Pump Cats
description
Transcript of Pump Cats
SULZER
OHH
OHH & OHHL
OHHL
ZE/ZF
overhung, horizontal, centerline mounted, single stage, radially split process pump
Heavy duty process flows & heads
Oil & Gas
Hydrocarbon Processing
Power Generation
Pump size
25 to 400mm
25 to 50 mm
Flow
2250 m3/h
1 to 60 m3/h
Head
370 m
450 m
Pressure
75 bar
51 bar
Temperature
-75 to 425 degC
-75 to 425 degC
S-4, S-5, S-6, S-8, S-9, C-6, A-8, D-1, D-2, 317L
S-4, S-5, S-6, S-8, S-9, C-6, A-8, D-1, D-2
Pressure casing
Designed for 20% tensile strength with 3 mm CA. 300# flange standard (optional 600#)
Impeller
OHH- Enclosed Impeller
OHHL Semi open for low flow & high head capability
Shaft
Extra heavy duty , large diameter shaft
Bearing
Opposed 40 degrees angular contact thrust bearings with machined brass cage for long term reliability.
Bearing housing
Carbon steel construction with cooling fins for improved heat dissipation
Mech Seals
Fully cartridge API 682 seals in API 610 seal chamber
Bearing Housing
4 sizes of bearing housing cover (ring oil/purge mist or oure mist lubrication)