Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California...
-
date post
23-Jan-2016 -
Category
Documents
-
view
216 -
download
0
Transcript of Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California...
![Page 1: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/1.jpg)
Prospect for Attractive Fusion Power(Focus on tokamaks)
Farrokh NajmabadiUniversity of California San Diego
Mini-Conference on Nuclear Renaissance48th annual meeting of APS DDPOctober 31, 2006
Electronic copy: http://aries.ucsd.edu/najmabadi/ARIES Web Site: http:/aries.ucsd.edu/ARIES
![Page 2: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/2.jpg)
1) Do we have an attractive vision for the final product?
![Page 3: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/3.jpg)
Elements of the Case for Fusion Power Were Developed through Interaction with Representatives of U.S. Electric Utilities and Energy Industry
Have an economically competitive life-cycle cost of electricity
Gain Public acceptance by having excellent safety and environmental characteristics No disturbance of public’s day-to-day activities No local or global atmospheric impact No need for evacuation plan No high-level waste Ease of licensing
Reliable, available, and stable as an electrical power source Have operational reliability and high availability Closed, on-site fuel cycle High fuel availability Capable of partial load operation Available in a range of unit sizes
Fu
sion
ph
ysic
s &
te
chn
olog
y
Low-activation material
![Page 4: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/4.jpg)
Our vision of a fusion system in 1980s was a large pulsed device. Non-inductive current drive is inefficient.
Some important achievements in 1980s: Experimental demonstration of bootstrap current; Development of ideal MHD codes that agreed with experimental results.
Development of steady-state power plant concepts (ARIES-I and SSTR) based on the trade-off of bootstrap current fraction and plasma ARIES-I: N= 2.9, =2%, Pcd=230 MW
Our vision of a fusion system in 1980s was a large pulsed device. Non-inductive current drive is inefficient.
Some important achievements in 1980s: Experimental demonstration of bootstrap current; Development of ideal MHD codes that agreed with experimental results.
Development of steady-state power plant concepts (ARIES-I and SSTR) based on the trade-off of bootstrap current fraction and plasma ARIES-I: N= 2.9, =2%, Pcd=230 MW
A dramatic change occurred in 1990: Introduction of Advanced Tokamak
Last decade: Reverse Shear Regime Excellent match between bootstrap & equilibrium current profile at high Requires wall stabilization (Resistive-wall modes). Internal transport barrier.
![Page 5: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/5.jpg)
Reduced COE mainly due to advanced technology
Approaching COE insensitive of power density
Advanced Tokamak lead to attractive power plants
1st Stability,
Nb3Sn Tech.
ARIES-I’
Major radius (m) 8.0
) 2% (2.9)
Peak field (T) 16
Avg. Wall Load (MW/m2) 1.5
Current-driver power (MW) 237
Recirculating Power Fraction 0.29
Thermal efficiency 0.46
Cost of Electricity (c/kWh) 10
Reverse Shear
Option
High-Field
Option
ARIES-I
6.75
2% (3.0)
19
2.5
202
0.28
0.49
8.2
ARIES-RS
5.5
5% (4.8)
16
4
81
0.17
0.46
7.5
ARIES-AT
5.2
9.2% (5.4)
11.5
3.3
36
0.14
0.59
5
![Page 6: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/6.jpg)
Advanced Brayton Cycle Parameters Based on Present or Near Term Technology Evolved with Expert Input from General Atomics*
Key improvement is the development of cheap, high-efficiency recuperators.
RecuperatorIntercooler 1Intercooler 2
Compressor 1
Compressor 2Compressor 3
HeatRejection
HX
Wnet
Turbine
Blanket
IntermediateHX
5'
1
22'
38
9
4
7'9'
10
6
T
S
1
2
3
4
5 6 7 8
9 10
Divertor
LiPbBlanketCoolant
He DivertorCoolant
11
11
![Page 7: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/7.jpg)
Originally developed for ARIES-ST, further developed by EU (FZK). Typically, the coolant outlet temperature is limited to the max. operating
temperature of structural material (550oC for ferritic steels).
A coolant outlet temperature of 700oC is achieved by using a coolant/breeder
(LiPb), cooling the structure by He gas, and SiC insulator lining PbLi channel for thermal and electrical insulation.
Originally developed for ARIES-ST, further developed by EU (FZK). Typically, the coolant outlet temperature is limited to the max. operating
temperature of structural material (550oC for ferritic steels).
A coolant outlet temperature of 700oC is achieved by using a coolant/breeder
(LiPb), cooling the structure by He gas, and SiC insulator lining PbLi channel for thermal and electrical insulation.
ARIES-ST Featured a High-Performance Ferritic Steel Blanket
![Page 8: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/8.jpg)
Simple, low pressure design with SiC structure and LiPb coolant and breeder.
Outboard blanket & first wall
ARIES-AT2: SiC Composite Blankets
Simple manufacturing technique.
Very low afterheat.
Class C waste by a wide margin.
LiPb-cooled SiC composite divertor is capable of 5 MW/m2 of heat load.
Innovative design leads to high LiPb outlet temperature (~1,100oC) while keeping SiC structure temperature below 1,000oC leading to a high thermal efficiency of ~ 60%.
![Page 9: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/9.jpg)
Innovative Design Results in a LiPb Outlet Temperature of 1,100oC While Keeping SiC Temperature Below 1,000oC
• Two-pass PbLi flow, first pass to cool SiCf/SiC box second pass to superheat PbLi
q''plasma
Pb-17Li
q'''LiPb
Out
q''back
vback
vFW
Poloidal
Radial
Inner Channel
First Wall Channel
SiC/SiCFirst Wall SiC/SiC Inner Wall
700
800
900
1000
1100
1200800
900
1000
1100
1200
1
2
3
4
5
6
00.020.040.060.080.1
00.020.040.060.080.1
Radial distance (m)
Poloidaldistance(m)
SiC/SiC
Pb-17Li
Bottom
Top
PbLi Outlet Temp. = 1100 °C
Max. SiC/PbLi Interf. Temp. = 994 °C
Max. SiC/SiC Temp. = 996°C
PbLi Inlet Temp. = 764 °C
![Page 10: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/10.jpg)
Use of High-Temperature Superconductors Simplifies the Magnet Systems
HTS does offer operational advantages: Higher temperature operation
(even 77K), or dry magnets Wide tapes deposited directly
on the structure (less chance of energy dissipating events)
Reduced magnet protection concerns
HTS does offer operational advantages: Higher temperature operation
(even 77K), or dry magnets Wide tapes deposited directly
on the structure (less chance of energy dissipating events)
Reduced magnet protection concerns
Inconel strip
YBCO Superconductor Strip Packs (20 layers each)
8.5 430 mm
CeO2 + YSZ insulating coating(on slot & between YBCO layers)
Epitaxial YBCOEpitaxial YBCO Inexpensive manufacturing
would consist of layering HTS on structural shells with minimal winding!
Epitaxial YBCOEpitaxial YBCO Inexpensive manufacturing
would consist of layering HTS on structural shells with minimal winding!
![Page 11: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/11.jpg)
Our Vision of Magnetic Fusion Power Systems Has Improved Dramatically in the Last Decade, and Is Directly Tied to Advances in Fusion Science & Technology
Estimated Cost of Electricity (c/kWh)
0
2
4
6
8
10
12
14
Mid 80'sPhysics
Early 90'sPhysics
Late 90's Physics
AdvancedTechnology
Major radius (m)
0
1
2
3
4
5
6
7
8
9
10
Mid 80's Pulsar
Early 90'sARIES-I
Late 90'sARIES-RS
2000 ARIES-AT
Approaching COE insensitive of power density Advanced Technologies is the main lever in reducing fusion power plant costs
![Page 12: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/12.jpg)
Modular sector maintenance enables high availability
Full sectors removed horizontally on rails Transport through maintenance corridors
to hot cells Estimated maintenance time < 4 weeks
Full sectors removed horizontally on rails Transport through maintenance corridors
to hot cells Estimated maintenance time < 4 weeks
ARIES-AT elevation view
![Page 13: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/13.jpg)
10-7
10-6
10-5
10-4
10-3
10-2
10-1
100
101
104 105 106 107 108 109 1010 1011
ARIES-STARIES-RS
Act
ivit
y (
Ci/
W th)
Time Following Shutdown (s)
1 mo 1 y 100 y1 d
Radioactivity Levels in Fusion Power PlantsAre Very Low and Decay Rapidly after Shutdown
After 100 years, only 10,000 Curies
of radioactivity remain in the
585 tonne ARIES-RS fusion core.
After 100 years, only 10,000 Curies
of radioactivity remain in the
585 tonne ARIES-RS fusion core.
SiC composites lead to a very low activation and afterheat.
All components of ARIES-AT qualify for Class-C disposal under NRC and Fetter Limits. 90% of components qualify for Class-A waste.
SiC composites lead to a very low activation and afterheat.
All components of ARIES-AT qualify for Class-C disposal under NRC and Fetter Limits. 90% of components qualify for Class-A waste.
Ferritic SteelVanadium
![Page 14: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/14.jpg)
Fusion Core Is Segmented to Minimize the Rad-Waste
Only “blanket-1” and divertors are replaced every 5 years
Only “blanket-1” and divertors are replaced every 5 years
Blanket 1 (replaceable)
Blanket 2 (lifetime)
Shield (lifetime)
![Page 15: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/15.jpg)
Generated radioactivity waste is reasonable
0
50
100
150
200
250
300
350
400
Blanket Shield VacuumVessel
Magnets Structure Cryostat
Cu
mu
lati
ve
Co
mp
ac
ted
Wa
ste
Vo
lum
e (
m3
)
1270 m3 of Waste is generated after 40 full-power year (FPY) of operation (~50 years) Coolant is reused in other power plants 29 m3 every 4 years (component replacement) 993 m3 at end of service
Equivalent to ~ 30 m3 of waste per FPY Effective annual waste can be reduced by increasing plant service life.
1270 m3 of Waste is generated after 40 full-power year (FPY) of operation (~50 years) Coolant is reused in other power plants 29 m3 every 4 years (component replacement) 993 m3 at end of service
Equivalent to ~ 30 m3 of waste per FPY Effective annual waste can be reduced by increasing plant service life.
90% of waste qualifies for Class A disposal
90% of waste qualifies for Class A disposal
![Page 16: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/16.jpg)
2) How to we get from ITER to an attractive final product
![Page 17: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/17.jpg)
ITERIntegration of fusion plasma
with fusion technologies
A 1st of the kind Power Plant!
“Fusion Power: Research and Development Requirements.” Division of Controlled Thermonuclear Research (AEC).
![Page 18: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/18.jpg)
In the ITER area,we need to develop
a 5,000 ft view
![Page 19: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/19.jpg)
A holistic optimization approachshould drive the development path.
Traditional Approach: Ask each scientific area (i.e., plasma, blanket, …)
What are the remaining major R&D areas?
Which of the remaining major R&D areas can be explored in existing devices or simulation facilities (e.g., fission reactors)? What other major facilities are needed?
Traditional Approach: Ask each scientific area (i.e., plasma, blanket, …)
What are the remaining major R&D areas?
Which of the remaining major R&D areas can be explored in existing devices or simulation facilities (e.g., fission reactors)? What other major facilities are needed?
Holistic Approach: Fusion energy development should be guided by therequirements for an attractive fusion energy source What are the remaining major R&D areas?
What it the impact of this R&D on the attractiveness of the final product. Which of the remaining major R&D areas can be explored in existing devices
or simulation facilities (i.e., fission reactors)? What other major facilities are needed? Should we attempt to replicate power plant conditions in a scaled device
or Optimize facility performance relative to scaled objectives
Holistic Approach: Fusion energy development should be guided by therequirements for an attractive fusion energy source What are the remaining major R&D areas?
What it the impact of this R&D on the attractiveness of the final product. Which of the remaining major R&D areas can be explored in existing devices
or simulation facilities (i.e., fission reactors)? What other major facilities are needed? Should we attempt to replicate power plant conditions in a scaled device
or Optimize facility performance relative to scaled objectives
![Page 20: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/20.jpg)
Elements of the Case for Fusion Power Were Developed through Interaction with Representatives of U.S. Electric Utilities and Energy Industry
Have an economically competitive life-cycle cost of electricity
Gain Public acceptance by having excellent safety and environmental characteristics No disturbance of public’s day-to-day activities No local or global atmospheric impact No need for evacuation plan No high-level waste Ease of licensing
Reliable, available, and stable as an electrical power source Have operational reliability and high availability Closed, on-site fuel cycle High fuel availability Capable of partial load operation Available in a range of unit sizes
Fu
sion
ph
ysic
s &
te
chn
olog
y
Low-activation material
![Page 21: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/21.jpg)
Existing facilities fail to address essential features of a fusion energy source
Metricwaste 3 need to deal with it, but wrong materials, little fluence
reliability 3 some machine operation, little fluence
maintenance 5 unprototypic construction, modules replaced
fuel 3 tritium handling, but no breeding, no fuel cycle
safety 6 hazards are lower, operations different
partial power 4 experience with operating modes
thermal efficiency 0 no power production, low temperature, wrong materials
power density 5 low average power density, local regions of HHF
cost 5 1st of a kind reactor costs, cost reduction needed
ITER
Metricwaste 0 little relevance
reliability 1 some machine operation, no fluence
maintenance 1 experience moving tokamak equipment
fuel 1 Some tritium handling, no breeding, no fuel cycle
safety 2 hazards much lower, operations much different
partial power 2 experience with operating modes
thermal efficiency 0 no power conversion
power density 1 low power handling required, some divertor heating
cost 1 not relevant to a power plant
D3/JET
![Page 22: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/22.jpg)
ITER is a major step forward but there is a long road ahead.
Present Experiments
![Page 23: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/23.jpg)
Power plant features and not individual parameters should drive the development path
Absolute parameters Absolute parameters Dimensionless parameters Dimensionless parameters
![Page 24: Prospect for Attractive Fusion Power (Focus on tokamaks) Farrokh Najmabadi University of California San Diego Mini-Conference on Nuclear Renaissance 48th.](https://reader035.fdocuments.us/reader035/viewer/2022062519/56649d565503460f94a343ab/html5/thumbnails/24.jpg)
There is a need to examine fusion development scenarios in detail
We need to start planning for facilities and R&D needed between ITER and a power plant.
Metrics will be needed for cost/benefit/risk tradeoffs
An integrated, “holistic” approach, based on the requirements for an attractive fusion energy source, provides a path to an optimized development scenario and R&D prioritization.
Developing power-plant fusion technologies is the pace-setting element in developing fusion.
Fusion and advanced fission systems have similar R&D issues, we can leverage substantially on advanced fission effort (but we need to be at the table).
We need to start planning for facilities and R&D needed between ITER and a power plant.
Metrics will be needed for cost/benefit/risk tradeoffs
An integrated, “holistic” approach, based on the requirements for an attractive fusion energy source, provides a path to an optimized development scenario and R&D prioritization.
Developing power-plant fusion technologies is the pace-setting element in developing fusion.
Fusion and advanced fission systems have similar R&D issues, we can leverage substantially on advanced fission effort (but we need to be at the table).