
0.0060.0110.01
0.014
XXXXXXXX
DOUBLE
2model 2862.1US
5801658021
3/8 501/2 50
0.0120.012
XXXX
LOCK CLIPSDouble ratchet clips allow easy and secure installation of ViegaPEX and FostaPEX tubing. Fasteners can be connected to allow neat installation of multiple lines. Clips install quickly using drywall or wood screws.For 5/8" ViegaPEX Barrier use 1/2" Lock Clip.For 5/8" FostaPEX use 3/4" Lock Clip.
2model 2863US
580715807258073580745807558076
3/8 1001/2 1003/4 501 501 1/4 501 1/2 25
0.0140.0160.0180.0280.030.04
XXXXXXXXXXXX
158
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
MULTI CLIPUse this tubing fastener anywhere you need to support 3/8” through 1” ViegaPEX, ViegaPEX Barrier or FostaPEX tubing. Self drilling screw provided for attachment to studs, joists, subfloors, etc.
2model 2867US
52006 3/8 - 1 100 0.025XX
in x ft
U-CHANNEL FASTENERSold in 6.5' lengths, breaks easily into short sections. 1/2" and 5/8" tubing clips into channel on 2 inch centers, 3/4" tubing clips into channel on 4 inch centers. Great for use near manifolds to keep multiple runs of tubing neat and secure. Predrilled holes allow for fastening to subfloor, insulation and metal decks.
2model 2864US
15310 1/2 x 6 1/2 16 1.10XX
SUSPENSION CLIP TUBING FASTENERSThese suspension type hangers can be used to support PEX tubing hanging below joists or to isolate tubing passing through joists from abrasion.
2model 2861US
5502055040550605507055080
1/2 503/4 501 501 1/4 501 1/2 25
0.010.0120.0180.0260.036
XXXXXXXXXX
TUBING INSULATORSThese suspension type tubing hangers can be used to isolate tubing passing through joists from abrasion (fits 1-3/8" hole).
2model V5094
5510055165551205514055160
3/8 503/8-1 251/2 503/4 501 50
0.0180.0140.0190.0140.04
XXXXXXXXXX
BUNDLE TIESNylon bundle ties allow multiple lines of ViegaPEX or FostaPEX tubing to be held together keeping the installation neat and secure. Pipethon® Straps are ideal for bundling MANABLOC distribution lines.
14" ZIP TIESmodel V5097
43714 100 0.013XX
PIPETHON STRAPS
2model V5097.1
43701 20 0.06XX
159
PureFlow
Pu
reF
low
StockCode
Dimension Qty Approx.wt./lb. Each
List PriceEach ($)
Pu
reF
low
MOVABLE METAL FRAME UNCOILERSTwo wheel uncoiler for ViegaPEX plumbing tubing. Maximum coil size for 3/8" & 1/2" tubing is 1000' and for 3/4" tubing is 500'. This uncoiler is not designed for 1" or larger tubing. Holds coils vertically. Comes on wheeled based to allow movement of the uncoiler and tubing easily from one location to the next.
5model V5061
Not for use with FostaPEX!
53509 1 70.98XX
Maximum PEX Dimension
TUBING CUTTERSThese tubing cutters allow an even, square cut. Ratcheting cutter recommended for FostaPEX
BASIC - Up to 1" PEXmodel 2889.2US
21304 1 1 0.30XX
BASIC - Up to 1 1/2" PEXmodel V5055
21307 1 1/2 1 0.31XX
RATCHETING - Up to 1 1/4" PEXmodel V5057
53541 1 1/4 1 1.15XX
RATCHETING - Up to 1 1/2" PEXmodel 2840
53551 1 1/2 1 0.954XX
WHEEL CUTTER - Up to 2" PEXmodel V5059
53641 2 1 1.789XX
REPLACEMENT BLADE for 21307model V5055.1
21317 1 0.08XX
REPLACEMENT BLADE for 53541model V5057.1
53542 1 0.19XX
REPLACEMENT BLADE for 53641
5model V5059.1
53642 1 0.01XX
160
NOTES