PROINTER AL ANODIZED AND POLISHED ALUMINIUM · 29 2017 PROINTER AL ANODIZED AND POLISHED ALUMINIUM...
1
29 PROINTER AL ANODIZED AND POLISHED ALUMINIUM PROINTER AL is a cove-shaped profile in anodized and polished aluminium. It is particularly suitable to ensure cleanliness and hygiene is suitable in indoors environment where good resistance to mechanical and chemical stresses are required. Its particular section and the availability in four finishes and special pieces, such as internal and external corners, make PROINTER AL a much sought after profile. The profile is easy to match with the wall covering and allows a workmanlike application. PI... 08 PI... 10 EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS 1. Choose “PROINTER AL” according to the tile thickness and desired finish. 2. Cut “PROINTER AL” to the desired length and apply the adhesive on the support where the profile will be laid. 3. Press the anchoring flange of “PROINTER AL” into the adhesive. 4. Lay the tiles, aligning them with the profile leaving a 2 mm joint. Remove immediately all remains of adhesive from the surface of the profile. 5. Fill the joints between the profile and the tiles with grout, in order to avoid water stagnation. Remove immediately all the remains of grout from the surface of the profile. SILICONE H 8 mm H 10 mm ANODIZED GOLD OR CHROMED ALUMINIUM thermo packed bar length 2,7 lm - pack. 40 Pcs - 108 lm POLISHED GOLD OR CHROMED ALUMINIUM thermo packed bar length 2,7 lm - pack. 40 Pcs - 108 lm Article H mm PIAA 08 8 PIAO 08 8 PIAA 10 10 PIAO 10 10 Article H mm PIBC 08 8 PIBO 08 8 PIBC 10 10 PIBO 10 10 INTERNAL, EXTERNAL, THREE-WAYS PROINTER CORNER JOINTS Varnisched PLASTIC for aluminium- pack. 10 Pcs Article REPI... (external corner) RIPI... (2 ways corner) RITPI... (3 ways corner) Available in the colours: BC - BO - AA - AO. The code of the selected colour must be added to the article code. Example for metal: RIPI... (chosen finish polished chrome BC) RIPIBC. To facilitate and complete the application of PROINTER in PIAA - PIAO - PIBC - PIBO aluminium internal and external corners are available to seamlessly connect the wall lining to ceramic tiles, wooden floors, parquet, etc. The connections are available with different finishes: Polished chrome & gold for PIBC - PIBO, anodised silver & gold for PIAA - PIAO. PROINTER can also be used to connect PROJOLLY. = On demand, price and delivery time to be agreed. COLOURS ANODIZED AA- Anodised silver alum. AO- Anodised gold alum. POLISHED BC- Polished chrome alum. BO- Polished gold alum. ANODIZED POLISHED AA- Anodised silver alum. AO- Anodised gold alum. BC- Polished chrome alum. BO- Polished gold alum. VARNISHED PLASTIC ANODISED AND POLISHED ALUMINIUM EFFECT JOINTS COLOURS
Transcript of PROINTER AL ANODIZED AND POLISHED ALUMINIUM · 29 2017 PROINTER AL ANODIZED AND POLISHED ALUMINIUM...
29
2017
PROINTER AL
ANODIZED AND POLISHED ALUMINIUM
PROINTER AL is a cove-shaped profile in anodized and polished aluminium. It is particularly suitable to ensure cleanliness and hygiene is suitable in indoors environment where good resistance to mechanical and chemical stresses are required. Its particular section and the availability in four finishes and special pieces, such as internal and external corners, make PROINTER AL a much sought after profile. The profile is easy to match with the wall covering and allows a workmanlike application.
PI... 08
PI... 10
EXAMPLES AND INSTRUCTIONS FOR LAYING METHODS
1. Choose “PROINTER AL” according to the tile thickness and desired finish. 2.Cut “PROINTER AL” to the desired length and apply the adhesive on the support where the profile will be laid. 3. Press the anchoring flange of “PROINTER AL”into the adhesive. 4. Lay the tiles, aligning them with the profile leaving a 2 mm joint. Remove immediately all remains of adhesive from the surface of the profile. 5. Fill the joints between the profile and the tiles with grout, in orderto avoid water stagnation. Remove immediately all the remains of grout from the surface of the profile.
SILICONE
H 8 mm
H 10 mm
ANODIZED GOLD OR CHROMED ALUMINIUM thermo packedbar length 2,7 lm - pack. 40 Pcs - 108 lm
POLISHED GOLD OR CHROMED ALUMINIUM thermo packedbar length 2,7 lm - pack. 40 Pcs - 108 lm
Article H mmPIAA 08 8PIAO 08 8PIAA 10 10PIAO 10 10
Article H mmPIBC 08 8PIBO 08 8PIBC 10 10PIBO 10 10
INTERNAL, EXTERNAL, THREE-WAYS PROINTER CORNER JOINTSVarnisched PLASTIC for aluminium - pack. 10 Pcs
ArticleREPI... (external corner)
RIPI... (2 ways corner)
RITPI... (3 ways corner)
COLOURS
Available in the colours: BC - BO - AA - AO. The code of the selected colour must be added to the article code. Example for metal: RIPI... (chosen finish polished chrome BC) RIPIBC.
To facilitate and complete the application of PROINTER in PIAA - PIAO - PIBC - PIBO aluminium internal and external corners are available to seamlessly connect the wall lining to ceramic tiles, wooden floors, parquet, etc. The connections are available with different finishes: Polished chrome & gold for PIBC - PIBO, anodised silver & gold for PIAA - PIAO. PROINTER can also be used to connect PROJOLLY.
= On demand, price and delivery time to be agreed.
COLOURS
A N O D I Z E D
AA - Anodised silver alum. AO - Anodised gold alum.P O L I S H E D
BC - Polished chrome alum. BO - Polished gold alum.
A N O D I Z E D P O L I S H E D
AA - Anodised silver alum. AO - Anodised gold alum. BC - Polished chrome alum. BO - Polished gold alum.
VARNISHED PLASTIC ANODISED AND POLISHED ALUMINIUM EFFECTJOINTS
COLOURS
