ProRox PS 970IN - AIS Group · 2017. 3. 29. · λ(W/mK) 0.037 0.043 0.051 0.059 0.070 0.082 ASTM...
Transcript of ProRox PS 970IN - AIS Group · 2017. 3. 29. · λ(W/mK) 0.037 0.043 0.051 0.059 0.070 0.082 ASTM...
-
INDUSTRIAL AND TECHNICAL
Application
Compliance
ProRox IN PS 970
www.rockwoolasia.com
TM
FACTORY:
ROXUL-ROCKWOOL Insulation India Pvt. Ltd.Plot-Z/4, Dahej SEZ, DahejDistrict Bharuch-392 130Gujarat-IndiaT (+91) 2641 619400F (+91) 2641 256292
Disclaimer: The information contained in this data sheet is believed to be correct at the date of publication. ROCKWOOL does not accept responsibility for the consequences of using ProRox in applications different from those described above.
Old name: Rockwool 851
ProRox PS 970 is a pre-formed heavy duty stonewool pipe section. The sections are supplied split and hinged for easy snap-on assembly and are especially suitable for the thermal and acoustic insulation of industrial pipe work which is exposed to high temperatures and light mechanical loads (e.g. vibrations).
INProRox PS 970 Pipe Sections full comply with the requirements as set by internationally recognized standards ASTM C547 type II.
Product propertiesPerformance Standard
Thermal Conductivity*Mean Temp( C)° 50 100 150 200 250 300
λ(W/mK) 0.037 0.043 0.051 0.059 0.070 0.082 ASTM C335/ EN ISO 8497 λ(W/mK) 0.038 0.044 0.054 0.060 0.071 0.083 IS 9842 / IS 3346
Density 150 Kg/m3 IS 9842 / IS 5688
Heat Resistance No visible deterioration of the fibrous structure.No evidence of self heating. No fusion of fibers @ 650°C
IS 3144 / IS 9842
Maximum Service Temperature 640 C (1184 F)750°C (1382°F)° ° EN 14707
ASTM C411
Incombustibility* 4.20% IS 9842 / IS 3144
Reaction to FireA1L
Surface burning characteristics; Flame spread = Passed,Smoke development = Passed
EN 13501-1ASTM E 84
pH* 8.0 IS 9842 / IS 3144
Water leachable chloride content*Chloride content 7.5 mg/kg,
As-quality for use over Stainless steel Conformsto the Stainless steel stress corrosion specification
EN 13468 / IS3144 ASTM C795ASTM C871
Sulphur content* 0.016% IS 9842 / IS 3144
Water absorption*2Water absorption 0.14 Kg/m
Water vapour absorption (vapor sorption) 0.013% volEN 13472
ASTM C1104 M
Shot Content*
> 150 μm 7.3 %ASTM 1335> 300 μm 1.82 %
> 850 μm 0.32 %> 250 μm 4.7 %
IS 8183 / IS 3144> 500 μm 1.42 %
Note: *Best Tested Values
TMROCKWOOL PRODUCTSHEET
200 335IN-03/15_V1 (EN)