ISPE Greater Los Angeles Chapter Invites you to a Half Day Meeting

Pure Steam System Design, Construction,

Operation and Validation How much do you understand steam systems? Pure Steam? Plant Steam?

Come to learn it all!

Wednesday, July 22, 2015

Sponsorships Available

At Murray Company John W. Odom Training Facility, 18416 South Santa Fe Ave.

Rancho Dominguez, CA 90221 Program Managers: Tom Golden, Unbound Consulting (ISPE LA Chapter President) Greg Huff, VP Advanced Technologies, Murray Company Speakers: Bill Harms, Account Executive / Steam Master, Spirax Sarco Drew Coleman, Principal, Biodynamics International Daryl Roll, Technology Officer, Astro Pak Corporation Synopsis: This session will cover the Fundamentals of Steam, Understanding Clean and Pure Steam, Operational Issue and Corrosion in Steam Systems

ISPE Greater Los Angeles Chapter Half Day Meeting Pure Steam System Design, Construction,

Operation and Validation Wednesday, July 22, 2015

At Murray Company

Schedule with Topics and Speakers:

12:30 - 1:00 pm Registration and Networking 1:00 - 2:30 pm Steam Training Speaker: Bill Harms, Account Executive / Steam Master, Spirax Sarco Benefits of Steam Driving Standards Purity issues General design requirements Clean and pure steam generation Clean and pure steam distribution Key applications Utility Applications Steam Trap Monitoring & Testing Condensate Management Energy Recovery Flow Measurement Pressure Control Helpful Resources 2:30 - 2:45 pm Break 2:45 - 3:45 pm Design, Validation and Maintenance Speaker: Drew Coleman, Principal, Biodynamics International Designing With Validation In Mind Validation of Pure Steam Systems Useful Design Calculations Safety Precautions Alert/Action Limits Standard Excursion Responses

Design, Validation, and Maintenance Concerns 3:45 - 4:00 pm Break 4:00 - 5:00 pm Case Studies of Steam Corrosion and Removal Techniques Speakers: Drew Coleman, Principal, Biodynamics International Daryl Roll, Technology Officer, Astro Pak Corporation Pure Steam System Corrosion Overview Field Observations and Comments Case Studies and Scanning Electron Microscopic Observations, Auger, and ESCA Testing Results Removal of Corrosion Byproducts Utilizing Organic Acids Versus Mineral Acids Conclusions Derived From Investigation Questions and Discussion Session 5:00 - 6:00 pm Happy Hour: Light Snacks and Drinks courtesy of Murray Company Optional Tour of Murray Company Fabrication Shop

REGISTRATION FORM and INSTRUCTIONS

Pure Steam System Design, Construction, Operation and Validation

Wednesday, July 22, 2015 Name badges will be given at the event. For an immediate receipt, please use the Chapter's online processing system. Register Online at: http://atdevents.net/register.php

ISPE LA, SD, SF Members: If you are an ISPE Member in California, please do not set up a new account as you should already be in our system. Please email Rob Fleming (rob.fleming@yahoo.com) for assistance with your username and/or password. ISPE Members of other Chapters: If you are a Member of another ISPE Chapter, please fax your registration with your Member number and Chapter affiliation. Non Members: If you do not have an account on our system, you can set one up on the site using letters (not numbers) as your username. ALL: If you need help setting up your account or if you are having problems with the site or need a new password, please email Rob Fleming (rob.fleming@yahoo.com) for assistance.

FAX REGISTRATION: Complete the Registration Form with a credit card payment and Fax to (949) 266-8461. PAY BY CHECK: Register online. Under "Payment Type" select "Company or personal check" or fax your registration form to (949) 266-8461. Then mail your check no later than one week prior to the meeting to ensure it is received in time. Make checks payable to: ISPE Greater Los Angeles Chapter, 5319 University Dr., Suite 641, Irvine, CA 92612. Tax ID#95-4452996 Cancellations must be received in writing via fax or email to:ksyre@cox.net by July 13, 2015 for refund. After the cancellation date if you have reserved a space but do not attend, your payment MUST be remitted. For Questions regarding registration or receipts, please contact Rob Fleming: rob.fleming@yahoo.com Name badges will be given at the event.

________$95 ISPE Members ________Free for Murray Company Employees

________$135 NonMembers

________$30 Students and Government

________$50 ISPE Young Professional (YP) Member

________$500 Event Sponsor

Sponsors receive a 6' exhibit table and two admissions to the meeting.

If paying by credit card, please check type: ____ VISA ____ MASTERCARD ____ AMERICAN EXPRESS

Name on Card:__________________________________________________________________

Card #:_________________________________________________________________________

Expiration Date:__________ Signature:_______________________________________________

Please cut and paste your contact information here, or fill in the appropriate spaces: NAME:_____________________________________________________________________________

TITLE:_____________________________________________________________________________

COMPANY:_________________________________________________________________________

E-MAIL: ___________________________________________________________________________

ADDRESS:__________________________________________________________________________

CITY:______________________________________________STATE: ________ZIP:______________

PHONE:__________________________________________FAX:_____________________________

DRIVING DIRECTIONS Murray Company John W. Odom Training Facility 18416 South Santa Fe Ave. Rancho Dominguez, CA 90221 From Irvine Take 405 Freeway North. – 26.0 mi. Take the Alameda St exit – 0.3 mi. Turn right onto CA-47 N/Alameda St – 0.2 mi. Slight right onto Santa Fe Ave – 0.6 mi. Murray Company will be on the Right hand side. From LAX Take 405 Freeway South. – 8.0 mi. Take the exit onto I-110 N toward Los Angeles – 1.5 mi. Take the exit onto CA-91 E – 4.0 mi. Take the Santa Fe Ave exit – 0.2 mi. Turn right onto Santa Fe Ave – 0.6 mi. Murray Company will be on the Right hand side. It is recommended that you look up directions from your starting point to make sure you have the best driving directions.