projek overview...projek overview • Projek Chairs have been designed and tested for users weighing...
Transcript of projek overview...projek overview • Projek Chairs have been designed and tested for users weighing...
work chairs
seating price & user guide – May 27, 2019
projek overview
• Projek Chairs have been designed and tested for users weighing up to 300 lbs• Projek Task and Conference Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard
surfaces could result in unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection
• Task chair has a Synchro-tilt weight-balancing mechanism with 3 .5:1 ratio• Projek Task Chair is available in three assembly styles . Fully Assembled, Not Fully Assembled and Assembly Required . Customer
is responsible for on-site assembly when Fully Assembled is not Specified• See Multi-Use Chair Section for the corresponding Projek Conference Chair (NPRC)
Projek is a chair for all people and environments. The family includes a swivel stool, task, conference and guest chair.
Optional fixed headrest
Shrinx Mesh
Lumbar Apex Adjustment of 4"
Weight Balancing Synchro-Tilt Motion
2"3/8" (60mm hard casters are standard)
Tension Control
Optional 4D Pivoting Arm Caps pivot 210˚ (with auto safety lock) and provide alternate depth with 3" of inset .
Seat Depth Adjustment of 3"
Tilt Limiter / Back Lock Optional Arm Width Adjustment (2D and 4D Arms)
Seat Height Adjustment of 4"
Optional Arm Height Adjustment or Fixed Arm
Plastic or Aluminum Five Star Base
Statement of Line
Swivel Stool – No Arms
Swivel Stool – 2D Arms
Swivel Stool – 4D Arms
Swivel Stool – With Headrest
Guest Chair –Cantilever
Conference Chair
High Back – No Arms
High Back – Fixed T-Arms
High Back – 2D Arms
High Back – 4D Arms
With Headrest
(model classified as Multi-Use Chair)
work chairs
seating price & user guide – May 27, 2019
projek finish guide
Task Chair and Stool:• The headrest’s frame and fabric finishes default to the Outer Frame Finish and Seat Fabric Finish (Assembled Task Chair and Stool
only)• 2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame .
Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony onlyGuest and Conference Chair:• Lumbar Element not included• Arm Rest in Ebony only
Plastic Outer Frame
Plastic Inner Frame
Plastic Lumbar Element
Shrinx Mesh Back
Arm Rest
Arm Rest Pad
When selecting finishes for the Inner and Outer Frame, Lumbar and Mesh of the Projek family of chairs, Task Chair and Swivel Stool, it is possible to select different finishes for the components listed below or to have the same finish specified throughout.
Arm Support
Arm Rest
work chairs
seating price & user guide – May 27, 2019
projek dimensions & material requirementsA
rm H
eigh
t fr
om S
eat
Fixe
d T
-Arm
s -
7 3-
4"2D
7 5
/8"
- 11
1/2
"4D
7 1
1/16
" -
11 3
/8"
Width Between Arms Fixed T-Arms - 19 3-4"2D 18" - 20 5/8"4D 17 3/8" - 20 1/4"
Seat
Hei
ght
from
Flo
or
Tas
k St
anda
rd 1
6" -
20"
Tas
k H
igh
16 5
/8"
- 21
1/2
"T
ask
Low
14
1/8"
- 1
7"Sw
ivel
Sto
ol 2
2 1/
2" -
30
1/2"
Bac
k H
eigh
t fr
om S
eat
22 -
5/8
"
Hea
dres
t7-
1/4"
Seat Depth 16 1/4"- 19 1/4"
Back Width 18"
Lumber Apex Height5 3/4" - 9 1/2"
Seat Width 20 1/4"
Angle between Seat and BackTask 96.3˚-116.2˚Swivel Stool 96.3˚
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
Ove
rall
Hei
ght
Tas
k 38
5/8
" -
42 5
/8"
Swiv
el S
tool
44
5/8"
- 5
2 5/
8"
Overall Width 29 1/4"
Overall Depth 29 1/4"
DUAL UPHOLSTERED COM COL [yards] [sq . ft]
Seat 7/8 8 3/4Headrest 1/2 4 7/8
WEIGHTGeneral Use/Executive Task 35 lbsSwivel Stool 41 .8 lbs
Task Chair
work chairs
seating price & user guide – May 27, 2019
projek dimensions & material requirements (continued)A
rm H
eigh
t fr
om S
eat
7 1/
2"
Width Between Arms 19 3/4"
Seat
Hei
ght
from
Flo
or
18"
Bac
k H
eigh
t fr
om S
eat
17 1
/2"
Seat Depth 19"
Back Width 18 3/4"
Seat Width 19 1/4"
Angle between Seat and Back108˚
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
Ove
rall
Hei
ght
35 1
/2"
Overall Width 23 3/4"
Overall Depth 22 1/2"
DUAL UPHOLSTERED COM COL [yards] [sq . ft]
Guest Seat 7/8 8 3/4
WEIGHTCantilever Guest 18 .4 lbs
Guest Chair
work chairs
seating price & user guide – May 27, 2019
projek adjustment features & instruction
SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT
4D ARM PIVOT ADJUSTMENT ARM HEIGHT ADJUSTMENT
BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT
Seat height can be adjusted by pulling outward on the button below the seat on the right hand side . When this button pulled, the weight of the body will cause the seat to lower, and releasing it stops the seat at the desired height . Pulling outward on the button with no weight on the seat allows it to rise .
To adjust the seat depth, pull outward on the button below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward . Release button to lock the seat in place .
To pivot the arm cap, depress the auto safety lock button on the outside of the armrest and pivot 210˚ degrees to desired position . Release the button to lock in place . 180˚ arm rotation adjusts the arm depth .
To adjust the arm height, press the button below either arm rest to raise or lower it to the desired position . Release the button to lock in place .
Turning the grip found under the left side of the seat limits the back tilt travel and locks the back . Travel is limited on 3 positions with back lock in the upright position .
Fine tune the weight balanced tension by rotating the dial located below the seat center to suit personal preference .
work chairs
seating price & user guide – May 27, 2019
projek adjustment features & instruction (continued)
LUMBAR HEIGHT-ADJUSTMENT ARM WIDTH ADJUSTMENT
STOOL FOOT RING HEIGHT
The lumbar height-adjustment knobs can be found on the back where the Inner Frame connects to the Lumbar Element .The height of the lumbar support can be adjusted by sliding them up and down .
To adjust the width of each arm, turn the dial clockwise to release the arm lock . Slide the arm inward or outward to the desired position . Tighten the knob to lock the arm in place .
To raise or lower the stool’s foot ring, turn the foot ring’s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level . Turn the knob clockwise to lock in place .
work chairs
seating price & user guide – May 27, 2019
N P R T Projek – Synchro-Tilt Task Chair
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 3" and Lumbar height adjustment of 4"• Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges• Weight-balancing with a travel limiter synchro-tilt mechanism (3 .5:1 tilt ratio) with unique
preference control to tilt tension . Back recline angle range is 0° - 20° and seat adjustment range angle is 0°- 6 .5°
• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile• Headrest option is only available on Fully Assembled styleNOTESHeadrest’s frame and fabric finishes default to Outer Frame Finish and Seat fabric finish .2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame . Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony only
Projek Chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’s Standard and Graded-In-Fabrics on seat . See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details . Not all configurations are available in the Xpress program .Assembly Required (K) is further knocked-down and customer is responsible for assembly .
2D Arm
4D Arm
Fixed T-Arm
DESCRIPTION PRICE COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 785 806 826 847 868 888 910 931 950 1022Fixed Arms 871 893 913 934 955 975 997 1017 1036 11092D Width, Height-Adjustable T-Arms 899 919 940 961 981 1002 1024 1043 1063 11354D Width, Height-Adjustable T-Arms with Pivot Arm Cap 954 974 995 1016 1036 1057 1079 1098 1118 1190
Leather Leather Leather Leather LA LB LC LD
No Arms 963 991 1072 1099Fixed Arms 1050 1077 1158 11862D Width, Height-Adjustable T-Arms 1077 1104 1186 12134D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1131 1158 1241 1268
If Headrest (Y) is specified add 130 If Polished Aluminum (C9) Base is specified add 60 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) are specified add 0
Headrest
N No Headrest
Y With Headrest
Arm Style
N No Arms
F Fixed T-Arms
W 2D Width and Height-Adjustable T-Arms
P 4D Width and Height-Adjustable T-Arms with Pivot Arm Cap
Shrinx Mesh Back
S2 Ebony Original
S4 Veil Noir
S5 Veil Blanc
S6 Veil Grau
F1 Fleck Charcoal
F2 Fleck Smoke
F3 Fleck Dune
F4 Fleck Peat
Seat Upholstery
Finish
Fabric
Leather
Cylinder Style
1 Standard
2 High
3 Low
Plastic Outer Frame Finish
8B Ebony
8C Very White
Plastic Inner Frame
Finish
8B Ebony
8C Very White
Plastic Lumbar Element Finish
8B Ebony
8C Very White
Base Finish
52 Ebony
C9 Polished Aluminum
Casters/ Glides
(Optional)
~ Casters, Hard
A Casters, Soft
B Glides, Hard
C Glides, Soft
Assembly Style
F Fully Assembled
N Not Fully Assembled
K Assembly Required
PRODUCT OPTIONS
SAMPLE ORDER CODE
NPRT N N S2 L207 1 8C 8B 8B 52 A F
Xpress
work chairs
seating price & user guide – May 27, 2019
N P R T JProjek – Synchro-Tilt
Task Chair (CAL-TB133)
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 3" and Lumbar height adjustment of 4"• Back tilt can be locked in the upright position or left to free flow to 3 defined angle ranges• Weight-balancing with a travel limiter synchro-tilt mechanism (3 .5:1 tilt ratio) with unique
preference control to tilt tension . Back recline angle range is 0° - 20° and seat adjustment range angle is 0° - 6 .5°
• Available with Polished Aluminum Base• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile• Headrest option is only available on Fully Assembled styleNOTESHeadrest’s frame and fabric finishes default to Outer Frame Finish and Seat fabric finish .2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame . Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony only
Projek Chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’s Standard and Graded-In-Fabrics on seat . See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details .Not all configurations are available in the Xpress program .Assembly Required (K) is further knocked-down and customer is responsible for assembly .
2D Arm
4D Arm
Fixed T-Arm
Headrest
N No Headrest
Y With Headrest
Arm Style
N No Arms
P 4D Width and Height-Adjustable T-Arms with Pivot Arm Cap
Shrinx Mesh Back
S2 Ebony Original
S4 Veil Noir
S5 Veil Blanc
S6 Veil Grau
F1 Fleck Charcoal
F2 Fleck Smoke
F3 Fleck Dune
F4 Fleck Peat
Seat Upholstery
Finish
Fabric
Leather
Cylinder Style
1 Standard
2 High
3 Low
Plastic Outer Frame Finish
8B Ebony
8C Very White
Plastic Inner Frame
Finish
8B Ebony
8C Very White
Plastic Lumbar Element Finish
8B Ebony
8C Very White
Base Finish
C9 Polished Aluminum
Casters/ Glides
(Optional)
~ Casters, Hard
A Casters, Soft
B Glides, Hard
C Glides, Soft
Assembly Style
F Fully Assembled
N Not Fully Assembled
K Assembly Required
PRODUCT OPTIONS
SAMPLE ORDER CODE
NPRTJ N N S2 L207 1 8C 8B 8B C9 A F
DESCRIPTION PRICE
NO HEADREST (N) Grade 1 Grade 2 Grade 3
No Arms 888 909 9314D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1057 1078 1098
If Headrest (Y) is specified add 130 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) are specified add 0
CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies .
work chairs
seating price & user guide – May 27, 2019
N P R DProjek – Swivel Stool
FEATURES• Standard pneumatic cylinder provides height adjustment of 8"• Swivels 360˚• Includes Chrome footring• Seat depth adjustment of 3"• Lumbar height adjustment of 4"• Ebony base is available in plastic only• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tile
NOTESHeadrest’s frame and fabric finishes default to Outer Frame Finish and Seat fabric finish .2D and 4D Arm finish defaults to the Outer Frame Finish . For Very White the arm rest will be finished same as outer frame . Arm Rest Pad and Arm Support finished in Ebony . Fixed Arm is available in Ebony only
Projek Chair is Dual Upholstery with Shrinx Mesh available on the back only and Teknion’s Standard and Graded-In-Fabrics on seat .See Projek Finish Guide to define Plastic Outer Frame, Plastic Inner Frame and Lumbar Element finish details .
DESCRIPTION PRICE COM/ COL/NO HEADREST (N) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms 840 861 881 902 923 943 965 985 1004 10772D Width, Height-Adjustable T-Arms 954 974 995 1016 1036 1057 1079 1098 1118 11904D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1008 1029 1050 1070 1091 1112 1133 1153 1173 1245
Leather Leather Leather Leather LA LB LC LD
No Arms 1077 1098 1127 11542D Width, Height-Adjustable T-Arms 1190 1212 1241 12684D Width, Height-Adjustable T-Arms with Pivot Arm Cap 1245 1267 1296 1322 If Headrest (Y) is specified add 130 If Polished Aluminum (C9) Base is specified add 60 If Soft Casters (A) are specified add 21
Arm Style
N No Arms
W 2D Width and Height-Adjustable T-Arms
P 4D Width and Height-Adjustable T-Arms with Pivot Arm Cap
Headrest
N No Headrest
Y With Headrest
Shrinx Mesh Back
S2 Ebony Original
S4 Veil Noir
S5 Veil Blanc
S6 Veil Grau
F1 Fleck Charcoal
F2 Fleck Smoke
F3 Fleck Dune
F4 Fleck Peat
Seat Upholstery Finish
Fabric
Leather
Plastic Outer Frame Finish
8B Ebony
8C Very White
Plastic Inner Frame Finish
8B Ebony
8C Very White
Plastic Lumbar Element Finish
8B Ebony
8C Very White
Base Finish
52 Ebony
C9 Polished Aluminum
Casters/Glides (Optional)
~ Casters, Hard
A Casters, Soft
NPRD N N S2 L207 8B 52 A
PRODUCT OPTIONS
SAMPLE ORDER CODE
work chairs
seating price & user guide – May 27, 2019
N P R GProjek – Guest Chair
FEATURES• Stacks 4 chairs• Arms are finished in EbonyNOTESBack Inner Frame Finish is available in Ebony and Very White .Armrest is available in Ebony plastic only .Projek Chair is dual upholstery with Shrinx Mesh available on the back only and Teknion Standard and Graded-in Fabrics on seat . See Projek Finish Guide to define Plastic Outer Frame and Plastic Inner Frame finish details .
DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
Cantilever 654 676 697 720 742 763 785 807 829 895
Leather Leather Leather Leather LA LB LC LD
Cantilever 835 862 943 971If Chrome (C6) is specified add 84
PRODUCT OPTIONS
SAMPLE ORDER CODE
Base Style
C Cantilever
Shrinx Mesh Back
S2 Ebony Original
S4 Veil Noir
S5 Veil Blanc
S6 Veil Grau
F1 Fleck Charcoal
F2 Fleck Smoke
F3 Fleck Dune
F4 Fleck Peat
Seat Upholstery Finish
Fabric
Leather
Plastic Outer Frame Finish
8B Ebony
8C Very White
Plastic Inner Frame Finish
8B Ebony
8C Very White
Frame Finish
52 Ebony
C6 Chrome
NPRG C S1 M502 8C 8B C6