PSI Punchline – Fall 2008
4
P O W E R S E R V I C E Serving the Industry Since 1954 Denver, CO Salt Lake City, UT Billings, MT Green River, WY Casper, WY Power Service, Inc. has made an effort this past year to broaden our overall manufacturing capabilities. This also includes better marketing of our near 30,000 sq. ft. of fabrication and shop facilities. One example of this growth is the production of approximately 20 - 30 LACT units per month. This is our newest line of turnkey packages that feature our Flowserve/Durco Mark III ANSI centrifugal pump and Flowserve SMP sample pump. The Lease Automatic Custody Transfer unit (LACT) is designed for the automatic transfer of ownership of crude or condensate between the buyer and seller. We are currently building an “Open Style” unit on an oil field type skid, along with a complete turnkey package to include a fiberglass or steel building. All are pre-wired with explosion-proof lights, heaters, junction boxes, and PLC’s. The package unit will be ready to be set at location for ease of customer hook-up and designed to handle the harsh Rocky Mountain winters. Power Service, Inc. has increased our inside sales staff support along with drafting and engineering support to provide a superior product and design. The goal of our staff is to provide 100% customer satisfaction with our vast pump knowledge and experience at Power Service, Inc. along with factory trained technicians to provide field service support. Make Power Service, Inc. your sole source for all your turnkey LACT packages, LACT pumps, and LACT metering needs. Please do not hesitate to contact us at toll free at (800)743-4774 or email Erik Alberts at [email protected]. Power Service, Inc. - LACT Units MANAGER’S LINE: IN THIS ISSUE: Fabrication Line ............ 2 Multiple Disposal Well Injection Facility Product Line.................. 3 Lease Automatic Custody Transfer Units Announcements..............4 Power Service, Inc. POWER SERVICE, INC. • FALL 2008 • VOL.7 ISSUE 3 LACT unit with enclosure - outside view LACT unit with enclosure -inside view
Transcript of PSI Punchline – Fall 2008
P O w E r S E r v i C EServingthe IndustrySince 1954
Denver, CO Salt Lake City, UT Billings, MT Green River, WY Casper, WY
Power Service, Inc. has made an effort this past year to broaden our overall manufacturing capabilities. This also includes better marketing of our near 30,000 sq. ft. of fabrication and shop facilities. One example of this growth is the production of approximately 20 - 30
LACT units per month. This is our newest line of turnkey packages that feature our Flowserve/Durco Mark III ANSI centrifugal pump and Flowserve SMP sample pump.
The Lease Automatic Custody Transfer unit (LACT) is designed for the automatic transfer of ownership of crude or condensate between the buyer and seller.
We are currently building an “Open Style” unit on an oil field type skid, along with a complete turnkey package to include a fiberglass or steel building. All are pre-wired with explosion-proof lights, heaters, junction boxes, and PLC’s. The package unit will be ready to be set at location for ease of customer hook-up and designed to handle the harsh Rocky Mountain winters.
Power Service, Inc. has increased our inside sales staff support along with drafting and engineering support to provide a superior product and design. The goal of our staff is to provide 100% customer satisfaction with our vast pump knowledge and experience at Power Service, Inc. along with factory trained technicians to provide field service support.
Make Power Service, Inc. your sole source for all your turnkey LACT packages, LACT pumps, and LACT metering needs. Please do not hesitate to contact us at toll free at (800)743-4774 or email Erik Alberts at [email protected].
Power Service, Inc. - LACT UnitsMANAGEr’S LiNE:iN ThiS iSSUE:Fabrication Line ............2Multiple Disposal Well Injection Facility
Product Line ..................3Lease Automatic Custody Transfer Units
Announcements..............4Power Service, Inc.
POWERSERVICE,INC. • FALL2008 • VOL.7ISSUE3
LACT unit with enclosure - outside view LACT unit with enclosure -inside view
FABriCATiON LiNE: Multiple Disposal Well Injection Facility
POWER SERVICE INC l PUMPS l AIR COMPRESSORS l BLOWERS l DRYERS l FILTERS l ENGINEERING l FABRICATING l FIELD SERVICE l START-UP ASSISTANCE l POWER SERVICE INC
A Wyoming Independent Oil & Gas Producer recently partnered with Power Service, Inc. to fabricate their water disposal facility near the Atlantic Rim Area of South Central Wyoming. A portable water disposal facility was created from initial design to fabrica-tion and finally shipment to site by Power Service, Inc.’s Design & Engineering team. Past experience allows us to accurately and efficiently propose and construct water disposal facilities.
The system consisted of a 16’ x 60’ injection pump facility and a 16’ x 55’ charge pump/filter & electrical facility. Each building weighed in excess of 100,000 lbs. The charge pump area con-sisted of (2) Durco ANSI charge pumps, (2) Durco ANSI transfer pumps, (2) FSI Filter Vessels, catwalks, and all interconnecting pipe. The Electrical room consisted of (2) 600 HP VFD’s with Mirus harmonic filters, Allen Bradley Touch Screen PLC, charge pump and booster pump starters, and all necessary transform-ers/breakers and other miscellaneous electrical equipment.
The Injection facility consisted of (2) 600 HP Schlumberger REDA Horizontal Centrifugal Pumps that could flow at ranges of 6,000 BPD to 24,000 BPD at pressures of 350 psig up to 1600 psig. These pumps discharge to an engineered and fully automat-ed manifold system that included Taylor MDI chokes, Vavlcon Actuators, Rosemount Transmitters, and EDD flow meters. This system was designed to allow water dis-posal to up to 6 wells at varying pressure and flow rates while maintaining a constant flow and pressure rate out of the Schlum-berger REDA pumps. The facility also included a 6,000 lb bridge crane that ran the entire length of the building.
For more information on skidded or site-built water disposal plants, please contact your local Power Service, Inc. branch or Tony Cercy toll free at (800)743-4774 ext. 228 or email him at [email protected].
POWER SERVICE INC l PUMPS l AIR COMPRESSORS l BLOWERS l DRYERS l FILTERS l ENGINEERING l FABRICATING l FIELD SERVICE l START-UP ASSISTANCE l POWER SERVICE INC
PrODUCT LiNE
Lease Automatic Custody Transfer Units( L A C T )
One of the newest lines of fabrication to Power Ser-vice Inc. is the Lease Automatic Custody Transfer unit or LACT unit.
The LACT unit was designed for the automatic transfer of ownership of crude or condensate between the buyer and seller.
This transfer can be on land or offshore, into pipelines, barges, and tanker loading and off-loading operations.
On land, LACT units are usually small, single run sys-tems with portable proving connections designed for loading into trucks.
Power Service, Inc. understands that offshore space is a premium. Thus, units can be built in any number of configurations and footprints, but also consider the serviceability of the unit.
Many factors go into the design of LACT units flow rates, space limitations, temperature, viscosity, corro-sion, and customer specifications. As long as these are taken into consideration, one can end up with a quality measurement system.
*PowerServiceInc.iscapableofbuilding20–30LACTunitspermonth.
POWER SERVICE INC l PUMPS l AIR COMPRESSORS l BLOWERS l DRYERS l FILTERS l ENGINEERING l FABRICATING l FIELD SERVICE l START-UP ASSISTANCE l POWER SERVICE INC
POWER SERVICE INC l PUMPS l AIR COMPRESSORS l BLOWERS l DRYERS l FILTERS l ENGINEERING l FABRICATING l FIELD SERVICE l START-UP ASSISTANCE l POWER SERVICE INC
Power Service, Inc.5625 Chapman PlaceP.O. Box 2870Casper, WY 82602(307) 472-7722 • (800) 743-4774FAX: (307) [email protected]
Power Service, Inc.595 Uinta DriveGreen River, WY 82935(307) 875-5200 • (877) 562-7867FAX: (307) [email protected]
Power Service of Utah, Inc.3284 W 2100 S Unit BSalt Lake City, UT 84119(801) 433-3331 • (800) 276-7175FAX: (801) [email protected]
Power Service of Colorado, Inc.4570 Ivy Street, Unit B-300Denver, CO 80216(303) 394-4440 • (888) 292-2298FAX: (303) [email protected]
Power Service of Montana, Inc.4025 1st Avenue SouthBillings, MT 59101(406) 252-8114 • (800) 823-8665FAX: (406) [email protected]
Please Note: Not all product linesavailable in all areas.
Distributors For:
PRSRT STDU.S. POSTAGE
PAIDJETMAIL
33765
Power Service of Utah has a new location. The new facility is located at: 3284 W. 2100 S., Suite B in Salt Lake City. It is a great location that provides ad-ditional space for continued growth.
We have a few new people working with Power Service, Inc. In our new Utah location, we’d like to welcome Mike Ohlin as our area representative. Rachel Eldard is our new office secretary and Mary Robinson is our new air compressor sales associate.
In our Montana store we’d like to welcome Mark Solie as our new area representative and Mark Frenk as our new service coordinator. David Ostermiller is also welcomed as our new parts specialist.
In our Colorado store we’d like to welcome ReAnn Ross and Adam Lijewski as our new area representatives, Todd Knurr as an addition to our shipping & receiving department, and Eric Rice as our new air compressor salesman.
The Green River store welcomes Keith Olson, a new area representative.
In our Casper, WY store we welcome Georgia Hagar, Candi Long, and Colleen Hoffman as part of our office staff. Kevin Carl, Travis Chapman, Mike Pociask, Clayton Cribbs, and John Greenleaf are all new service techs. Finally, we’d would like to extend a warm welcome to Cody Pennington as part of our inside sales team.
This past summer and fall, quite a few of our employees attended training classes to further their knowledge and educate them on the products and services provided by our vendors. To name a few; Matt Wambold, Adam Murray, Melissa Parker and Brad Amundsen all attended FLOWSERVE Pump School training in Chesapeake, VA. Ed Brunner and Nathan Johansen completed FLOWSERVE parts training in Moosic, PA. We also sent quite a few of our service techs to Atlas Copco and FLOWSERVE training as well.
As we look toward the upcoming New Year, we foresee another busy year for all of us here at Power Service. The energy business in the Rocky Mountain Region seems to keep growing with leaps and bounds. The economy in the USA is still a concern for all kinds of business as we face new hurdles and developments. We hope everyone has a great 2009 and we look forward to serving you!
Power Service, Inc.ANNOUNCEMENTS:
POWER SERVICE, INC.P.O. Box 2870Casper, Wyoming 82602
