LIFT TABLES

Proudly Madein Australia

ABN 72 006 349 220

Safetech Pty Ltd P.O. Box 360, Moe, Victoria 3825, Australia

Telephone: 1800 674 566Facsimile: (03) 5127 4431www.safetech.com.au Email: safetech@safetech.com.au

SmartLift Option

DIAGNOSTIC FUNCTION Diagnostics are insurance in the event of a breakdown. LED indicator lights help to pinpoint faults. A fast diagnosis gets your SmartLift up and running again sooner.

INDEXING FUNCTIONDuring pallet loading, the lift table usually needs to drop the same amount of time when another load of goods is added.

Pre-set this time with SmartLift then just “dab” the down button when ready for a new layer.

This means extra productivity. SmartLift can be switched from indexing to manual modes in seconds without special controls or an electrician.

SAFETY RECOILIf the safety bar senses something as the table lowers, it will instantly move up and away for a short distance. The ultimate in safety.

CYCLE COUNTERSmartLift has a cycle counter so that customers know when servicing is due. Regular maintenance avoids breakdowns and encourages longer life.

SAFETY BAR ALARMThe standard Safetech safety bar stops the lift table going down as soon as it comes into contact with a person or obstruction.

The SmartLift alarm provides an added level of safety, alerting others nearby that the lift table has sensed something or someone.

INTELLIGENT LIFTING For maximum safety and performance, upgrade your Safetech hydraulic lift table with SmartLift.

Options

TURNTABLESA wide range of manual or powered options, including:

3. FLUSH MOUNT PALDISC (pictured), set into the platform for the ultimate in hand pallet truck access.

4. POWERED TURNTABLE for palletising applications. Can be matched with wrapper mast for stack and wrap.

IP56 ELECTRICAL INSTALLATIONElectrics to IP56 degree of protection

(to AS1939) for outdoor or washdown applications.

SPECIAL PAINT

yellow safety bar. Special colours or paint formulations can be provided.

SKIRTConcertina skirt made from

reinforced vinyl with stiffening rods to prevent ingress into mechanism.

EXTERNAL POWER UNITSHydraulic power unit can be external

to the lift table, connected via a hydraulic hose.

SINGLE PHASE/THREE PHASELift tables may be supplied in either

single or three phase.

CHEQUERPLATE PLATFORMCheqeurplate platform for

pedestrian non-skid surface.

PLATFORM SIZEStandard platforms available ex stock. Non-standard platforms

dimensions.

HINGED FLAPS

platform to span the gap between the platform and the pit edge for

FORKLIFT SOCKETS AT THE SIDESForklift sockets can be welded to the

sides of the base frame of the lift table for easier relocation (lowered

height not increased).

ACCESS HATCH Access hatch in the platform allows for maintenance access to power

unit when the lift table is fully lowered.

GALVANISED PLATFORMEntire platform can be hot dipped galvanised for enhanced durability

and corrosion resistance.

LIFTING LUGSScrew in lifting lugs for easier

installation, especially for installing into a pit. The lifting lugs can

be removed after the lift table is installed.

FORKLIFT SOCKETS UNDERNEATHForklift sockets can be incorporated

into the base frame for easy relocation of the lift table (lowered

height increased).

PERSONNEL LIFTINGIncludes handrails, gates, safety

interlocking and on-board controls.

TANDEM TABLES

longer loads and higher capacity.

PROUDLY DISTRIBUTED BY:

Matpack Limited59A Mahunga Drive, Mangere Bridge 2022Auckland, New Zealand

P + 64 9 413 6405 M + 64 21 704 808 W matpack.co.nz

SAFETY BAR This highly effective safety device halts the downward motion if an obstruction is met during ascent.

HOLD DOWN LUGSHold down lugs enable lift table to be securely fi xed to the fl oor.

VENT LINEA clear vent line from the cylinder rod seal to the tank provides a visual indication of any oil bypass within the cylinder and prevents oil spillage.

FLOW CONTROL VALVEProvides incremental control of descent speed. Eliminates the possibility of the platform plummeting in the unlikely event of a hose failure.

LIMIT SWITCHUpper travel limit switch stops motor when lift table is fully extended. Can be adjusted to limit travel to any height.

MAINTENANCE CHOCKSLock lift table in fully raised position for safe maintenance access.

INTERNAL POWER UNITSMotor, pump and oil reservoir are completely contained within the lift table.

ROLLER RETAINERSRoller axles are captive within the base frame and platform to eliminate the possibility of upending the platform.

Specifi cationsStandard Features Specifi cations

OVERSIZED, LOW PRESSURE HYDRAULIC CYLINDERSLow operating pressure extends the life of the cylinder and other components. The cylinder rods are hard chromed to reduce wear and corrosion.

MINIMUM PLATFORM SIZES

MODEL Cap. VerticalTravel

A

HeightMin Max

BaseWidth

D

BaseLength

E

Power Unit Elev. timewith

std PU

Weightc/w Std

Plt

Std Platform Safety bar only

Skirt only SB & Skirt No SB or skirt Max Platform

B C L W L W L W L W L W L Wt mm mm mm mm kW Supply sec. kg mm mm mm mm mm mm

AS025-500 0.25 485 165 650 400 925 ? 240/1/50 20 42

950 450 950 450 1050 610

AS05-760 0.5 765 150 915 410 610 0.75 240/1/50 10 100 700 500 610 410 800 600 900 700 900

AS1-900 1 915 175 1090 610 1220 0.75 240/1/50 21 320

AS2-900 2 915 175 1090 610 1220 0.75 240/1/50 42 335 1300 1150 1300 800 1400 800 1500 1000 1220 615 1800 1200

AS3-900 3 915 200 1115 610 1220 2.4 415/3/50 22 390

AS1-900W 1 915 175 1090 1000 1220 0.75 240/1/50 21 340

AS2-900W 2 915 175 1090 1000 1220 0.75 240/1/50 42 355 1300 1200 1300 1200 1400 1200 1500 1400 1220 1000 1800 1600

AS3-900W 3 915 200 1115 1000 1220 2.4 415/3/50 22 410

AS1-1200 1 1220 200 1420 610 1680 0.75 240/1/50 27 500

AS2-1200 2 1220 200 1420 610 1680 2.4 415/3/50 18 530 1800 1150 1800 800 1900 800 2000 1000 1680 610 2400 1200

AS3-1200 3 1220 200 1420 610 1680 2.4 415/3/50 27 545

AS1-1200W 1 1220 200 1420 1000 1680 0.75 240/1/50 27 520

AS2-1200W 2 1220 200 1420 1000 1680 2.4 415/3/50 18 550 1800 1200 1800 1200 1900 1200 2000 1400 1680 1000 2400 1600

AS3-1200W 3 1220 200 1420 1000 1680 2.4 415/3/50 27 565

AS4-1250 4 1250 310 1560 1000 1950 2.4 415/3/50 45 6102050 1300 2050 1300 2180 1410 2280 1500 1970 1300 2900 1800

AS6-1250 6 1250 320 1570 1000 1950 2.4 415/3/50 45 610

AS4-1250W 4 1250 310 1560 1400 1950 2.4 415/3/50 45 6102050 1700 2050 1700 2180 1810 2280 1900 1970 1700 2900 2200

AS6-1250W 6 1250 320 1570 1400 1950 2.4 415/3/50 45 610

AS4-1500 4 1500 440 1940 2000 2900 5.5 415/3/50 30 20003000 2400 2980 2400 3150 2480 2910 2350 3600 3000

AS6-1500 6 1500 440 1940 2000 2900 5.5 415/3/50 37 2000

MINIMUM PLATFORM SIZES

MODEL Cap. VerticalTravel

A

HeightMin Max

BaseWidth

D

BaseLength

E

Power Unit Elev. timewith

std PU

Weightc/w Std

Plt

Std Platform Safety bar only

Skirt only SB & Skirt No SB or skirt Max Platform

B C L W L W L W L W L W L Wt mm mm mm mm kW Supply sec. kg mm mm mm mm mm mm

AS1-1600 1 1610 250 1860 1000 2185 2.4 415/3/50 24 850

AS2-1600 2 1610 250 1860 1000 2185 2.4 415/3/50 32 860 2300 1150 2260 1150 2440 1260 2550 1370 2190 1000 3000 1800

AS3-1600 3 1610 250 1860 1000 2185 4 415/3/50 32 870

AS1-1600W 1 1610 250 1860 1400 2185 2.4 415/3/50 24 950

AS2-1600W 2 1610 250 1860 1400 2185 2.4 415/3/50 32 960 2300 1550 2260 1550 2500 1660 2550 1770 2190 1400 3000 2200

AS3-1600W 3 1610 250 1860 1400 2185 4 415/3/50 32 970

AS1-1800 1 1815 275 2090 1000 2440 2.4 415/3/50 24 950

AS2-1800 2 1815 275 2090 1000 2440 2.4 415/3/50 32 960 2550 1200 2530 1180 2740 1300 2830 1390 2460 1025 3300 1800

AS3-1800 3 1815 275 2090 1000 2440 4 415/3/50 32 960

AS1-1800W 1 1815 275 2090 1400 2440 2.4 415/3/50 24 1050

AS2-1800W 2 1815 275 2090 1400 2440 2.4 415/3/50 32 1060 2550 1600 2530 1580 2740 1700 2830 1790 2460 1425 3300 2200

AS3-1800W 3 1815 275 2090 1400 2440 4 415/3/50 32 1060

AS1-2000 1 2010 340 2350 1000 2680 2.4 415/3/50 30 950

AS2-2000 2 2010 340 2350 1000 2680 2.4 415/3/50 40 960 2800 1200 2800 1180 2900 1300 3020 1400 2680 1045 3600 2000

AS3-2000 3 2010 340 2350 1000 2680 4 415/3/50 36 960

AS1-2000W 1 2010 340 2350 1400 2680 2.4 415/3/50 30 1050

AS2-2000W 2 2010 340 2350 1400 2680 2.4 415/3/50 40 1060 2800 1600 2800 1580 2900 1700 3020 1800 2680 1445 3600 2400

AS3-2000W 3 2010 340 2350 1400 2680 4 415/3/50 36 1060

If these specifi cations do not meet your requirements, contact Safetech for a customised Lift Table.

* Any model with a ‘W’ denotes a wide base Lift Table.

LIFT TABLE CONTROLSA choice of footswitch, hand held pendant, surface or pedestal mounted pushbutton control.

LOLIFTThe LoLift ultra low profile scissor lift table is ideally suited for use with a hand pallet truck.With a capacity of 1000 kg’s and a low height of just 40mm the LoLift can be used in applications where wheeled access onto the lift deck is essential, including hand pallet industrial applications. The LoLift is also available as a disability access lift.

L

E

A

B

C

W

D

LOLIFTThe LoLift ultra low profile scissor lift table is ideally suited for use with a hand pallet truck.With a capacity of 1000 kg’s and a low height of just 40mm the LoLift can be used in applications where wheeled access onto the lift deck is essential, including hand pallet industrial applications. The LoLift is also available as a disability access lift.