Proton - EFFEGIBREVETTI · 2018-04-14 · Effegibrevetti Proton Cerniera per ante a battente e a...
Transcript of Proton - EFFEGIBREVETTI · 2018-04-14 · Effegibrevetti Proton Cerniera per ante a battente e a...
Catalogo e manuale tecnicoCatalogue and technical manual
ProtonCerniera a scomparsa per Ante a Battente e a RibaltaRecessed hinge for Swing and Flap Doors
Effegibrevetti | Proton
Cerniera per ante a battente e a ribalta montata a scompar-sa all’interno di piani fresati. Per ante con spessore da 18 a 40 mm. La posizione dell’anta è regolabile orizzontalmente e verticalmente.Materiali: Zama, Acciaio. Finiture: Nichelata, Nichelata Nera.
Hinge for swing and flap doors mounted recessed into milled panels. Designed for doors from 18 to 40 mm thickness.Door’s position is adjustable horizontally and vertically.Materials: Zama, Steel. Finishings: Nickel Plated, Black Nickel Plated .
Proton
Regolazione orizzontale e verticale antaHorizontal & vertical adjustment
Spessore anta da 18 a 40 mmDoor’s thickness from 18 to 40 mm
Angolo d’apertura 105°Door’s opening angle 105°
105°
Effegibrevetti | Proton
Spazio occorrente per l’apertura dell’anta (A)Space required for door’s opening (A)
3
4
5
6
0,2
18 20 22 25 28 30 40
0,4 0,7 1,1 1,6 7,6 14,2
0,2 0,4 0,7 1,1 1,6 6,6 -
0,2 0,4 0,7 1,1 1,5 - -
0,2 0,4 0,7 1,1 1,5 - -
K S
RegolazioniAdjustments
Regolazione orizzontale posizione antaHorizontal door’s position adjustment
Regolazione verticale posizione antaVertical door’s position adjustment
± 1,5 ± 2
Utensile: chiave esagonale 2,5 mmTool: 2,5 mm Allen key
K
4
A
S
K
4
A
S
Effegibrevetti | Proton
Foratura base e cappelloTop & bottom panel drilling
Foratura antaDoor drilling
P 3 5 -6 164
B 14,5 16,515,5 17,5 27,5-
71,2
60,2
32
10
3
P B
16,2
35
,5
30,1
14,1 14,1
Ø10,2
A + k + 14,8
MontaggioAssembly
65,7
9,7
K
3,8
5
8,6
3 10,4
63,2
17,4
31,
4
R4
Effegibrevetti | Proton
Foratura anta alluminioAluminium door drilling
50PTANGXXSX30
50PTANGXXDX30
76
,3
20
20
TSCE M4x7,5
TSCE M4x7,5
TSCE M4x14
TSCE M4x12
64,3
20
7,3
27
,3
Il supporto per anta in alluminio è un accessorio opzionaleThe support for aluminum door's connection is an optional accessory
ATTENZIONE - WARNING
!
Effegibrevetti S.r.l.
Via Cava Trombetta 17/2520090 Segrate Milano Italy
Tel +39 02 26921838Fax +39 02 26921737
Il catalogo di Effegibrevetti contiene:
• Aperture a Ribalta• Aperture a Pacchetto • Aperture Verticali • Aperture Oblique• Apertura a Pantografo• Aperture Scorrevoli Complanari• Aperture Scorrevoli• Cerniere• Bussole a Espansione• Giunti Orizzontali• Giunti Verticali• Giunti a Scatto• Reggiripiani• Livellatori• Push to Open
*Effegibrevetti ha la facoltà di apportare ai prodotti tutte le modifiche e migliorie tecniche.
Effegibrevetti’s catalog contains:
• Flap Openings• Folding Openings• Vertical Openings • Oblique Openings• Pantograph Openings• Coplanar Sliding Mechanisms• Standard Sliding Mechanisms• Hinges• Spreading Dowels• Horizontal Fittings• Vertical Fittings• Snap Fittings• Shelf Supports• Levellers• Push to Open
*Effegibrevetti reserve the right to make changes and technical improvements to its products.
V. 2
017
Rev
. 1