Prospekt CC Grind 72dpi En

8/12/2019 Prospekt CC Grind 72dpi En

1/4

NEW

CC-GRIND Grinding Discs from PFERDFor professional stock removal

Maximum profitability through ultimate removal rate

Minimum set-up times thanks to toolless quick-clamping system

Low grinding temperature thanks to patented cooling system


2/42

Maximum profitability thanks to ultimate removal rate

CC-GRIND Grinding Discs from PFERD

For highly abrasive grinding with ultimatestock removal and very good tool life on largesurfaces. The special grinding disc versioncombined with the matching backing pad

guarantees maximum machining capacity ina very short time.

The backing pad and grinding disc areequipped with a patented quick-clampingsystem. This guarantees toolless grinding discreplacement.

Advantages:

Quick-clamp system, high-performance grind-ing agents and optimum cooling system mean

workpiece temperature reduced by up to30%abrasiveness increased by up to 40%tool life increased by up to 30%

low-vibration work

little noise developmentgrinding goes easy on the machine

Recommendation for use:

Only use CC-GRIND grinding discs forsurface grinding. Not suitable for edgegrinding.Avoid use on sharp edges as far as possibleto prevent tool damage.

Safety note:

For safety reasons the stated max. RPM levelmust not be exceeded.

Safety recommendations:

The maximum permitted peripheral speed is 80 m/s.

= Wear a respirator!= Wear eye protection!

=Only permitted with a backingpad!

= Wear hearing protection!

= Not permitted for wet grinding!= Read the instructions!

Profitabilityincreased by 35%

Thanks to the combination of significantlyincreased abrasiveness during the grindingprocess and the longer tool life, CC-GRINDimproves profitability by around 35% com-pared with a conventional reinforced grindingdisc.

Noise and vibrationreduced by 50%

The grinding disc CC-GRIND from PFERDreduces noise and vibration load by about50% compared with conventional reinforcedgrinding discs.

PFERDERGONOMICS recommends the CC-GRIND abrasive disc as an innovative toolsolution for hard and rough jobs.

For further information and suitable PFERDtools see the brochure PFERDERGONOMICS The focus is on people.

+

Aggressivitt +40%

+

Standzeit

+30%

Reinforced grinding wheel

CC-GRIND grinding disc

Abrasiveness

Toollife


3/43

Order No. EAN4007220

Dia. D[mm]

Suitablebacking pad

Max.speed[RPM]

N! CC-GRIND 115 SG-STEEL 835876 115 CC-GT GRIND-STEEL 115/125 M14 13.300 25 0,750N! CC-GRIND 125 SG-STEEL 835883 125 CC-GT GRIND-STEEL 115/125 M14 12.200 25 0,875

PFERD STEEL version for ultimate stockremoval performance on steel.

Workpiece materials:Steel

Ordering note:Please order backing pad separately.

CC-GRIND grinding discsType STEEL


Dia. D[mm]

Suitablebacking pad

Max.speed[RPM]

N! CC-GRIND 115 SG-INOX 835890 115 CC-GT GRIND-INOX 115/125 M14 13.300 25 0,750

N! CC-GRIND 125 SG-INOX 835906 125 CC-GT GRIND-INOX 115/125 M14 12.200 25 0,875

PFERD INOX version for cool grinding withvery good stock removal on stainless steel(INOX).

Workpiece materials:Stainless steel (INOX)

Ordering note:Please order backing pad separately.

CC-GRIND grinding discsType INOX


Thread Suitable formachine types

N! CC-GT GRIND-STEEL 115/125 M14 835852 M14 Angle grinders 115 and 125 with M14 spindle 1 0,165

N! CC-GT GRIND-INOX 115/125 M14 835869 M14 Angle grinders 115 and 125 with M14 spindle 1 0,165

With this backing pad, CC-GRIND grindingdiscs can be used on standard angle grinders.

The geometry of the cooling slits ensures highair flow. This significantly reduces the thermal

load on the grinding agent and the tool.

The patented quick-clamping system reducestool changing times to a minimum.

The special backing pad design significantlyincreases grinding performance.Type STEEL = greyType INOX = blue

Safety notes:The maximum permitted peripheral speed is80 m/s.

CC-GRIND backing pads

Performance Line SG-ELASTIC

CC-GRIND Grinding Discs from PFERD


4/44 www.pferd.com [email protected] quality certified according to EN ISO 9001.

PFERDworldwide. And locally.

Germany

August Rggeberg

GmbH & Co. KGPFERD-WerkzeugeHauptstrae 1351709 MarienheideTel. + 49 (0) 22 64 - 90Fax + 49 (0) 22 64 - 9400www.pferd.com

Domestic [email protected]

Sales [email protected]

Sales [email protected]

Australia

PFERD-Australia (Pty.) Ltd.

1-3 Conifer CrescentDingley, Vic. 3172Tel. + 61 - 3 - 95 65 32 00Fax + 61 - 3 - 95 65 32 99www.pferd.com.au

Austria

PFERD-Rggeberg GmbHPrinz-Eugen-Strae 174020 LinzTel. + 43 - 7 32 - 79 64 11-0Fax + 43 - 7 32 - 79 64 22www.pferd-rueggeberg.at

Belgium

bvba PFERD-Rggeberg sprlWaterranonkelstraat 2 aRue de la Grenouillette1130 Brussel - BruxellesTel. + 32 - 2 - 2 47 05 90Fax + 32 - 2 - 2 16 30 54www.pferd.be

Brazil

PFERD-Rggeberg do Brasil Ltda.BR 277 no. 4.654 km 2 - CIC82305-200 Curitiba - PR

Tel. + 55 - 41 - 30 71 82 22Fax + 55 - 41 - 30 71 82 00www.pferd.com.br

Canada

PFERD of Canada5570 McAdam Rd.Mississauga, Ontario L4Z 1P1Tel. + 1 - 905 - 501 - 1555Fax + 1 - 905 - 501 - 1554www.pferdcanada.ca

China

PFERD-Tools Shanghai OfficeKong Jiang Road No. 1688Wei Bai Xin Bldg# 6th, Floor, Room 608Yang Pu District200092 Shanghai/ChinaTel. + 86 - 21 - 51 15 70 99Fax + 86 - 21 - 51 15 70 66www.pferd.cn

France

PFERD-Rggeberg France S.A.R.L.Zone dActivits Economiques2, Avenue de la Concorde

Ernolsheim-sur-Bruche67129 Molsheim CdexTel. + 33 - 3 88 - 49 72 50Fax + 33 - 3 88 - 38 70 17www.pferd.fr

Italy

PFERD-Italia s.r.l.

Via G. Di Vittorio 33/7-920068 Peschiera Borromeo (MI)Tel. + 39 - 02 - 55 30 24 86Fax + 39 - 02 - 55 30 25 18www.pferd.it

Mexico

PFERD-FANDELI S.A. de C.V.Edo. de MxicoAv. Presidente Jurez, 225Col. San Jernimo Tepetlacalco54090 TlalnepantlaTel. + 52 - 55 - 53 66 - 14 00Fax + 52 - 55 - 53 66 - 14 44www.pferd-fandeli.com.mx

Netherlands

PFERD-Rggeberg B.V.Hekven 15 bis., Postbus 20704824 AD/4800 CB BredaTel. + 31 - 76 - 5 93 70 90Fax + 31 - 76 - 5 42 10 33www.pferd.nl

Poland

PFERD-VSM Sp.z o.o.ul. Polna 1A

62-025 Kostrzyn Wlkp.Tel. + 48 - 61 - 8 97 04 80Fax + 48 - 61 - 8 97 04 90www.pferdvsm.pl

Singapore

PFERD-Asia Pacific Pte. Ltd.808, French Road#03-179, Kitchener ComplexSingapur 200808Tel. + 65 - 62 96 53 93Fax + 65 - 62 96 43 83www.pferd.com

South Africa

PFERD-South Africa (Pty.) Ltd.32 Derrick RoadP.O. Box 588Kempton Park, 1620Spartan, Kempton ParkTel. + 27 - 11 - 2 30 40 00Fax + 27 - 11 - 3 94 12 32www.pferd.co.za

Spain

PFERD-Rggeberg S.A.C/Jndiz, 18

Pol. Ind. Jndiz01015 Vitoria-GasteizTel. + 34 - 9 45 - 18 44 00Fax + 34 - 9 45 - 18 44 18www.pferd.es

Turkey

PFERD Asindirici Takimlar Ltd. Sti.

Aydintepe Mah.Sahilyolu Cad. 25 - 7/D34959 Tuzla IstanbulTel: +90 - 216 494 03 00Fax: +90 - 216 494 22 11www.pferd.com

Sweden

PFERD-VSM ABDalnum 37Dalnum Hus 224181 70 LidingTel. + 46 - 8 - 564 72 300Fax + 46 - 8 - 564 72 301www.pferd-vsm.se

Switzerland

PFERD-VITEX (Schweiz) AGWerkzeuge und SchleifmittelZrichstrasse 38bPostfach 228306 BrttisellenTel. + 41 - 44 - 805 28 28Fax + 41 - 44 - 805 28 00www.pferd-vitex.ch

U.K.

PFERD LTD.4 Westleigh Hall, Wakefield RoadDenby DaleWest Yorkshire HD8 8QJTel. + 44 - 14 84 - 86 61 49Fax + 44 - 14 84 - 86 59 38www.pferd.ltd.uk

USA

PFERD INC.PFERD Milwaukee Brush Co.30 Jytek DriveLeominster, MA 01453Tel. + 1 - 978 - 8 40 - 64 20Fax + 1 - 978 - 8 40 - 64 21

www.pferdusa.com

02/2010

S

ubjecttotechnicalmodifications.

818146

PrintedinGermany.

Prospekt CC Grind 72dpi En

Documents

Transcript of Prospekt CC Grind 72dpi En