pumps• Molasses • Soap • Additives • Polyol • Viscose • Sulphate soap • Maltose •...

Sdk9 /0514 464384

dl`hk9 r`kdr?u`mftardpumps.co.uk

www.vanguardpumps.co.uk

2 vine street bollington

macclesfield cheshire sk10 5qb

general industry gear pumps

heavy duty gear pumps

carbon steel gear pumps

stainless steel gear pumps

magnetic drive gear pumps

miniature gear pumps

our aim is to provide the most suitable pump for the application

we have far more pumps available to us than is possible to show

we select pumps in house and can customise standard pumps

dosing gear pumps

rotary piston pumps

5

ROTAN®, One of the world’s Leading pumps within Internal Gear Pumps

The internal gear pump principle was developed in 1915 by a Danish American.

In 1921, he licensed a Danish company to manu-facture the pumps, which have been continuously marketed worldwide under the ROTAN® name. The unique, modular concept of ROTAN® pumps is gener-ally recognized as the most advanced internal gear pump design available today.

The ROTAN® internal gear pump provides favourable flow conditions, as the direction of the liquid flow is only changed slightly through the pump.

This means that superior self-priming capability and gentle liquid handling are achieved, and also that highly viscous liquids can be pumped. ROTAN® pumps offer the following additional advantages:

• Pumping in either direction

• Easy maintenance and inspection based on themodular design

• Sturdy and uncomplicated construction with onlytwo rotating parts and one shaft seal

• Comprehensive choice of configurations availableas standard

• Genuine back pull-out design

• End clearance axial adjustment

g g g g

Method of operation

Liquid inlet Passage of liquid Liquid outlet

All ROTAN® pumps are hydrostatically and performance tested and get their own certifcate before leaving the factory.

ROTAN® pumps can be supplied in accordance with the ATEX Directive for use in potentially explosive environments.

The ROTAN® pumps are certified by Physikalisch-Technische Bundesanstalt PTB, Postfach 33 45, 38023 Braunschweig, registration number 03 ATEX D052.

CE

ROTAN® GP – General Purpose Pumps

ROTAN® HD – Heavy Duty Pumps

Pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers. A close-coupled OEM model is also available

GP pumps are designed for use with IEC or NEMA flange motors. Available with 90° angular configuration.

Pumping of:

• Clean oil• Glycol• Vegetable oil• Solvents• Lube oil• Waste oil• Fish oil

Pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically designed for difficult applications and those in-volving high viscosity liquids.

HD pumps are known by their sturdy and simple construction. Available with 90° angular configu-ration.

Pumping of:

• Oil• Asphalt• Chocolate• Paint/Lacquer• Molasses• Soap• Additives• Polyol

• Viscose• Sulphate soap• Maltose• Grease• Pitch• Base oil• Bitumen• Polyester

Capacity Range Up to 50 m3/h / 220 gpm

Speed Up to 1750 rpm

Differential Pressure

Up to 16 bar / 232 psi

Suction Lift Up to 0,5 / 7.25 psi bar vacuum while primingUp to 0,8 bar / 11.6 psi vacuumwhile pumping

Viscosity Range Up to 7500 cSt

Temperature Up to 150°C / 302°F





Suction Lift Up to 0,5 bar / 7.25 psi vacuumwhile primingUp to 0,8 bar / 11.6 psi vacuumwhile pumping

Viscosity Range Up to 250,000 cSt


tel: 01625 575495 email: [email protected]

ROTAN® PD – Petrochemical Duty Pumps

ROTAN® CD – Chemical Duty Pumps

Pumps in stainless steel, designed to handle corrosive liquids.CD pumps are designed for handling corrosive liquids, primarily found in the chemical process-ing, food and pharmaceutical industries.

Available with 90° angular configuration.

Pumping of:

• Organic acid• Fatty acid• Alkali• Caustic soda• Polymer solutions• Soap• Shampoo• Animal fat

• Vegetable fat• Chocolate• Other special

fluids• Resin• Paint• Rosin

Pumping of:

• Fuel• Oil• Gasoline• Lube oil• Grease• Other hydrocar-

bon based fluids

• Additives• Bitumen• Polystyrene• Wax

PD pumps are designed for refinery and petro-chemical applications, all pressure-containing components are in carbon steel. Design pressure according to ANSI 300 Lbs or Pn40.

PD pumps meet API 676 standards with only a few exceptions.

Available with 90° angular configurations.






















tel: 01625 575495 email: [email protected]

ROTAN® ED – Environmental Duty Pumps

Magnetically coupled pumps for ultimate protection against leakage.

As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with tradi-tionally sealed pumps, especially where the application requires the use of double mechanical shaft seals.

Often these applications are very different, resulting in the seals and support system requiring regular attention and/or replacement. Thus, the life cycle costs for ED pumps are generally much lower than for pumps using two seals.

Available with 90° angular configuration.

Where no leakage, liquid or gaseous, is allowed.

Pumping of:

• Isocyanate• Solvents• Hazardous organic liquids• Printing ink• Resin• Pitch• Alkyd resin• Soyabean oil• Linseed oil• Monomers• Polyol• Corn syrup

Materials Cast iron, carbon steel or stain-less steel








Common Applications:

Suction(Discharge)

Discharge(Suction)

ROTAN® ED – Advantages

One of the distinguished features of the ROTAN® ED range is that the pumped medium is hermetically contained in the system since the magnetic coupling eliminates the need for a shaft and mechanical seal, which could allow gaseous exchange between the pumped medium and the atmosphere.Unlike centrifugal pumps, the ROTAN® ED pump of-fers gentle liquid handling and a high priming vacu-um as well as the pumping of highly viscous liquids.

• Dynamic axial balancing system, minimizingaxial loads, saving energy and increasing life(see picture on the right side)

• Patented cooling system, based on an integralpump, eliminating the need for external cooling(see picture on the right side)

• Maximum protection against leakage by in-creased safety provided by a completely en-closed magnetic coupling housing

• Optimal for outdoor installation, the completelyenclosed magnetic coupling housing protectsthe external magnets from contact with the sur-rounding atmosphere

• Large choice of slide bearing materials availableas standard, e.g. cast iron, bronze, carbon andtungsten carbide

• Standard magnet material is neodymium-iron-boron.

• Optional samarium cobalt permanent magnetspermit operating temperatures up to 250°C

• Pumping in either direction• External heating jackets for both front cover

and magnetic coupling housing available asstandard optional features

• Genuine back-pullout design• Standard as close-coupled, optional with bare

shaft end• Both internal and external canister protection

Materials Cast iron, carbon steel or stain-less steel








The ROTAN® pump is provided with a patented principle of circulation of the pump medium around the magnetic coupling. Simple “centrifugal pump” shaped channels in the shaft/rotor ensure continual replacement of the liquid in the magnetic coupling which has been heated by friction and re-circulation. This also ensures efficient lubrication and heat trans-fer from the slide bearings.

The ROTAN® ED pump can be used where leakage would be costly, e.g. highly refined, expensive chem-icals, or where long overhaul intervals are required. This reduces maintanance labour costs and loss of process time, where atmospheric air would harm the pumped medium.

Typical construction materials of the ED pump are cast iron, stainless steel or carbon steel. For stan-

dard applications the ED pump is usually delivered with slide bearings in bronze/steel. As alternative the pump can be delivered with bearings in cast iron/steel for light applications, in carbon/steel for media with poor lubricating properties or in tungsten car-bide/tungsten carbide for abrasive media, particu-larly with low wear rate.

The magnetic coupling is provided with the number of magnets required for the power to be transmit-ted. The mateiral is neodymium-iron-boron for oper-ating temperatures up to 150°C or samarium-cobalt for operating temperatures higher than 150°C. Both magnetic materials are rare earth types which can be magnetized approx. 10 times more than iron.

The ROTAN® ED pump is designed as a monobloc unit, i.e. directly coupled with an IEC-motor, gearmo-tor or gearbox with an IEC-motor. As an alternative, a free shaft end unit can be assembled with a drive unit by means of a flexible coupling.

Reversible pumping capability allows changing flow direction of the pump simply by reversing the motor direction. The ED pump is increasingly cost effective in the most severe operation conditions including high pressures, high viscosities, high temperatures, corrosive and high flow applications.

Abrasion resistant shafts, bearings, and thrust wash-ers are available when abrasive materials are to be pumped. The ROTAN® ED pump is proven in most difficult applications including coal tar slurries and filled polyols. Other magnetically driven pumps with balanced rotor designs allow the rotor to make con-tact with balance plates and are not designed for abrasive service.

External jacketing of the pump head and magnet area are standard options when material in the pump and magnet area requires heat transfer.

ROTAN® has for many years supplied pumps to the asphalt industry, and be-ing a pump manufacturer we are too experienced to claim that it is easy to pump asphalt. We do however claim to have the best solution for most applica-tions within this industry, as our experi-ence as well as feedback from custom-ers have been used for improvement and development.

Electrical heating as an alternative to heating by liquid/steam, is the most re-cent result of this. The heating source is a temperature probe, mounted in the idler pin of the pump.

As the idler pin is placed in the middle of the pump/liquid, the heating is con-centrated where it is best used. For this reason it is often sufficient with heating at the front end, but heating of the rear end is of course also a possibility.

Electrical Heating

Chocolate Pump

A speciality within the ROTAN® range is the ROTAN® chocolate pump for pumping cocoa mass and chocolate. This special configuration has been uti-lized in the HD and CD ranges with all its advantages:

• Configuration with special clear-ances between the fixed andthe rotating parts to protect thechocolate from excessive tempera-tures.

• Casing available as inline (stand-ard) or 90° angular configuration(BCHD).

• Specially designed externally lubri-cated main bearing.

tel: 01625 575495

Email: [email protected]

www.vanguardpumps.co.uk

Lubrication & Circulation

Custom OEM Solutions

The functionality of Tuthill’s Lubrication and Circulation pumps with several porting and drive options makes these pumps and assemblies ideal for OEM applications. Designed to integrate directly into manufacturers’ equipment, our line of customized solutions provides variety and flexibility.

• Compact andflexible drive options

• Flow rates to 13.7USGPM (3 m3/hr)

• Pressures to 500 PSI (34 bar)

Cartridge Pumps• Several port and drive options• Flow rates to 6 GPM (1.4 m3/hr)• Pressures to 150 PSI (10 bar)

• Closed coupled designeliminates components

• Smaller footprint• Mounts directly to NEMA and IEC motors• Flow Rates up to 32.5 GPM (7.38 m3/hr)• Pressure up to 100 PSI (7 bar)

Stripped Pumps• Partial pump assemblies built directly

into OEM equipment• Flow rates to 84 GPM (19 m3/hr)• Pressures to 150 PSI (10 bar)

• Flexible mounting, sealing,and driving options

• Flow rates to 84 USGPM(19 m3/hr)

• Pressures to 250 PSI (17 bar)

G and TR Pumps• Gerotor and torque ring pump design

with multiple porting options• Flow rates to 20 GPM (3 m3/hr)• Pressures to 100 PSI (7 bar)

• Internal gear pump design• Flow rates to 13.7 USGPM

(3 m3/hr)• Pressures to 300 psi

(20 bar)• Multiple porting options with side ports as standard• Cast Iron construction

L Series

CC Series

C Series

1000 Series

General Purpose Markets and Applications

• Compressors• Transmissions• Gearboxes

• Engines• Fuel Oil

• Filtration• Bulk Transfer

Tuthill provides OEM pump units from our GlobalGear family for applications requiring either higher flow or heavy duty service designs. Customized designs are available for OEM’s that include close coupled mounting, hydraulic motor drives, belt drives, and seal-less magnetic couplings. High suction pressure, high fluid temperature, and cold start designs are available for specific application challenges. Pump construction materials include cast iron, cast steel, and stainless steel. Typical applications include lube oil pump-motor assemblies for compressor and rotating equipment skids, pump units for hot oil systems and hot asphalt packages.

Tuthill offers HD product for the most demanding applications. The HD series is capable of handling multiple pumping challenges that may include large viscosity and temperature ranges and the presence of solids in a single application. HD pumps can offer system builders and OEM’s an attractive alternative to progressive cavity pumps and air-operated diaphragm pumps. HD pumps will tolerate intermittent run dry, are relatively compact, and will pump liquids with viscosities that range from thin to very thick. They will handle temperatures up to 525ºF and are energy efficient. Standard pump construction is in Ductile Iron or 316 Stainless Steel.

OEM applications for HD pumps include: • Waste water systems builders• Fryer oil recovery systems• Black liquor soap• Paper coating packages• Waste fuel handling systems• Starch handling systems

Industrial DutyGlobalGear® Series

HD Series

• Chemical Processing• Petroleum Products• Asphalt• Food & Beverage Processing

• Inks, Paints and Pigments• Pulp and Paper• Bulk Transfer

Industrial Process Markets and Applications

• Back pull-out design provides ease of maintenance• Flow rates to 550 USGPH (124.9 m3/hr)• Pressures to 200 psi (14 bar)• Viscosities to 1,000,000 ssu (220,000 cst)

• Capable of running dry• Flow rates to 650 USGPH (148 m3/hr)• Pressures to 450 psi (31 bar)• Viscosities to

20,000,000 ssu(4,400,000 cst)

ORBIS Technology enhanced drive solution with a brushless DC motor and integrated controls delivers precise flow in a compact footprint. The external gear design of D Series pumps provides a non-pulsing flow while the magnetically coupled construction provides a seal-less, leak-free pump. This combination provides long life, reliability and flexibility for various applications.

T Series• External gear design• Flow rates from 20 to 650 USGPH (19 to 2460 LPH)• Differential pressures to 250 psi (17 bar)• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

Magnetically Coupled Markets and Applications

Magnetically CoupledChemical and Corrosion Resistant

D Series with ORBIS™ Technology

D Series• External gear design• Flow rates from .015 to 121 USGPH (.06 to 458 LPH)• Differential pressures to 250 psi (17 bar)• Temperatures to 350°F (176°C)• Viscosity: 0.3 cps to over 10,000 cps• ATEX approved

• Flow Range up to 42 GPH (up to 160 LPH)• Differential Pressure to 80 PSI (5 bar)• System Pressure to 300 PSI (20 bar)• Viscosity 0.3 CPS to 2,000 CPS• Temperature - 125 °F Continues Duty• CE compliant

• Medical Equipment• Laser Cooling• Water Purification• Laboratory Equipment

• Chemical Metering• Liquid Chromatography• Industrial Inkjet Printers• Food Processing Equipment

• Polyurethane Foam Systems• Water Treatment• Chemical Systems

Tuthill’s magnetically coupled pumps are designed to provide exceptional reliability. Non-pulsing flow is combined with magnetically coupled, leak-free, seal-less technology resulting in longer life. These tough and durable external gear pumps are constructed with 316 Stainless Steel, Hastelloy, or Titanium.

4

OPERATING CONDITIONSSPEED10 – 1,750 rpm(Depending on the respective operating conditions)

PUMP PRINCIPLEExternal spur gears

ROTATIONClockwise (cw), rightCounterclockwise (ccw), left

VISCOSITY0.8 – 1,000,000 mPa·s(Depending on the respective operating conditions)

DISPLACEMENTS CC/REVSee chart on page 5.

TEMPERATURE-20°C up to +150°C (standard version)Special designs are available up to 350°C

PRESSUREOperating pressure max. 200 barVaries with size and material specification. See chart on page 5 for details.

MATERIALS316 stainless steel body with 440B wear parts, or cast iron body with hardened steel wear parts.

COMMON APPLICATIONSMetering of polyurethanes, isocyanate, polyol, catalyst, additives, silicones, adhesives, oils and diesel fuel

HIGHLIGHTS• Low-pulsation and precise dosing of the

medium being transferred• High pressures• Large flow range• Multiple construction material options• Multiple sealing options

Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. The basis of its success stems from a platform of customi- zation that rivals even the most competent competi-tors. Available in cast iron and stainless steel bodies, the ZPD flaunts 43 displacement sizes, 5 shaft seal options and multiple bearing and wear plate choices. ZPD gear pumps are specifically used for wide flow range metering applications and transfer applications. Volumetric efficiency values of over 90 % are typically achieved.

ZPDEXTERNAL GEAR DOSING PUMP

6

SPEED1 – 200 rpm(Depending on the respective operating conditions)

PUMP PRINCIPLELow pulsation external spur gears

ROTATIONClockwise (cw), right

VISCOSITY1 – 1,000,000 mPa·s(Depending on the respective operating conditions)

DISPLACEMENTS CC/REVZPDA 1: 0.1/ 0.3 / 0.6 /1.2 /1.8 / 2.4 / 3.0 / 4.8 / 6.0ZPDA 2: 6.0 /10.0 /12.0 /16.0 / 20.0 / 22.0 / 26.0

TEMPERATURE-20°C up to +150°C (standard version)Special designs are available for deviating temperatures.

PRESSUREOperating pressure max. 200 bar

MATERIALS440B stainless steel

COMMON APPLICATIONSDosing of polyurethanes, isocynate, polyol, catalyst, additives, silicones, fuels, adhesives, oils, hotmelts, paints and ink

HIGHLIGHTS• Low-pulsation and precise dosing of the medium

being transferred• High-precision “start–stop dosing”• Rapid pressure build-up• Option for direct mounting of VSE flow meter• Corrosion/wear resistant coatings

The high-precision ZPDA dosing pumps are specifical-ly designed for start stop dosing. The low pulsation gear design provides a constant flow with very rapid pressure build-up. Internal clearances based on fluid viscosities are held within a few microns to insure the highest efficiency possible, even at high differential pressures up to 200 bar. Depending on the applica-tion, DLC coatings are available for the wetted parts to provide additional corrosive resistance and abrasive particle resistance as well. Direct mounting of a VSE flow meter on the rear plate is also available for closed loop control.

ZPDAEXTERNAL GEAR DOSING PUMP

OPERATING CONDITIONS

8

OPERATING CONDITIONSSPEED10 – 400 rpm(Depending on the respective operating conditions)



VISCOSITY10 – 200,000 mPa·s(Depending on the respective operating conditions)

DISPLACEMENTS CC/REVECO.pump 0.15 / 0.3 / 0.6 / 1.2 / 1.8 / 2.4 / 3.0 / 4.8 / 6.0

TEMPERATURE-20°C up to +100°C (standard version)Special designs are available for deviating temperatures.

PRESSUREOperating pressure up to 40 barPressure max. 50 bar

MATERIALS440B stainless steel or aluminium housing

COMMON APPLICATIONSDosing of media without fillers:isocyanates, adhesives, silicones, polyols, hotmelts, paints and oils

HIGHLIGHTS• Low-pulsation dosing of the medium• Easy and fast assembly and disassembly• Economical• Light weight

New to the Beinlich lineup, the ECO.pump boasts as a highly capable external gear pump at an economical price point. Competent at metering viscous media up to 200,000 mPa·s, the ECO.pump lends itself to many common applications. The stainless steel body and compact design allow the pump to be used as an in-line device and maintain a rust free integrity. Available with a variety of displacement sizes, the ECO.pump is the cost effective solution for your metering pump needs.

EXTERNAL GEAR DOSING PUMP

10

OPERATING CONDITIONSSPEED1 – 400 rpm(Depending on the respective operating conditions)



VISCOSITY1 – 1,000,000 mPa·s(Depending on the respective operating conditions)

DISPLACEMENTS CC/REVDARTec®

0.1 / 0.3 / 0.6 / 1.2 / 1.8 / 2.4 / 3.0 / 4.8 / 6.0

TEMPERATURE- 20°C up to +150°CSpecial designs are available for deviating temperatures.

PRESSUREOperating pressure max. 150 bar

MATERIALSStainless steel or low weight design

COMMON APPLICATIONSUV-curable fluids, acrylics, organic peroxides, additives, thermally reactive fluids

HIGHLIGHTS• Low-pulsation and exact dosing of the medium being

transferred• High-precision „start-stop-dosing“• Low mass options• High inlet pressure• Highest efficiency of all Beinlich gear pumps

The DARTec® gear dosing pump was specifically desi-gned for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system elimi-nates material contact with bearings preventing shear and frictional heat in these areas normally associated with external gear pumps. Because of this innovation there is a notable reduction in the amount of solvent required to flush the pump and downtime between jobs. This also leads to overall improved efficiency, typi-cally > 95 %. The DARTec® is also available in a low weight construction (700 grams) and is optimal for use on 3 and 4 axis robot dispensing equipment.

EXTERNAL GEAR DOSING PUMP

■ Performance

Flow rate up to approx. 90,000 I/h

Operation pressure up to 15 bar

Suction head up to 9 mWC

■ Design

Easy stock-keeping and spares

inventory due to standardized sizes

Screw-type mounting foot for

horizontal and vertical installation

Flow direction: left - right, up - down

■ Temperature Resistance

Up to 95°C

· Optional up to 150°C

JM/JMU Series

sizes 2

max. rpm 800

[min-1]

max. pressure 5

[bar]

max. feeding capacity 8

[I/min]*

liter/rotation 0,01

size connections 25

[DN]

max. feeding capacity 480

[1/h]*

4

800

7

20

0,025

25

1.200

■ Product Viscosity

Up to 300,000 mPas

■ Colors

Munsell 7.5 GY 9/2

Further RAL-lacquer coatings

on request

■ Connections

( Suction and Pressure Side)

· Threaded connection (DN)

DIN 11851 (standard)

Aseptic flange DIN 11864-2

Aseptic threaded connection

DIN 11864-1

Tri-Clamp ISO 2852

SMS

Further connection types on request

10 16 25 40

800 600 450 450

15 15 15 15

40 60 100 135

0,05 0,1 0,22 0,3

40 40 40 50

2.400 3.600 6.000 8.100

* based on water without counter pressure, i.e. approx. 1 mPas/0 bar

Single Blade Rotor

Jacket

Pump Unit with

Motor and Base

Vertical Installation

Vented Cover

EHEDG Certification

55

■ Materials

Pump housing and cover:

stainless steel (1.4401/AISI 316)

Double blade rotors of patented alloy

■ Materials of Mechanical

Shaft Seals

Carbon/ceramics

Tungsten carbide

Silicon carbide

Further materials on request

■ Sealing Materials of O-rings

Viton

EPDM

Further materials on request

125 160 200 300

450 450 450 450 450

15 15 15

270 410 710

0,6 0,92 1,58

50 65 100

16.200 24.600 42.660

Rectangular Inlet

Nickel Coating

Numerous Other

Options

15 15

930 1.470

2,06 3,27

100 150

55.800 88.200

-Rotary Piston Pumps-

Dairy

Purees & Sauces

Confectionery

Beverages -

Bakery

Meat Products

Aseptic Production

Cosmetics

Chemicals

Pharmaceuticals

Others

Outstanding Quality & Performance

Made in Japan ��-

Rotary Piston Pumps Our record of high performance and quality speaks for itself.

Finding solutions for all your liquid distribution needs.

Technology & Confidence

since 1950

Nakakin began its operations in 1950 as a manufacturer

of wooden patterns and cast dies. To this day, we utilize

our technological expertise to manufacture products that

require the utmost precision such as automobile engine

parts. Nakakin has supplied engine parts such as mani

folds to major car companies such as Mitsubishi Motors,

Toyota, Suzuki, and so on.

Using this technology, we manufacture our pumps from

the raw material stage. This means that we have full con

trol over all stages of production right from the start. We

monitor both the production and assembly of our pumps,

ensuring the highest quality standards. We con-tinue to

stay ahead of our competitors through our original manu

facturing techniques and specially developed mate rials

such as Nakamura Metal No. 3.

We currently hold the top position in the Japanese market

and export a number of pumps to locations throughout

the world. Nakakin continues to advance with our vision to

always deliver ''Technology & Confidence".

�1 Nakamura Metal No. 3

Nakamura Metal No. 3 is a unique product that we developed

using our advanced molding technology. It is a special alloy

that has minimum expansion even under high temperatures.

Our pumps are constructed as "non-contact structure pumps".

There are no touching parts in the pump's wetted area.

The pumps

... provide an excellent capability to convey a constant volume

of liquid.

... are self-priming. They can be even used for vacuum pumping.

... allow for the distribution of liquids of all different levels

of viscosity .

. . . have a maximum discharge pressure of 15 bar.

Our Series

( JM/JO Series \ r JMU Series \

High degree of cleanability

Can be completely cleaned with a CIP (Cleaning In Place) system!

No need to do time-consuming COP (Cleaning Out Of Place).

The pump's wetted parts are easy to disassemble.

( SC Series ( AMXN Series \

Our standard with inside seal

(JM = mechanical seal, JO= O-ring seal). A

large number of variations available.

Our pump witl1 outside mechanical seal

represents an improvement in

anti-corrosion and anti-slurry properties.

This pump allows for easiest cleaning

without any liquid residues.

The double-layered structure with steam barriers

prevents contamination from external air.

A series that is compatible with aseptic lines.

pumps• Molasses • Soap • Additives • Polyol • Viscose • Sulphate soap • Maltose •...

Documents

Transcript of pumps• Molasses • Soap • Additives • Polyol • Viscose • Sulphate soap • Maltose •...