Promat HPI in Concentrated Solar Thermal Power · OUR ACTIVITIES IN CONCENTRATED SOLAR POWER Solar...
Transcript of Promat HPI in Concentrated Solar Thermal Power · OUR ACTIVITIES IN CONCENTRATED SOLAR POWER Solar...
Promat HPI
in Concentrated Solar Thermal Power
OUR PRODUCTS AND BENEFITS
Microporous products
Promat HPI offers a wide range of microporous products ideally suited
to the CSP market comprising rigid and flexible panels and moulded
pipe sections.
All our microporous products have a thermal conductivity that is close
to the lowest theoretically possible across all temperatures right up
to 1200°C making them at least 4 to 5 times better performing then any
conventional insulation material at 1000°C.
The unbeatable performance of microporous insulation results in a number
of benefits including:
• Reduced thickness of insulation.
• Reduced insulation weight.
• The possibility to save space.
• The possibility to increase the internal capacity of an assembly.
• Reduction of heat loss resulting in energy savings.
High temperature modules (SCUTTHERM®)
SCUTTHERM® modules are high temperature resistant composite panels
used for heat shielding on solar towers.
SCUTTHERM® modules offer some very important properties and
characteristics:
• Good thermal surface resistance up to 1600°C
• High resistance to solar radiation
• High solar absorbance
• High UV absorbance
Since the start of the industrial revolution our dependence on fossil fuels has steadily polluted
our world. Greenhouse gasses, acid rain, and smog are all aspects of man made pollution.
Today, the global focus is away from dwindling fossil fuel reserves and towards sustainable
and renewable energy sources.
Concentrated Solar Power (CSP) is probably one of the most attractive technologies to help and achieve the targets set for producing
sustainable energy because of the unlimited solar energy reserves available in the sunny regions of the world.
Promat HPI delivers insulation solutions for all Concentrated Solar Power technologies. We supply innovative systems for parabolic trough
and solar tower applications and we are also actively involved in the solar dish and linear fresnel technologies. Promat R&D consistently
introduce new state-of-the-art and cost effective engineered solutions. In addition, we also offer a product range that can be used as heat
shielding for the area surrounding the solar receiver of a solar tower.
OUR ACTIVITIES IN CONCENTRATED SOLAR POWER
Solar tower CSP systems
In recent years, several EPC companies & technology providers have
developed different types of solar towers. For each different approach,
a solar tower system comprises multiple stages each of which can ben-
efi t from a Promat HPI engineered insulation solution.
These stages include:
• Solar receiver
• Heat storage vessels.
• Distribution piping to and from the receiver
• Hot air lines.
• Outside heat shield.
• Protection to cavity of the receiver area.
Microporous product such as MICROTHERM® PANEL, MICROTHERM®
OVERSTITCHED and MICROTHERM® MPS are widely used to insulate
both volumetric and cylindrical receivers, hot boxes protecting pipes and
valves connected to the receiver, and distribution piping in the solar tower.
Microporous products offer excellent performance even at elevated
pressures and in atmospheres other than air.
For one project, Promat HPI delivered ALSIFLEX® refractory ceramic
wools and modules that were used to insulate the heat storage vessels
and the hot air lines. The main advantages of these lightweight RCF
wools are the very low density resulting in lightweight linings, and the
superior thermal shock resistance.
Promat HPI combines a vast product range with unmatched technical
service and engineering capabilities. Our involvment from the project
beginning at the design stage ensures that we are able to provide the
most efficient and cost effective insulation solution.
External heat shielding to solar tower
SCUTTHERM® are composite panels that are used in the design
of engineered, custom made thermal heat shields. They are
assembled as modules for fast and simple installation and can
easily be fi xed to either a metal structure or to the concrete wall
of the solar tower itself, directly above and/or under the solar
receiver.
Anchorage pins are cleverly designed to eliminate the possibility
of solid conduction of heat through the insulation.
SCUTTHERM® can also be used to protect the inside cavity of
the solar receiver.
Parabolic trough CSP Systems
Throughout our involvement in this market we have developed
several insulation solutions for Ball Joint Assemblies (BJAs) of
parabolic troughs.
Promat HPI now offers several BJA design solutions:
• Our original solution based on tailored fl exible jackets
incorporating MICROTHERM® OVERSTITCHED PANEL
• Our second generation system combining MICROTHERM® MPS
with an Alu Cladding.
• Our latest design solution utilising large size fl exible jackets to
protect recently developed fl exible ball joint hoses.
Advantages of a Promat HPI insulation solution for BJAs include:
• They allow rotational movement at the joint while controlling
loss of heat energy
• Increased plant efficiency by controlling heat losses
• Long lifetime
• Excellent passive fi re protection (PFP) material combined with
Alu foil internal - fi nishing helps to prevent fi re
• Leakages are quickly traceable
• Quickly removable for routine maintenance inspections.
Distribution pipe runs
The overall operational effi ciency of any solar power collection
system is directly related to the control of system energy losses.
Promat HPI insulation systems utilising moulded pipe sections
(MPS) for smaller diameters, and fl exible insulation products for
larger diameters, are fast to fit and totally cost effective when
compared to less effi cient conventional insulation products.
As our microporous insulation is easy to cut and shape on site,
diffi cult parts such as pumps and valves can be quickly and
effi ciently insulated to maintain a consistent thermal performance.
Pipe supports
Promat HPI offers simple solutions based on fl exible microporous
products for the insulation of pipe clamps. These give a number
of technical as well as economic advantages including:
• Reduced heat loss from thermal bridges through direct metal
contact
• Thinnest insulation keeping pipe clamps as compact as possible
• High compression resistance so the insulation thickness can
be maintained irrespective of the weight of the pipe load being
supported
• By reducing the temperature in the supports,
lower grade steel can be used reducing the cost
OUR PRODUCTS AND BENEFITS
Parabolic Trough plants
• Solnova 1 (ES): 50MW,
Flexible ball joint jackets
• Solnova 3 (ES): 50MW,
Flexible ball joint jackets
• Extresol 1 (ES): 50MW,
Flexible ball joint jackets
• Extresol 2 (ES): 50MW,
Flexible ball joint jackets
• La Dehesa (ES): 50MW,
Flexible ball joint jackets
• La Florida (ES): 50MW,
Flexible ball joint jackets
• Andasol 3 (ES): 50MW,
pipe clamp insulation
• Valle 1 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Valle 2 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Manchasol 1 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Manchasol 2 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Helio Energy 1 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Helio Energy 2 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Solaben 1 (ES): 50MW,
BJA fl exible hoses + Pipe clamps
• Solaben 2 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Solaben 3 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Solaben 6 (ES): 50MW,
BJA fl exible hoses + Pipe clamps
• Lebrija (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Solarcor 1 (ES): 50MW,
BJA fl exible hoses + Pipe clamps
• Solarcor 2 (ES): 50MW,
BJA fl exible hoses + Pipe clamps
• Borges Thermosolar (ES): 22,5MW,
Ball Joints: MPS + Alu cladding +
Pipe clamps
• Enerstar Villema (ES): 50MW,
Ball Joints: MPS + Alu cladding +
Pipe clamps
• Helios 1 (ES) :50MW,
Flexible ball joint jackets
• Helios 2 (ES): 50MW,
Flexible ball joint jackets
• La Africana (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Astexol 2 (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Arenales (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Guzman (ES): 50MW,
Ball Joints: MPS + Alu cladding
• Hassi R’Mel (AL): 50MW,
Flexible ball joint jackets
• Ain-Ben-Mathar (MA): 50MW,
Flexible ball joint jackets
• Solana (US): 280MW,
Pipe clamp insulation
• Mojave Solar (US): 280MW,
Pipe clamp insulation
• Genesis Solar 1 (US): 125MW,
Pipe clamp insulation
• Genesis Solar 2 (US): 125MW,
Pipe clamp insulation
Power tower plants
• Julich tower (DE): 1,5 MW,
Receiver, hot air lines & hot storage
vessel
• Gemasolar (ES): 50 MW,
Receiver + piping, outside heat shield
• PS 10 (ES): 11 MW,
Outside & inside heat shield
• PS 20 (ES): 11 MW,
Outside & inside heat shield
• CRS (ES): 4,6 MW,
Outside heat shield
• Tonopah (US):100 MW,
Outside heat shield
• Aora (IR): 100 kW,
Target heat shield
OUR WORLDWIDE CONTACTS
Promat International N.V.
Bormstraat 24
B-2830 Tisselt
Tel.: +32 (0)15 71 21 86
Fax: +32 (0)15 71 26 90
E-mail: [email protected]
URL: www.promat.be
Promat GmbH
Scheifenkamp 16
40878 Ratingen
Germany
Tel.: +49-2102 493 0
Fax: +49-2102 493 115
E-mail: [email protected]
URL: www.promat.de
Promat s.r.o.
Ckalova 22/784
16000 Praha 6 - Bubenec
Czech Republic
Tel.: +420-2 2439 0811
Fax: +420-2 3333 3576
E-mail: [email protected]
URL: www.promatpraha.cz
Promat TOP Sp. z.o.o.
ul.Prezclawska 8
03-879 Warszawa
Poland
Tel.: +48-22 212 2280
Fax: +48-22 212 2290
E-mail: [email protected]
URL: www.promattop.pl
Promat Iberica S.A.
C/Velázquez, 47, 6 Izquiedra
28001 Madrid
Tel.: +34 91 781 15 50
Fax: +34 91 575 15 97
E-mail: [email protected]
URL: www.promat.es
Promat UK Ltd.
The Sterling Centre
Eastern Road, Bracknell
RG12 2TD Bershire
UK
Tel.: +44-1344 381 300
Fax: +44-1344 381 301
E-mail: [email protected]
URL: www.promat.co.uk
PROMAT S.p.A.
Divisione HPI
Via Idiomi 1/9
I-20090 ASSAGO (M)
Italy
Tel.: +39-02 4571711
Fax: +39-02 45706187
E-mail: [email protected]
URL: www.promat.it
Promat S.A.S.
BP 66 - Rue de l’Amandier
F - 78540 Vernouillet
France
Tél.: +33 1 39 79 61 60
Fax: +33 1 39 71 16 60
E-mail: [email protected]
URL: www.promat.fr
Microtherm Inc.
3269 Regal Drive
Alcoa, Tennessee 37701
U.S.A.
Tel.: (+1) (865) 681 0155
Fax: (+1) (865) 681 0016
E-mail: [email protected]
URL: www.microthermgroup.com
Promat Australia Pty. Ltd.
1 Scotland Road
SA 5031 Mile End South, Adelaide
Tel.: +61 (8) 8352 6759
Fax: +61 (8) 8352 1014
E-mail: [email protected]
URL: www.promat-ap.com
Promat International (Asia Pacific) Ltd.
Unit 19-02-01, Level 2 PNB
Damansara No. 19 Lorong
Dungun Damansara Heights
50490 Kuala Lumpur
Tel.: +60-3 2095 5111
Fax: +60-3 2095 6111
E-mail: [email protected]
URL: www.promat-ap.com
Promat Middle East
Suite 1805, 18th Floor
Dubai Festival City Tower
PO Box 123945, Dubai
United Arab Emirates
Tel.: +971 4 232 9780
Fax: +971 4 232 9781
E-mail: [email protected]
URL: www.promatfp.ae
Promat India Ltd.
610-611, Ansal Imperial Tower
C-Block, Community Centre
Naraina Vihar, Naraina
110028 New Delhi
Tel.: +91 (11) 2577 8413
Fax: +91 (11) 2577 8414
E-mail: [email protected]
URL: www.promat-ap.com
Promat China Ltd.
Room 1507, Building 5
SOHO Xiandaicheng
No.88 Jianguo Road
Chaoyang District
100022 Beijing
P.R. CHINA
Tel.: +86 (10) 8589 1254
Fax: +86 (10) 8589 2904
E-mail: [email protected]
URL: www.promat.com.cn
Nippon Microtherm Co.,Ltd.
Pacifi c Marks Shinjuku Bldg, 4-15-7
Nishi-shinjuku, Shinjuku-ku
Tokyo 160-0023
Japan
Tel.: +81 333 772 821
Fax: +81 333 782 821
E-mail: [email protected]
URL: www.microthermgroup.com