Creative and Print Services offer a complete exhibition and display graphics solution from pull-up exhibition banner stands to large format poster printing.

Whether you want a simple or bespoke design, our creative in-house design team are able to produce dynamic graphics to ensure that your display stands out from the crowd.

Pull-up BannersOur lightweight and portable pull-up banners are ideal for displays and exhibitions.

The stand comprises of a high quality graphic panel with lamination which winds into a durable aluminium base – all of which stores neatly into a carry case making it easy to transport.

Key features• Lightweight and portable• High quality graphics• Carry case• Laminated finish• 4 day production turnaround

(Design costs are additional)

For more information on our other design and print services, call into our reception in the Herbert Manzoni Building.

Pull-up Banners Exhibition and Display Graphics

T: 01509 222190 E: creativeandprint@lboro.ac.uk W: www.lboro.ac.uk/creativeandprint

ArtworkAll artwork should be created as CMYK and supplied as PDF.

Please email artwork to print@lboro.ac.uk

All artwork should ideally be supplied 100% but no smaller than 25% of the sizes in the diagram to the right.

EXAMPLE 100% 850mm x 2150mm 50% 425mm x 1075mm 25% 212.5mm x 537.5mm

Please supply finished artwork at a final output resolution of 150 dots per inch (dpi).

Artwork Size 100% In artwork images 150dpi (min) 50% In artwork images 300dpi (min) 25% In artwork images 450dpi (min) (images at a lower dpi than this will not reproduce well)

No crop marks required.

Logo approval/copyrightAny use of the University logo will need to be approved by sending a PDF on email to creativeandprint@lboro.ac.uk

Please make sure you have permission to use all logos and images on your artwork.

Design serviceCreative and Print Services offer a design service. If you are unsure of creating your own artwork, please contact creativeandprint@lboro.ac.uk

Terms and conditionsWe will ensure the highest quality product, however Creative and Print Services cannot be held responsible for artwork created incorrectly or the quality of any banner due to inclusion of substandard images.

Tota

l Hei

ght o

f Art

wor

k 21

50m

m

Area Hidden in BaseHeight = 150mm

Hei

ght o

f Vis

ible

Are

a 20

00m

m

Width 850mm

DO NOT PUT IMPORTANT INFORMATION IN THIS AREA

Pull-up Banners Artwork Instructions

T: 01509 222190 E: creativeandprint@lboro.ac.uk W: www.lboro.ac.uk/creativeandprint

How to assemble your banner

To dis-assemble your banner

1. Your equipment includes: base, bungee pole and carry bag

1. Lean banner back so you can comfortably unhook the top rail from the pole

4. Tilt banner backwards and extend the banner by pulling the top rail until graphic is fully visible

2. Lift the base and twist the two base feet 90 degrees

2. Be very careful when lowering the banner back down into the base unit (DO NOT LET GO)

5. Use one hand to grip the top rail and the other to hold the pole. Guide the pole into the slot in the rail

3. Assemble the bungee pole and insert into hole on base unit

3. Ensure the banner is central when it is lowered into the base unit cassette

6. Assembled banner viewed from front and rear

Pull-up Banner Assembly Instructions

6799

9/C

&P

/Jan

18T: 01509 222190 E: creativeandprint@lboro.ac.uk W: www.lboro.ac.uk/creativeandprint