prtfct 01 1 - gpa.ugatu.sugpa.ugatu.su/www/catalogs/doc/filtrs/ARLON/AP_InAgb_F.pdf · Hydraulic...

IN-AGB SeriesHydraulic Filter Inserts

Global Filtration Technology7

Hydraulic Filter InsertsIN-AGB Series

Parker Hannifin CorporationHydraulic Filter DivisionMetamora, OH

Features/Applications for IN-AGB Series

■ Flows to 640 GPM

■ 3 Microns to 120 Micron Absolute

Model IN-AGB

Hydraulic Filter Inserts

IN-AGB Filter Insert allows individual or custom design of your reservoirwith an in-tank filtering system. The IN-AGB Insert can be used as either asuction or return line filter. Filtration begins with magnetic prefiltrationwhich collects ferromagnetic particles from fluid upstream of the filterelement. This feature alone could save hundreds of dollars a year inhydraulic component costs by assuring that the fluid is as clean as possiblewhen it leaves the filter. Even during bypass, contaminants are collected bythe magnetic core, an important feature in any fluid power system.

Take a close look and compare Arlon features with any other filter.

1. Immediately upon entering the filter, the fluid velocity is considerablydecreased, significantly aiding in efficient filtration. Inlet flow does notimpinge on the element.

2. Filtration begins with magnetic prefiltration of ferromagnetic particles inthe full fluid flow upstream of the element, not downstream of in thereservoir. Built-in or system generated ferrous wear-- – debris (evenparticles smaller that the element rating) are collected by the highstrength (3.0K Gauss) magnetic column. This results in extendedelement and oil life and reduced maintenance and downtime, whichreduces overall operating costs.

3. Fluid passes through the element in an inside-to-outside direction,collecting particles inside the filter cartridge. This prevents collectedcontaminants from falling back into the system when changing elements.

Competitive filters allow contaminated fluid to drain back into thesystem when the element is serviced.

4. Simplified bypass design and location prevents flushing previouslycollected contaminants back into the system. Since the element servesas the valve there is no troublesome separate valve to remove whenchanging elements. All Potential leakage paths are o-ring sealed toeliminate bypass leakage that can occur in loose fitting valve assemblies.

IN-AGB Filters are available with disposable or cleanable elements ofseveral contamination class levels for use in all common fluids.

Heart Of The FilterAll of these filter models use the IN-AGB insert, whetherin-tank, return line, low pressure in-line or duplex, theIN-AGB Filter Insert is the interchangeable heart ofthese filters. Used by itself, the IN-AGB allows you todesign your own in-tank filter.

(A) GA-90

(B) BGAH-500 with Indicator

(C) IN-AGB-500

(D) BGTS-500

(E) TTF-230 with Gage

(F) BDK-120 Duplex Filter

(G) RDF-120 & RDF-230

1

3

2

4

■ Disposable or Recleanable Elements

■ Optional LEIF® element

8

A

BC

D

EF

G



Betamaze Media High Performance Betamaze...High Performance

With Long Life

After years of research Arlon offers its

best filter media ever, BetaMaze. The

media is a special blend of inorganic

microfibers formulated for unmatched

dirt holding capacity and state of the art

filtration efficiency. The filter element is

multilayer construction and wire mesh

reinforced. BetaMaze provides excellent

fatigue resistance and top performance

with pulsing (surge) flows.

The Betamaze Edge...Long Life

Because of their exceptional dirt holding

capacity BetaMaze elements need to be

changed less frequently than comparable

sized competitive elements. A real cost

savings that pays dividends every

minute of operation.

Beta Ratings

Beta ratings are the recognized industry

standard for measuring filter efficiency.

They offer the user an accurate method

of comparing different filters’ efficiency.

Beta ratings are obtained from strictly

controlled laboratory tests. The higher the

Beta ratio the greater the filter’s capacity

to capture particles larger than the

indicated Beta size. A Beta rating of

Bx≥100 has a corresponding efficiency

of 99.0%.

Element Beta ratio βxElement efficiency in percent

MICRON Multipass Test Results To ISO 4572

MediaRating (Time Weighted Averages)

Type β×>β×>β×>β×>β×>100 βββββ3 βββββ6 βββββ10 βββββ12 βββββ20 βββββ25 βββββ36

GDL 3 ≥ 100 800 2000 >500099.0 99.87 99.95 99.98 INF. INF. INF.

GDL 6 8 ≥100 1000 2000 >500087.5 99.0 99.9 99.95 99.98 INF. INF.

GDL 10 6 22 ≥ 100 ≥ 200 >500083.3 95.4 99.0 99.5 99.98 INF. INF.

GDL 20 2 8 20 ≥ 100 ≥ 200 >5000N/A 50.0 87.5 95.0 99.0 99.5 99.98

TXX 36 2 3.5 6 23 ≥ 100N/A N/A 50.0 71.4 83.3 95.6 99.0

MB 25 1.5 2.5 6 28 ≥ 100 > 2000N/A 33.3 60.0 83.3 96.4 99.0 99.95

ST See Table 1 – How to Order

How It’s Applied

Insert

The Arlon IN-AGB Filter Insert is

an all-in-one self contained filter

that allows you to design your own

in-tank filter. Ideal for either

suction or return line filtering.

The IN-AGB Insert can save space,

reduce plumbing and reduce

pressure drops.

In-Tank

The Arlon In-Tank Filter is a

return line filter which utilizes the

IN-AGB Insert. It is ideal for low

contour vehicles, mobile equipment

with reservoirs integral to the

vehicle frame and compact station-

ary power units. The reservoir can

be filled through the filter.

In-Line Filters

The Arlon In-Line Filters are

designed for applications in

suction, pressure and return lines

and use the IN-AGB Insert. Models

available with pressures up to 750

psi and flows up to 200 gpm.

9



How to Size IN-AGB Insert Filters

Element Pressure Drop Factor:

Multiply the actual flow rate times the applicable ∆P factor todetermine the pressure drop with a fluid viscosity of 140 SSU.Correct for other viscosities by applying the followingformula: Flow rate (GPM) x filter factor x (new viscosity inSSU/140 SSU).

Low Pressure Clean Element Presure Drop Factors*

MediaCode 30 60 90 120 170 230 300 390/400 500 600 800 1000 1500 2000

GDL3 1.863 .905 .603 .452 .286 .205 .157 .122 .097 .082 .061 .0493 .0328 .0246

GDL6 .708 .345 .236 .168 .103 .079 .057 .045 .037 .031 .023 .0187 .0121 .0091

GDL10 .546 .280 .187 .127 .074 .052 .044 .032 .024 .022 .016 .0129 .0088 .0066

MB/ST10 .489 .238 .166 .123 .088 .065 .049 .037 .029 .025 .018 .0152 .0098 .0073

GDL20 .434 .214 .137 .107 .049 .038 .031 .022 .017 .014 .0104 .0088 .0058 .0044

ST25 .163 .079 .055 .041 .030 .021 .016 .012 .010 .008 .0061 .0050 .0032 .0025

TXX .077 .040 .029 .021 .018 .013 .010 .007 .006 .005 .0036 .0030 .0019 .0015

ST40 .075 .036 .025 .018 .014 .010 .007 .006 .0044 .004 .0027 .0023 .0015 .0011

*Based on 0.88 specific gravity fluids

Example: Element Size Code = 230Element Media Code = GDL10Filter Factor = .052 (From chart)Flow = 60 GPMViscosity = 160 SSU

Formula: 60 GPM x .052 x (160 SSU/140 SSU) = 3.6 PSID

10



Mounting Methods

11



Dimensions

IN-AGB-30, 60, 90, 120

Dimensions

IN-AGB-170, 230, 300

Insert Filter — Series 1

Dimensions IN-AGB Filter Model

inches (mm) 30 60 90 120

A 3.35 (85) 5.35 (136) 7.09 (180) 9.05 (230)

Weight 1.1 (.5) 1.3 (.6) 1.8 (.8) 2.0 (.9)lbs (kg)

12

Dimensions IN-AGB Filter Modelinches (mm) 170 230 300

A 9.29 (236) 12.05 (306) 20.12 (511)

Weight 4.6 (2.1) 4.9 (2.2) 6.0 (2.0)lbs (kg)




Dimensions

IN-AGB-390, 500

Dimensions

IN-AGB-600, 800, 1000, 1500, 2000

Dimensions IN-AGB Filter Modelinches (mm) 390 500

A 13.31 (338) 20.79 (528)

B 14.37 (365) 21.85 (555)

Weight 6.6 (3.0) + 8.0 (3.6) +

lbs (kg) 10.1 (4.6) * 13.0 (5.9)*

Dimensions IN-AGB Filter Model

inches (mm) 600 800 1000 1500 2000

A 15.94 (405) 20.28 (515) 24.41 (620) 35.43 (900) 45.87 (1165)

B 17.52 (445) 21.85 (555) 25.98 (660) 37.00 (940) 47.44 (1205)

Weight 29 (13.2) + 30 (13.6) + 37 (16.8) + 47 (21.4) + 51 (23.2) +

lbs (kg) 35 (15.9)* 37 (16.8)* 45 (20.5)* 56 (25.5)* 63 (28.6)*


*Weight With Diffusor Option+Weight Without Diffusor


*Weight With Diffusor Option+Weight Without Diffusor

13



1 2 3

Top Spring Insert Assembly Diffusor

Size Bridge - Aluminum, ShaftCode Steel Steel, Magnets - Ceramic Steel

30 48371201 11010000 Not Available

60 48371201 11020000 Not Available

90 48371201 11030000 Not Available

120 48371201 11040000 Not Available

170 48371202 12050000 Not Available

230 48371202 12060000 Not Available

300 48371202 12070000 Not Available

390 48371203 13080000 2109036

500 48371203 13090000 2109037

600 48371204 14100000 2109004

800 48371204 14110000 2109045

1000 48371204 14120000 2109006

1500 48371204 14130000 2109007

2000 48371204 14140000 2109008

Seals

Part Numbers Description

30, 60, 170, 230 390 or 500 600, 800, 1000,90 or 120 or 300 1500 or 2000

SOR-64 SOR-71 R-208 SOR-90 Insert O-Ring

81.14.150.31-Buna 81.14.150.32-Buna 81.14.150.33-Buna SOR-85 New Bypass81.14.152.31-Viton 81.14.152.32-Viton 81.14.152.33-Viton (Gasket) Seal

N75687-Buna / V75687-FKM SOR-113 SOR-113 SOR-115 Element O-Ring

– 180 x 164 x 5.5 R-8925 Diffusor Seal

Nitrile or Fluorocarbon (FKM)

*Please specify seal material suffix when ordering Fluorocarbon seals: “-V”

Bypass Assembly – 4

30, 60, 170, 230 390 or 500 600, 800, 1000, Pressure90 or 120 or 300 1500 or 2000

6903181 6903182 6903183 6903184 Blocked

4903017 4903018 4903019 4903020 4.5 PSID

4903001 4903002 4903003 4903004 12 PSID

4903005 4903006 4903007 4903008 22 PSID

1

2

4

3

Element (See HowTo Order Page)

14



LEIF® Betamaze™ Replacement Elements

Leif® Disposable Betamaze™ Element Assemblies

Size 3 MICRON 6 MICRON 10 MICRON 20 MICRONCode Absolute Absolute Absolute Absolute

BETA3 > 100 BETA6 > 100 BETA10 > 100 BETA20 > 100

30 TXL-GDL3 TXL-GDL6 TXL-GDL10 TXL-GDL2060 TXL2-GDL3 TXL2-GDL6 TXL2-GDL10 TXL2-GDL2090 TXL3-GDL3 TXL3-GDL6 TXL3-GDL10 TXL3-GDL20120 TXL3D-GDL3 TXL3D-GDL6 TXL3D-GDL10 TXL3D-GDL20170 TXL4-GDL3 TXL4-GDL6 TXL4-GDL10 TXL4-GDL20230 TXL5-GDL3 TXL5-GDL6 TXL5-GDL10 TXL5-GDL20300 TXL5A-GDL3 TXL5A-GDL6 TXL5A-GDL10 TXL5A-GDL20390 TXL8A-GDL3 TXL8A-GDL6 TXL8A-GDL10 TXL8A-GDL20500 TXL8C-GDL3 TXL8C-GDL6 TXL8C-GDL10 TXL8C-GDL20600 TXL10-GDL3 TXL10-GDL6 TXL10-GDL10 TXL10-GDL20800 TXL11-GDL3 TXL11-GDL6 TXL11-GDL10 TXL11-GDL20

1000 TXL12-GDL3 TXL12-GDL6 TXL12-GDL10 TXL12-GDL201500 TXL13-GDL3 TXL13-GDL6 TXL13-GDL10 TXL13-GDL20

LEIF® Disposable Betamaze™ Elements

Size 3 MICRON 6 MICRON 10 MICRON 20 MICRONCode Absolute Absolute Absolute Absolute

BETA3 > 100 BETA6 > 100 BETA10 > 100 BETA20 > 100

30 TXWL-GDL3 TXWL-GDL6 TXWL-GDL10 TXWL-GDL20260 TXWL2-GDL3 TXWL2-GDL6 TXWL2-GDL10 TXWL2-GDL2090 TXWL3-GDL3 TXWL3-GDL6 TXWL3-GDL10 TXWL3-GDL20120 TXWL3D-GDL3 TXWL3D-GDL6 TXWL3D-GDL10 TXWL3D-GDL20170 TXWL4-GDL3 TXWL4-GDL6 TXWL4-GDL10 TXWL4-GDL20230 TXWL5-GDL3 TXWL5-GDL6 TXWL5-GDL10 TXWL5-GDL20300 TXWL5A-GDL3 TXWL5A-GDL6 TXWL5A-GDL10 TXWL5A-GDL20390 TXWL8A-GDL3 TXWL8A-GDL6 TXWL8A-GDL10 TXWL8A-GDL20500 TXWL8C-GDL3 TXWL8C-GDL6 TXWL8C-GDL10 TXWL8C-GDL20600 TXWL10-GDL3 TXWL10-GDL6 TXWL10-GDL10 TXWL10-GDL20800 TXWL11-GDL3 TXWL11-GDL6 TXWL11-GDL10 TXWL11-GDL20

1000 TXWL12-GDL3 TXWL12-GDL6 TXWL12-GDL10 TXWL12-GDL201500 TXWL13-GDL3 TXWL13-GDL6 TXWL13-GDL10 TXWL13-GDL20

Outer SleeveSIZE CODE 30 60 90 120 170 230 300 390 500 600 800 1000 1500

PART No. TXSL TXSL2 TXSL3 TXSL3D TXSL4 TXSL5 TXSL5A TXSL8A TXSL8C TXSL10 TXSL11 TXSL12 TXSL13

15



HOW TO ORDER:Select the desired symbol (in the correct position) to construct a model code.Assembly Example:

BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6

IN-AGB 500 TXX8C-10 B T 22

BOX 2 & 3: SIZE AND ELEMENT CODES†

ReplacementElement Example:

BOX 3 BOX 4

TXX8C-10 B

DISPOSABLE RECLEANABLE

MB SERIES TXX SERIES BETAMAZE ELEMENTS ST SERIES*

HIGHFlow (GPM) EFFICIENCY 10 MICRON 3 MICRON 6 MICRON 10 MICRON 20 MICRON

10 MICRON NOMINAL ABSOLUTE ABSOLUTE ABSOLUTE ABSOLUTE STAINLESSSYMBOL FULL SURGE BETA10

>2.5 BETA10>2 BETA3

>100 BETA6>100 BETA10

>100 BETA20>100 STEEL MESH

30 8 20 N/A TXX-10 TXW-GDL3 TXW-GDL6 TXW-GDL10 TXW-GDL20 ST-

60 16 30 N/A TXX2-10 TXW2-GDL3 TXW2-GDL6 TXW2-GDL10 TXW2-GDL20 ST2-


120 32 50 N/A TXX3D-10 TXW3D-GDL3 TXW3D-GDL6 TXW3D-GDL10 TXW3D-GDL20 ST3D- 10,

170 50 80 MB4 TXX4-10 TXW4-GDL3 TXW4-GDL6 TXW4-GDL10 TXW4-GDL20 ST4- 25,

230 60 100 MB5 TXX5-10 TXW5-GDL3 TXW5-GDL6 TXW5-GDL10 TXW5-GDL20 ST5- 40,

300 80 120 MB5A TXX5A-10 TXW5A-GDL3 TXW5A-GDL6 TXW5A-GDL10 TXW5A-GDL20 ST5A- 60,

390 105 150 MB8A TXX8A-10 TXW8A-GDL3 TXW8A-GDL6 TXW8A-GDL10 TXW8A-GDL20 ST8A- 100,

500 135 200 MB8C TXX8C-10 TXW8C-GDL3 TXW8C-GDL6 TXW8C-GDL10 TXW8C-GDL20 ST8C- 120

600 160 220 N/A TXX10-10 TXW10-GDL3 TXW10-GDL6 TXW10-GDL10 TXW10-GDL20 ST10- (Microns

800 215 275 N/A TXX11-10 TXW11-GDL3 TXW11-GDL6 TXW11-GDL10 TXW11-GDL20 ST11- Absolute)




BOX 4: SEALSSymbol Description

B Nitrile (Buna)V Fluorocarbon (Viton)

BOX 5: DIFFUSORSymbol Description

T Only Available onModels 390 or Larger

OMIT If not required

BOX 6: BYPASSSymbol Description

B Blocked05 4.5 PSID*12 12 PSID**22 22 PSID†

*For Suction Applications**12 PSID Standard for ST Elements†22 PSID Standard for Disposible Elements

*ST Element Example: ST5-10, 10 Microns Absolute † - For LEIF® elements, replace “TXW” with “TXWL’. Example: TXW4-GDL10 becomes TXWL4-GDL10

16

Please note the bolded options reflectstandard options with a reducedlead- time. Consult factory on allother lead-time options.

prtfct 01 1 - gpa.ugatu.sugpa.ugatu.su/www/catalogs/doc/filtrs/ARLON/AP_InAgb_F.pdf · Hydraulic...

Documents

Transcript of prtfct 01 1 - gpa.ugatu.sugpa.ugatu.su/www/catalogs/doc/filtrs/ARLON/AP_InAgb_F.pdf · Hydraulic...