Prop Tableform Mobility Assembly Beams - RMD Kwikform...Prop Heads secure the prop leg to both the...
Transcript of Prop Tableform Mobility Assembly Beams - RMD Kwikform...Prop Heads secure the prop leg to both the...
GTX to GTX Cleat
The GTX to GTX cleat is used to connect primary and secondary GTX beams at right angles. Secured in place with either double headed nails or screws.
Secondary GTX Beam
Primary GTX Beam Double Headed Nails or Screws by Customer
Swivel Castor Wheel
The Swivel Castor Wheels are pressed from Heavy Sheet Steel and incorporate a Double Ball Bearing Head as well as Safety Stop Locks which all combine to provide maximum safety and incredible durability.
Position and fix the Plywood to the Tableform as detailed on the RMD Kwikform Drawings.
Remove Secondary Beam Clamp Plates and lay out the Prop Heads to approx leg centres. Place the Primary Beams into the Prop Heads, mark on these the Secondary Beam and Prop Leg locations.
Place outer 4 Secondary Beams over the Prop Heads and re-attach the Clamp Plates. Tighten Plates, check the Formwork is level and the diagonals are equal to ensure the frame is square.
Place a string line along one edge of the 4 outer Secondary Beams. Position the remaining Secondary Beams and fix them to the Primary Beams with the GTX to GTX Cleats.
Lift the Tableform onto the Prop Attachment Jig. Attach the Prop to the Prop Heads.
Remove the completed Tableform from the Jig and position on site as detailed on the RMD Kwikform drawing.
2Table Props
Galvanised Table Prop with Safe Working Load (SWL) of up to 35kN, for Prop No. 1 & 2; 50kN for Prop No.3.
Max
imum Leg Rotation
Maximum Leg Rotatio
n
Tripod Leg (Fix)
Guide Plate
Prop Holding PlateProp
Tripod Leg (Rotating)
Tripod Leg (Rotating)
Plan View
Tripod Leg
752
752
405
Guide Plate
Prop Holding Plate
Guide PlateProp
Guide Tube
Elevation
GTX Beams
The GTX Beam is a structural laminated veneer timber beam for use as a primary and secondary bearer for Tableforms.
PRM20001PRM20002
Prop Heads
Prop Heads secure the prop leg to both the primary and secondary beams, creating a robust framework for the table.
Tripod
The Tripod is used to secure horizontal displacement of table and soffit formwork.
Multi Purpose Trolley
The Multi Purpose Trolley is used in conjunction with the Table Prop Swivel Castor Wheels for repositioning tables of any size. The use of hydraulics in the Multi Purpose Trolley makes light work of lowering the Tables while the Swivel Castor Wheels allow speedy and effortless relocation of the tables with minimal manpower.
C-Hook
The C-Hook enables the quick and easy lifting of tables to higher floors. Single and double height C-Hooks are available, allowing 2 floors of tables to be utilised at the same time. Tables are attached to the C-Hook and the whole system is lifted and repositioned, requiring no cut outs in the soffit formwork. Double and Single height C-Hooks can be used for table lengths up to a maximum of 6.0m.
Table Prop No. 1
Table Prop No. 2
Code Description Range (mm) Weight (Kg)PRM10001 Table Prop - No. 1 1880 - 3020mm 29.0
PRM10002 Table Prop - No. 2 2390 - 3430mm 31.8
PRM10012 Table Prop - No. 3 2780 - 4020mm 37.1
Code Beam Length Colour Code Weight (Kg)GTX11200 1200mm Purple 6.6
GTX11800 1800mm Brown 9.9
GTM12100 2100mm Violet 11.6
GTX12400 2400mm Yellow 13.2
GTM12700 2700mm Light Blue 14.9
GTX13000 3000mm Grey 16.5
GTX13600 3600mm Red 19.8
GTX14200 4200mm White 23.1
GTX14800 4800mm Dark Green 26.4
GTX15400 5400mm Black 29.7
GTX16000 6000mm Blue 33.0
Code Description Weight (Kg)PRM20001 Prop Head Twin GTX Beam 14.6
PRM20002 Prop Head Single GTX Beam 13.9
PRM20004 Prop Head Single Alform Beam 13.9
Code Description Weight (Kg)GTM00005 GTX to GTX Cleat 0.2
GTM00010 Double Headed Nails(Per Kg)
1.0
Code Description Weight (Kg)PRM00005 Tableform Prop Tripod 12.0
Code Description Weight (Kg)PRM10003 Multi Purpose Trolley 246.0
Code Description Weight (Kg)PRM10600 Swivel Castor Wheel with Brake 6.7
Step 1 Step 2
Step 3 Step 4
Step 5 Step 6
Step 7
Prop Tableform Mobility Assembly
Alform Beams
Alform 150mm deep Aluminium Beam use as a primary and secondary bearer for Tableform.
Code Description Weight (Kg)AFX11200 Alform 1200mm 6.8
AFX11800 Alform 1800mm 10.1
AFX12100 Alform 2100mm 11.8
AFX12400 Alform 2400mm 13.5
AFX12700 Alform 2700mm 15.2
AFX13000 Alform 3000mm 16.9
AFX13600 Alform 3600mm 20.2
AFX14200 Alform 4200mm 23.7
AFX14800 Alform 4800mm 27.1
AFX15400 Alform 5400mm 30.5
AFX16000 Alform 6000mm 33.9
AFX16600 Alform 6600mm 37.3
AFX17200 Alform 7200mm 40.6
Code Description Weight (Kg)
ASX10067 Folding Telescopic C-Hook Single Height SWL = 1.75 tons
1,002.0
ASM10068 Folding Telescopic C-Hook Double Height SWL = 1.75 tons
1,139.0
ASM10006 Alshor C-Frame Chain & Assembly (set of slings & a chain host)
82.0
Note: SWL includes chains and slings.
Our policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, capacity, design, weight, dimension or code without prior notice being given.
For further technical information on Prop Tableform please refer to the Prop Tableform Technical Data Sheets, or contact your local RMD Kwikform Technical Office.
Beams
AFX11800
AFX11500
3767
(Max
imum
Sof
fit H
eigh
t)34
49 (M
axim
um E
xten
sion
)31
8
135mmStriking
Gap
1040
(Ext
ensi
on
Ran
ge)
2409
(Min
imum
Ext
ensi
on)
318
2727
(Min
imum
Sof
fit H
eigh
t)
3039
(Max
imum
Ext
ensi
on)
3357
(Max
imum
Sof
fit H
eigh
t)31
8
318
135mmStriking
Gap
1144
(Ext
ensi
on
Ran
ge)
1895
(Min
imum
Ext
ensi
on)
2213
(Min
imum
Sof
fit H
eigh
t)
Prop Tableform
Mid
dle
East
Offi
ces
UAE - SharjahRMD Kwikform Middle East L.L.C.,P.O. Box 5801,Sharjah, UAE.T: +971 6 553 4173F: +971 6 553 4327E: [email protected]
Middle East Head OfficeP.O. Box 5801,Sharjah,UAE.T: +971 6 553 4173F: +971 6 553 4327E: [email protected]
LebanonATCO SARL,Hazmieh, Lebanon,Hobeika Centre, 3rd Floor.T: +961 545 0214 F: +961 595 5387E: [email protected]
KuwaitP.O. Box 21403, Safat 13075, Kuwait.T: +965 222 112 12F: +965 222 111 91E: [email protected]
BahrainRMD Kwikform (Almoayed) Bahrain W.L.L.,P.O. Box 21475, Flat 34, Building 5, Road 3001, Abu Qhazal, Manama, Kingdom of Bahrain.T: +973 1738 2724F: +973 1738 2624E: [email protected]
Saudi Arabia - JeddahRMD Kwikform Saudi Arabia L.L.C.,P.O. Box 128422,Jeddah 21362, Kingdom of Saudi Arabia.T: +966 12 664 8155F: +966 12 664 8630E: [email protected]
Saudi Arabia - Al KhobarRMD Kwikform Saudi Arabia L.L.C.,P.O. Box 921,Al Khobar 31952,Kingdom of Saudi Arabia.T: +966 13 896 8665F: +966 13 896 8664E: [email protected]
QatarRMD Kwikform (Al Maha) Qatar W.L.L.,P.O. Box 405,Doha, Qatar.T: +974 4 465 3034F: +974 4 465 3282E: [email protected]
OmanRMD Kwikform Oman L.L.C.,P.O. Box 152,Post code 103, Muscat, Sultanate of Oman.T: +968 2413 7828 F: +968 2413 7998E: [email protected]
UAE - Abu DhabiRMD Kwikform Middle East L.L.C.,P.O. Box 106405,Abu Dhabi, UAE.T: +971 2 550 2383F: +971 2 550 2384E: [email protected]
UAE - DubaiRMD Kwikform Middle East L.L.C.,P.O. Box 115480,Dubai, UAE.T: +971 4 885 0707F: +971 4 885 0727E: [email protected]
Saudi Arabia - RiyadhRMD Kwikform Saudi Arabia L.L.C.,P.O. Box 26320,Riyadh 11486,Kingdom of Saudi Arabia.T: +966 11 445 8991F: +966 11 445 8992E: [email protected]
Issued May 2017