Promac Catalouge

Spares, Tools& Consumablesc ata l o g u e

Promac, where good just got better

19602 - Promac Catalogue 2013.indd 1 31/01/2013 11:07

The Promac business mission is to provide proven, long term solutions, expertise, quality and service that exceeds customer expectations



prices subject to changeW W W . P R O M A C . C O . U K

W W W . P R O M A C . C O . U K

Spares L ine - 01788 538999 I re land - 021 4377125

Spares L ine - 01788 538999 I re land - 021 4377125 prices subject to changeS e

01

Contents 1Spares, Consumables and Service Introduction 2Headquarters Contacts 3Service Contracts 4Machinery Rentals 5Air Drills/Straight Drill 6Jobber Drills 7SDS Drill Bits 8Screwdrivers/Screwdriver Bits 9Die Grinders/Dentist Drill Bits 10Sisal Polisher/Air Router Body 11Sanders/Sanding Discs/Sanding Paper 12 - 13Impact Wrench/Air Riveter/Air Vacuum 14Airline/Blow Guns/PCL Fittings 15Air Fittings 16 - 17Lubricants 18 - 19Router Cutters 20 - 23Groove Knives 24 - 25Saw Blades 26 - 27Handsaws 28 - 29Knives / Sprue Guide 30 - 32Chisels 33Gasket Shears 34 - 35Pliers 36Hammers 37Quick Grip Clamps 38Kiplock Handles/Allen Keys 39Konig Pens/Repair Kit 40Safety Products/Gloves/Glasses/Ear Protection 41 - 49Windbags 50Printer Labels 51Work Bench Glide Strip/Brush Strip/Steel Backing 52PTFE Fabric 53Measuring Equipment 54 - 55Bench Mounted Saws 56 - 59BJM Cutting Centre / Recommended Spares 60 - 61Rapid Cutting Centre / Recommended Spares 62 - 63AKS 1805/AKS 1810 / Recommended Spares 64 - 65Urban SV530 / Recommended Spares 66 - 67Someco Welder / Recommended Spares 68 - 69Tecno Prima Welder / Recommended Spares 70 - 71STB / Recommended Spares 72 - 73Pertici 332P / Recommended Spares 74Pertici 500 / Recommended Spares 75Pertici Copy Router / ML Drainage Routers/ Recommended Spares 76Pertici VC721/BS771 / Recommended Spares 77Italmac / Recommended Spares 78 - 79Glass Consumables 80 - 83MTL - Cutting Table / Recommended Spares 84Forel - Vertical Washing Machine / Recommended Spares 85Forel - Super Spacer/Coupling Press / Recommended Spares 86 - 87Forel - Sealing Robot/PBN Automatic Spacer Bar Bender/Recommended Spares 88 - 89Idrotecnica IDRO Unit/Recommended Spares 90 - 91Promtional Codes 92 - 93Conditions Of Sales 94 - 95Index 96

Contents






02

Promac Spares, Consumables & Service Division have been supplying and servicing the Window Industry for over 30 years and during that period have grown to be probably the leading supplier for spares and consumables in the UK today.

At Promac we have a dedicated team of experienced sales and technical personnel based at our Rugby Head Office who concentrate on consumables, spares and service to deal with any issues that may arise.In addition, we also have an ‘Out of Hours Hotline’ for those unforeseen emergencies as your business is our priority.

With a product range of over 10,000 items now available from our Rugby warehouse we are confident that we can cater for all your needs quickly and efficiently.

We believe this catalogue is our best to date, not only showing a wide range of consumable products but also providing you with a ‘recommended spares’ section for your machinery to assist you in speedier recognition of the parts you require.

Our wide range of consumables and spares covers all market sectors, namely, PVC-u, Aluminium and Glass.

Don’t forget to take full advantage of our superb promotional offers within the catalogue designed to save you money on the products and services Promac offer. Please speak to one of our Service & Spares advisors for more details.

If you do not see what you need in this catalogue, please ring one of our Service & Spares team at our Rugby Head Office and they will be happy to advise you on the quickest solution to your problem.

SPARES, CONSUMABLES & SERVICE


Hea

dquar

ters

con

tact

s


Main ReceptionTel: 01788 577 577 Fax: 01788 567 938

Spares Department:Direct Spares Tel: 01788 538 999Direct Spares Fax: 01788 538 969

Service DepartmentDirect Service Tel: 01788 577 887Direct Service Fax: 01788 538 969

The number detailed below is constantly monitored by one of our spares and service advisors. Your enquiry is important to us so please leave a brief message with your contact and company details and we will process your requirement as a priority.

OUT OF HOURS HOTLINE+44 (0) 7968 964 844

E-mailFor machinery enquiries contact [email protected] hand tools, consumables or spare parts contact [email protected] technical support [email protected]

Web: www.promac.co.uk

UK Delivery Charges Apply(unless otherwise stated)

Maximum weight per package 20kgsPlease contact us directly for urgent, weekend or overseas delivery costs.



At Promac we understand that profitable and efficient manufacturing relies on serviceable machinery. For as little as £100 per month our service contracts include planned maintenance, calibration and diagnostics as well as telephone support, discounted spares and consumables, with a hotline.

The Service and Spares advisors are committed to delivering the very best levels of customer service even if the enquiry is out of hours.

OUT OF HOURS HOTLINE +44 (0) 7968 964 844

We know that proactive maintenance saves time and money protecting your investment and the machinery asset.

Call now and ask for a free survey that will assess your requirement today.

Machinery downtime costing you a fortune?

Serv

ice

contr

acts



mac

hine

ryr

enta

l Think you can’t afford quality equipment? Think Again.

Flexibility is at the heart of our business so if capex is tight and production is still a nightmare, Promac now offers fixed term rental schemes on a wide range of glass, PVC and aluminium machinery.

The low entry cost and tax efficient way to achieve increased productivity, speed, accuracy and reliability offers minimal impact on financial gearing – and is supported by Promac’s comprehensive service and breakdown cover.






06

Specification:- Air pressure (psi) 90- Air consumption (cfm) 4- Air inlet (npt) 1/4” - Weight (kgs) 0.89

Specification:- Free speed (rpm) 4500- Collet size 3/8”- Air pressure (psi)90- Air inlet (npt) 1/4”- Weight (kgs) 0.91- Air consumption (cfm) 4

Air Drills

Straight Drill

Part No. Description From £

70-0002 GP-0659-B Reversible Drill 3/8" - 1,800rpm £41.75

70-0003 GP-0657-B Reversible Drill 1/2" - 800rpm £44.70

70-0013 GP-0659KC Reversible Keyless Chuck Drill 3/8" - 1,800rpm £42.50

71-0453 1/2" Chuck & Key £12.00

71-0452 3/8" Chuck & Key £10.00

71-0398 1/2" Keyless Chuck £12.00

71-0399 3/8" Keyless Chuck £7.50

All air tools must be oiled for warranty purposes.


70-0009 GP-0664-1 Straight Drill 3/8" - 4,500rpm £39.50







07

Jobber Drills

Supplied In Packs Of 10

Part No. Description From £ +5

80-0050 2mm x 24mm x 49mm £3.00 £2.85

80-0050 long 2mm x 55mm x 85mm £6.80 £6.45

80-0052 2.5mm x 30mm x 57mm £3.00 £2.85

80-0052 long 2.5mm x 60mm x 95mm £6.80 £6.45

80-0053 3mm x 33mm x 61mm £3.00 £2.85

80-0053 long 3mm x 67mm x 100mm £7.80 £7.40

80-0051 3.5mm x 30mm x 70mm £3.70 £3.50

80-0054 4mm x 43mm x 75mm £3.50 £3.30

80-0054 long 4mm x 80mm x 120mm £10.20 £9.70

80-0055 4.5mm x 47mm x 80mm £4.70 £4.45

80-0055 long 4.5mm x 80mm x 125mm £11.30 £10.75

80-0056 5mm x 52mm x 86mm £4.70 £4.45

80-0056 long 5mm x 88mm x 132mm £12.00 £11.40

80-0075 5.3mm x 47mm x 85mm £7.00 £6.65

80-0060 6mm x 57mm x 93mm £8.80 £8.35

80-0060 long 6mm x 90mm x 140mm £14.80 £14.05

80-0063 7mm x 64mm x 109mm £8.80 £8.35

80-0064 7.5mm x 69mm x 109mm £10.80 £10.25

80-0072 8mm x 75mm x 117mm £11.20 £10.65

Supplied Singular

Part No. Ømm From £ +580-0078 10mm x 85mm x 130mm £1.70 £1.60






08

Part No. Description Each £ +10

76-3000 6mm x 210mm SDS Drill £1.95 £1.85

76-3001 6.5mm x 210mm SDS Drill £2.10 £2.00

76-3002 7mm x 210mm SDS Drill £2.20 £2.10

76-3003 8mm x 210mm SDS Drill £2.20 £2.10

76-3004 10mm x 210mm SDS Drill £2.35 £2.20

76-3005 12mm x 210mm SDS Drill £2.90 £2.75

76-3006 14mm x 210mm SDS Drill £3.85 £3.65

76-3007 15mm x 210mm SDS Drill £4.30 £4.10

76-3008 16mm x 210mm SDS Drill £4.80 £4.55


76-3500 6mm x 260mm SDS Drill £2.90 £2.75

76-3501 6.5mm x 260mm SDS Drill £2.75 £2.60

76-3502 8mm x 260mm SDS Drill £2.65 £2.50

76-3503 10mm x 260mm SDS Drill £3.25 £3.10

76-3504 12mm x 260mm SDS Drill £3.70 £3.50

76-3505 14mm x 260mm SDS Drill £4.65 £4.40

76-3506 15mm x 260mm SDS Drill £5.40 £5.15

76-3507 16mm x 260mm SDS Drill £5.90 £5.60


76-4000 8mm x 310mm SDS Drill £4.50 £4.25

76-4001 10mm x 310mm SDS Drill £3.60 £3.40

76-4002 14mm x 310mm SDS Drill £4.70 £4.45

76-4003 16mm x 310mm SDS Drill £6.05 £5.75

SDS Drills 210mm Long








09

Specification:- Free speed (rpm) 1,800- Air pressure (psi) 90- Air consumption (cfm) 4- Air inlet (npt) 1/4”- Hose size 3/8”


70-0100 GP-0907-B - Reversible Screwdriver (Medium Torque) - 1,800rpm £51.50

70-0101 GP-0908-B - Reversible Screwdriver - 800rpm £59.95



81-0001 Phillips PH2 - 25mm Long £0.60 £0.55

81-0001A Phillips PH2 - 25mm Long (Hard Tipped) £0.95 £0.90



81-0004 Pozidrive No 2 - 25mm Long £0.70 £0.65

81-0005 Pozidrive No 2 - 50mm Long £0.85 £0.80

81-0006 Magnetic Tip Holder £3.50 £3.30

57-0999 Urban Pozidrive No 2 - 152mm Long (DS2100 + AMS6010) £16.25 £15.40

57-1000 Urban Phillips PH2 - 152mm Long (DS2100 + AMS6010) £14.15 £13.45

58-0502 Powasert ADS-SE1 Screwdriver Shaft 175mm Long (M5 Thread) £27.55 £26.15

81-0007 Powersert PH2 Tips (SD 1342-2) M5 Thread £3.90 £3.70

58-ADS1469RD Powasert ADS-SE1 Screwdriver Shaft 175mm Long (10-32 UNF Thread) £36.50 £34.65

58-ADS251 Powersert PH2 Tips (SD 1342-2) 10-32 UNF Thread £5.50 £5.20

Screwdrivers

Screwdriver Bits






10

Specification:- Free speed (rpm) 20,000 - 25,000 - Collet size (mm) 3 & 6- Air pressure (psi) 90

- Air consumption 5 - Air inlet (npt) 1/4”- Weight (kgs) 0.57

Specification:- Free speed (rpm) 60,000 - Air pressure (psi) 90 - Air inlet (npt) 1/4”- Weight (kgs) 0.30

- Accessories: Wrench/ PC Pin- Collet size (mm) 3- Air consumption (cfm) 2.83 - Hose size 3/8”


70-0006 GP-0509W3 Angled Die Grinder (With 3mm Collet) - 20,000rpm £35.75

70-0014 GP-507W3 Mini Die Grinder (With 3mm Collet) - 25,000rpm £27.50

70-0004 GP-0511DW- Die Grinder 20,000rpm (with 6mm & 3mm Collet) £22.75

71-0301 P051124-3 - Die Grinder Collet 3mm £6.00

71-0301A P051124-6 - Die Grinder Collet 6mm £6.00

71-0302 P051124-8 - Die Grinder Collet 8mm £10.00


70-0005 GP-0571H3 Dentist Drill - 60,000rpm (with 3mm Collet) £39.95


Die Grinders

Dentist Drill

70-0014

70-0006


80-0001 3mm Straight Burr (3mm Shank) £4.35 £4.15

80-0002 3mm Tree Burr (3mm Shank) £4.15 £3.95

80-0003 3mm Ball Nose Burr (3mm Shank) £4.35 £4.15

80-0004 3mm Ball End Burr (3mm Shank) £4.35 £4.15

80-0005 4mm Ball End Burr (3mm Shank) £6.00 £5.70



80-0010 6mm Straight Burr (6mm Shank) £10.50 £9.95

80-0011 6mm Tree Burr (3mm Shank) £10.00 £9.50

80-0001 80-0002 80-0003 80-0004 80-0005

Dentist Drill Burrs






11

Specification:- Free speed (rpm) 4,500- Air pressure (psi) 90- Air consumption (cfm) 4

- Air inlet 1/4”- Hose size 3/8”

Specification:- Free speed (rpm) 11000 - Air pressure (psi) 90- Air consumption (cfm) 6 - Hose size 3/8”


70-0400 GP-0664-1 Sisal Polisher Complete With Mop - 4,500rpm £67.00

70-0401 GP-0664-1 Sisal Polisher Body Only - 4,500rpm & Adaptor £50.50



70-0300 G-0519-1 Air Router Body Heavy Duty - 11,000 rpm £72.50

70-0304 Complete Router Seam Shoe For 70-0300 £46.00

70-0306 Complete Drainage Slot Shoe For 70-0300 £46.00

70-0307 Aluminum Collar For 70-0304 + 70-0306 £30.00



70-0404 Sisal Mop Head M8 Male £16.95 £16.10

70-0405 Sisal Mop Head 3/8bsp Female £19.50 £18.50

71-0100 Sisal Mop Adaptor 3/8bsp Female To M8 Female £7.50 £7.13

Sisal Polisher

Air Router Body

Router Shoes

Sisal Mops

70-0304

70-0306






12

Specification:- Free Size (rpm) 10,000 - Pad Size 6” - Air pressure (psi) 90- Air consumption (cfm) 4- Air inlet 1/4”- Hose size 3/8”


70-0204 GP-0418-6 Orbital Palm Sander 6" - 10,000rpm £72.50

70-0209 G-116R6A Velco Sanding Pad M8 (Yellow) £8.50

70-0206 G-110H6 S/A Sanding Pad M8 (Yellow) £4.50


Palm Sander

Specification:- Free speed (rpm) 10,000 - Diameter 6”- Air pressure (psi) 90

- Air consumption (cfm) 4- Air inlet 1/4”- Hose size 3/8”

Specification:- Free speed (rpm) 8,000- Paper Size 3-2/3”x9” - Air pressure (psi) 90

- Air consumption (cfm) 4 - Air inlet 1/4” - Hose size 3/8”


70-0200 GP-0420 Dual Action Sander 6" - 10,000rpm £35.95

70-0202 G116 S/A Sanding Pad M8 (Black) £7.95



70-0201 GP-0416S Jitterbug Sander - 8,000rpm £41.50

70-0201A P0416S43 Spare Sanding Pad (Foam) £9.95


Dual Action Sander

Jitterbug Sander






13

Part No. Description Each £ +1082-0001 Hermes Sanding Discs 6” 120 Grit £17.20 £16.3582-0002 Hermes Sanding Discs 6” 180 Grit £17.20 £16.3582-0003 Hermes Sanding Discs 6” 240 Grit £17.20 £16.3582-0004 Hermes Sanding Discs 6” 320 Grit £17.20 £16.3582-0005 Hermes Sanding Discs 6” 400 Grit £17.20 £16.3582-0006 Hermes Sanding Discs 6” 500 Grit £17.20 £16.3582-0001I Indasa Sanding Discs 6” 120 Grit £17.20 £16.3582-0002I Indasa Sanding Discs 6” 180 Grit £17.20 £16.3582-0003I Indasa Sanding Discs 6” 240 Grit £17.20 £16.3582-0004I Indasa Sanding Discs 6” 320 Grit £17.20 £16.3582-0005I Indasa Sanding Discs 6” 400 Grit £17.20 £16.3582-0006I Indasa Sanding Discs 6” 500 Grit £17.20 £16.35

Velcro (100 Per Box)

Velcro (50 Per Box)

Part No. Description Each £ +582-0100 Hermes Sanding Paper 180 Grit £31.25 £29.6582-0101 Hermes Sanding Paper 240 Grit £31.25 £29.6582-0102 Hermes Sanding Paper 320 Grit £31.25 £29.6582-0103 Hermes Sanding Paper 400 Grit £31.25 £29.6582-0100I Indasa Sanding Paper 180 Grit £32.75 £31.0082-0101I Indasa Sanding Paper 240 Grit £32.75 £31.0082-0102I Indasa Sanding Paper 320 Grit £32.75 £31.0082-0103I Indasa Sanding Paper 400 Grit £32.75 £31.0082-0104I Indasa Sanding Paper 500 Grit £32.75 £31.00

Sanding DiscsSelf Adhesive (100 per box)

Sanding Paper(50mtr Per Roll)

Part No. Description Each £ +1082-0303 Hermes Sanding Discs 6” 120 Grit £26.35 £25.0082-0300 Hermes Sanding Discs 6” 180 Grit £26.35 £25.0082-0304 Hermes Sanding Discs 6” 240 Grit £26.35 £25.0082-0301 Hermes Sanding Discs 6” 320 Grit £26.35 £25.0082-0302 Hermes Sanding Discs 6” 400 Grit £26.35 £25.0082-0305 Hermes Sanding Discs 6” 500 Grit £26.35 £25.00

Part No. Description Each £ +1082-0303I Indasa Sanding Discs 6” 120 Grit £15.35 £14.5582-0300I Indasa Sanding Discs 6” 180 Grit £15.35 £14.5582-0304I Indasa Sanding Discs 6” 240 Grit £15.35 £14.5582-0301I Indasa Sanding Discs 6” 320 Grit £15.35 £14.5582-0302I Indasa Sanding Discs 6” 400 Grit £15.35 £14.5582-0305I Indasa Sanding Discs 6” 500 Grit £15.35 £14.55






14

Specification:- Capacity bolt size 5/8” - Speed 7,000 Rpm- Ave Torque 230 Ft/Lbs

- Air Pressure 90 (PSI)- Weight 2.39 (KGS) - Noise Level 96 dBA- Vibration level 11.6 m/s2

Specification:- Air pressure (psi) 90- Air consumption (cfm) 4

- Air inlet bsp 1/4”- Hose size 3/8”


70-GP-0704PS GP-0704PS3 Impact Wrench Kit 1/2" - 7,000rpm £49.95


70-GP0810HL GP-0810N3 Air Pop Riveter 3/16” Capacity £34.95



70-GP-1222K GP-1222K Air Vacuum £24.75


Impact Wrench

Riveter

Air Vacuum






15

Part No. Description Each £ +10 99-0100 PCL Quick Coupler 1/4bsp Male £4.95 £4.7099-0101 PCL Quick Coupler 1/4bsp Female £4.95 £4.7099-0102 PCL Adaptor To 1/4bsp Male £1.10 £1.0599-0103 PCL Adaptor To 1/4bsp Female £1.10 £1.0599-0104 PCL Adaptor To 3/8bsp Hose £1.10 £1.0570-0501 G-0301-2 - 1/4"bsp Inline Mini Oiler £2.50 £2.3578-0200 PTFE Tape 12mm Wide 12mtr Long £0.50 £0.45

Airline Accessories

PTFE Tape

69-GP-1066-10

99-0200 99-0201 99-0202 99-0203

69-001569-0015A

69-0008

Blow Guns

Part No. Description Each £ +10 69-0008 GP-1063 Blow Gun With Safety Side Outlet Holes £1.70 £1.6069-0015A GP-1064 Air Duster (Metal) £2.25 £2.1569-0015 GP-1066 Blow Gun (Plastic Handle) £2.95 £2.8069-GP-1066-10 GP-1066-10 Blow Gun 10" Long £4.50 £4.25

Quick Release Fittings

Part No. Description Each £ +10 86-0100 G-365GB Recoil Hose 8mm O/D x 1/4bsp x 7.5mtr Long £9.00 £8.5586-0101 G-365GB2 Recoil Hose 8mm O/D x 1/4bsp x 15mtr Long £12.00 £11.4086-0102 G-367GB Recoil Hose 10mm O/D x 1/4bsp x 7.5mtr Long £12.00 £11.4086-0103 G-367GB2 Recoil Hose 10mm O/D x 1/4bsp x 15mtr Long £15.50 £14.7086-0010 Recoil Hose For Blow Guns 6mm O/D £2.50 £2.3586-0104 3/8" Nylon Braided Hose (Per Mtr) £0.85 £0.8086-0105 1/2" Nylon Braided Hose (Per Mtr) £1.00 £0.9586-0106 4mm O/D - 2.5mm I/D Air Line (Per Mtr) £0.55 £0.5086-0107 5mm O/D - 3mm I/D Air Line (Per Mtr) £0.65 £0.6086-0108 6mm O/D - 4mm I/D Air Line (Per Mtr) £0.79 £0.7586-0109 8mm O/D - 6mm I/D Air Line (Per Mtr) £1.00 £0.9586-0110 10mm O/D - 8mm I/D Air Line (Per Mtr) £2.00 £1.9086-0152 MOO Jubilee Clip 13mm to 20mm £0.45 £0.40






16

Air FittingsPart No. Description99-0420 PUL 0400 - 4mm EQUAL ELBOW99-0620 PUL 0600 - 6mm EQUAL ELBOW99-0820 PUL 0800 - 8mm EQUAL ELBOW99-1020 PUL 1000 - 10mm EQUAL ELBOW99-1220 PUL 1200 - 12mm EQUAL ELBOW

99-0430 PUT 0400 - 4mm EQUAL TEE99-0630 PUT 0600 - 6mm EQUAL TEE99-0830 PUT 0800 - 8mm EQUAL TEE99-1030 PUT 1000 - 10mm EQUAL TEE99-1230 PUT 1200 - 12mm EQUAL TEE

99-0670 PGJ 06 - 04 - 6mm - 4mm STEM REDUCER99-0870 PGJ 06 - 04 - 6mm - 4mm STEM REDUCER99-0871 PGJ 08 - 06 - 8mm - 6mm STEM REDUCER99-1070 PGJ 10 - 08 - 10mm - 8mm STEM REDUCER99-1270 PGJ 12 - 10 - 12mm - 10mm STEM REDUCER

99-0431 PY 0400 - 4mm Y FITTING99-0631 PY 0600 - 6mm Y FITTING99-0831 PY 0800 - 8mm Y FITTING99-1031 PY 1000 - 10mm Y FITTING99-1231 PY 1200 - 12mm Y FITTING

99-0440 PUC 0400 - 4mm STRAIGHT CONNECTOR99-0640 PUC 0600 - 6mm STRAIGHT CONNECTOR99-0840 PUC 0800 - 8mm STRAIGHT CONNECTOR99-1040 PUC 1000 - 10mm STRAIGHT CONNECTOR99-1240 PUC 1200 - 12mm STRAIGHT CONNECTOR

99-0000 1/8 - 1/8 BARREL99-0001 1/4 - 3/8 BARREL99-0002 3/8 - 3/8 BARREL99-0003 1/8 - 1/4 BARREL99-0004 3/8 - 1/2 BARREL99-0005 1/8 - 3/8 BARREL99-0006 1/4 - 1/2 BARREL99-0007 1/4 - 1/4 BARREL99-0008 1/2 - 1/2 BARREL

99-0010 1/8 - 1/8 NIPPLE99-0011 1/8 - 1/4 NIPPLE99-0012 1/4 - 1/4 NIPPLE99-0013 1/4 - 3/8 NIPPLE99-0014 1/4 - 1/2 NIPPLE99-0015 3/8 - 3/8 NIPPLE99-0016 3/8 - 1/2 NIPPLE99-0017 1/2 - 1/2 NIPPLE99-0018 1/2 - 3/4 NIPPLE99-0019 3/4 - 3/4 NIPPLE

99-0020 1/4 MALE TO 1/8 - FEMALE REDUCER99-0021 3/8 MALE TO 1/4 - FEMALE REDUCER99-0022 1/2 MALE TO 1/4 - FEMALE REDUCER99-0023 1/2 MALE TO 3/8 - FEMALE REDUCER99-0024 3/4 MALE TO 1/2 - FEMALE REDUCER

99-0030 1/8 - 1/8 MALE - FEMALE EXPANDER99-0031 1/8 - 1/4 MALE - FEMALE EXPANDER99-0032 1/4 - 1/4 MALE - FEMALE EXPANDER99-0033 1/4 - 3/8 MALE - FEMALE EXPANDER99-0034 3/8 - 3/8 MALE - FEMALE EXPANDER99-0035 3/8 - 1/2 MALE - FEMALE EXPANDER99-0036 1/2 - 1/2 MALE - FEMALE EXPANDER

99-0050 1/8 SILENCER99-0051 1/4 SILENCER






17

Air FittingsPart No. Description99-0400 POC 04-M5C - 4mm x M5 MALE STUD99-0401 PC 04-01 - 4mm x 1/8bsp MALE STUD99-0402 PC 04-02 - 4mm x 1/4bsp MALE STUD99-0601 PC 06-01 - 6mm x 1/8bsp MALE STUD99-0602 PC 06-02 - 6mm x 1/4bsp MALE STUD99-0603 PC 06-03 - 6mm x 3/8bsp MALE STUD99-0801 PC 08-01 - 8mm x 1/8bsp MALE STUD99-0802 PC 08-02 - 8mm x 1/4bsp MALE STUD99-0803 PC 08-03 - 8mm x 3/8bsp MALE STUD99-0804 PC 08-04 - 8mm x 1/2bsp MALE STUD99-1001 PC 10-01 - 10mm x 1/8bsp MALE STUD99-1002 PC 10-02 - 10mm x 1/4bsp MALE STUD99-1003 PC 10-03 - 10mm x 3/8bsp MALE STUD99-1004 PC 10-04 - 10mm x 1/2bsp MALE STUD

99-0472 06--04--M5 - 4mm - M5 STEM ADAPTOR99-0473 06--04--18 - 4mm - 1/8 STEM ADAPTOR99-0474 06--04--14 - 4mm - 1/4 STEM ADAPTOR99-0572 06--05--M5 - 5mm - M5 STEM ADAPTOR99-0573 06--05--18 - 5mm - 1/8 STEM ADAPTOR99-0574 06--05--14 - 5mm - 1/4 STEM ADAPTOR99-0672 06--06--M5 - 6mm - M5 STEM ADAPTOR99-0673 06--06--18 - 6mm - 1/8 STEM ADAPTOR99-0873 06--08--18 - 8mm - 1/8 STEM ADAPTOR99-0874 06--08--14 - 8mm - 1/4 STEM ADAPTOR99-0875 06--08--38 - 8mm - 3/8 STEM ADAPTOR99-1073 06--10--18 - 10mm - 1/8 STEM ADAPTOR99-1074 06--10--14 - 10mm - 1/4 STEM ADAPTOR99-1075 06--10--38 - 10mm - 3/8 STEM ADAPTOR

99-0410 PL 04-M5C - 4mm x M5bsp SWIVEL ELBOW99-0411 PL 04-01 - 4mm x 1/8bsp SWIVEL ELBOW99-0412 PL 04-02 - 4mm x 1/4bsp SWIVEL ELBOW

99-0611 PL 06-01 - 6mm x 1/8bsp SWIVEL ELBOW99-0612 PL 06-02 - 6mm x 1/4bsp SWIVEL ELBOW99-0613 PL 06-03 - 6mm x 3/8bsp SWIVEL ELBOW

99-0811 PL 08-01 - 8mm x 1/8bsp SWIVEL ELBOW99-0812 PL 08-02 - 8mm x 1/4bsp SWIVEL ELBOW99-0813 PL 08-03 - 8mm x 3/8bsp SWIVEL ELBOW99-0814 PL 08-04 - 8mm x 1/2bsp SWIVEL ELBOW

99-1011 PL 10-01 - 10mm x 1/8bsp SWIVEL ELBOW99-1012 PL 10-02 - 10mm x 1/4bsp SWIVEL ELBOW99-1013 PL 10-03 - 10mm x 3/8bsp SWIVEL ELBOW99-1014 PL 10-04 - 10mm x 1/2bsp SWIVEL ELBOW

99-0450 NSE 04-M5-0 - 4mm x M5-1 BANJO FLOW CONTROL VALVE (IN)99-0451 NSE 04-01-0 - 4mm x 1/8bsp BANJO FLOW CONTROL VALVE (IN)99-0452 NSE 04-02-0 - 4mm x 1/4bsp BANJO FLOW CONTROL VALVE (IN)99-0651 NSE 06-01-0 - 6mm x 1/8bsp BANJO FLOW CONTROL VALVE (IN)99-0652 NSE 06-02-0 - 6mm x 1/4bsp BANJO FLOW CONTROL VALVE (IN)99-0653

99-0851 NSE 08-01-0 - 8mm x 1/8bsp BANJO FLOW CONTROL VALVE (IN)99-0852 NSE 08-02-0 - 8mm x 1/4bsp BANJO FLOW CONTROL VALVE (IN)99-0853 NSE 08-03-0 - 8mm x 3/8bsp BANJO FLOW CONTROL VALVE (IN)99-0854 NSE 08-04-0 - 8mm x 1/2bsp BANJO FLOW CONTROL VALVE (IN)

99-1052 NSE 10-02-0 - 10mm x 1/4bsp BANJO FLOW CONTROL VALVE (IN)99-1053 NSE 10-03-0 - 10mm x 3/8bsp BANJO FLOW CONTROL VALVE (IN)99-1054 NSE 10-04-0 - 10mm x 1/2bsp BANJO FLOW CONTROL VALVE (IN)

99-1253 NSE 12-03-0 - 12mm x 3/8bsp BANJO FLOW CONTROL VALVE (IN)99-1254 NSE 12-04-0 - 12mm x 1/2bsp BANJO FLOW CONTROL VALVE (IN)






18


79-0010 Fuchs Silkolene Silkair VG22 £5.15 £4.90

General purpose airline oil specially formulated to lubricate downstream pneumatic airline equipment (1 litre)

79-0011 Fuchs Silkolene Silkair VG22 £21.55 £20.45

General purpose airline oil specially formulated to lubricate downstream pneumatic airline equipment (5 litres)

Lubricants

79-0010


58-7882 HSS 2000 Spray Grease - 500ml Aerosol £22.25 £21.15

79-0007 Fuchs Renolit White Grease Spray - 500ml Aerosol £8.95 £8.50

HSS200 equivalent. Grease spray leaves behind an adhesive waterproof lubricant that prevents seizing and is non fling off

79-0001 Fuchs Silicone Spray - 500ml Aerosol £10.45 £9.95

Silicone lubricant & release agent based on a medium viscosity silicone fluid. Dries quickly to leave a colourless, low friction film. May be used where a non-staining lubricant film is needed such as door hinges, screwing machines, tables etc.

79-0002 Fuchs Gear Lube - 500ml Aerosol £11.50 £10.95

Is designed for applications to open gears that mesh precisely. Its highly adhesive characteristics are designed to reduce or eliminate throw-offs in use

79-0003 Fuchs Silkopen - 500ml Aerosol £12.15 £11.55

Produces a jet spray of penetrating fluid for affective, quick release of seized and corroded metal parts. Suitable of use on fasteners, studs, couplings etc.

79-0004 Fuchs DWF 23 Pure Anti Corrosion Coating - 500ml Aerosal £9.00 £8.55

Solvent based rust preventative & dewatering oil. (WD40 EQUIVALENT)

79-0006 Fuchs Chain Lube - 500ml AerosolDesigned to lubricate all chains, lift and drive chains, or conveyor chains

£6.95 £6.60






19

Lubricants

Lubricants

Detergents and Cleaners

21-000793-000593-0002 93-0003 93-0004

Part No. Description Each £ +593-0002 2360 - Black Cutting Oil (5Ltr) Emmegi Saws £22.50 £21.3593-0003 SP0724 - Fast Evaporating Clear Cutting Oil (5Ltr) Cutting Tables £55.50 £52.7093-0004 600662127 - Ecocool MB Cutting Oil (5Ltr) Steel Saws £18.95 £18.0093-0005 Rhenus Nor SSL Cutting Fluid (5Ltr) Emmegi CNC £26.29 £24.9536-25011 25011 - Alcut Plus Cutting Fluid (1Ltr) Pertici Machines £4.00 £3.8021-0007 AL10 - Ital Oil Cutting Fluid (5Ltr) Italmac Machines £80.95 £76.90

Part No. Description Each £ +579-0016 Fuchs - Renolit MP Plus 2 Multi Purpose Grease (500g Cartridge) £3.45 £3.2579-0017 Fuchs - Renolit FLM2 - Highly Water Resistant Grease (500g Cartridge) £3.85 £3.6579-0018 Fuchs - Renolit EP2 Multi Purpose Grease (400g Cartridge) £2.50 £2.3579-0019 Fuchs - Renolit LX EP2 High Temperature Grease (400g Cartridge) £3.50 £3.30

Part No. Description Each £ +575-0201 Solvent Citrus Based De-Greaser (1 Litre) Ideal For Heater Plates £9.95 £9.4575-0202 Solvent Citrus Based De-Greaser (5 Litre) Ideal For Heater Plates £35.00 £33.25

Part No. Description Each £ +547-1499A CX4/375AU - Centroplex (400g Cartridge) Emmegi Gearbox £30.15 £28.6547-1501A NBU15 - Kluber Isoflex (400g Cartridge) Emmegi CNC £22.50 £21.3511-12-0030-013 PD2 - Memolube Grease (g Cartridge) BJM £39.00 £37.0511-12-0030-013A PD2 - Castrol Long Time Grease (400g Cartridge) BJM £21.35 £20.25

Part No. Description Each £ +575-0001 Akawax For Saw Blades £7.00 £6.65






20


76-0300 3mm x 12mm x 60mm (8mm Shank) SINGLE SPIRAL £6.95 £6.60





76-0504 5mmx 14mm x 100mm (8mm Shank) SINGLE SPIRAL £7.20 £6.85






76-0523 5mm x 25mm x100mm (8mm Shank) SINGLE SPIRAL £8.85 £8.40



76-0607 6mm x 35mm x 80mm (8 Shank) SINGLE SPIRAL £8.25 £7.80




76-0807 8mm x 30mm x 120mm (8mm Shank) SINGLE SPIRAL - COATED £22.55 £21.40

76-0807A 8mm x 30mm x 120mm (8mm Shank) SINGLE SPIRAL £8.50 £8.05

76-0809 8mm x 30mm x 100mm (8mm Shank) SINGLE SPIRAL - COATED £22.45 £21.30










76-1201 12mm x14mm x 80mm (10mm Shank) SINGLE SPIRAL £9.60 £9.10


Router Cutters Single Spiral






21


76-0404A 5mm x 35mm x 100mm (8mm Shank) TWIN SPIRAL £9.70 £9.20

76-0506 5mm x 40mm x 100mm (8mm Shank) TWIN SPIRAL £9.40 £8.90

76-0806 8mm x 40 mm x 80mm (8mm Shank) TWIN SPIRAL £16.45 £15.60

76-0815 8mm x 50 mm x 80mm (8mm Shank) TWIN SPIRAL - COATED £22.75 £21.60

76-1005A 10mm x 40mm x 100mm (8mm Shank) TWIN SPIRAL £12.45 £11.80




76-0409 4mm x 40mm x 80mm (8mm Shank) TWIN STRAIGHT £8.30 £7.85







76-0806A 8mm x 40mm x 120mm (8mm Shank) TWIN STRAIGHT £10.70 £10.15


76-0813 8mm x 40mm x 120mm (8mm Shank) TWIN STRAIGHT - COATED £21.90 £20.80




76-0401 4mm x 16/45mm x 90mm (8mm Shank) SINGLE SPIRAL £7.40 £7.00

76-0411 4mm x 16/45xmm x 120mm (8mm Shank) SINGLE SPIRAL £9.70 £9.20








Router Cutters Twin Spiral

Router Cutters Twin Straight

Router Cutters with Relief






22

Part No. Description Each £ +10 76-0304 3mm x 12mm x 40mm (3mm Shank) SOLID CARBIDE £9.20 £8.75

76-0408 4mm x 15mm x 50mm (4mm Shank) SOLID CARBIDE £10.00 £9.50








76-0814 8mm x 30mm x 100mm (8mm Shank) SOLID CARBIDE (FACETED) £54.95 £52.20

76-0816 8mm x 35mm x 120mm (8mm Shank) SOLID CARBIDE (FACETED) £48.75 £46.30





Carbide Router Cutter

For BJM Machines

For Rapid Machines

Part No. Description 11-06-0007-021C 5mm x 30mm x 90mm (8mm Shank) SINGLE SPIRAL

11-06-0007-023C 3/5mm x 5mm x 35mm x 100mm (8mm Shank) SINGLE SPIRAL

11-06-0007-017C 8mm x 20mm x 100mm (10mm Shank) TWIN SPIRAL

11-06-0007-037C 8mm x 35mm x 100mm (10mm Shank) TWIN SPIRAL LH

11-06-0007-038C 8mm x 35mm x 100mm (10mm Shank) TWIN SPIRAL RH

Part No. Description 58-54500396 4mm x 20/35mm x 80mm (8mm Shank) SINGLE SPIRAL (RAPID)

58-54500396- C 4mm x 20/35mm x 80mm (8mm Shank) SINGLE SPIRAL

58-54500366 5mm x 40mm x 80mm (8mm Shank) TWIN SPIRAL (POINTED) (RAPID)

58-54500366-C 5mm x 40mm x 80mm (8mm Shank) TWIN SPIRAL (POINTED)

58-54500378 5mm x 20/35mm x 90mm (8mm Shank) SINGLE SPIRAL (RAPID)

58-54500378-C 5mm x 20/35mm x 90mm (8mm Shank) SINGLE SPIRAL

58-54500379 5mm x 35/55mm x 90mm (8mm Shank) SINGLE SPIRAL (RAPID)

58-54500386 5mm x 35/55mm x 90mm (8mm Shank) SINGLE SPIRAL (POINTED) (RAPID)

58-54500386-C 5mm x 35/55mm x 90mm (8mm Shank) SINGLE SPIRAL (POINTED)

58-54500395 5mm x 35mm x 90mm (8mm Shank) SINGLE SPIRAL (RAPID)

58-54500081 8mm x 40mm x 100mm (8mm Shank) TWIN SPIRAL (RAPID)

58-54500081-C 8mm x 40mm x 100mm (8mm Shank) TWIN SPIRAL

58-54500102 10mm x 50mm x 100mm (10mm Shank) TWIN SPIRAL (RAPID)

58-54500102-C 10mm x 50mm x 100mm (10mm Shank) TWIN SPIRAL

58-54500382 12mm x 40mm x 100 (10mm Shank) SINGLE SPIRAL (RAPID)

58-54500382-C 12mm x 40mm x 100 (10mm Shank) SINGLE SPIRAL

58-54500122 12mm x 40mm 100mm (10mm Shank) TWIN SPIRAL (RAPID)






23

Part No. Description Each £ +10 77-0400 Hand Router Cutter 4mm x 10mm x 35mm (M10 Thread) £3.95 £3.75

77-0401 Hand Router Cutter 4mm x 12mm x 52mm (M10 Thread) £18.15 £17.25











Part No. Description Each £ +5 80-0200 Espag Drill 8mm x 50mm LH (M10 Thread) £24.50 £23.25

80-0207 Espag Drill 8mm x 60mm RH (M10 Thread) £17.30 £16.45


80-0201P Espag Drill 10mm x 50mm RH (M10 Thread) PILOTED £33.75 £32.05

80-0202 Espag Drill 10mm x 50mm LH (M10 Thread) £21.55 £20.45

80-0202P Espag Drill 10mm x 50mm LH (M10 Thread) PILOTED £30.05 £28.55



80-0203P Espag Drill 12mm x 50mm RH (M10 Thread) PILOTED £33.65 £31.95


80-0204P Espag Drill 12mm x 50mm LH (M10 Thread) PILOTED £36.05 £34.25


Hand Miller Router Bits

Espag Threaded Drills for Triple Drill Gearboxes

M10 female thread for Suhner, Gatx, Rotox, Striffler hand routers






24

Urban Original Grooving Knives

Part No. Machine Type 3mm Groove Knives57-562078 Groove Knife 3mm x 0.5mm RH57-562079 Groove Knife 3mm x 0.5mm LH57-552679 Groove Knife 3mm x 0.5mm (2 Legs)57-562065 Groove Knife 3mm x 0.6mm RH57-562066 Groove Knife 3mm x 0.6mm LH57-562067 Groove Knife 3mm x 0.6mm (2 Legs)57-N002331 Groove Knife 3mm x 0.7mm RH57-N002332 Groove Knife 3mm x 0.7mm LH57-N002333 Groove Knife 3mm x 0.7mm (2 Legs)3.5mm Groove Knives57-562060 Groove Knife 3.5mm x 0.5mm RH 57-562061 Groove Knife 3.5mm x 0.5mm LH57-552694 Groove Knife 3.5mm x 0.5mm (2 Legs)57-562070 Groove Knife 3.5mm x 0.6mm RH 57-562071 Groove Knife 3.5mm x 0.6mm LH57-552676 Groove Knife 3.5mm x 0.6mm (2 Legs)57-552676A Groove Knife 3.5mm x 0.8mm RH 57-562070A Groove Knife 3.5mm x 0.8mm LH57-562071A Groove Knife 3.5mm x 0.8mm (2 Legs)4mm Groove Knives57-N012519 Groove Knife 4mm x 0.6mm RH57-N012520 Groove Knife 4mm x 0.6mm LH57-N012518 Groove Knife 4mm x 0.6mm (2 Legs)57-N012519A Groove Knife 4mm x 0.8mm RH57-N012520A Groove Knife 4mm x 0.8mm LH57-N012518A Groove Knife 4mm x 0.8mm (2 Legs)Woodgrain Groove Knives57-576718 Woodgrain Groove Knife 3.5mm x -0.1mm RH57-576719 Woodgrain Groove Knife 3.5mm x -0.1mm LH57-552748 Woodgrain Groove Knife 3.5mm x -0.1mm (2 Legs)57-562074 Woodgrain Groove Knife RH (Flat)57-562075 Woodgrain Groove Knife LH (Flat)57-552674 Woodgrain Groove Knife (2 Legs) (Flat)Teflon Coated Groove Knives & Flat Knives57-N004980 Groove Knife 3mm x 0.5mm RH57-N004979 Groove Knife 3mm x 0.5mm LH57-N011983 Groove Knife 3mm x 0.6mm RH57-N011984 Groove Knife 3mm x 0.6mm LH57-N006490 Groove Knife 3mm x 0.6mm (2 Legs)57-592221 Woodgrain Groove Knife 3.5mm x -0.1mm RH57-592222 Woodgrain Groove Knife 3.5mm x -0.1mm LH57-592552 Woodgrain Groove Knife 3.5mm x -0.1mm (2 Legs)






25

72-1045 72-050272-060072-080072-030072-070072-040072-097572-0976

Part No. Machine Type Per Pair £ +5 72-0976 Double Ended foil Knives 3mm x 0.5mm £110.00 £104.5072-0975 Double Ended foil Knives 3.5mm x 0.6mm £110.00 £104.5072-0977 Double Ended foil Knives 4mm x 0.6mm £110.00 £104.50Urban Knives72-0400 Urban SV300 Groove Knives - 3mm x 0.4mm (Old Style) £57.00 £54.1572-0401 Urban SV300 Groove Knives - 3mm x 0.5mm (Old Style) £57.00 £54.1572-0406 Urban SV300 Groove Knives - 3mm x 0.6mm (Old Style) £57.00 £54.1572-0403 Urban SV300 Groove Knives - 3.5mm x 0.4mm (Old Style) £57.00 £54.1572-0407 Urban SV300 Groove Knives - 3.5mm x 0.6mm (Old Style) £57.00 £54.1572-0402 Urban SV300 Groove Knives - 4mm x 0.4mm (Old Style) £57.00 £54.1572-0405 Urban SV300 Groove Knives - 4mm x 0.5mm (Old Style) £57.00 £54.1572-0700 Urban SV400 Groove Knives - 3mm x 0.4mm £60.00 £57.0072-0701 Urban SV400 Groove Knives - 3mm x 0.5mm £60.00 £57.0072-0702 Urban SV400 Groove Knives - 4mm x 0.4mm £60.00 £57.0072-0703 Urban SV400 Groove Knives - 4mm x 0.5mm £60.00 £57.00Jade Knives72-0300 TG3000 Groove Knives - 3mm x 0.4mm £55.00 £52.2572-0301 TG3000 Groove Knives - 3mm x 0.5mm £55.00 £52.2572-0309 TG3000 Groove Knives - 3mm x 0.6mm £55.00 £52.2572-0306 TG3000 Groove Knives - 3.5mm x 0.5mm £55.00 £52.2572-0308 TG3000 Groove Knives - 3.5mm x 0.6mm £55.00 £52.2572-0302 TG3000 Groove Knives - 3.5mm x 0.7mm £55.00 £52.2572-0304 TG3000 Groove Knives - 4mm x 0.4mm £55.00 £52.2572-0303 TG3000 Groove Knives - 4mm x 0.5mm £55.00 £52.25Someco Knives72-0800 Someco CCM3P/4F Groove Knives - 3mm x 0.4mm £100.00 £95.0072-0801 Someco CCM3P/4F Groover Knives - 3mm x 0.5mm £100.00 £95.0072-0805 Someco CCM3P/4F Groove Knives - 3.5mm x 0.4mm £100.00 £95.0072-0803 Someco CCM3P/4F Groove Knives - 4mm x 0.4mm £100.00 £95.0072-0802 Someco CCM3P/4F Groove Knives - 4mm x 0.5mm £100.00 £95.00Elumatec Knives72-0600 MPA Groove Knives - 3mm x 0.4mm £60.00 £57.0072-0601 MPA Groove Knives - 3mm x 0.5mm £60.00 £57.0072-0603 MPA Groove Knives - 4mm x 0.4mm £60.00 £57.0072-0602 MPA Groove Knives - 4mm x 0.5mm £60.00 £57.00Rotox Knives72-1045 Rotox EKA379 Groove Knives - 3mm x 0.6mm £115.00 £109.2572-1047 Rotox EKA379 Groove Knives - 3mm x 0.7mm £115.00 £109.2572-1048 Rotox EKA379 Groove Knives - 3mm x 0.8mm £115.00 £109.2572-1046 Rotox EKA379 Groove Knives - 3mm x 0.6mm £115.00 £109.25

Per Set £ +5Wegoma Knives72-0500 Wegoma KA111 Transom Groover Knives - 3mm x 0.4mm (set of 4) £105.00 £99.7572-0503 Wegoma KA111 Transom Groover Knives - 3mm x 0.5mm (set of 4) £105.00 £99.7572-0504 Wegoma KA111 Transom Groover Knives - 3mm x 0.6mm (set of 4) £105.00 £99.7572-0508 Wegoma KA111 Transom Groover Knives - 3mm x 0.7mm (set of 4) £105.00 £99.7572-0506 Wegoma KA111 Transom Groover Knives - 3.5mm x 0.4mm (set of 4) £105.00 £99.7572-0501 Wegoma KA111 Transom Groover Knives - 3.5mm x 0.5mm (set of 4) £105.00 £99.7572-0507 Wegoma KA111 Transom Groover Knives - 3.5mm x 0.6mm (set of 4) £105.00 £99.7572-0505 Wegoma KA111 Transom Groover Knives - 4mm x 0.4mm (set of 4) £105.00 £99.7572-0502 Wegoma KA111 Transom Groover Knives - 4mm x 0.5mm (set of 4) £105.00 £99.75

Per Knife £ +590-0004 Sharpening service available on request £14.25 £13.50

Grooving Knives






26

Tungsten Carbide Tipped - T.C.T. Saw Blades

Suitable for cuttingPlastic & Aluminium

Part No. Description 74-0001 250 x 3.2/2.8mm x 32 x 80T (TCT SAW BLADE) (NEG)

74-0002 250 x 2.2/1.6mm x 32 x 120T (TCT SAW BLADE) T10120TC

74-0002A 250 x 2.2/1.6mm x 30 x 120T (TCT SAW BLADE) T10120TC

74-0002B 250 x 2.2/1.6mm x 20 x 120T (TCT SAW BLADE) T10120TC

74-0002C 250 x 2.2/1.6mm x 32 x 100T (TCT SAW BLADE) (8deg POSITIVE)

74-0002D 250 x 2.8/1.6mm x 32 x 126T (TCT SAW BLADE)

74-0002S 250 x 2.5/1.8mm x 32 x 126T (TCT SAW BLADE) N2EAM6T3

74-0003 300 x 3.2/2.6mm x 32 x 96T (TCT SAW BLADE)

74-0003A 300 x 3.2/2.6mm x 30 x 96T (TCT SAW BLADE)

74-0003B 300 x 3.2/2.6mm x 32 x 96T (TCT SAW BLADE) COPPER INSERT


74-0004A 330 x 3.2/2.6mm x 30 x 102T (TCT SAW BLADE)


74-0006 400 x 4/3mm x 32 x 102T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0006A 400 x 4/3mm x 30 x 102T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0006B 400 x 4/3.6mm x 30 x 120T (TCT SAW BLADE)

74-0006C 400 x 4/3.2mm x 30 x 102T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0007 420 x 4/3mm x 32 x 102T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0008 450 x 4.0mm x 32 x 144T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0008A 450 x 4.0 x 32mm x 96T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0008B 450 x 4.0 x 30mm x 144T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0008W 450 x 4.0/3.4mm x 32 x 144T (TCT WOOD BLADE) (Pin 11mm/63mm)

74-0009 500 x 4.0/3.2 x 32 x 120T (TCT SAW BLADE) (Pin 11mm on 63mm)

74-0009A 500 x 4.0/3.4 x 30 x 120T (TCT SAW BLADE) N2EAM13






27

Suitable for cutting Plastic, Aluminium & Steel

High Speed Steel - H.S.S. Saw Blades

Part No. Description SHSS Saw Blades

73-0020 103mm x 2mm x 32mm R/H Bevel (BS771)

73-0021 103mm x 2mm x 32mm L/H Bevel (BS771)

73-0022 180mm x 2mm x 32mm 180 Teeth

73-0001 200mm x 2mm x 32mm 200 Teeth

73-0027 225mm x 2mm x 32mm x 200 Teeth

73-0023 250mm x 2mm x 32mm x 80 Teeth

73-0024 250mm x 2mm x 32mm x 100 Teeth

73-0004 250mm x 2mm x 32mm x 160 Teeth

73-0007 200mm x 2mm x 32mm x 160 Teeth

73-0025 250mm x 2mm x 32mm x 200 Teeth

Millenium Blades

73-0026B 175mm x 1.8mm x 20mm x 200 Teeth (Millenium)

73-0032 216mm x 1.8mm x 30mm x 200 Teeth (Millenium)

73-0026A 225mm x 1.8mm x 32mm x 200 Teeth (Millenium)

73-0026 250mm x 1.8mm x 32mm x 200 Teeth (Millenium)

73-0026C 300mm x 2.5mm x 32mm x 220 Teeth (Millenium)

Part No. Description Spacers

78-0001 Spacer 32mm To 20mm x 2mm Thick

78-0002 Spacer 32mm To 30mm x 2mm Thick






28

The 880 Universal Handsaw gives fast cutting and a fine finish on all timber, plastic and composite boards.

Improved soft grip handle that incorporates 45 and 90 degree angle guides. The thick, strong and wider blade gives maximum control. 20” length.

Gives fast and fine cutting on chipboard and plastics.

- 22” length.

Non-slip grip handles are welded to the blade for strength and feature:

- integral 45 and 90 degree angles - 20” length.

Part No. Description Each £

78-0100 Irwin Jack 880 Universal Saw £11.00


78-0101 Bahco Superior 2600XT Universal Hand Saw £25.75


78-0102 Stanley Universal Handsaw £9.50

Handsaws






29

A professional hacksaw frame with a unique blade tension for straight accurate cuts.

Alternative 55 degree blade pin mounted to allow for flush cutting.


78-0103 Bahco 319 Hacksaw frame £22.60

78-0104 Hacksaw Blades (pack of 2) £2.35


78-0105 Bahco Junior Hacksaw £3.25


78-0105A Junior Hacksaw Blades (pack of 10) £3.05

Handsaws






30

Part No. Description Each £ +10 69-0002 Don Carlos Knife (Original) £18.50 £17.55

69-0002A Leather Sheath £6.55 £6.20

Part No. Description Each £ +10 69-0019 Don Carlos Multi-Purpose Knife £11.50 £10.90

Part No. Description Each £ +10 69-0001 T11-001 - Economy Moon Knife £5.95 £5.65

69-0002A Leather Sheath £6.55 £6.20

A very high quality knife with one straight cutting edge made by the market leader Don Carlos.

Designed for all purposes including chipping out and general cleaning of PVC windows.

An economy replica of the original Don Carlos knife giving excellent value for money.

Don Carlos Knives

69-0001






31

Sprue Guide

Glaziers Knife

Part No. Description Each £ +10 69-0003 Sprue Guide 0.4mm thick £14.25 £13.55

Part No. Description Each £ +10 69-0022 Glaziers Knife With Plastic And Rubber Handle £8.60 £8.15

Part No. Description Each £ +10 69-0023 Putty Knife £2.90 £2.75

This solid plastic handled knife has become very popular in the window industry for removing bead from PVC and Aluminium windows.

This solid stainless steel rigid putty knife is also ideal for deglazing PVC and Aluminium windows.






32

Instant change retractable blade knife.

A grey painted die-cast metal body, ergonomically shaped for a comfortable grip.

The blade shifter can control the extension of the blade. Three blades are stored in the handle.

A heavy-duty, general purpose blade ideal for material requiring a stiffer and stronger blade.

Stanley Knives


69-0020 Cast Metal Skimmer Knife £3.50 £3.30

69-0020A Spare Blades for Skimmer (per 5) £0.55 £0.50


78-0402 Stanley Dynagrip Instant Change Knife £9.40


78-0400 Stanley Retractable Blade Knife £5.45


78-0403 Stanley 1992 Trimming Knife Blades (pack of 10) £2.35






33

All the renowned blade qualities of the Marples chisel range, together with guaranteed unbreakable handles designed for use with a hammer.

They are ideal for heavy-duty work.Marples undertake to replace free of charge any chisel which has a split handle, regardless of age or condition.

Convenient three piece set consisting of sharpening stone, bottle of lubricating oil and honing guide.

Part No. Description Imperial Each £

78-0300 3mm Irwin Marples M373 Splitproof Bevel Edge Chisel 1/8" £19.65




78-0304 16mm Irwin Marples M373 Splitpoof Bevel Edge Chisel 5/8" £17.70


78-0306 25mm Irwin Marples M373 Splitproof Bevel Edge Chisel 1" £19.15

Part No. Description Imperial Each £

78-0308 3mm Irwin Marples Soft Touch Bevel Edge Chisel 1/8" £13.25




78-0312 25mm Irwin Marples Soft Touch Bevel Edge Chisel 1" £9.60

Part No. Description Each £78-0307 Stanley Stone & Honing Guide £14.65

Solid Bolster Chisel






34

V-Cut Gasket Shears

Gasket Scissors


69-0028 4104/vr -V-Cut Gasket Gasket Shears (Lowe) £50.00 £47.50

69-0028B 4002/v - V-Cut Spare Base Plate (Lowe) £6.00 £5.70

69-0029 V-Cut Spare Blades (Pair) (Lowe) £4.00 £3.80


69-0028M V-Cut Gasket Shears (Blue) £42.00 £39.90

69-0029B V-Cut Anvils (Blue) £16.80 £15.95

69-0029M V-Cut Blades (Each) (Blue) £16.20 £15.40


69-0013 Economy Gasket Scissors 19cm £7.45 £7.05

69-0014 Economy Gasket Scissors 14cm £6.30 £5.95


69-0007 Gasket Scissors £14.95 £14.20

69-0007A Repair Kit Gasket Scissors £2.00 £1.90






35

Universal Cutter

Gasket Shears Original Lowe

Economy Gasket Shears

Lowe Mitre Cutter

New shears from Original lowe incorporating a quick change utility type blade.


69-0005 1105 - Lowe Universal Cutter £26.25 £24.95

69-0005A 1001 - Replacement Blade £6.15 £5.85

69-0005B 1002 - Replacement Anvil Base £1.50 £1.40


69-0006 3101 - Original Lowe Gasket Shear 45 Degree £22.45 £21.30

69-0006A 3001 - Replacement Blade £8.25 £7.85

69-0006B 3002 - Replacement Anvil Base £3.85 £3.65


69-0025 3804 - Lowe Mitre Cutter with Stanley blade £26.25 £24.95

69-0025A 3001/Tr/25 - Replacement Straight Blade (pack 25) £23.85 £22.65

69-0025B 3010 - Lowe Mounting Support £3.75 £3.35

69-0025C 3002 - Replacement Anvil Base £3.35 £3.20


69-0011 Gasket Shears (Economy) £7.95 £7.55






36

78-0501

78-0500

78-0503

Heat treated carbon steel forged pliers, with ground heat treated cutting edges that will give longer life, durability and accuracy when cutting.

“Maxsteel” Pliers have bi-material handles with severe grip grooving and large gripping area which provide comfortable grip.

They are made from heat treated steel forgings for long life and durability.

The cutting edges are high frequency heat treated, hand ground finished and provide a high quality accurate cutting performance.

Pliers


78-0500 Stanley Maxsteel Diagonal Cut Plier £12.95 £12.30

78-0501 Stanley Maxsteel End Cutter £14.15 £13.40


78-0502 Stanley Dynagrip Diagonal Plier £9.40 £8.90

78-0503 Stanley Diagonal Cutting Plier £7.85 £7.45

78-0502






37

Thor Hammers

Part No. Description Each £ +10 69-0021 Thor White Rubber Mallet £4.50 £4.25

Part No. Description Each £ +10 69-0017 25mm - Thorex Beading Hammer - Wooden Handle £7.35 £6.95

69-0017B 25mm - Grey End Cap - Soft £0.85 £0.80

69-0017C 25mm - Red End Cap -Medium £0.65 £0.60

69-0017A 25mm - White End Cap - Hard £1.00 £0.95

69-0018 32mm - Thorex Beading Hammer - Wooden Handle £8.45 £8.00

69-0016C 32mm - Grey End Cap 32mm - Soft £1.10 £1.05

69-0016D 32mm - Red End Cap Red - Medium £0.90 £0.85

69-0016B 32mm -White End Caps - Hard £1.25 £1.20

Part No. Description Each £ +10 69-0016 32mm - Thorex Nylon Hammer - Plastic Hammer £9.25 £8.75

69-0016C 32mm - Grey End Cap - Soft £1.10 £1.05

69-0016D 32mm - Red End Cap - Medium £0.90 £0.85

69-0016B 32mm - White End Cap - Hard £1.25 £1.20

69-0024 38mm - Thorex Nylon Hammer - Plastic Handle £9.65 £9.15

69-0024B 38mm - Grey End Cap - Soft £1.35 £1.30

69-0024C 38mm - Red End Cap - Medium £1.15 £1.10

69-0024A 38mm - White End Cap -Hard £1.60 £1.50






38

Quick Grip Clamps

Part No. Description Each £ +5 69-0054 Quick Grip Clamp 6” £16.25 £15.45

69-0050 Quick Grip Clamp 12” £18.15 £17.25

69-0051 Quick Grip Clamp 18” £20.05 £19.05

69-0052 Quick Grip Clamp 24” £22.95 £21.80

Part No. Description Each £ +5 69-0053 Economy Quick Grip Clamp 12” £6.95 £6.60






39

Kip Lock Handles

Allen Keys

Adjustable kiplock handles with die cast handle.

Cushion grip, plastic handled keys with a ball end driver to turn screws at angles up to 25 degrees.

Part No. Description Each £ +585-1200 M5 x 50mm Male Kip Lock Handle £3.80 £3.6085-1201 M6 x 25mm Male Kip Lock Handle £3.70 £3.5085-1202 M6 x 63mm Male Kip Lock Handle £4.10 £3.9085-1301 M8 x 25mm Male Kip Lock Handle £4.25 £4.0585-1302 M8 x 63mm Male Kip Lock Handle £4.50 £4.2585-1402 M10 x 25mm Male Kip Lock Handle £5.00 £4.7585-1401 M10 x 63mm Male Kip Lock Handle £6.00 £5.7085-1451 M12 x 63mm Male Kip Lock Handle £7.00 £6.6585-1425 M6 Female Kip Lock Handle £3.50 £3.3085-1450 M8 Female Kip Lock Handle £4.00 £3.8085-1701 M10 Female Kip Lock Handle £5.00 £4.7585-1702 M12 Female Kip Lock Handle £6.00 £5.70

Part No. Description Each £ +578-0599 2mm - Ball Key - T Handle £4.50 £4.2578-0598 2.5mm - Ball Key - T Handle £4.50 £4.2578-0600 3mm - Ball Key - T Handle £4.50 £4.2578-0601 4mm - Ball Key -T Handle £5.00 £4.7578-0602 5mm - Ball Key - T Handle £5.85 £5.5578-0603 6mm - Ball Key - T Handle £6.60 £6.25






40

Part No. Description Each £ +10 96-243-7016 Anthrasite Grey - (RAL 7016) £9.99 £9.49

96-243-7012 Basalt Grey - (RAL 7012) £9.99 £9.49

96-243-9005 Black - (RAL 9005) £9.99 £9.49

96-243-221608 Capstone Blue £9.99 £9.49

96-243-160207 Capstone Red £9.99 £9.49

96-243-55497 Cherry £9.99 £9.49

96-243-851805 Dark Brown £9.99 £9.49

96-243-13187 Green £9.99 £9.49

96-243-7015 Grey - (RAL 7015) £9.99 £9.49

96-243-96006 Irish Oak £9.99 £9.49

96-243-33986 Mahogany £9.99 £9.49

96-243-118593 Oak £9.99 £9.49

96-243-115001 Rosewood £9.99 £9.49

96-243-9016 Traffic White - (RAL 9016) £9.99 £9.49

96-243-47500 White - (RAL 47500) £9.99 £9.49

KONIG Colour Repair Pens

KONIG Window Doctor Repair Kit

The ‘Window Doctor Repair Kit’ consist of hard wax in White, Mahogany, Rosewood and Oak.

(The kit also includes a heating iron and wire wool). This is ideal for fitters to make small repairs on site to minor scratches, dents or bruises to UPVC or wooden windows.

Please specify profile supplier and Ral number when placing your order.

£45.50 (net) each

For further colours please specify profile supplier and Ral number.

K0243 new style colour edging pens with the ‘SQUEEZE’ application and a spare ‘FINELINE’ tip in the base.For further colours please specify profile supplier and Ral number.






41

Safety Products

Part No. Description Each £ +5 64-2000 Grey Velcro Wrist Protector £18.50 £17.55

64-2001 Black Leather Wrist Protector £15.25 £14.50

67-3503 Fingerless Protective Gloves £47.20 £44.85

Part No. Description Each £ +10 67-352510 Nevada Kevlar Sleeve 10" Length £3.65 £3.50

67-352514 Nevada Kevlar Sleeve 14" Length £3.15 £3.00

67-352518 Nevada Kevlar Sleeve 18" Length £2.85 £2.70

Kevlar sleeve gives increased protection from cuts, slashes and tears. thumb hole to prevent the sleeve from slipping.

Conforms to EN388 - 1994






42

Safety Products

Part No. Description Per Pair £ +10 67-3521M 8/M - Black Latex Coated Thermal Glove - 451 £3.45 £3.30

67-3521L 9/L - Black Latex Coated Thermal Glove - 451 £3.45 £3.30

67-3521XL 10/XL - Black Latex Coated Thermal Glove - 451 £3.45 £3.30

Part No. Description Per Pair £ +10 67-3522M 7/M - White Polyurethane Coated Glove - B0500 £2.25 £2.15

67-3522L 8/L - White Polyurethane Coated Glove - B0500 £2.25 £2.15

67-3522XL 9/XL - White Polyurethane Coated Glove - B0500 £2.25 £2.15

General use thermal black latex coated glove has the palm and fingertips coated for excellent antislip grip, and has excellent thermal properties and is ideal for use outside or in cold conditions.


Abrasion Cut Tear Puncture

0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5


0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5

Light weight polyurethane coated glove ideal for production, cleaning, mechanical.







43

Safety Products

Part No. Description Per Pair £ +10 67-3523M 7/M - Black Polyurethane Coated Glove - B0500 £2.25 £2.15

67-3523L 8/L - Black Polyurethane Coated Glove - B0500 £2.25 £2.15

67-3523XL 9/XL - Black Polyurethane Coated Glove - B0500 £2.25 £2.15

Part No. Description Per Pair £ +10 67-3520M 8/M - Orange Latex Coated Glove - 310 £2.25 £2.15

67-3520L 9/L - Orange Latex Coated Glove - 310 £2.25 £2.15

67-3520XL 10/XL - Orange Latex Coated Glove - 310 £2.25 £2.15

Light weight polyurethane coated glove ideal for production, cleaning, mechanical.


General use orange latex coated glove has the palm and fingertips coated for excellent antislip grip, ideal for window fitters, building sites, masonry, carpentry etc.



0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5


0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5






44

The Showa S-Tex KV3 Glove is ideal for transporting plate glass sharp edged sheets made from Seamless Kevlar/Stainless Steel/Polyester liner with a latex coating. This glove performs in 2 ways outstanding protection against cuts and Preserved dexterity.


Safety Products

Part No. Description Per Pair £ +10 67-3524M 7/M - Dyneema Polyurethane Coated Glove (anti cut) 541 £7.75 £7.35

67-3524L 8/L - Dyneema Polyurethane Coated Glove (anti cut) 541 £7.75 £7.35

67-3524XL 9/XL - Dyneema Polyurethane Coated Glove (anti cut) 541 £7.75 £7.35

Part No. Description Per Pair £ +10 67-3519M 8/M - Showa S-Tex KV3 Glove £9.80 £9.30

67-3519L 9/L - Showa S-Tex KV3 Glove £9.80 £9.30

67-3519XL 10/XL - Showa S-Tex KV3 Glove £9.80 £9.30

Light weight polyurethane coated glove is for the glass industry, mirror trade, handling sharp objects & building metal frame works etc.



0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5


0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5






45

Kevlar seamless glove latex coated is ideal for the glass industry, mirror trade, handling sharp objects & building metal frame works etc.


Safety Products

Part No. Description Per Pair £ +10 67-3518M 7/M - The Ninja X4 Glove £8.00 £7.60

67-3518L 8/L - The Ninja X4 Glove £8.00 £7.60

67-3518XL 9/XL - The Ninja X4 Glove £8.00 £7.60

Part No. Description Per Pair £ +10 67-3508 8/M - Kevlar Latex Coated Glove (Anti Cut) GPKV1 £7.70 £7.30

67-3508L 9/L - Kevlar Llatex Coated Glove (Anti Cut) GPKV1 £7.70 £7.30

67-3508XL 10/XL - Kevlar Latex Coated Glove (Anti Cut) GPKV1 £7.70 £7.30

This glove primarily used in the Engineering, Glass and Construction.Providing excellent wet and dry grip and has a unique Bipolymer palm coating elasticated wrist And cut resistant liner, Silicone free.



0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5


0 0 0 0

1 1 1 1

2 2 2 2

3 3 3 3

4 4 4 4

5 5 5 5






46

Safety Products

Part No. Description Each £ +10 67-3526 Utah Nitrile Disposable Glove (Box 100) £6.50 £6.15

Fuchs Centrex Wipeout. Hand cleaning & surface wipes. Removes oil and grease.

Part No. Description Each £ +5 79-0021 Fuchs Centrex Wipeout (Approx. 150) £15.75 £14.95

Nitrile disposable glove ambidextrous, powder and latex free. resistant to oils, hydro-carbons, acids and many chemicals.

Conforms to EN374






47

Skytec Orion safety spectacle

- Modern style twin lens wraparound safety spec- Wrap around frame - ultra modern style- Designer style, sprung side arms- Soft ‘pillow style’ nosepiece- Polycarbonate lens with anti-scratch, anti-mist coating

Skytec Trident safety spectacle

- Polycarbonate lens with anti-scratch, anti-mist coating- Modern style twin lens wraparound safety spec- Ultra lightweight one piece wraparound frameless lens

with inbuilt side protection- Designer style, sprung side arms - Side arms adjustable for tilt and length - Polycarbonate lens

Skytec Neptune safety spectacle

- Modern style safety spec- Ultra lightweight one piece wraparound frameless lens

with inbuilt side protection- Side arms adjustable for tilt and length- Polycarbonate lens with anti-scratch, anti-mist coating

Skytec Invincible safety spectacle

- Modern style twin lens wraparound safety spec- Wrap around frame - ultra modern style- Designer style, sprung side arms- Soft ‘pillow style’ nosepiece- Polycarbonate lens with anti-scratch, anti-mist coating- Neckband available

67-3530

67-3531

67-3532

67-3533

Part No. Description Each £ +5 67-3530 Skytec Orion Safety Spectacle £3.60 £3.40

67-3531 Skytec Trident Safety Spectacle £1.75 £1.65

67-3532 Skytec Neptune Safety Spectacle £2.00 £1.90

67-3533 Skytec Invincible Safety Spectacle £3.50 £3.30

Safety Products






48

Ear Defenders

With foam filled cushions for use where low attenuation is required to remove repetitive background noise. Assumed protection at 8kHz= 23.6dB

With soft hypoallergenic foam and tapered shape

Soft round shape foam plugs for proper sealing of ear canal entrance and reduced pressure.

Easy to use, lightweight and comfortable.

Part No. Description Each £ +5 67-3507 Ear Defenders - Lightweight £3.25 £3.10

Part No. Description Each £ +5 67-3540 Corded Disposable Earplugs (pack of 100) £22.20 £21.10

Part No. Description Each £ +5 67-3541 Banded Earplugs (pack of 10) £24.90 £23.65

67-3542 Replacement Pods For Banded Earplugs £23.15 £22.00

Part No. Description Each £ +5 67-3543 E.A.R. Ear Cap £2.40 £2.30

67-3544 E.A.R. Ear Cap Spare Pods (10 pairs) £9.50 £9.00

Conforms to EN352-2 SNR31








49

Ear Defenders

Pre-moulded and washable. Detachable cord.

Wall mounted or free standing. Without refill

Refill contains 500 pairs. Conforms to EN352-2 (see description below for SNR)

Part No. Description Each £ +5 67-3545 E.A.R. Ultrafit £1.20 £1.15

Part No. Description Each £ +5 67-3546 E.A.R. Aearo One Touch dispenser £26.60 £25.25

Part No. Description Each £ +5 67-3547 E.A.R. Aearo One Touch Classic Refill SNR28 £47.50 £45.10

67-3548 E.A.R. Aearo One Touch Earsoft Neon Refill SNR36 £36.50 £34.65






50


69-1000 Box of 4 £29.95

69-1001 Single £8.00






51

Printers and LabelsIntermec Printer

Zebra Printer

47-0255

47-0256

Part No. Description Per 1000 £

47-0255B Blue Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255G Green Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255LG Light Grey Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255L Lilac Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255O Orange Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255P Pink Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255R Red Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255W White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255Y Yellow Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255BW Blue/White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255GW Green/White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255OW Orange/White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255RW Red/White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

47-0255YW Yellow/White Peelable Labels - 101mm x 36.5mm (1500 Per Roll) £8.25

Part No. Description Per 1000 £

47-0256B Blue Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256G Green Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256GR Grey Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256LG Light Grey Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256O Orange Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256P Pink Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256C White Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0256Y Yellow Peelable Aurora Labels - 101mm x 36.5mm (2500 Per Roll) £8.2547-0223 White Thermal Labels - 38mm x 67mm (500 Per Roll) £6.5047-0223A White Thermal Labels - 40mm x 72mm (500 Per Roll) £8.25






52

83-0100 83-0101

83-0102

Part No. Description Each £ +5083-0100 Brush Glide strip (2mtr length) £7.80 £7.40

83-0101 Steel Backing (2mtr length) £5.95 £5.65

Part No. Description Each £ +5083-0102 Nylon Glide Strip (2mtr length) £8.20 £7.80

Other items available

Work Bench Glide and Brush Strip

Compatible with 83-0101 steel backing.

Simple installation of brush panels

Supporting elements can be arranged as needed






53

PTFE-Coated Fabric

Premium Grade Brown High Performance Silver Red Laminate

Part No. Description per mtr £ +10 83-0003P Self-Adhesive PTFE 6 Thou Premium Grade £18.00 £16.00

83-0003X Self-Adhesive High Performance Silver PTFE £28.00 £26.00

83-0003R Self-Adhesive High Performance Red PTFE £40.00 £37.00

83-0004 Non-Adhesive Brown PTFE £12.50 £11.85

83-0003S Non-Adhesive Silver PTFE £22.00 £20.90

83-0004R Non-Adhesive Red PTFE £34.00 £32.30

This Tygaflor product is a PTFE-coated fabric with a high performance, silicone pressure sensitive adhesive on one side.

Its smooth surface ensures superior release properties in demanding high temperature applications. Recommended for UPVC welding.


57-0103 BD23359 - Ready Cut PTFE Sleeve - 200mm x 584mm (Brown) £2.80



57-0120 BD22622 - Ready Cut PTFE Sleeve - 280mm x 225mm £2.75

83-0005 BD20022 - Ready Cut PTFE Bag - 325mm x 560mm (Brown) £5.75

57-0117S CF1062S00G JIG/069 - Ready Cut PTFE Sleeve - (Silver) £8.10

57-0109S BD23497 - Ready Cut PTFE Ring - 225mm x 430mm (Silver) £3.80

57-0105R BD20277 - Ready Cut PTFE Sleeve - 200mm x 525mm (Red) £5.20


75-0201 Solvent Citrus Based De-Greaser (1 Litre) ideal for heater plates £9.95

75-0202 Solvent Citrus Based De-Greaser (5 Litre) ideal for heater plates £35.00






54

Part No. Description

70-0601 Messfix Measuring Stick 3m



58-1000 Nedo Messtronic

58-1001 Memory Module For Nedo Bar (58-1000)


70-0600 Mini-Anglefix Type 450

70-0600E Digital Anglefix

70-0607 Messfix Laser Distance Meter

70-0608 Winkletronic Easy

Nedo Measuring Equipment

70-0600

70-0600E

70-0607

70-0608






55


FLIPSTOP1 FLIPSTOP 1 Metre Set £176.65




FLIPSTOP CARRIAGE COMPLETE 104 - FLIPSTOP CARRIAGE (COMPLETE) £72.50

58-0100 106 - 3 METRE FLIP STOP TAPE (L/H) RIGHT - LEFT £15.50

58-0101 107 - 3 METRE FLIP STOP TAPE (R/H) LEFT - RIGHT £15.50


70-0615* Steel Ruler 300mm £2.25

*Other sizes available

Flipstop

Measuring Equipment

Part No. Description Each £ +5 78-0700 Stanley 5M Tape Measure (19mm blade) £4.85 £4.60

78-0702 Stanley 5M Fat Max Tape Measure (32mm blade) £15.65 £14.85

78-0701 Stanley 8M Tape Measure (25mm blade) £9.35 £8.90






56

R250 Glazing Bead Saw

Standard Features

- Manual Clamping- Facility to cut angles at 45º, 90º, 45º degrees with pre-set angles in between- Large bed plate to support all glazing beads and other small profiles- 3 phase 415/440 Volt UK Motor- 1 phase 240 Volt UK Motor- Saw Blade 250mm with a 32mm Bore


44-0501 MEC & COBRA SPRING & HOLDER

44-0502 MEC & COBRA SPRING

44-0013 3 PHASE AMNTF-060-UI-700 SWITCH

44-0400 1 PHASE SWITCH COBRA/MEC250

73-0026 250mm x 1.8mm x 32mm x 200 TEETH (MILLENIUM SAW BLADE)






57

GP300

MEC 250

Part No. DeScriPtioNM2R/033 MEC250 SPRING & HOLDER

M2R/037 PEGIC RETURN SPRING

44-0401 3 PHASE SWITCH-COBRA/MEC250 (ALCWFC00C0) 400V

44-0400 1 PHASE SWITCH-COBRA/MEC250 (ALCWFC00C0) 240V

73-0026 250mm x 1.8mm x 32mm x 200 TEETH (MILLENIUM SAW BLADE)

(44-0400)

(M2R/033)






58

Pedrazzoli Brown 250 Steel Cutting Saw

Part No. DeScriPtioN58010s SINGLE PHASE

58000s THREE PHASE

Blade Included Base not supplied

recommeNDeD SPare PartS for - BrowN 250Promac coDe PeDrazolli coDe DeScriPtioN51-0001 BLADE SHAFT

51-0002A BRASS GEAR WITH KEYWAY

51-0003 NO 65 METAL GUARD

51-0004 NO 66 PLASTIC GUARD ORANGE

51-0004A NO 66 METAL GUARD ORANGE

51-0006 NO 84 SIDE GUARD

51-0060 COMPLETE GUARD

Manual action with vice and integral material support.Standard Features:- Application range; mild steel

- Versatility; mitre cuts 45 degrees left

- Safety; and self closing sawblade guard totally encloses the teeth when the cutting head is at rest

- Electric coolant system; standard fitment

SpecificationMain drive motor KW - 0.75Maximum blade diameter mm - 250Saw shaft speed RPM - 38Max. vice opening mm - 100Vice jaw height mm - 40Electric coolant pump KW - 0.08Coolant pump delivery l/min - 22Coolant reservoir L - 8Dimensions mm - 440 x 540 x 800Weight (approx) kg - 67






59

Thomas Cut 250 Steel Saw

Part No. DeScriPtioNAAH8200B Single Phase

AAH81000 Three Phase

(Base not included)Price includes 3 months warranty parts - delivery extra

recommeNDeD SPare PartS for - thomaS 250Promac coDe thomaS coDe DeScriPtioN51-0753 AG190086 FIXED BLADE GUARD

51-0754 AF190006 BLADE SHAFT

51-0759 AH190087 BLUE PLASTIC MOBILE GUARD

51-0765 AB190042 WORM WHEEL

73-0025 250mm x 2mm x 32mm x 200 TEETH SAW BLADE

Technical Data

- Gear box reduction unit in oil bath with nickel bronze gear and hardened and ground worm screw- Vice complete with burr free clamping device- Double adjustable hinged pivot- Coolant pump- Available in single and three phase versions

Optional Extra- Steel Base






60

BJM Cutting Centre

Get versatility to deal with changing product hardware.

- Speed X, or Speed X2 machining module, 3- or 6-axis servo controlled processing, interpolating, capable of parallel working on an X-range of 300mm (bar direction)

- Ø5mm (Ø3mm drill tip) and Ø8mm routers, interpolating, grant full prepping flexibility

- New feature: motorized angle adjustment for drainage routers

- No fixed position for the tools

- No hard-written prepping macros required

- XML format allows open geometries

- Production flexibility

- Product flexibility

- Product design flexibility

- Colour flexibility

- Prevention of product change downtime!

- the FTB provides Windows OS with flexible order handling (Beckhoff TwinCat)

- (Start - interrupt, put back, select priority and insert call back) are standard functions

- continuous bar loading is a standard

- AVP automatic adjustable profile support system (bar data driven, optional)






61

Promac coDe BJm Part No DeScriPtioNelectrical itemS11-03-0001-103 03-0001-103 VS 31.09-24 PERSKE MOTOR (RH) (1.1kw)

11-03-0001-167 03-0001-167 VS 31.09-24 PERSKE MOTOR (LH) (1.1kw)

11-03-0001-032 03-0001-032 KNUS 23.10-2 PERSKE MOTOR (0.5kw)

11-03-0007-026 03-0007-026 MAGNETIC SENSOR SME 5-L-1-10-I-2-A

11-03-0007-02 03-0007-002 SIKO AS510/1-0001 MAGNETIC SENSOR

11-03-0007-01 03-0007-001 MS500-0001 CABLE FOR THE AS510/1

11-03-0008-019 03-0008-019 PROXIMITY SWITCH M8 (PNP

11-03-0002-072 03-0002-072 BECKHOFF KL1002 BUS COUPLER






11-03-0003-113 03-0003-113 SMC CYLINDER SWITCH D-A73H

11-03-0003-082 03-0003-082 SMC CYLINDER SWITCH D-A93

11-03-0003-118 03-0003-118 SMC CYLINDER SWITCH D-A93 (PLUG VERSION)

11-03-0003-020 03-0003-020 REED SWITCH FOR CYLINDER

11-03-0003-073 03-0003-073 REXROTH CYLINDER SWITCH 275 015 2311

PNeumatic itemS11-02-0002-219 02-0002-219 REXROTH VALVE 0820 055 051

11-02-0002-220 02-0002-220 REXROTH VALVE 0820 055 501

Saw BlaDe11-06-0003-029 06-0003-029 550mm TCT SAW BLADE

miller tiPS11-06-0002-059 06-0002-059 TCT MILLER TIP (RECTANGLE)

11-06-0002-060 06-0002-060 TCT MILLER TIP (SQUARE)

router cutterS11-06-0007-037 06-0007-037 8mm x 35mm x 100mm LH

11-06-0007-038 06-0007-038 8mm x 35mm x 100mm RH

11-06-0007-021 06-0007-021 5mm x 40mm x 100mm

11-06-0007-023 06-0007-023 2.5mm/5mm x 5mm x 40mm x 100mm






62

This combination between Optima Evolution and MFC Evolution is built for the ContinentalEuropean market, in good RAPID quality and performance.

In feed magazine for 10 PVC profiles

with horizontal and vertical profile clamping

Rapid Cutting Machines






63

Recommended Spare Parts for Rapid Cutting/Machining Centres

Promac Part No raPiD Part No DeScriPtioNelectrical itemS58-8153 51438102 ELTE MOTOR 0.27KW

58-7808 51438094 WALTER MOTOR 1.1KW

58-7804 51402420 POSITIONING MOTOR

58-7524 51101454 PROXIMITY SENSOR (M8 TO M12)

58-7510 51101009 WT18 REFLEX LIGHT SCANNER

mechaNical itemS58-5724 53550998 BLACK PEG

58-5725 53550999 WHITE PEG

58-5726 6100038240 50 TOOTH PINION WHEEL

58-5728A 6100042396 38 TOOTH PINION WHEEL

58-8122 6100024433 50 TOOTH RACK

58-5729 6100038453 38 TOOTH RACK

Saw BlaDeS (ultratech)58-7560 55200500 500mm TCT SAW BLADE

58-8042 55200253 250mm TCT SAW BLADE (LH) (V-NOTCH)

58-8043 55200254 250mm TCT SAW BLADE (RH) (V-NOTCH)

Saw BlaDeS (mFc2000/6500)58-8060AKE 55200516 500mm TCT SAW BLADE (BOMBASTIC)

58-7560 55200500 500mm TCT SAW BLADE

58-8061 55200450 450mm TCT SAW BLADE (90 DEGREE)

58-8057A 55200301 300mm TCT SAW BLADE (V-NOTCH)

router cutterS58-54500396 54500396 4mm x 20/35mm x 80mm (8mm SHANK) SINGLE SPIRAL (RAPID)

58-54500396- C 4mm x 20/35mm x 80mm (8mm SHANK) SINGLE SPIRAL

58-54500366 54500366 5mm x 40mm x 80mm (8mm SHANK) TWIN SPIRAL (POINTED) (RAPID)

58-54500366-C 5mm x 40mm x 80mm (8mm SHANK) TWIN SPIRAL (POINTED)

58-54500378 54500378 5mm x 20/35mm x 90mm (8mm SHANK) SINGLE SPIRAL (RAPID)

58-54500378-C 5mm x 20/35mm x 90mm (8mm SHANK) SINGLE SPIRAL

58-54500379 54500379 5mm x 35/55mm x 90mm (8mm SHANK) SINGLE SPIRAL (RAPID)

58-54500386 54500386 5mm x 35/55mm x 90mm (8mm SHANK) SINGLE SPIRAL (POINTED) (RAPID)

58-54500386-C 5mm x 35/55mm x 90mm (8mm SHANK) SINGLE SPIRAL (POINTED)

58-54500395 54500395 5mm x 35mm x 90mm (8mm SHANK) SINGLE SPIRAL (RAPID)

58-54500081 54500081 8mm x 40mm x 100mm (8mm SHANK) TWIN SPIRAL (RAPID)

58-54500081-C 8mm x 40mm x 100mm (8mm SHANK) TWIN SPIRAL


58-54500102-C 10mm x 50mm x 100mm (10mm SHANK) TWIN SPIRAL

58-54500382 54500382 12mm x 40mm x 100 (10mm SHANK) SINGLE SPIRAL (RAPID)

58-54500382-C 12mm x 40mm x 100 (10mm SHANK) SINGLE SPIRAL







64

through a screwless back stop system ensures a flexible production process.

required profile height.

different profile cross sections.

welding of profile bars with a cutting tolerance of up to + 3 mm.

to increase corner strength.

covers.

favourable position for the operator.

the insertion position for the upper and lower welding heads.

(transom welding).

the heater crush plates are equipped with wear-resistant Nirosta knives.

reinforcements even after welding of the mullion, and subsequent welding of the 4 corners, just as is done many times with 3-head in-line welding machines.

AKS 1805 / AKS 1810

AKS6600






65

Recommended Spare Parts for Urban AKS Welders

57-0501

57-375238

57-0502

57-0742

57-0503

57-2118

57-0801

57-0800

57-2116A

Promac Part No urBaN Part No DeScriPtioNelectrical itemS57-0302C 512-857 1.4MTR THERMOCOUPLE

57-0302B 516-443 2.8MTR THERMOCOUPLE

57-375234 375-234 1.3MTR HEATER PLATE LEAD (3 PIN)

57-375238 375-238 0.95MTR HEATER PLATE LEAD (3 PIN)

57-0800 370-810 ORANGE RUBBER SLEEVE

57-0801 370-107 BRASS CONNECTOR

57-K004509 K004509 1.3MTR HEATER PLATE LEAD (5 PIN)

57-K003070 K003070 SNR-02 CYLINDER SWITCH

57-2063 375-725 PROXIMITY SENSOR

57-2047 375-697 5MTR CABLE FOR PROXIMITY SWITCH

57-0339 380-519 K5 PHEONIX RELAY

57-2018 370-506 ROLLER SWITCH I-SU-1KN

57-2052 370-500 BURN OFF SWITCH C2-U1Z K

57-0503 375-840 ZRD1.2 WELDER TIMER

57-0501 375-821 UTR310 TEMP CONTROLLER

57-0502 381-600 UTR320 TEMP CONTROLLER

57-N025713 N025713 UTR330 TEMP CONTROLLER

PNeumatic itemS57-345200 345-200 BURKET VALVE

57-345213 345-213 BURKET GAS VALVE

57-0565 1050 32MM UNIVERSAL SEAL KIT

57-1727 1727 40MM UNIVERSAL SEAL KIT

57-0742 346-210 ROUND SHAFT BRAKE UNIT

57-2118 347-011 Y AXIS BRAKE UNIT

57-2116A 347-013 X AXIS BRAKE UNIT

mechaNical itemS57-0308 310-973 TOP CLAMP TENSION SPRING

57-2410 310-979 MACHINE TILTING SPRING

57-310709 310-709 AT10/50 DRIVE BELT






66

Corner cleaning machine with inner corner cleaning and freely programmable CNC axis controller for vinyl window profiles.

PC) guarantees operator friendly usage of the corner cleaning machine, as well as a perfect and problem free integration and connection to other machines and manufacturing units.

other connected machines or PCs.

Corner cleaning machine with inner corner cleaning and freely programmable CNC axis control for vinyl window profiles.

possible).

PC) guarantees operator friendly usage of the corner cleaning machine as well as a perfect and uncomplicated integration in your production.

choice.

equipment of up to 16 single tools is possible).

Urban SV530

Urban SV530/S






67

Recommended Spare Parts for Urban SV530/SV530/S Corner Cleaner

PRomac PaRt No uRBaN PaRt No DeScRiPtioNElectrical items

57-2063 375-725 PROXIMITY SENSOR

57-2047 375-697 5mtr CABLE FOR PROXIMITY SWITCH

57-K003070 K003070 SNR-02 CYLINDER SWITCH

57-375728 375-728 PROFILE ID SWITCH

57-2017 375-714 TC55-PB-P24 REFLEX SCANNER

57-2062 375-698 HN33 PA3 REFLEX LIGHT SCANNER

57-376122 376-122 MSK320-0005 MAGNETIC READER

PNeumatic itemS57-345200 345-200 BURKET VALVE

57-345213 345-213 BURKET GAS VALVE

57-0565 1050 32mm UNIVERSAL SEAL KIT

57-1727 1727 40mm UNIVERSAL SEAL KIT

57-0742 346-210 ROUND SHAFT BRAKE UNIT

57-2118 347-011 Y AXIS BRAKE UNIT

57-2116A 347-013 X AXIS BRAKE UNIT

mechaNical itemS57-1003 1700 COMPLETE PROFILE ID SWITCH

57-1003B 579-801 COMPLETE PROFILE ID SWITCH

57-1003C 592-408 COMPLETE PROFILE ID SWITCH

57-1003D 586-666 COMPLETE PROFILE ID SWITCH

57-4603 311-906 X & Y AXIS BELT FOR A SV530

tooliNg57-N004722 N004722 RADIUS KNIFE No 326

57-554016 554-016 PICKING KNIFE No 51

57-N002331 N002331 GROOVE KNIFE 3mm x 0.7mm LH

57-N002332 N002332 GROOVE KNIFE 3mm x 0.7mm RH

57-576718 576-718 WOODGRAIN GROOVE KNIFE 3.5mm x -0.1mm LH

57-576719 576-719 WOODGRAIN GROOVE KNIFE 3.5mm x -0.1mm RH

57-K006397 K006397 DISK CUTTER 250mm x 5mm x 32mm x Z68

57-0603

57-1003B

K003070

57-2063

57-2047

Profile Dependent Bevel Knives






68

We have a wide range of spare parts available for all Someco Welders.

Someco Welders

control panel






69

Recommended Spare Parts for Someco Welders

53-0230 53-0230A 53-025853-0757

Promac coDe Someco Part No DeScriPtioNelectrical itemS53-1000 20016C50009 5 BUTTON MEMBRANE PANEL (5 BUTTON + E-STOP)53-1001 20016C60009 3 BUTTON MEMBRANE PANEL (3 BUTTON + E-STOP)53-1002 20016C3009 6 BUTTON MEMBRANE PANEL (6 BUTTON + E-STOP)53-1003 20016C40009 5 BUTTON MEMBRANE PANEL (5 BUTTON + E-STOP) SUNSHINE 53-0009 DILOOM-10.24V AC CONTACTOR 24vDC 54-0010 20001090009 PIZZATO LIMIT SWITCH MV10 57-0600 20011470009 25amp SOLID STATE RELAY 53-0230 20003130009 E5EN-R3MTD-500-N - TEMP CONTROLLER 24v AC/DC (90mm x 45mm)53-0230A E5CN-Q2MTD-500 - TEMP CONTROLLER 24v AC/DC (45mm x45mm) 53-0757 NT2S-SF123B-E-V2 - MINI-TERMINAL (SINGLE PORT)53-0757A NT2S-SF122B-E-V2 - MINI TERMINAL (TWIN PORT) SOMTC 1mtr THERMOCOUPLESOMTC1.5 1.5mtr THERMCOUPLESOMTC2 2mtr THERMCOUPLEPNeumatic itemS53-0011 858.2.52.1.9 - PNEUMAX VALVE 53-0249 1260.32.275 - HEATER PLATE CYLINDER 53-0253 21001250003 BURN & SQUEEZE CYLINDER 53-0254 2100126003 BRASS CYLINDER53-0255 21001079 CABLE CYLINDER53-0270 105.328/2 105.32.8/2 - PNEUMATIC BRAKE VALVE53-0258 G1020330-200 - CLAMP CYLINDER mechaNical itemS53-0005 SHORT METAL ENCLOSURE 53-0004 LONG METAL ENCLOSURE 53-0501 SETTING PLATE SPRING & RIVET 53-050453-0507 23002770003 BRASS BUSH FOR WINDING HANDLE53-0514 23003066 SETTING PLATE V BAR PANTO PANTOGRAPH COMPLETE 53-0418 PANTOGRAPH BRACKET heater PlateS53-0302 2004143 V SHAPE HEATER PLATE (5 Series Welder) 53-0303 20004020003 L SHAPE HEATER PLATE (7 Series Welder)53-0304 2004060003 V SHAPE HEATER PLATE (8 Series Welder) FeNceS53-0405 23005300003 3 PART FENCE (5 Series welder) 53-0406 23003343 3 PART FENCE (7 Series welder) 53-0431 23005333 SHORT SIDE FENCE (8 Series Welder) 53-0432 23005A30003 LONG SIDE FENCE (5 & 8 Series welders) 53-0430 TOP HAT BUSH FOR FENCES53-0006 23002643 ECCENTRIC PIN FOR FENCES53-0024 GN.31516 M8 TEE NUT

53-1000 53-1001 53-1002 53-1003






70

Tecno Prima PR201 Welder

Tecno Prima PR240 Welder






71

Recommended Spare Parts for Tecno Prima Welders

Promac coDe tecNo Prima Part No DeScriPtioNelectrical itemS49-0001 RS.UA CYLINDER SWITCH49-0002 POWER SUPPLY (AS5/5/24M) 53-0230A E5CN-Q2MTD-500 TEMP CONTROLLER 24V AC/DC (45MM X 45MM)49-0008 2000100609 OMRON PROMXIMITY SWITCH - E2A-M12LS04WPB1249-0009 2000101609 OMRON PROXIMITY SWITCH - E2A-S08LS02WPB12M 49-0012 2101802009 SENSOR UAC157-0600 20011470009 SOLID STATE RELAY 25AMPSOMTC 1MTR THERMOCOUPLESOMTC1.5 1.5MTR THERMOCOUPLESOMTC2 2MTR THERMOCOUPLEPNeumatic itemS49-0014 2435.53.31.25.05 PNEUMAX VALVE49-0054 1260.25.85.AT SETTING PLATE CYLINDER49-0054A 1280.25.80.AT SETTING PLATE CYLINDER49-0015 N335.OA PNEUMAX MINI SOL COIL 24VACmechaNical itemS49-0004 H.P.S.A NEW STYLE PANTOGRAPH49-0025 SPRING STEEL PLATE FOR PANTOGRAPH49-0011 2700800309 SETTING PLATE SPRING49-0013 2900305009 HEAT RESISTANT PLATEheater Plate49-0100 V SHAPE HEATER PLATE49-0023 HEATER PLATE BRACEFeNceS49-0050 2300470003 BACK FENCE - 14mm x 38mm x 145mm (LH)49-0051 2300471003 FRONT FENCE - 14mm x 38mm x 122mm (LH)49-0052 2300474003 BACK FENCE - 14mm x 38mm x 145mm (RH)49-0053 2300475003 FRONT FENCE - 14mm x 38mm x 122mm (RH)49-0005 2300201003 PIN FOR BACK FENCE49-0006 2300202003 ECCENTRIC PIN FOR BACK FENCE

49-0001

49-0050

49-0009

49-0051 49-0052

49-0005 49-0006






72

STB SD500 Electronic Saw

STB F101 Copy Router

STB F130 Copy Router

Double-head hydro-pneumatic mitre saw with ascending retractable blades, with fixed LH and movable RH.

Cutting unit tilting up to

axis (LH towards right and RH towards left).

Possibility of reaching intermediate angles by means of mechanical stop.

Single-head copy router designed to perform undersize workings on aluminium and PVC profiles. It carries out with accuracy every kind of milling (lockpickings – cylinders – locks).

Milling head feed by means of lever.

Copy router with vertical copying head and horizontal 3 spindle-drilling unit. Designed for drilling and milling handle-holes and lock-pickings on aluminium and PVC profiles.

Manual motion of milling head by means of lever and pneumatic clamps for blocking the workpiece.






73

Recommended Spare Parts for STB

Promac coDe StB Part No DeScriPtioNelectrical itemS45-6B3272801 6B3272801 PUSH BUTTON45-5C0208209 5C0208209 TRIGGER SWITCH45-5G5199027 5G5199027 THERMOCOUPLE (SCREW TYPE)45-5G5199001 5G51990001 THERMOCOUPLE (RING TYPE)45-5C0208208 5C0208208 ELECTRIC SWITCH FOR ROUTERPNeumatic item45-6A2233536 6A2233536 BURN & SQUEEZE CYLINDERmechaNical itemS45-9C1892723 9C1892723 PANTOGRAPH45-4C3292325 4C3292325 SETTING PLATE SPRING - 30mm x 10mm45-4C3292326 4C3292326 HEATER PLATE RELEASE SPRING - 40mm x 100mm45-8D0515032 8D0515032 8MM COLLET45-8D0515060 8D0515060 NUT FOR MOTOR45-3Y0114010 3Y0114010 Y CASTING FOR THE SETTING PLATE

45-5G5199027

45-5G51990001

45-001517722

45-3y0114010

45-5C0208208

45-6A2233536

45-4C3292325

4C3292326

45-9C1892723






74

US226 - Vertical

US040 / US041 US541/US542

Promac Part No Pertici Part No DeScriPtioNelectrical item36-0003 21601 SAW BLADE MOTORmechaNical itemSUS107 981 332P MOTOR DRIVE BELT US648 1383 332P SAW BLADE GUARD RH HEAD US649 42117 332P SAW BLADE GUARD LH HEAD US066 949 TRACTION CABLE 3mmUS541 1302 332P BACK FENCE LH HEADUS542 1303 332P BACK FENCE RH HEADUS040 930 MALE TOOTHED JOINT US041 931 FEMALE TOOTHED JOINT US042 932 CLAMP CYLINDER HOLDERPNeumatic itemSUS225 1048 332P HORIZONTAL CLAMP CYLINDER (SVP27/80)US226 1047 332P VERTICAL CLAMP CYLINDER (SVP27/50)39-3400 3400 AZ CLAMP VALVE (11.044.4)99-0600 6mm x 1/8bsp STUD (FOR 39-3400)Saw BlaDe74-0004A 57301 330mm TCT SAW BLADE

36-0003US648 US225 - Horizontal

Recommended Spare Parts for Univer 332P Saw

Twin head saw on rigid base, left hand head fixed. Right hand head positioned via handwheel against metric

scale and calibrating magnifying lens attachment. The moving head is equipped with a clamping arrangement incorporating fine adjustment for accurate positioning.

Head rotation 45 degrees in and out with positive location and 0, 30 and 45 degrees, intermediate angles secured by thumbscrew clamp. Both heads have additional facilities

for tilt from zero to 45 degrees out.

Pertici Univer 332P Double Mitre Saw - 3.3 Metre Bed






75

Promac Part No Pertici Part No DeScriPtioNelectrical itemS36-27473 27473 ELGO MAGNETIC READER36-42165 42165 SAW BLADE MOTOR LH HEAD36-42166 42166 SAW BLADE MOTOR RH HEAD36-6830 6830 500M2K PC CONTROLLER36-6831 6831 500M2K PLC UNIT 36-6832 6832 500F2K PC CONTROLLER36-6905 6905 500D2K PC CONTROLLERPNeumatic itemS36-4150 4150 VERTICAL CLAMP CYLINDER 35/100 47-0001 4149 HORIZONTAL CLAMP CYLINDER 40mm x 200mm47-0009 VERTICAL CLAMP CYLINDER 40mm X 160mm 36-5855 5855 HOOD CYLINDER CPUIM 40/9039-3400 3400 AZ CLAMP VALVE (11.044.4)99-0600 6mm x 1/8bsp STUD (FOR 39-3400)Saw BlaDeS74-0009A 57329 500mm TCT SAW BLADE 74-0025 57334 520mm TCT SAW BLADE

36-42165 36-6830 36-683136-27473 36-415036-6832

Recommended Spare Parts for Univer 500 Electronic Saws

Electronic double head cutting machine with automatic mobile head carriage positioning movements.

Magnetic ruler length control system.

Minimum cutting length 222mm – 310mm, head angle

Pertici 500CD Electronic Double Head Cutting Machine






76

P101C / P101C10

39-3400

47-0001

P101N

36-0003

RDBTNA

Recommended Spare Parts for Pertici Univer Copy Routers

Promac Part No Pertici Part No DeScriPtioNelectrical itemSRDBTNA 1368 RED START BUTTON 42-2362 2362 BOTTOM TRIGGER SWITCH 42-2362A MICRO SWITCH FOR 2362 TRIGGER36-0003 21601 TOP DRIVE MOTOR 1.1kw (FC100/FC101/FC102) 41-9010 20902 TOP DRIVE MOTOR 0.55kw (FC105/FC106) 41-21101 21101 BACK ESPAG MOTOR (FC106/FC101)mechaNical itemSP101C 951 8mm COLLETP101C10 2287 10mm COLLET P101N 1628 NUT FOR COLLET (8mm & 10mm)41-9020 9020 FC100 PERSPEX GUARD P99B 2470 MOTOR DRIVE BELT FOR FC105/FC106 P101B 950 MOTOR DRIVE BELT FOR FC100/FC101/FC10241-2125 2125 FC 100/102 GAS STRUT 600N41-2077 2077 FC 100/102 GAS STRUT 300N41-2473 2473 FC 105/106 GAS STRUT 300N 41-101PD PADDLE FOR THE CENTERING ARMS41-4050 4050 WHITE CLAMP PADPNeumatic itemS47-0001 4149 HORIZONTAL CLAMP CYLINDER 40mm x 200mm39-3400 3400 AZ CLAMP VALVE (11.044.4)99-0600 6mm x 1/8bsp STUD (FOR 39-3400)

Recommended Spare Parts for - Univer ML142/ML141/ML140 Drainage Routers

42-9000N

42-9000A

42-2362

Promac Part No Pertici Part No DeScriPtioNelectrical itemSRDBTNA 1368 RED START BUTTON 42-2362 2362 BOTTOM TRIGGER SWITCH 42-2362A MICRO SWITCH FOR 2362 TRIGGER42-9000A 5048 ML142 42v MOTOR 42-9000N 21515 ML142N INVERTED MOTOR 36-0005 26419 MOTOR CONTACTOR MC1A310AT36-0007 26671 MOTOR CONTACTOR MC1A301AT36-0008 26693 AUXILLARY CONTACT MACL101ATmechaNical itemSP101C 951 8mm COLLETP101C10 2287 10mm COLLET P101N 1628 NUT FOR COLLET (8mm & 10mm)PNeumatic itemS39-3400 P3400 AZ CLAMP VALVE (11.044.4)99-0600 6mm x 1/8bsp STUD (FOR 39-3400)






77

VC733

38-5837

39-9002 LH39-9003 RH

Recommended Spare Parts for Univer VC721 / BS - 771

Promac Part No Pertici Part No DeScriPtioNelectrical itemS39-9002 21502 SAW BLADE MOTOR LH 39-9003 21501 SAW BLADE MOTOR RHmechaNical itemS39-6082 6082 VC721 DEPTH COUNTER (TSAX15)38-5837 5837 BS771 DEPTH COUNTER (TSOX15) VC730 VC730 BS771 ALUMINIUM CLAMP PAD 38-6065 6085 BS771 BLACK RUBBER CLAMP PAD 58-0002 BRASS FERIL FOR MEASURING STICK58-0003 1.5mtr MEASURING BEAD STICK (PROMAC)58-0007 3.0mtr MEASURING BEAD STICK (PROMAC)PNeumatic itemSVC733 733 BS771 VERTICAL CLAMP CYLINDER VC732 732 VC732 VERTICAL CLAMP CYLINDER SVP35/80VC728 728 VC721 ALUMINIUM CLAMP PAD39-3400 3400 AZ CLAMP VALVE (11.044.4)99-0600 6mm x 1/8bsp STUD (FOR 39-3400) Saw BlaDeS73-0020 874 103mm HSS SKIMMER BLADE LH (BS771)73-0021 873 103mm HSS SKIMMER BLADE RH (BS771)73-0026A 8322 225mm HSS SAW BLADE (Millenium) (BS771) 73-0026 8321 250mm HSS SAW BLADE (Millenium) (VC721)74-0004 250mm TCT SAW BLADE (VC721)

38-6065

This floor standing machine is equipped with two motors opposed at 45 degrees.

Motor carriage movement is actuated by variable speed pneumatic cylinder incorporated into the

clamping system.

Controls mounted on the operator console include the two hand safety control, motor start and pneumatic

clamping switches.

This floor standing machine is designed to cut two glazing beads in one operation . With blades inclined at 45 degrees and incorporating smaller back cutters one pair of beads are cut to length whilst preparing the first cut to the following pair.

Motor carriage movement is actuated by variable speed pneumatic cylinder incorporated into the clamping system. Controls mounted on the operator console include the two hand safety control, motor start and pneumatic clamping switches.

Pertici Univer VC721 Automatic V-Notch Saw

Pertici Univer BS - 771 Automatic Glazing Bead Saw






78

Italmac Machines

Onix 3300 - 3 axis

Spring S3 - 4 axis

ITM 500/C 4000

Onix 3300 is a 3 axis CNC machining centre, designed to drill and mill aluminium, light alloys and steel profiles up to 3 mm thickness.

Main features:

end-milling group system device

4 axis machining centre has been designed for drilling and milling on aluminium and light steel extruders and steel profiles on the 3 faces of the profile. It can handle bars up to 3 m long.

The 4th axis allows the electrospindle to be controlled by the

profile contour.Main features:

ITM 500/C is a double head cutting-off machine with 3

controlled axis. It is featured by an automatic movement of the right

unit managed by a CNC numerical control and by an internal/external

rotation of the cutting units. The control device is located at the front in a fixed and ergonomic

position for the operator.It is featured by a graphic panel to

easily read and set the data.

Motorized positioning of the heads by means of brushless engines and electronic management of the tilting for the

pneumatic system to fully cover the cutting areas. Vertical and horizontal clamps to firmly block the profile. Control device firmly located at the front with a 3.5” screen. The machine is equipped with an industrial PC, featured by a

mobile console for the connection to the network, data insertion and importing of cutting lists. Furthermore, an additional licence of the calculation software used by the client can be loaded up to comfortably manage the cutting

lists. Chip collecting plate, arranged to connect an extractor fan to remove the chips.






79

Recommended Spare Parts for Italmac Machining Centres

Recommended Spare Parts for Italmac Double Mitre Saws

italmac Part No Part DeScriPtioN SP0101 CLAMPING BLOCKING HANDLE

SP0102 PRECISION JAWS

SP0103 MILLING TOOLS

SP0104 TOOL HOLDER ISO 30

SP0105 PVC TOOL HOLDER SUPPORT

SP0106 PUMP FOR TOOL LUBRICATION

SP0107 ELECTRIC SPINDLE FAN

SP0108 CLAMP ALUMINIUM SUPPORT (ONIX)

SP0201 CLAMP ALUMINIUM SUPPORT (SPRING)

SP0109 ELECTRIC VALVE 5/2 M

SP0110 ELECTRIC VALVE 5/2 B

SP0111 ELECTRIC VALVE 3/2 NC

SP0112 CLAMP CYLINDER (ONIX)

SP0202 CLAMP CYLINDER (SPRING)

SP0113 CLAMP PVC VERTICAL BLOCK

SP0114 NOZZLE FOR TOOL LUBRICATION & JOINT

SP0115 CLAMP TOP SLIDING BLOCK HGH 25

SP0116 CLAMP LOWER SLIDING BLOCK EGH 20

italmac Part No Part DeScriPtioN SP0601 CLAMP CYLINDER

SP0602 PVC GREY ROLLER

SP0603 ELECTRICAL VALVE 5/2M






80

Part No. DeScriPtioN each £GR001 Demineralisation Filter £6.00

GR103 Fan Filter 1000mm x 5000mm x 20mm (Blue/White) £34.10

62-0003 Fan Filter 300mm x 450mm x 20mm (White) £3.00

62-0005A Framed Fan Filter 800mm x 800mm £30.50

62-0037 Framed Fan Filter 400mm x 500mm x 22mm £18.00

62-7001 Pre Filter For Rev/Osmosis £15.95

62-7002 Idro Rev Osmosis Blue Carbon Filter £79.99

62-7005A Internal Filter For Osmotic Unit £234.95

Part No. DeScriPtioN each £62-0315 Glass Washer Detergent (Per 5ltr) £28.50

93-0003 SP0724 - Fast Evaporating Cutting Oil (5ltr) £55.50

62-5800 Sapphire Hi Temperature Grease £33.08

79-0018 Fuchs - Renolit EP2 400g Cartridge - (600046880) £2.50

79-0019 Fuchs - Renolit LX EP2 400g Cartridge - (600046187) £3.50

Filters and Demineralisation Filter

Lubricants

62-7001 62-7002GR001






81

Part No. DeScriPtioN each £67-3511 Hand Seaming Tool £9.50

Part No. DeScriPtioN each £ +10 69-0010A Glazing Shovel (plastic) £2.60 £2.35

Part No. DeScriPtioN each £ +10 69-0004 Gasket Roller with Nylon Roller £9.50 £9.00

Part No. DeScriPtioN each £ +367-0005/6 6mm - Brass Hot Melt Guide £6.25 £5.95

67-0005/8 8mm - Brass Hot Melt Guide £6.25 £5.95







Seaming Tool

Glazing Shovel

Gasket Roller

Hot Melt Guides

Seaming tool for manual edge deletion of glass panes.






82

Part No. DeScriPtioN each £ +564-0001 TC17B Metal Handle Glass Cutter £15.10 £14.35

64-0003 TC17B/P Replacement Cutting Head £9.00 £8.55

Part No. DeScriPtioN each £ +564-0002 TC17P Plastic Handle Oil Filled Glass Cutter £14.50 £13.80

64-0003 TC17B/P Replacement Head £9.00 £8.55

Part No. DeScriPtioN each £ +564-0004 TC20 Wooden Handle Standard Glass Cutter £10.50 £10.00

64-0005 TC20 Replacement Cutting Head £8.20 £7.80

Part No. DeScriPtioN each £64-1000A 145 Degreee Cutting Head 4mm Cut (Black) £10.50

64-1000B 135 Degree Cutting Head 6mm Cut (White) £10.50

Metal Handle Oil Filled Glass Cutter

Plastic Handle Oil Filled Glass Cutter

Wooden Handle Standard Glass Cutter

Plastic Cutting Wheels






83

Part No. DeScriPtioN each £67-4500A Glass Thickness Meter £28.25

Glass Thickness Meter Simple device for measuring the overall thickness of glass, but also by reflection can tell you the thickness of each pane.

Part No. DeScriPtioN each £ +564-0017 Double Suction Lifter 60kg Load Capacity £26.75 £22.60

64-0018 Triple Suction Lifter 100kgs Load Capacity £33.35 £26.15

Suction Lifters






84

integral air floatation

linear guides

network

Hoptions

Glass Cutting Tables

Recommended Spare Parts for - MTL Glass Cutting Table (Cougar, Lynx, Panther)

PRoMAC PART No DESCRIPTIoN84-R163081 SMC OIL VALVE

84-R163975 BRACKET TO SUIT OIL VALVE (R163081)

86-0106 4mm O/D - 2.5mm I/D AIR LINE (PER MTR)

99-0410 PL 04-M5C - 4mm X M5(BSP) SWIVEL ELBOW

63-0081 TOOTHED BELT AT10 - 16mm WIDE - PER MTR

63-0081A TOOTHED BELT AT10 - 20mm WIDE - PER MTR

67-9044 NYLON STOP

62-SBE01021-M EDGE DELETION BOBBIN

64-1000B 135 DEGREE CUTTING HEAD - 6mm WHITE

64-1000 145 DEGREE CUTTING HEAD - 4mm BLACK

67-0001 TABLE FELT - 1MTR X 2MTR

67-0000 PVA ADHESIVE FOR TABLE FELT

93-0003 SP0724 - FAST EVAPORATING CUTTING OIL (CLEAR) 5LTR






85

ProMaC Part No Forel Part No. DeSCrIPtIoN62-0049 3480PP100M FILTER FOR NOZZLE

62-0048 34802015110 RINSING NOZZLE

62-0050 71073200 BRASS EXTENSION

62-35853108 35853108 BALL VALVE 3/2 TO "L" 1/2"

62-9950 23640700H200 GLASS CONVEYOR BELT (700H 200)

62-0078 23640800H200 DRIVE BELT (800H 200)

62-0079 236120850 MEGADYNE BELT SPA (850LP 868)

62-0305 23615AA075 AA75 ESA FLEX BELT

62-3005 52062200 NYLON WHEEL D=48

62-9031 230061500 "O"- RING D=48 - (TO SUIT 62-3005)

62-78500010073 78500010073 RACK WHEEL (NEW STYLE)

62-9032 52072200 SUPPORT FOR RACK WHEEL

62-0844 50010540 RUBBER TYRES - 77mm x 57mm x 37mm

62-3009 71070700 DRIVE SLEEVE - 56mm x 55mm

62-3001 70500013301 RUBBER DRIVE SLEEVE - 56mm x 46mm x 38mm

Recommended Spare Parts for Forel Glass Washer

device) system

VW Vertical Washing Machine






86

to the offset edge of the glass

width and type

self diagnostic options

Super Spacer Applicator

Coupling Press

APG Automatic Argon Gas Coupling Press

accuracy and speed

via internal fan unit

& mechanical limit switches

coupling up to 50mm thickness

coupling facility

95%






87

ProMaC Part No Forel Part No. DeSCrIPtIoN62-9811 4BAD12PNPI BALLUF SENSOR

62-9812 4BAD12ANALOGICO BALLUF SENSOR

62-5401 39101186 STRAIGHT CUT BLADE (0,6mm)

62-5402 70900011092 "V" SHAPED CUTTING BLADE

62-6910 70900011026 WHITE "V" TEFLON COUNTER PLATE

62-70900011088 70900011088 PROFILE PRESSING WHEEL

62-70900011005 70900011005 SCRAP EXTRACTION BLOCK

62-78500010073 78500010073 RACK WHEEL

62-9032 52072200 SUPPORT FOR RACK WHEEL (BLACK CRADLE)

62-6017 2364235RPPP525 TIMING BELT 235-RPP5

62-70930001116 70930001116 TIMING BELT RPP5 - SV.235 H25 -(SILICON)

62-2364AT10324580N 2364AT10324580N TIMING BELT AT10 -32 X 4580

62-6526 23640450H200 TIMING BELT - 450 X 200

62-6527 23640570H200 TIMING BELT 570 X 200

62-6022F 3006242Z SUPER SPACER BEARING

62-70900011006 70900011006 PIN FOR GUIDE WHEEL

62-7090 70900011023 SPACER FOR WHEEL BEARING

62-70900011010 70900011010 SPACER FOR HORIZONTAL WHEEL

ProMaC Part No Forel Part No. DeSCrIPtIoN62-3572 OB35X90P1 0108672 -SUCTION CUP - OB 35 X 90

62-5589 3222097 35PX10 - VACUUM GENERATOR FOR SUCTION CUP

62-0373 73032200 BLACK SUCTION CUP - D=50

62-0545 71051620 NYLON PLUG FOR LEVELLING FOOT

62-0546 71068520 NYLON PLUG FOR THIRD GLASS SUPPORT



62-3000 52012200 DRIVE SLEEVE - 75mm x 46mm x 56mm

62-0037 2142F16Z01 FILTER 400mm x 500mm x 22mm (FRAMED)

62-71002014319 71002014319 BOTTOM GAS RETAINING SEAL

62-2382VSIP56450AL 2382VSIP56450AL WHITE SILICONE PROFILE (PER MTR)

62-1867280SF 1867280SF002004 GAS MANIFOLD SEAL - 20 X 0.4 X 80

62-1867280SF0 1867280SF003008 GAS MANIFOLD SEAL - 30 X 0.6 X 80

Recommended Spare Parts for TSS200 Super Spacer

Recommended Spare Parts for Forel Coupling Flat Press Unit 080






88

the unit cavity

and depth detection

finishing

Polysulfide and Silicone

library and diagnostic option

and other Hybrid Warm Edge spacer bars.

options

Automatic Sealing Robot

PBN Automatic Spacer Bar Bender






89

ProMaC Part No Forel Part No. DeSCrIPtIoN62-0081A 4THTR6000450 STANDARD THERMOCOUPLE 4 x 50 - 3 WIRE

62-0081B 4THTRPRIC0001 NEW SPATULA THERMOCOUPLE

62-0084 53087202 HEATER ELEMENT -150WATT D=6.5 x 50 PT100

62-0084D 470316005000601 80W NEW SPATULA HEATER ELEMENT

62-3152 72002004004 NEW STYLE SPATULA

62-11111 COMPLETE NOZZLE BLOCK VALVE SEAL KIT

62-22222 COMPLETE NEW & OLD DOSER VALVE SEAL KIT

62-33333 COMPLETE DOSER SEAL KIT

62-0016 230001141 SEAL OR114 VITON

62-3075 71087511 INSERT SPOUT NOZZLE - 9-12mm x 3mm

62-3076 71077511 INSERT SPOUT NOZZLE - 15-20mm x 9mm

62-3079 72001354627 INSERT SPOUT NOZZLE -18-25mm x 13mm

62-4000 52036780 "V" SHAPED BLACK NYLON RUNNER

84-R270136 270136 STEEL COTTER PINS

62-7025 71064290 "V" SHAPED ROLLER FOR MIDDLE SUPPORT



62-4901 70071121 BRACKET TO SUPPORT TORPEDO (SCRAPPER)

62-4900 71024680 BRACKET TO SUPPORT TORPEDO (SCRAPPER)

62-3002 50062850 WHITE SILICON SLEEVE 77mm x 55mm x 35mm (M)

ProMaC Part No Forel Part No. DeSCrIPtIoN62-0377 4246DY59BL MAGNETIC SENSOR

62-4246020 4246020 MAGNETIC SENSOR - D-C73L 24V VCC 5-40

62-2364AT1016560 2364AT1016560 TIMING BELT - AT10 H16 SV560

62-72300372003 72300372003 REVOLVER SHAFT SLIDING PIN

Recommended Spare Parts for Forel SAHM20 Hotmelt Sealing Robot

Recommended Spare Parts for Forel PBN Automatic Spacer Bar Bender






90

ProMaC Part No iDro UNit Part No. DESCriPtioNGR001 Ref 3 DEMIN FILTER 5 MICRON

62-7001 Ref 1 PRE-FILTER

62-7002 Ref 2 BLUE CARBON FILTER

62-7006 Ref 1/1A/1B/1C PRE-FILTRATION UNIT COMPLETE

62-3124 IDROPERM 3 FOR OSMOSIS PLANT 10 LTR

62-7012 Ref 4 METERING PUMP

62-7021 Ref 4A METERING PUMP INFERIOR JOINT

62-7023 Ref 4B METERING PUMP VALVE

Recommended Spare Parts For The IDRO Unit






91

ProMaC Part No iDro UNit Part No. DESCriPtioN62-7012A Ref R IDRO 60/130 MOTOR

62-7005 Ref P OSMOTIC MEMBRANE FOR IDRO 60/130

62-7005A INTERNAL MEMBRANE FOR IDRO 60/130

62-7013 Ref S IDRO 60 REVERSE OSMOSIS PUMP

62-7010 Ref S IDRO 130 REVERSE OSMOSIS PUMP

Recommended Spare Parts For The IDRO Unit


Pro

motional

codes

ProSParE13

10% Discount on spare parts order over £350 to a maximum of £1000.

This code can not be used in conjunction with any other offer or discount and must be redeemed within 2013.

ProTooL13

10% Discount on Air Tools when you spend over £250.


ProSHIP13

Gives you free delivery of any order for consumables in 2013.


ProBLaDE13

10% Discount on saw blades when you spend over £100.


*Each promotional offer can only be redeemed once during 2013


Pro

motional

codes

ProGrooVE13

10% Discount on all U-R-B-A-N Genuine Grooving Knives.


ProaIrKIT13

Receive a free service kit for orders on air tools over £150.


ProTraVEL13

Free of charge travelling time for every annual service contract.


ProSErVE13

20% off standard onsite labour rates (restricted to one site visit).


*Each promotional offer can only be redeemed once during 2013






94

Conditions of Sales 1. GENERAL

(a) All quotations offers tenders and contracts are subject to the following conditions unless varied by express agreement in writing as hereinafter provided. The words “the Company” means Window Machinery Sales Limited and the words “the Customer” means the person, firm or company to whom the quotation offer or tender is addressed.

(b) These conditions shall form part of the tender or order contained overleaf. In the case of a tender any acceptance thereof shall be deemed to include these conditions to the exclusion of all other conditions or terms. This document contains all the conditions upon which the Company is prepared to enter into a binding agreement for the sale of the goods specified in the quotation annexed hereto. Any other terms, including any terms which may be implied by custom or trade usage upon which the Customer wishes to rely must be communicated to the Company prior to its acceptance of an order and approval of such terms must be expressed by the Company in writing and signed by a Director prior to such acceptance.

(c) All orders and contracts shall be evidenced in writing.(d) Quotations, offers and tenders are for the whole of the goods or services to which the tender overleaf relates, or for

which the Company has quoted, and the Company expressly reserves the right to refuse to accept any order which constitutes part only of the goods or services forming the subject of such quotation offer or tender.

2. DRAWINGS, DESCRIPTIVE DOCUMENTS AND BROCHURES(a) The weights, dimensions, capacities, prices and performance ratings and any other data or information contained in

the Company’s catalogues, prospectuses, circulars, advertisements, illustrated matter, drawings and price lists are not intended to be representations of facts or opinion and are an approximate guide for information only and do not involve the Company in any liability where any specific installation fails to obtain equivalent results. No statement, description, condition or representation contained in such catalogue or other material shall be constructed so as to enlarge, vary or over-ride the tender set out overleaf or these conditions.

(b) The Company expressly reserves the right at their sole option to include any uncatalogued improvements or alterations to its goods.

3. DELIVERIES(a) Delivery terms are subject to confirmation after receipt of order. The delivery date given in the tender is the

Company’s best estimate at the time of tender, and is subject to delays occasioned by sale prior to receipt of firm order. A firm estimate of delivery will be made with confirmation of order.

(b) The Company cannot accept orders under penalty for late delivery and shall not be liable for delay in delivery of the goods.

(c) The Company’s responsibility for the goods ceases when they have been delivered on the terms and at the delivery point stated and no claims for damage in transit shall be accepted unless the Company and the Insurers are notified within the terms of the policy or the certificate.

(d) The Purchaser shall not be entitled to recind the contract if delay or failure to supply goods is due either directly or indirectly to an outbreak of hostilities (whether war is declared or not) in which the United Kingdom or country of manufacture of the goods is involved, or to strikes, lockouts, breakdowns, delays in transport, accident, Government prohibition or restrictions, labour difficulties, fire or any other cause.

(e) In the event of any of the circumstances set out in Sub Clause (d) above, or in the event of a National Emergency or if the Company’s works or those of the Company’s suppliers, should become directly or engaged on Government orders under priority, and other orders become thereby delayed, the Company shall be entitled at any time on notice to the customer, to make partial deliveries only or to determine the contract without prejudice in any case to rights accrued in respect of deliveries already made.

4. PAYMENT(a) Unless otherwise agreed by the Company in writing, payment shall be due immediately following the delivery and

installation of the goods on all goods supplied on a cash sale basis. Goods supplied on a hire purchase, lease-purchase or lease basis shall be subject to settlement in full on advice to the customer of their availability.

5. PRICES(a) All prices which are quoted or which are terms of contract, are subject to variation in the event of the increase

or decrease in any of the following: wages or cost of materials in the country of origin of the goods or the United Kingdom; the imposition of import surcharges; fluctuations in exchange rates; transportation costs or any additional charges or costs arising from government legislation. A certificate issued by the Company and signed by a Director stating the amount of the increase or decrease in the price shall be deemed to be conclusive.

(b) The prices tendered are for the delivery date shown in the tender. In the event that the Customer’s order is received too late for delivery to be made by that date, and if by the date that the goods are ready for delivery a new price for the goods has been issued by the Company, then the price prevailing at the date of delivery shall be deemed to have been substituted for the tender price.






95

Conditions of Sales (c) The prices tendered are ex works prices and if the Company shall agree to deliver to a place in the United Kingdom,

designated by the Customer, the Customer shall in addition to the price of the goods, pay any costs or charges incurred by the Company in effecting such delivery. In addition the Customer shall pay all costs of installing the goods, including such costs or charges incurred by the Company.

6. TITLE AND RISK The property in the goods shall not pass to the Customer until the Customer has paid to the Company the whole price

thereof. If notwithstanding that the property in the goods has not passed to the customer the customer shall sell the goods in such manner as to pass to a third party a valid title to the goods the customer shall hold the proceeds of such sale on trust for the Company. The Customer agrees that prior to the payment of the whole price of the goods the Company may at any time enter upon the customers premises and remove the goods therefrom and that prior to such payment the customer shall keep the goods separate and identifiable for this purpose. Nothing herein shall constitute the customer the agent of the Company for the purpose of any such sub-sale. Notwithstanding that property in the goods shall not pass to the customer save as provided above the goods shall be at the risk of the customer from the time of collection by or delivery to him of the goods or after the expiration of any agreed rent free period whichever is the earlier.

7. REPLACEMENTS OF FAULTY MATERIALS ETC The Company warrants that the goods supplied are manufactured free from defects in materials, parts will be replaced

free of charge and ex works Rugby, within the warranty period of 6 months provided the customer gives the Company immediate notice of such alleged defects and returns the defective parts to the Company’s factory prepared by the customer for the Company’s This will not include labour which will be charged at the rate applicable at the time of receipt of written order to cover service call.

The warranty has effect from the date of commission and it is reduced in proportion when the goods are working for more than a daily shift considered to be eight hours duration. The Company’s liability to the customer is limited to such adjustment as the manufacturer makes to the Company. The Company shall not in any event be liable for consequential damage. This warranty shall not apply to any equipment that shall have been damaged by misuse, neglect or failure to perform maintenance as directed. This warranty shall be null and void either if the goods are used in a manner contrary to instructions or after malfunction if notified or if the customer does not honour the terms of payment hereof or if the goods are modified or altered without the agreement of the Company.

8. ACCEPTANCE The Customer shall inspect the goods immediately on the arrival thereof at the agreed point of delivery, and shall within

three days from such inspection, give notice in writing to the Company of any matter or thing by reason whereof he alleges that the goods are not in accordance with the contract. The Customer shall pay for the goods in accordance with the terms of this tender and shall not be entitled to reject the goods until the Company has had a reasonable opportunity to investigate and perform such further work upon the goods as the Company may consider necessary. If the Customer fails to give such notice the said goods shall be deemed to be in all respects in accordance with the contract, and the Customer shall be bound to accept and pay for the same.

9. PAYMENTS MADE TO THIRD PARTIES In any case where the Company passes on any payment made by the Customer to a Supplier to the Company, and the

goods for any reason are not supplied, then the obligation of the Company to return any such payments to the Customer shall be limited to the amount (if any) which the Company is able to recover from the Supplier.

10. SALE BY DESCRIPTION OR WITH REFERENCE TO SAMPLE (where applicable)(a) The goods described in the tender overleaf shall be deemed to correspond with their description if they correspond

with the sample which has been produced to and examined by the Customer, and further such description is given by way of identification thereof only, and the use of such description shall not constitute a sale by description.

(b) Notwithstanding that a sample of the said goods has been exhibited to and inspected by the Customer, such sample shall be deemed to have been exhibited and inspected solely to enable the Customer to judge the quality of the product and not so as to constitute a sale by sample. The Customer shall take the goods at his own risk as to their corresponding with the said sample or as to their quality condition or sufficiently for any purpose.

11. LAW APPLYING TO CONTRACT Any contract which may arise between the Company and the Customer as a result of this tender, shall be construed and

operated in all respects as a contract made in England and in conformity with English Law.






96

A

Air Drills 6

Air Fittings 16-17

Air Router Body 11

Air Vacuum 14

Airline Accessories 15

Allen Keys 39

B

BJM Cutting Centre 60

BJM Spares 61

Blow Guns 15

C

Carbide Router Cutter 22

D

Dentist Drill 10

Dentist Drill Burrs 10

Detergents and Cleaners 19

Die Grinders 10

Don Carlos Knife 30

Dual Action Sander 12

E

Ear Defenders 48-49

Economy Gasket Shears 35

Espag Threaded Drills for Triple Drill Gearboxes 23

F

Filters and Demineralisation Filter 80

Flipstop 55

Forel Automatic Sealing Robot 88

Forel Coupling Press 86

Forel PBN Automatic Spacer Bar Bender 88

Forel Spares 87-89

Forel Super Spacer Applicator 86

Forel VW Vertical Washing Machine 85

IndexG

Gasket Roller 81

Gasket Scissors 34

Gasket Shears Original Lowe 35

Glass Thickness Meter 83

Glaziers Knife 31

Glazing Shovel 81

Grooving Knives 25

H

Hand Miller Router Bits 23

Handsaws 28-29

High Speed Steel - H.S.S. Saw Blades 27

Hot Melt Guides 81

I

Idrotecnica Spares 90-91

Impact Wrench 14

Italmac Machines 78

Italmac Spares 79

J

Jitterbug Sander 12

Jobber Drills 7

K

Kip Lock Handles 39

KONIG Colour Repair Pens 40

KONIG Window Doctor Repair Kit 40

L

Lowe Mitre Cutter 35

Lubricants 18-19

M

Metal Handle Oil Filled Glass Cutter 82

MLT Glass Cutting Tables 84






97

N

Nedo Measuring Equipment 54

P

Palm Sander 12

Pedrazzoli Brown 250 Steel Cutting Saw 58

Pegic GP300 57

Pegic MEC 250 57

Pertici Spares 74-77

Plastic Handle Oil Filled Glass Cutter 82

Pliers 36

Printers and Labels 51

PTFE Tape 15

PTFE-Coated Fabric 53

Q

Quick Grip Clamps 38

Quick Release Fittings 15

R

R250 Glazing Bead Saw 56

Rapid Cutting Machines 62

Rapid Spares 63

Riveter 14

Router Cutters Single Spiral 20

Router Cutters Twin Spiral 21

Router Cutters Twin Straight 21

Router Cutters with Relief 21

Router Shoes 11

S

Safety Products 41-47

Sanding Discs 13

Sanding Paper 13

Screwdriver Bits 9

Screwdrivers 9

SDS Drills 8

Seaming Tool 81

Sisal Mops 11

Sisal Polisher 11

Solid Bolster Chisel 33

Someco Welders 68

Someco Welders Spares 69

Sprue Guide 31

Stanley Knives 32

STB F101 Copy Router 72

STB F130 Copy Router 72

STB SD500 Electronic Saw 72

STB Spares 73

Straight Drill 6

Suction Lifters 83

T

Tecno Prima PR201 Welder 70

Tecno Prima PR240 Welder 70

Tecno Prima Spares 71

Thomas Cut 250 Steel Saw 59

Thor Hammers 37

Tungsten Carbide Tipped - T.C.T. Saw Blades 26

U

Universal Cutter 35

Urban AKS 1805 / AKS 1810 64

Urban AKS Welders Spares 65

Urban AKS6600 64

Urban Original Grooving Knives 24

Urban SV530 66

Urban SV530/S 66

Urban SV530/SV530/S Spare 67

V

V-Cut Gasket Shears 34

W

Winbag 50

Wooden Handle Standard Glass Cutter 82

Work Bench Glide and Brush Strip 52

Index



Best Products, Value and Servicedelivered straight to your door

www.promac.co.uk3c Hadrians Way, Glebe Farm Industrial Estate,

Rugby, Warwickshire CV21 1STT:01788 577577 F:01788 567938 E:[email protected]


Promac Catalouge

Documents

Transcript of Promac Catalouge