Prusa Mini PSU holder...Prusa Mini PSU holder VIEW IN BROWSER updated 16. 8. 2020 | published 16. 8....
Transcript of Prusa Mini PSU holder...Prusa Mini PSU holder VIEW IN BROWSER updated 16. 8. 2020 | published 16. 8....
![Page 1: Prusa Mini PSU holder...Prusa Mini PSU holder VIEW IN BROWSER updated 16. 8. 2020 | published 16. 8. 2020 3.0 MB 2.62 hrs f 0.20 mm k 0.40 mm h PET 26.90 g d Prusa MINI updated 16.](https://reader035.fdocuments.us/reader035/viewer/2022081619/60fc4050fd5bb66739658a18/html5/thumbnails/1.jpg)
2.62 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
8
27.00 g
d
Prusa MINI
Print Files (.gcode) DOWNLOAD ALL FILES
Summary
The Prusa Mini fits snugly into an IKEA Metod kitchen cabinet (60cm deep,40cm wide, uses approx. 40cm vertical space).
I needed something to neatly mount the power supply, so I designed thissimple Power Supply holder for the Prusa Mini.
This allows you to vertically mount the PSU. There is a large opening at thebottom for the power-cord to pass though.
I mounted it in an IKEA Metod kitchen cabinet using standard fixing screws(see photos). Using a depth stop set to 15mm, mark and drill both 5mmholes.
3D Printers > Other Accessories
I printed this in Prusament PETG, 0.20mm quality. Enabled all supports forthe mounting holes.
E Ed
Prusa Mini PSUholder
VIEW IN BROWSER
updated 16. 8. 2020 | published 16. 8. 2020
![Page 2: Prusa Mini PSU holder...Prusa Mini PSU holder VIEW IN BROWSER updated 16. 8. 2020 | published 16. 8. 2020 3.0 MB 2.62 hrs f 0.20 mm k 0.40 mm h PET 26.90 g d Prusa MINI updated 16.](https://reader035.fdocuments.us/reader035/viewer/2022081619/60fc4050fd5bb66739658a18/html5/thumbnails/2.jpg)
3.0 MB
2.62 hrs f 0.20 mm k 0.40 mm h PET 26.90 g d PrusaMINI
updated 16. 8. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
39.3 KBupdated 16. 8. 2020
128.3 KBupdated 16. 8. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
prusa-mini-psu-holder-for-ikea-v7_02mm_petg_min.gcode
prusa-mini-psu-holder-for-ikea-v7.stl
prusa-mini-psu-holder-for-ikea-v7.f3d